NXP Semiconductors

MC145170D2 - 185MHz PLL Frequency Synthesizer | NXP

MPN: MC145170D2 ✓ 啟用中
100 μA maximum quiescent Vdss 16-pin SOIC, 3.90 mm width Package 185 MHz Speed
MOQ: 1 |

MC145170D2 概覽

NXP Semiconductors MC145170D2 is a single-chip PLL frequency synthesizer with a maximum operating frequency of 185 MHz, supplied in a 16-pin SOIC package. It combines fully programmable R and N counters, an input amplifier, crystal-oscillator support, a programmable reference output, and both single-ended and double-ended phase detectors. The double-ended detector uses a linear transfer function without a dead zone, making the device suitable for precision phase-control and frequency-generation systems.

A phase-locked loop, or PLL, is a feedback-controlled timing circuit that locks an output frequency to a reference frequency. The PLL frequency synthesizer category sits within clock and timing integrated circuits, where it supports clock generation, frequency multiplication, modulation, and phase alignment. The MC145170 family was designed for direct use in MF, HF, and VHF bands, combining digital counters and analog phase-detection functions on one integrated circuit.

Programmable R and N counters allow the relationship between the reference input and synthesized output to be established by register programming. The device supports an external crystal at the input amplifier, while the programmable reference output provides a convenient reference for other system blocks. Its maximum specified quiescent supply current remains 100 μA, making it practical for low-power frequency-control equipment when the operating conditions permit low current consumption.

The MC145170-2 uses a more responsive power-on reset circuit than MC145170-1. According to NXP, both devices use the same chip with different power-on-reset mask options, and the MC145170-2 is recommended for new designs. This reset behavior is especially useful when a brief supply interruption could otherwise leave internal counters or the phase comparator in an incorrect state. The MC145170-2 is also identified as pin-for-pin compatible with MC145170-1.

Typical uses include local-oscillator generation in radio receivers and transmitters, FM and phase-modulation systems, frequency-agile communications equipment, industrial instrumentation, and low-power RF test equipment. The 185 MHz operating limit provides useful range for VHF designs, while the 16-pin SOIC package supports conventional surface-mount assembly. System designers should account for the required loop filter, reference source, divider programming, and decoupling network shown in the manufacturer’s application guidance.

For a new design, confirm that the selected reference frequency, counter ratio, loop bandwidth, and required reference output can be supported by the internal divider arrangement. Place the input and reference-network components close to their associated pins, use a clean and stable reference source, and verify startup and reacquisition behavior across supply interruptions. The D suffix denotes the 16-pin SOIC ordering option identified by the product listing.

This page combines the manufacturer’s device capabilities, package information, family compatibility details, application guidance, and drop-in replacement analysis. It also organizes the most important selection constraints into a practical guide for evaluating the MC145170D2 in PLL-based RF and timing designs.

直接替換替代品,適用於 MC145170D2 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MC145170D1

✅ 直接替換
📦 16-SOIC
Uses the earlier power-on-reset mask option, which is less responsive to momentary supply interruptions than the MC145170-2; maximum frequency and pin arrangement remain compatible.

📋 參考替代品(不在目錄中)

MC145170D2 規格

Device Type PLL frequency synthesizer with serial interface
Maximum Operating Frequency 185 MHz
供應電流 100 μA maximum quiescent
封裝 16-pin SOIC, 3.90 mm width
Operating Frequency Bands MF, HF, and VHF
R Counter Fully programmable
N Counter Fully programmable
Input Amplifier Integrated at the fIN pin
Crystal Support On-chip external crystal support
Reference Output Programmable
Phase Detector Single-ended and double-ended
Phase Detector Transfer Function Linear with no dead zone
Configuration Register Configurable C register
Power-On Reset Robust, more responsive power-on reset
Family Compatibility Pin-for-pin compatible with MC145170-1
Recommended Usage Recommended by NXP for new designs

MC145170D2 16-pin soic, 3.90 mm width 腳位配置指南

MC145170D2(16-pin soic, 3.90 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MC145170D2 的 16-pin soic, 3.90 mm width 封裝腳位圖

無詳細腳位定義資料: MC145170D2.

請參閱 資料表 以查看完整腳位配置。

典型應用

MC145170D2 適用於 6 應用s: VHF Local Oscillator Generation, FM and Phase-Modulation Systems, Frequency-Agnile Communications Equipment, Low-Power RF Instrument Front Ends, Industrial Frequency Reference Distribution, Test and Measurement Signal Sources.

