MC145170D2 - 185MHz PLL Frequency Synthesizer | NXP
料号: MC145170D2 ✓ 量产中MC145170D2 概述
A phase-locked loop, or PLL, is a feedback-controlled timing circuit that locks an output frequency to a reference frequency. The PLL frequency synthesizer category sits within clock and timing integrated circuits, where it supports clock generation, frequency multiplication, modulation, and phase alignment. The MC145170 family was designed for direct use in MF, HF, and VHF bands, combining digital counters and analog phase-detection functions on one integrated circuit.
Programmable R and N counters allow the relationship between the reference input and synthesized output to be established by register programming. The device supports an external crystal at the input amplifier, while the programmable reference output provides a convenient reference for other system blocks. Its maximum specified quiescent supply current remains 100 μA, making it practical for low-power frequency-control equipment when the operating conditions permit low current consumption.
The MC145170-2 uses a more responsive power-on reset circuit than MC145170-1. According to NXP, both devices use the same chip with different power-on-reset mask options, and the MC145170-2 is recommended for new designs. This reset behavior is especially useful when a brief supply interruption could otherwise leave internal counters or the phase comparator in an incorrect state. The MC145170-2 is also identified as pin-for-pin compatible with MC145170-1.
Typical uses include local-oscillator generation in radio receivers and transmitters, FM and phase-modulation systems, frequency-agile communications equipment, industrial instrumentation, and low-power RF test equipment. The 185 MHz operating limit provides useful range for VHF designs, while the 16-pin SOIC package supports conventional surface-mount assembly. System designers should account for the required loop filter, reference source, divider programming, and decoupling network shown in the manufacturer’s application guidance.
For a new design, confirm that the selected reference frequency, counter ratio, loop bandwidth, and required reference output can be supported by the internal divider arrangement. Place the input and reference-network components close to their associated pins, use a clean and stable reference source, and verify startup and reacquisition behavior across supply interruptions. The D suffix denotes the 16-pin SOIC ordering option identified by the product listing.
This page combines the manufacturer’s device capabilities, package information, family compatibility details, application guidance, and drop-in replacement analysis. It also organizes the most important selection constraints into a practical guide for evaluating the MC145170D2 in PLL-based RF and timing designs.
直接替换替代料: MC145170D2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MC145170D1
✅ 直接替换📋 参考替代料(不在目录中)
MC145170D2 规格参数
| Device Type | PLL frequency synthesizer with serial interface |
| Maximum Operating Frequency | 185 MHz |
| 电源电流 | 100 μA maximum quiescent |
| 封装 | 16-pin SOIC, 3.90 mm width |
| Operating Frequency Bands | MF, HF, and VHF |
| R Counter | Fully programmable |
| N Counter | Fully programmable |
| Input Amplifier | Integrated at the fIN pin |
| Crystal Support | On-chip external crystal support |
| Reference Output | Programmable |
| Phase Detector | Single-ended and double-ended |
| Phase Detector Transfer Function | Linear with no dead zone |
| Configuration Register | Configurable C register |
| Power-On Reset | Robust, more responsive power-on reset |
| Family Compatibility | Pin-for-pin compatible with MC145170-1 |
| Recommended Usage | Recommended by NXP for new designs |
MC145170D2 16-pin soic, 3.90 mm width 引脚配置指南
MC145170D2(16-pin soic, 3.90 mm width 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MC145170D2.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC145170D2 适用于 6 应用s: VHF Local Oscillator Generation, FM and Phase-Modulation Systems, Frequency-Agnile Communications Equipment, Low-Power RF Instrument Front Ends, Industrial Frequency Reference Distribution, Test and Measurement Signal Sources.
VHF Local Oscillator Generation
The MC145170D2 fits VHF local-oscillator generation because it operates up to 185 MHz and supports programmable R and N counters for establishing the relationship between a stable reference and the synthesized output. It can also use an external crystal and provides a programmable reference output for related receiver or transmitter blocks. The integrated phase detectors offer linear single-ended and double-ended transfer functions without a dead zone, which is useful when phase alignment and clean lock behavior are important. As a single-chip PLL synthesizer, it reduces the number of separate divider, phase-detector, and oscillator-support functions required around the RF signal path.
推荐
FM and Phase-Modulation Systems
The MC145170D2 is suitable for FM and phase-modulation systems because its programmable counters and selectable phase-detector functions support flexible frequency synthesis and phase control. The double-ended phase detector has a linear transfer function with no dead zone, allowing more linear control behavior than a detector that loses sensitivity near zero phase error. Designers can use the on-chip input amplifier with an external crystal or another suitable reference source, then develop the loop filter around the selected divider configuration. This arrangement supports compact transmitters, receivers, and modulation-support blocks in MF, HF, and VHF equipment.
