MC33071PG - 4.5 MHz, 13 V/us Single-Supply Op Amp | onsemi
MPN: MC33071PG ✓ 啟用中MC33071PG 概覽
An operational amplifier is a voltage-feedback analog IC that uses differential input voltage to produce an amplified output voltage. The MC33071 belongs to the broader single-amplifier, general-purpose amplifier hierarchy, where it combines high bandwidth and rapid slew rate with the ability to operate from a positive supply without a negative rail. This makes it useful for industrial signal conditioning, control, and instrumentation circuits.
The main performance characteristics are a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and 1.9 mA supply current. Its high slew rate allows the output to track large-amplitude input changes quickly, while the 4.5 MHz bandwidth supports higher-frequency closed-loop operation than ordinary low-frequency general-purpose amplifiers. The single-supply range permits direct use in 3.0 V to 44 V systems.
The MC33071 uses quality bipolar fabrication and a bipolar monolithic operational-amplifier architecture rather than JFET input technology. According to the onsemi product page, the family provides fast settling performance and broad supply-voltage operation. Its single-ended output and single-amplifier configuration simplify designs that require one independent signal-conditioning channel per package.
Typical applications include industrial process-control loops, sensor-signal conditioning, low-level instrumentation, motor-feedback amplifiers, and general analog signal processing. The wide supply range is particularly useful in industrial equipment where intermediate rails may be present. In battery-powered systems, the 3.0 V lower limit supports low-voltage operation, although supply current should be included in the overall power budget.
For stable operation, follow the manufacturer datasheet when selecting external bias resistors, feedback components, and supply-decoupling capacitors. The input common-mode range and output swing depend on the supply voltage, so verify the operating-point requirements of the target circuit. A low-noise bypass capacitor placed close to the supply pins can reduce ripple coupled into the amplifier output.
This product page combines the MC33071PG operating limits, package details, verified drop-in candidates, and application-specific design guidance to help engineers evaluate the amplifier before completing a PCB design.
直接替換替代品,適用於 MC33071PG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC33071PG (相同外形與佔位) — 差異在於 Package, Mounting Type, Input Offset Voltage, Technology.
MC33071P
✅ 直接替換聯絡詢價
查看資料表 →MC34071P
✅ 直接替換聯絡詢價
查看資料表 →OP90GPZ
✅ 直接替換📋 參考替代品(不在目錄中)
MC33071PG 最大額定值與電氣特性
| Amplifier Type | General Purpose |
| Number of Circuits | 1 circuit |
| 輸出類型 | Single-ended |
| Supply Voltage Range | 3.0 V to 44 V |
| Gain-Bandwidth Product | 4.5 MHz |
| Slew Rate | 13 V/us |
| 供應電流 | 1.9 mA |
| 封裝 | 8-DIP, 0.300 inch (7.62 mm) pitch |
| 安裝類型 | Through-hole |
| Temperature Grade | Industrial |
| Packaging | Tube |
| 腳位數 | 8 pins |
| Technology | Quality bipolar fabrication |
MC33071PG 8-dip, 0.300 inch (7.62 mm) pitch 腳位配置指南
MC33071PG(8-dip, 0.300 inch (7.62 mm) pitch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MC33071PG.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC33071PG 適用於 6 應用s: Industrial Process-Control Loops, Low-Level Sensor Signal Conditioning, Motor and Solenoid Feedback Conditioning, Precision Test and Measurement Front Ends, Audio and Communication Interface Buffers, Portable and Low-Voltage Analog Systems.
Industrial Process-Control Loops
The MC33071PG fits process-control loops where the controller requires a fast amplifier to condition sensor references or drive a feedback network. Its 4.5 MHz gain-bandwidth product provides useful closed-loop bandwidth, while the 13 V/us slew rate reduces the time required to track changing control signals. The 3.0 V to 44 V single-supply range supports both compact electronic systems and industrial rails, although the input common-mode range and output swing must be checked at the chosen supply. For stable operation, use short feedback traces and place supply bypass capacitance close to the device.
推薦
Low-Level Sensor Signal Conditioning
The MC33071PG can amplify low-level sensor outputs when the required signal bandwidth exceeds the capability of a basic precision op amp while full rail-to-rail operation is unnecessary. A 13 V/us slew rate helps preserve large transient content, and the 4.5 MHz gain-bandwidth product allows useful bandwidth at moderate closed-loop gains. The 1.9 mA supply current remains manageable in many distributed sensor systems. Bias the input into the valid common-mode range and verify the output swing, because the amplifier does not automatically support every zero-volt input signal.
