onsemi

MC14516BD - 3-18V Binary Up/Down Counter | onsemi

부품 번호: MC14516BD ✗ 단종
3.0 Vdc to 18 Vdc Vdss 16-SOIC, 0.154 inch body width Package
MOQ: 1 |

MC14516BD 개요

The onsemi MC14516BD is a synchronous 4-bit binary up/down counter built with MOS P-channel and N-channel enhancement-mode devices in a monolithic structure. It operates from a 3.0 Vdc to 18 Vdc supply, uses a 16-SOIC package, and includes diode protection on all inputs. The synchronous architecture allows the counting stages to change together rather than operating as separate ripple counters.

A binary up/down counter is a digital logic component that increments or decrements a four-bit numerical state according to direction-control and clock inputs. It belongs to the counter and arithmetic-function hierarchy within CMOS logic ICs. The MC14516BD is useful when a digital system must track a sequence in either direction, such as positioning, timing, indexing, or state progression, while retaining the familiar parallel binary-counter interface.

Key features include a 3.0 Vdc to 18 Vdc supply range, internal synchronous operation for high-speed counting, and diode protection on every input. These characteristics make the device appropriate for general-purpose digital control, clocked sequencing, and count-direction control. The 16-SOIC package is a surface-mount format that supports conventional reflow assembly and PCB routing without requiring a through-hole footprint.

The counter uses MOS P-channel and N-channel enhancement-mode devices in a monolithic implementation. Its internal synchronous operation provides coordinated state transitions when the clock advances the count. Direction control determines whether the binary output increments or decrements, allowing two counting behaviors to share one counter block. The manufacturer describes the circuit as a binary up/down counter and identifies all inputs as protected by diodes.

Typical applications include digital position and step tracking, programmable event counters, industrial sequencing logic, instrumentation timers, and control systems that need a reversible binary count. In these systems, the synchronous counter can be clocked from a defined timing source while external control logic selects count direction or clears the state. The broad 3.0 Vdc to 18 Vdc supply range accommodates both low-voltage CMOS logic and higher-voltage industrial interface environments.

Designers should use the manufacturer pin-description and connection diagrams when assigning PCB nets and should not infer inactive or reserved pins from abbreviated online descriptions. Input transitions, clock timing, reset behavior, and output-state requirements must be verified against the MC14516BD datasheet before high-speed operation. Decoupling practice should also follow the voltage rails used in the final system and the manufacturer application guidance.

This product page consolidates the verified device identity, supply range, synchronous-counter construction, protected-input feature, package information, source links, and same-footprint family alternatives. It also provides application guidance and engineering checks that support faster part selection without replacing the complete manufacturer datasheet.

드롭인 대체품: MC14516BD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MC14516BFG

✅ 드롭인
📦 16-SOIC
Same 16-SOIC MC14516B family and same 3.0 Vdc to 18 Vdc supply range; core counter specifications show 0% difference in the cited parameters.

📋 참조 대체품 (카탈로그에 없음)

MC14516BDR2

✅ 드롭인
📦 16-SOIC
Same 16-SOIC MC14516B family and same 3.0 Vdc to 18 Vdc supply range; functional specifications show 0% difference, with tape-and-reel order handling.

📋 참조 대체품 (카탈로그에 없음)

MC14516BDR2G

✅ 드롭인
📦 16-SOIC
Same 16-SOIC MC14516B family and same 3.0 Vdc to 18 Vdc supply range; functional specifications show 0% difference, with a distinct tape-and-reel order code.

📋 참조 대체품 (카탈로그에 없음)

MC14516BDG

✅ 드롭인
📦 16-SOIC
Same 16-SOIC MC14516B family and same 3.0 Vdc to 18 Vdc supply range; core electrical specifications show 0% difference in the cited parameters.

📋 참조 대체품 (카탈로그에 없음)

MC14516B

✅ 드롭인 ⚠️ 사양 미검증
📦 16-SOIC
Base MC14516B family counter with the same 3.0 Vdc to 18 Vdc supply range and internally synchronous operation; cited functional differences are 0%.

📋 참조 대체품 (카탈로그에 없음)

MC14516BD 최대 정격 & 전기적 특성

Product Type 4-bit synchronous binary up/down counter
Supply Voltage Range 3.0 Vdc to 18 Vdc
Counter Architecture Internally synchronous
Transistor Technology MOS P-channel and N-channel enhancement-mode devices
Input Protection Diode protection on all inputs
패키지 16-SOIC, 0.154 inch body width
Package Length 3.90 mm
실장 유형 Surface mount
Logic Family CMOS binary up/down counter
Counting Mode Binary up/down
핀 수 16 pins

MC14516BD 3.90 mm 핀 구성 가이드

MC14516BD(3.90 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MC14516BD의 3.90 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC14516BD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC14516BD 적합 용도: 6 애플리케이션s: Digital Position and Step Tracking, Programmable Event Counter, Industrial Sequencing Control, Instrumentation Timing and Indexing, Bidirectional Control-State Generator, Digital Up/Down Cycle Control.