推荐
Frequency-Agnile Communications Equipment
The MC145170D2 supports frequency-agile communications equipment by combining programmable R and N counters with integrated phase detection in one package. Its 185 MHz maximum operating frequency is appropriate for equipment operating in the MF, HF, or VHF bands, while the programmable reference output can provide a system reference to other blocks. The device is particularly useful where channel selection must be changed digitally while a stable reference maintains frequency accuracy. A well-designed loop filter and low-noise reference remain central to achieving rapid lock, low phase noise, and acceptable spurious performance.
推荐
Low-Power RF Instrument Front Ends
The MC145170D2 can serve as the frequency synthesizer in RF instruments where a stable, programmable local reference is required. Its maximum quiescent supply current of 100 μA is attractive for portable or low-duty-cycle equipment, while the integrated crystal support simplifies implementation of a stable reference oscillator. The 16-pin SOIC package is compatible with conventional surface-mount assembly and leaves the surrounding RF signal path free for separate amplification and filtering. Designers should verify phase-noise, lock-time, spur, and reference-isolation requirements at the intended operating frequency.
推荐
Industrial Frequency Reference Distribution
The MC145170D2 can generate a synchronized reference for industrial instrumentation that requires multiple internally related frequencies. Programmable counters allow the output to be derived from a common reference, while the programmable reference output provides a route for distributing another derived signal to adjacent blocks. The integrated fIN amplifier and crystal support reduce the component count associated with reference generation. The more responsive power-on-reset circuit is valuable in equipment where brief supply disturbances can interrupt a measurement or control sequence, although system-level reset coordination should still be verified.
推荐
Test and Measurement Signal Sources
The MC145170D2 is appropriate for test and measurement signal sources that require an accurate, programmable reference with phase-control capability. Its programmable R and N counters support multiple synthesized frequencies from one reference, and the selectable single-ended or double-ended phase detectors provide options for loop architecture. A double-ended detector with a linear, no-dead-zone transfer function can support precise phase-error correction in demanding synchronization systems. For laboratory use, evaluate reference purity, loop bandwidth, settling time, and phase noise rather than relying only on the 185 MHz headline frequency.
推荐
推荐产品汇总
工程参考数据: MC145170D2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC145170D1 |
|---|---|---|
| Package | 16-SOIC | 16-SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Power-On Reset | More responsive robust power-on reset | Earlier power-on-reset mask option |
| New-Design Recommendation | Recommended by NXP | Legacy family option |
| Pin Compatibility | Pin-for-pin compatible with MC145170-1 | Pin-for-pin compatible with MC145170-2 |
关键差异点
- More responsive power-on-reset behavior (对比 MC145170D1)
- Preferred device for new PLL designs (对比 MC145170D1)
- No PCB change for family migration (对比 MC145170D1)
设计说明
Assign every connection from the official NXP MC145170-2 pin-description table and package drawing. The D suffix is a 16-pin SOIC option, so PCB tracks and land patterns must follow that package rather than the 20-pin or TSSOP ordering options described for other members of the family. Keep the crystal or reference-network connections and the phase-detector loop-filter components away from noisy switching nodes.
Place the input and output bypass capacitors close to their corresponding power pins and follow the manufacturer’s recommended values and layout. The stated 100 μA maximum applies to quiescent supply current and does not include dynamic current from the counters or output circuitry. Estimate worst-case supply demand across the intended operating frequency and load state rather than designing the supply around the quiescent value alone.
Do not assume that the MC145170-1 and MC145170-2 have identical power-on-reset behavior. NXP states that both use the same chip with different reset mask options and recommends MC145170-2 for new designs because its reset responds more rapidly to momentary supply interruptions. Verify startup, interruption recovery, and counter initialization in the complete system, particularly where reference lock timing affects downstream RF behavior.
Design the phase-detector loop filter for the actual reference frequency, programmable R and N counter arrangement, required channel spacing, and lock-time target. The linear, no-dead-zone double-ended detector can improve control linearity, but loop bandwidth also affects phase noise, reference spurs, and susceptibility to unwanted feedback. Use the manufacturer’s application guidance as the starting point and validate lock and spectral performance on the final PCB.
合规信息
RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified in the available manufacturer or distributor information. AEC-Q100 is not applicable to this device category.