🌐

VHF Local Oscillator Generation

The MC145170D2 fits VHF local-oscillator generation because it operates up to 185 MHz and supports programmable R and N counters for establishing the relationship between a stable reference and the synthesized output. It can also use an external crystal and provides a programmable reference output for related receiver or transmitter blocks. The integrated phase detectors offer linear single-ended and double-ended transfer functions without a dead zone, which is useful when phase alignment and clean lock behavior are important. As a single-chip PLL synthesizer, it reduces the number of separate divider, phase-detector, and oscillator-support functions required around the RF signal path.

📻

FM and Phase-Modulation Systems

The MC145170D2 is suitable for FM and phase-modulation systems because its programmable counters and selectable phase-detector functions support flexible frequency synthesis and phase control. The double-ended phase detector has a linear transfer function with no dead zone, allowing more linear control behavior than a detector that loses sensitivity near zero phase error. Designers can use the on-chip input amplifier with an external crystal or another suitable reference source, then develop the loop filter around the selected divider configuration. This arrangement supports compact transmitters, receivers, and modulation-support blocks in MF, HF, and VHF equipment.

📡

Frequency-Agnile Communications Equipment

The MC145170D2 supports frequency-agile communications equipment by combining programmable R and N counters with integrated phase detection in one package. Its 185 MHz maximum operating frequency is appropriate for equipment operating in the MF, HF, or VHF bands, while the programmable reference output can provide a system reference to other blocks. The device is particularly useful where channel selection must be changed digitally while a stable reference maintains frequency accuracy. A well-designed loop filter and low-noise reference remain central to achieving rapid lock, low phase noise, and acceptable spurious performance.

🖥️

Low-Power RF Instrument Front Ends

The MC145170D2 can serve as the frequency synthesizer in RF instruments where a stable, programmable local reference is required. Its maximum quiescent supply current of 100 μA is attractive for portable or low-duty-cycle equipment, while the integrated crystal support simplifies implementation of a stable reference oscillator. The 16-pin SOIC package is compatible with conventional surface-mount assembly and leaves the surrounding RF signal path free for separate amplification and filtering. Designers should verify phase-noise, lock-time, spur, and reference-isolation requirements at the intended operating frequency.

🏭

Industrial Frequency Reference Distribution

The MC145170D2 can generate a synchronized reference for industrial instrumentation that requires multiple internally related frequencies. Programmable counters allow the output to be derived from a common reference, while the programmable reference output provides a route for distributing another derived signal to adjacent blocks. The integrated fIN amplifier and crystal support reduce the component count associated with reference generation. The more responsive power-on-reset circuit is valuable in equipment where brief supply disturbances can interrupt a measurement or control sequence, although system-level reset coordination should still be verified.

📊

Test and Measurement Signal Sources

The MC145170D2 is appropriate for test and measurement signal sources that require an accurate, programmable reference with phase-control capability. Its programmable R and N counters support multiple synthesized frequencies from one reference, and the selectable single-ended or double-ended phase detectors provide options for loop architecture. A double-ended detector with a linear, no-dead-zone transfer function can support precise phase-error correction in demanding synchronization systems. For laboratory use, evaluate reference purity, loop bandwidth, settling time, and phase noise rather than relying only on the 185 MHz headline frequency.