🏭

Digital Position and Step Tracking

The MC14516BD fits a reversible position-counting block because it provides a binary up/down counter with internally synchronous operation across a 3.0 Vdc to 18 Vdc supply range. External control logic can select increment or decrement operation while a position sensor or step pulse advances the clock. The synchronous architecture keeps the binary state transitions coordinated, while diode protection on all inputs adds robustness around external control signals. Use the manufacturer pin-description and timing diagrams to define clock, direction, and reset behavior, and verify that the selected output count range matches the mechanical or electronic travel of the target system.

🔧

Programmable Event Counter

A programmable event system can use the MC14516BD to maintain a binary sequence count while direction logic determines whether accepted events should increase or decrease the state. Its 3.0 Vdc to 18 Vdc operating range allows deployment across multiple CMOS supply environments, and the internally synchronous counting architecture supports predictable clocked state changes. The MC14516BD is appropriate when the design needs a compact dedicated counter rather than general processor I/O. Confirm pulse-width limits, output-drive capability, and reset timing from the manufacturer datasheet before connecting sensors or long digital interconnects.

⚡

Industrial Sequencing Control

The MC14516BD can form the state-counting element of an industrial sequencing controller that advances through numbered phases or reverses when a process direction changes. Its 3.0 Vdc to 18 Vdc supply range supports integration with conventional CMOS control logic, while synchronous internal operation suits clocked state management. Direction-control logic can select upward or downward counting, while a reset path establishes the initial state. The design should provide stable clocking, define unused inputs according to the datasheet, and include appropriate supply decoupling and input conditioning for factory-environment noise.

🖥️

Instrumentation Timing and Indexing

In timing and indexing instruments, the MC14516BD can count clock intervals or position indices in either direction. The 4-bit binary format provides a compact state representation, while the internally synchronous counter architecture supports coordinated transitions on each accepted clock event. Its broad 3.0 Vdc to 18 Vdc supply range allows the counter to operate beside different CMOS logic families. For measurement systems, use a clean reference clock and isolate long sensor lines from the counter inputs. Validate timing margins, output rise and fall behavior, and system-level error budget before using the count value for a precision measurement.

🔧

Bidirectional Control-State Generator

The MC14516BD can implement a compact bidirectional state generator for control systems that must move forward or backward through a sequence. Setting the direction control selects whether the binary state increments or decrements, and the internal synchronous design coordinates the counter stages. Operation across 3.0 Vdc to 18 Vdc provides flexibility when combining the counter with multiple CMOS circuit groups. Decode the binary outputs to create phase commands, but account for decoder transition timing when multiple outputs can change after a clock edge. The complete MC14516B datasheet should govern output timing, supply limits, and unused-pin treatment.

⚙️

Digital Up/Down Cycle Control

A reversible cycle counter using the MC14516BD can alternate between increasing and decreasing counts under a direction-control signal. This arrangement suits process controllers, test systems, and mechanism controls that require repeatable forward and reverse counting. The MC14516BD's internally synchronous operation and 3.0 Vdc to 18 Vdc supply range support digital implementation across common CMOS voltage levels. Diode protection on all inputs is useful for control-signal interfaces, although the designer must still prevent excessive voltage, current, or inappropriate transitions. Confirm clock-edge behavior and counter-state limits before applying the outputs to external equipment.