推薦
Motor and Solenoid Feedback Conditioning
The MC33071PG is appropriate for amplifying position, current, or voltage feedback in industrial motor-control systems where rapid signal tracking is important. Its 13 V/us slew rate can reproduce faster feedback transitions than a low-bandwidth general-purpose amplifier, while the 4.5 MHz gain-bandwidth product supports the amplifier's dynamic operating range. The wide 3.0 V to 44 V supply capability is useful around higher-voltage industrial systems. Keep the amplifier away from high-current switching paths and route its reference and feedback nets separately from power-node currents.
推薦
Precision Test and Measurement Front Ends
The MC33071PG can serve as an intermediate gain stage in test and measurement front ends that require both modest precision and response above the bandwidth of conventional general-purpose amplifiers. Its 4.5 MHz gain-bandwidth product and 13 V/us slew rate allow the stage to process faster transients without adding a high-power JFET amplifier to the design. A 1.9 mA supply current helps control system heat, and the 3.0 V lower operating limit suits compact acquisition systems. Validate offset and bias behavior against the measurement accuracy required by the instrument.
推薦
Audio and Communication Interface Buffers
The MC33071PG can buffer moderate-bandwidth audio or communications interface signals when the design needs more slew capability than a slow general-purpose amplifier. The 13 V/us slew rate reduces distortion on rapidly changing waveforms, and the 4.5 MHz gain-bandwidth product supports useful bandwidth in small-signal buffer configurations. Its 1.9 mA supply current is economical for distributed interface circuitry, while the 3.0 V to 44 V range covers multiple system rails. Avoid using it where rail-to-rail input operation, ultra-low noise, or wide output swing is essential.
推薦
Portable and Low-Voltage Analog Systems
The MC33071PG can be used in portable equipment at supply voltages near the 3.0 V lower operating limit, provided the signal remains inside the amplifier's common-mode and output-swing limits. Its 1.9 mA supply current is relatively modest, and the 13 V/us slew rate provides more dynamic response than a slow general-purpose op amp. This combination is useful for battery-powered sensor interfaces, compact audio paths, and portable measurement equipment. Use low-leakage input biasing and verify the exact offset and bias-current limits before designing high-impedance sensor connections.
推薦
推薦產品摘要
工程參考資料,適用於 MC33071PG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC33071P | MC34071P | OP90GPZ |
|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | Analog Devices |
| Package | 8-DIP (0.300 inch, 7.62 mm pitch) | 8-DIP (0.300 inch, 7.62 mm pitch) | 8-DIP (0.300 inch, 7.62 mm pitch) | 8-DIP (0.300 inch, 7.62 mm pitch) |
| Amplifier Type | General Purpose | General Purpose | General Purpose | General Purpose |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Output Type | Single-ended | Single-ended | Single-ended | Single-ended |
主要差異化特點
- High slew rate within a single-supply general-purpose amplifier (對比OP90GPZ)
- Wide single-supply operating range (對比MC33071P)
- Same-family alternatives simplify design review (對比MC34071P)
設計說明
Use a single positive supply within the MC33071PG's 3.0 V to 44 V operating range and verify that the desired input and output voltages remain inside the datasheet's common-mode and swing limits. Place the recommended bypass capacitor close to the supply pins and connect it to a low-impedance ground return. Do not assume that the amplifier can accept a zero-volt input or reach the positive rail at every supply voltage.
Keep the inverting-input, feedback-resistor, and output traces short to minimize parasitic feedback and instability. Route the non-inverting input away from supply-current and switching-node paths. Because the MC33071PG can deliver a 13 V/us slew rate, high-frequency feedback loops require careful grounding; use a compact analog ground region and provide a low-impedance return for bypass current.
Confirm the exact pin assignment and package suffix before soldering because MC33071 family variants use different ordering codes and package options. Also check bias current, offset voltage, output swing, and input range at the intended supply rather than relying only on the 4.5 MHz gain-bandwidth product. A replacement that matches the DIP footprint is not automatically equivalent if its voltage rating or signal-handling limits differ.
合規資訊
The MC33071PG is an industrial-grade general-purpose operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited manufacturer and distributor pages.