推薦產品摘要

MC145170D1 Pin-compatible family reference for legacy PLL designs 用於: VHF Local Oscillator Generation, FM and Phase-Modulation Systems, Frequency-Agnile Communications Equipment, Low-Power RF Instrument Front Ends, Industrial Frequency Reference Distribution, Test and Measurement Signal Sources MC145170D2R2 Related MC145170-2 ordering variant for design comparison 用於: VHF Local Oscillator Generation, FM and Phase-Modulation Systems, Frequency-Agnile Communications Equipment, Low-Power RF Instrument Front Ends, Industrial Frequency Reference Distribution, Test and Measurement Signal Sources
What is the operating frequency of the MC145170D2?
The MC145170D2 supports operation up to 185 MHz. NXP describes it as a single-chip PLL synthesizer intended for MF, HF, and VHF bands. The maximum operating frequency is an important selection limit because divider ratios, reference frequency, loop-filter design, and required output frequency must all remain compatible with the synthesizer architecture. The manufacturer datasheet should be used when calculating the final counter settings and loop dynamics.
Where can I download the MC145170D2 datasheet PDF?
The official MC145170D2 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC145170-2.pdf. It contains the device introduction, functional description, electrical characteristics, application information, ordering information, and pin descriptions. Use this manufacturer document for the complete operating limits and configuration details rather than relying on abbreviated distributor summaries.
Where can I find the MC145170D2 pinout?
The MC145170D2 pinout is presented in the pin-description material of the official NXP MC145170-2 datasheet. The D suffix identifies a 16-pin SOIC package with a 3.90 mm body width. Assign PCB nets directly from the manufacturer pin-description table and package drawing, particularly for fIN, crystal, reference-output, phase-detector, counter, and power pins.
What is the best drop-in replacement for the MC145170D2?
The MC145170D1 is the documented pin-for-pin family alternative to the MC145170D2 and is the closest supported drop-in choice found. NXP states that the two devices use the same chip with different power-on-reset mask options. The MC145170D2 is preferred for new designs because its power-on reset responds more quickly to momentary supply interruptions. No distinct cross-brand drop-in replacement was confirmed for the SOIC-16 footprint.
Can the MC145170D1 replace the MC145170D2 without PCB changes?
Yes, the MC145170D1 is documented as pin-for-pin compatible with the MC145170-2, so it can occupy the same 16-pin SOIC footprint. The principal functional difference is the power-on-reset implementation: MC145170-2 has a more responsive reset circuit, while both devices use the same chip with different mask options. Existing MC145170-1 designs may therefore migrate to MC145170-2 without a layout change.
MC145170D2 vs MC145170D1: which is better for a new design?
The MC145170D2 is better for a new design because NXP recommends it and provides a more responsive power-on-reset circuit for momentary supply interruptions. Both parts are pin-for-pin compatible and use the same underlying chip with different reset mask options. The MC145170D1 remains relevant as a legacy drop-in alternative, but the MC145170-2 offers the preferred reset behavior without requiring a PCB footprint change.
When should I choose the MC145170D2 instead of MC145170D1?
Choose the MC145170D2 when supply interruptions or power-up sequencing reliability are important concerns in the final system. NXP identifies the MC145170-2 as the recommended part for new designs and describes its power-on reset as more responsive to momentary supply interruptions. Choose MC145170D1 mainly when maintaining an existing qualified design requires exact continuity with the earlier mask option.
Is the MC145170D2 suitable for VHF radio frequency designs?
Yes, the MC145170D2 is suitable for VHF designs because it operates up to 185 MHz and is specifically described for MF, HF, and VHF bands. It supports programmable R and N counters, crystal reference operation, a programmable reference output, and linear phase detectors. Actual suitability depends on the required channel spacing, phase noise, reference accuracy, loop bandwidth, and output-power architecture of the complete RF design.
Where can I buy MC145170D2 online and what is its current stock status?
Use the Request a Quote form on this page to request MC145170D2 availability, current lead time, and a quotation for the exact 16-pin SOIC ordering option. Stock status can change rapidly for older catalog components, so confirm the quantity, date code, and packaging requirements before releasing a purchase order. The manufacturer’s product page and datasheet are the appropriate references for technical qualification.
What is the price of MC145170D2?
Submit the MC145170D2 request through the Request a Quote form on this page for the current commercial quotation. Current pricing can vary with order quantity, inventory, and requested delivery terms, so a fixed online price figure would not represent the live market reliably. Include your target quantity, date-code preference, and packaging requirements when requesting the quotation.
What is the lead time for MC145170D2?
Request the current MC145170D2 lead time through the Request a Quote form on this page. Lead time depends on manufacturer inventory, order quantity, and whether a date-code restriction applies. For production planning, request the quantity needed per assembly and the required ship date so that scheduling can be evaluated against the confirmed delivery commitment.
Is MC145170D2 in stock?
Current MC145170D2 inventory should be confirmed through the Request a Quote form on this page because availability can change with procurement volume and manufacturing cycles. Provide the required order quantity, package option, and target date when requesting status. If continuity of supply is critical, ask for lot-traceability information and any available scheduled-production information in the quotation response.
What can replace the MC145170D2?
The MC145170D1 is the confirmed same-family drop-in replacement for the MC145170D2 because the manufacturer states that MC145170-2 is pin-for-pin compatible with MC145170-1. No separate cross-brand equivalent was confirmed for the exact 16-pin SOIC footprint and PLL function. The functional differences should be reviewed carefully, particularly the more responsive power-on reset in MC145170-2.
Is the MC145170D2 the same as the MC145170D1?
The MC145170D2 and MC145170D1 are pin-for-pin compatible and use the same underlying chip with different power-on-reset mask options. They are not functionally identical in reset response: MC145170-2 has a more robust, faster-responding reset circuit, while MC145170-1 uses the earlier implementation. NXP recommends MC145170-2 for new designs.
What are the key specifications of MC145170D2 that engineers should know?
The MC145170D2 is a 185 MHz maximum-frequency PLL frequency synthesizer in a 16-pin SOIC package. Its major features include programmable R and N counters, an integrated fIN amplifier, external-crystal support, a programmable reference output, and single- and double-ended phase detectors with linear transfer functions. Maximum quiescent supply current is 100 μA, and the device is pin-for-pin compatible with MC145170-1.