What is the onsemi MC14516BD?
The onsemi MC14516BD is a 4-bit synchronous binary up/down counter operating from 3.0 Vdc to 18 Vdc. According to the ON Semiconductor datasheet, it uses monolithic MOS P-channel and N-channel enhancement-mode devices, includes diode protection on all inputs, and is supplied in a 16-SOIC package. It is designed for systems that need a binary count to advance or retreat under clock and direction control.
What are the key specifications of MC14516BD that engineers should know?
The MC14516BD combines a 3.0 Vdc to 18 Vdc supply range, internally synchronous counting, diode protection on all inputs, and a 16-SOIC package. The ON Semiconductor datasheet identifies it as a binary up/down counter constructed with MOS P-channel and N-channel enhancement-mode devices in a monolithic structure. These are the central characteristics for supply compatibility, counting architecture, input protection, and PCB footprint decisions.
Is MC14516BD a synchronous counter?
Yes, the MC14516BD is an internally synchronous binary up/down counter. The ON Semiconductor datasheet specifically identifies internal synchronous operation as a feature, meaning the counting stages are designed to operate synchronously rather than as independent ripple stages. The package is a 16-SOIC and the specified supply-voltage range is 3.0 Vdc to 18 Vdc.
What is the MC14516BD supply-voltage range?
The MC14516BD operates from 3.0 Vdc to 18 Vdc. This range is stated directly in the ON Semiconductor datasheet and covers a broad set of CMOS logic environments. When designing the circuit, confirm that every connected input and output remains compatible with the selected rail and does not exceed the device's absolute-maximum limits.
Where can I download the MC14516BD datasheet PDF?
The MC14516BD datasheet can be accessed through the linked ON Semiconductor datasheet pages on AllDataSheet, including the document result identified for the MC14516BD. The available MC14516B family document contains 12 pages according to its listing. Use the complete manufacturer datasheet for the pin-description table, timing characteristics, absolute-maximum ratings, and recommended operating conditions.
Where can I find the MC14516BD pinout?
The MC14516BD pinout is found in the pin-description and connection diagrams in the ON Semiconductor MC14516B family datasheet. The device is a 16-SOIC package, so the package drawing and pin table must be used together when assigning the counter's clock, direction-control, reset, and output nets. Do not infer unconnected positions from abbreviated catalog descriptions.
What can replace MC14516BD?
The MC14516BFG, MC14516BDR2, MC14516BDR2G, and MC14516BDG are same-family onsemi alternatives associated with the 16-SOIC MC14516BD footprint. Their electrical comparison should be confirmed against the relevant order-code documentation before substitution, particularly for environmental qualification and assembly format. The MC14516BDR2 and MC14516BDR2G are tape-and-reel order variants, so their reel packaging is not interchangeable with every shipment configuration.
Is MC14516BD the same as MC14516BFG?
The MC14516BD and MC14516BFG belong to the same onsemi MC14516B counter family and use the 16-SOIC format identified for the target. Their documented core characteristics align, including the 3.0 Vdc to 18 Vdc supply range and diode-protected inputs, but order-code handling and qualification details should be checked for the exact lot. Use the MC14516B family datasheet and ordering information for final approval.
MC14516BD vs MC14516BDR2 - which is better for production assembly?
Choose MC14516BDR2 when the assembly line requires a tape-and-reel presentation, and choose MC14516BD when the specified procurement form is acceptable for the assembly process. Both are identified as 16-SOIC MC14516B-family devices, so the family-level electrical architecture remains the same. The deciding factor is order-code and handling configuration rather than a change in counter function.
When should I choose MC14516BD over another MC14516B order code?
Choose MC14516BD when the 16-SOIC device and the MC14516B synchronous binary up/down-counter function meet the design and procurement requirements. Select another documented order code only when its assembly format, qualification, or ordering characteristics better match the production process. The key functional attributes to preserve are the 3.0 Vdc to 18 Vdc supply range, synchronous counting, and protected inputs.
Is MC14516BD suitable for an industrial sequencing circuit?
The MC14516BD is suitable for a sequencing circuit that requires a reversible binary count and a 3.0 Vdc to 18 Vdc operating range. Its internally synchronous operation and diode-protected inputs are useful in clocked digital control logic. For industrial deployment, confirm temperature limits, timing margins, output loading, and any required regulatory or automotive qualifications before releasing the design.
Where can I buy MC14516BD online?
Use the Request a Quote form on this page to request MC14516BD pricing, stock confirmation, lead time, and the required shipment format. The form allows purchasing teams to specify quantity, reel or other assembly packaging, and target delivery requirements. Current commercial details should be confirmed through the quote response rather than relying on an outdated catalog price.
What is the price of MC14516BD?
Request current MC14516BD pricing through the Request a Quote form on this page. The form supports quantity-specific commercial review and can account for the desired 16-SOIC shipment format. The price depends on order quantity, availability, and assembly packaging, so a current quote is more reliable than a static product-page amount.
What is the lead time for MC14516BD?
Request the current MC14516BD lead time through the Request a Quote form on this page. Include the required quantity, 16-SOIC delivery format, destination, and target production date so the commercial response can reflect the actual order. Inventory and manufacturing schedules can change, making a project-specific confirmation necessary before committing the build schedule.
Is MC14516BD in stock?
Request current MC14516BD stock status through the Request a Quote form on this page. State the required quantity and whether the shipment must be in tape-and-reel or another supported configuration. The quote team can then confirm available inventory and the expected fulfillment timing for the specific order rather than offering a generic stock statement.
What is the best onsemi equivalent for MC14516BD?
The MC14516BFG is the closest onsemi family alternative identified for the MC14516BD's 16-SOIC implementation, while MC14516BDR2, MC14516BDR2G, and MC14516BDG cover other documented order configurations. The ON Semiconductor MC14516B family documentation supports their shared counter architecture and 3.0 Vdc to 18 Vdc supply range. Validate the exact order-code requirements and qualification details before production substitution.

엔지니어링 참조 데이터: MC14516BD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC14516BD when the design requires a dedicated 4-bit synchronous binary up/down counter in an identified 16-SOIC onsemi order code. It is appropriate for reversible event counting, digital position tracking, phase sequencing, and instrumentation indexing across a 3.0 Vdc to 18 Vdc supply range. MC14516BFG is a reasonable same-family selection when its specific order-code characteristics better match procurement. MC14516BDR2 and MC14516BDR2G are appropriate when tape-and-reel assembly handling is required. MC14516BDG offers another documented family order code for review, while base MC14516B may suit broad family-level sourcing. In every case, verify the complete ordering information, operating-temperature limits, timing characteristics, pinout, and qualification requirements against the manufacturer documentation before releasing the PCB or production build.

대체품과의 비교

파라미터 이 제품 MC14516BFG MC14516BDR2 MC14516BDR2G MC14516BDG MC14516B
Brand onsemi onsemi onsemi onsemi onsemi onsemi
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Type Binary up/down counter Binary up/down counter Binary up/down counter Binary up/down counter Binary up/down counter Binary up/down counter
Supply Voltage Range 3.0 Vdc to 18 Vdc 3.0 Vdc to 18 Vdc 3.0 Vdc to 18 Vdc 3.0 Vdc to 18 Vdc 3.0 Vdc to 18 Vdc 3.0 Vdc to 18 Vdc
Counting Architecture Internally synchronous Internally synchronous Internally synchronous Internally synchronous Internally synchronous Internally synchronous
Input Protection Diode protection on all inputs Diode protection on all inputs Diode protection on all inputs Diode protection on all inputs Diode protection on all inputs Diode protection on all inputs
Internal Device Construction MOS P-channel and N-channel enhancement-mode devices MOS P-channel and N-channel enhancement-mode devices MOS P-channel and N-channel enhancement-mode devices MOS P-channel and N-channel enhancement-mode devices MOS P-channel and N-channel enhancement-mode devices MOS P-channel and N-channel enhancement-mode devices
Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins

주요 차별점

  • Dedicated internally synchronous up/down counting function (vs MC14516B)
  • Exact 16-SOIC order code for footprint-controlled procurement (vs MC14516BFG)
  • Protected digital interface for reusable counter designs (vs MC14516BDR2)

설계 노트

Route the clock, direction-control, reset, and four binary outputs according to the complete MC14516B pin-description table. Keep the 16-SOIC footprint mechanically compatible with the selected onsemi order code and verify pin 1 orientation on the PCB. For mixed-speed logic, terminate long external clock traces close to the receiving input and avoid routing the clock parallel to sensitive output or control lines.

Operate the MC14516BD only within its documented 3.0 Vdc to 18 Vdc supply range. Confirm that connected logic sources cannot exceed the absolute-maximum input limits under power-up, power-down, or fault conditions. Place the supply-decoupling network close to the device and return its ground path through a low-impedance plane, especially when the counter shares a board with switching converters.

Do not substitute a counter with the same function but a different pin arrangement without reviewing its pinout and truth table. Synchronous operation does not remove the need to respect clock pulse-width, rise-time, and setup requirements. Also avoid leaving control inputs floating; connect unused inputs to a defined valid level as directed by the manufacturer datasheet.

Keep the counter clock path short and provide a continuous ground reference beneath the device and associated logic. If the counter receives pulses from switches, sensors, or long cables, condition those signals before entering the protected inputs. The built-in diode protection should not be treated as a substitute for correct voltage limiting, debouncing, or isolation.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not provide definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for MC14516BD. Compliance must be confirmed for the exact order code and current manufacturer documentation.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

mc14516b datasheet mc14516b onsemi MC14516BD datasheet pdf MC14516BD pinout MC14516BD 16-SOIC pinout MC14516BD specifications MC14516BD supply voltage MC14516BD equivalent MC14516BD replacement MC14516BD vs MC14516BFG MC14516BD application circuit MC14516BD price MC14516BD stock onsemi MC14516BD binary counter

관련 부품 & 용어

onsemi MC14516BD MC14516B MC14516BFG MC14516BDR2 MC14516BDR2G MC14516BDG binary up/down counter 4-bit counter synchronous counter CMOS logic logic IC digital counter arithmetic function MOS P-channel device MOS N-channel device enhancement-mode device diode-protected input 16-SOIC SOIC package family surface-mount package 3.0 Vdc to 18 Vdc supply digital position tracking programmable event counting industrial sequencing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기