工程參考資料,適用於 MC145170D2 — 比較、設計指引及合規資訊。

選型指南

Choose the MC145170D2 for new PLL-based RF, communication, instrumentation, or test designs that benefit from the more responsive power-on reset. Its 185 MHz maximum frequency supports MF, HF, and VHF work, while programmable R and N counters, crystal support, programmable reference output, and linear phase detectors provide a versatile synthesizer foundation. Choose MC145170D1 only when maintaining an existing qualified design, obtaining legacy inventory, or preserving continuity with an earlier reset implementation is more important than the preferred MC145170-2 reset behavior. Because MC145170D1 is pin-for-pin compatible, migration does not require a PCB change, but system-level validation should include momentary supply-interruption recovery. No distinct cross-brand drop-in equivalent was confirmed for the exact 16-pin SOIC footprint, so a competitor should not be treated as a drop-in choice unless its pinout and loop characteristics are independently verified.

與替代品比較

參數 本產品 MC145170D1
Package 16-SOIC 16-SOIC
Brand NXP Semiconductors NXP Semiconductors
Power-On Reset More responsive robust power-on reset Earlier power-on-reset mask option
New-Design Recommendation Recommended by NXP Legacy family option
Pin Compatibility Pin-for-pin compatible with MC145170-1 Pin-for-pin compatible with MC145170-2

主要差異化特點

  • More responsive power-on-reset behavior (對比MC145170D1)
  • Preferred device for new PLL designs (對比MC145170D1)
  • No PCB change for family migration (對比MC145170D1)

設計說明

Assign every connection from the official NXP MC145170-2 pin-description table and package drawing. The D suffix is a 16-pin SOIC option, so PCB tracks and land patterns must follow that package rather than the 20-pin or TSSOP ordering options described for other members of the family. Keep the crystal or reference-network connections and the phase-detector loop-filter components away from noisy switching nodes.

Place the input and output bypass capacitors close to their corresponding power pins and follow the manufacturer’s recommended values and layout. The stated 100 μA maximum applies to quiescent supply current and does not include dynamic current from the counters or output circuitry. Estimate worst-case supply demand across the intended operating frequency and load state rather than designing the supply around the quiescent value alone.

Do not assume that the MC145170-1 and MC145170-2 have identical power-on-reset behavior. NXP states that both use the same chip with different reset mask options and recommends MC145170-2 for new designs because its reset responds more rapidly to momentary supply interruptions. Verify startup, interruption recovery, and counter initialization in the complete system, particularly where reference lock timing affects downstream RF behavior.

Design the phase-detector loop filter for the actual reference frequency, programmable R and N counter arrangement, required channel spacing, and lock-time target. The linear, no-dead-zone double-ended detector can improve control linearity, but loop bandwidth also affects phase noise, reference spurs, and susceptibility to unwanted feedback. Use the manufacturer’s application guidance as the starting point and validate lock and spectral performance on the final PCB.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified in the available manufacturer or distributor information. AEC-Q100 is not applicable to this device category.

相關搜尋

MC145170D2 datasheet MC145170D2 pinout MC145170D2 datasheet pdf MC145170D2 equivalent MC145170D2 replacement MC145170D2 cross reference MC145170D2 vs MC145170D1 MC145170D2 footprint MC145170D2 price MC145170D2 stock NXP MC145170D2 MC145170D2 185MHz PLL MC145170D2 SOIC-16 application MC145170D2 schematic

相關元件與詞彙

NXP Semiconductors MC145170D2 MC145170-2 MC145170D1 MC145170-1 PLL phase-locked loop frequency synthesizer clock and timing integrated circuit semiconductor programmable R counter programmable N counter phase detector double-ended phase detector single-ended phase detector input amplifier external crystal oscillator programmable reference output power-on reset MF band HF band VHF band 16-SOIC SOIC package surface mount
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情