onsemi

MC33071PG - 4.5 MHz, 13 V/us Single-Supply Op Amp | onsemi

부품 번호: MC33071PG ✓ 활성
3.0 V to 44 V Vdss 1.9 mA Id 8-DIP, 0.300 inch (7.62 mm) pitch Package
MOQ: 1 |

MC33071PG 개요

The onsemi MC33071PG is a general-purpose, single-circuit operational amplifier with a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and single-supply operation from 3.0 V to 44 V. The device is packaged in an 8-pin through-hole DIP measuring 0.300 inch, or 7.62 mm, in pitch.

An operational amplifier is a voltage-feedback analog IC that uses differential input voltage to produce an amplified output voltage. The MC33071 belongs to the broader single-amplifier, general-purpose amplifier hierarchy, where it combines high bandwidth and rapid slew rate with the ability to operate from a positive supply without a negative rail. This makes it useful for industrial signal conditioning, control, and instrumentation circuits.

The main performance characteristics are a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and 1.9 mA supply current. Its high slew rate allows the output to track large-amplitude input changes quickly, while the 4.5 MHz bandwidth supports higher-frequency closed-loop operation than ordinary low-frequency general-purpose amplifiers. The single-supply range permits direct use in 3.0 V to 44 V systems.

The MC33071 uses quality bipolar fabrication and a bipolar monolithic operational-amplifier architecture rather than JFET input technology. According to the onsemi product page, the family provides fast settling performance and broad supply-voltage operation. Its single-ended output and single-amplifier configuration simplify designs that require one independent signal-conditioning channel per package.

Typical applications include industrial process-control loops, sensor-signal conditioning, low-level instrumentation, motor-feedback amplifiers, and general analog signal processing. The wide supply range is particularly useful in industrial equipment where intermediate rails may be present. In battery-powered systems, the 3.0 V lower limit supports low-voltage operation, although supply current should be included in the overall power budget.

For stable operation, follow the manufacturer datasheet when selecting external bias resistors, feedback components, and supply-decoupling capacitors. The input common-mode range and output swing depend on the supply voltage, so verify the operating-point requirements of the target circuit. A low-noise bypass capacitor placed close to the supply pins can reduce ripple coupled into the amplifier output.

This product page combines the MC33071PG operating limits, package details, verified drop-in candidates, and application-specific design guidance to help engineers evaluate the amplifier before completing a PCB design.

드롭인 대체품: MC33071PG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MC33071PG (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Input Offset Voltage, Technology.

onsemi
Package: 8-pin PDIP
Input Offset Voltage: 5 mV maximum
비교 대상: MC33071PG →
onsemi
Package: 8-DIP (0.300 inch, 7.62 mm pitch)
Mounting Type: Through hole
Input Offset Voltage: 5 mV
비교 대상: MC33071PG →

MC33071P

✅ 드롭인
onsemi
📦 8-DIP (0.300 inch, 7.62 mm pitch)
Single operational amplifier · General-purpose operational amplifier · 1 circuit · 3.0 V to 44 V · 5 mV maximum · 4.5 MHz · 1.9 mA · 7000 uV

가격 문의

데이터시트 보기 →

MC34071P

✅ 드롭인
onsemi
📦 8-DIP (0.300 inch, 7.62 mm pitch)
Single operational amplifier · 1 circuit · 3.0 V to 44 V · 5.0 V · 3.0 V at 25°C · 5 mV · Bipolar fabrication · 8-DIP (0.300 inch, 7.62 mm pitch)

가격 문의

데이터시트 보기 →

OP90GPZ

✅ 드롭인
📦 8-DIP (0.300 inch, 7.62 mm pitch)
Same 8-pin through-hole general-purpose amplifier category, but it targets lower-frequency precision applications; the identified MC33071PG gain-bandwidth product is 4.5 MHz, while the OP90GPZ bandwidth is lower by more than 30%.

📋 참조 대체품 (카탈로그에 없음)

MC33071PG 최대 정격 & 전기적 특성

Amplifier Type General Purpose
Number of Circuits 1 circuit
출력 유형 Single-ended
Supply Voltage Range 3.0 V to 44 V
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/us
공급 전류 1.9 mA
패키지 8-DIP, 0.300 inch (7.62 mm) pitch
실장 유형 Through-hole
Temperature Grade Industrial
Packaging Tube
핀 수 8 pins
Technology Quality bipolar fabrication

MC33071PG 8-dip, 0.300 inch (7.62 mm) pitch 핀 구성 가이드

MC33071PG(8-dip, 0.300 inch (7.62 mm) pitch 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MC33071PG의 8-dip, 0.300 inch (7.62 mm) pitch 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC33071PG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC33071PG 적합 용도: 6 애플리케이션s: Industrial Process-Control Loops, Low-Level Sensor Signal Conditioning, Motor and Solenoid Feedback Conditioning, Precision Test and Measurement Front Ends, Audio and Communication Interface Buffers, Portable and Low-Voltage Analog Systems.

🏭

Industrial Process-Control Loops

The MC33071PG fits process-control loops where the controller requires a fast amplifier to condition sensor references or drive a feedback network. Its 4.5 MHz gain-bandwidth product provides useful closed-loop bandwidth, while the 13 V/us slew rate reduces the time required to track changing control signals. The 3.0 V to 44 V single-supply range supports both compact electronic systems and industrial rails, although the input common-mode range and output swing must be checked at the chosen supply. For stable operation, use short feedback traces and place supply bypass capacitance close to the device.

🧩

Low-Level Sensor Signal Conditioning

The MC33071PG can amplify low-level sensor outputs when the required signal bandwidth exceeds the capability of a basic precision op amp while full rail-to-rail operation is unnecessary. A 13 V/us slew rate helps preserve large transient content, and the 4.5 MHz gain-bandwidth product allows useful bandwidth at moderate closed-loop gains. The 1.9 mA supply current remains manageable in many distributed sensor systems. Bias the input into the valid common-mode range and verify the output swing, because the amplifier does not automatically support every zero-volt input signal.

⚡

Motor and Solenoid Feedback Conditioning

The MC33071PG is appropriate for amplifying position, current, or voltage feedback in industrial motor-control systems where rapid signal tracking is important. Its 13 V/us slew rate can reproduce faster feedback transitions than a low-bandwidth general-purpose amplifier, while the 4.5 MHz gain-bandwidth product supports the amplifier's dynamic operating range. The wide 3.0 V to 44 V supply capability is useful around higher-voltage industrial systems. Keep the amplifier away from high-current switching paths and route its reference and feedback nets separately from power-node currents.

🖥️

Precision Test and Measurement Front Ends

The MC33071PG can serve as an intermediate gain stage in test and measurement front ends that require both modest precision and response above the bandwidth of conventional general-purpose amplifiers. Its 4.5 MHz gain-bandwidth product and 13 V/us slew rate allow the stage to process faster transients without adding a high-power JFET amplifier to the design. A 1.9 mA supply current helps control system heat, and the 3.0 V lower operating limit suits compact acquisition systems. Validate offset and bias behavior against the measurement accuracy required by the instrument.

🌐

Audio and Communication Interface Buffers

The MC33071PG can buffer moderate-bandwidth audio or communications interface signals when the design needs more slew capability than a slow general-purpose amplifier. The 13 V/us slew rate reduces distortion on rapidly changing waveforms, and the 4.5 MHz gain-bandwidth product supports useful bandwidth in small-signal buffer configurations. Its 1.9 mA supply current is economical for distributed interface circuitry, while the 3.0 V to 44 V range covers multiple system rails. Avoid using it where rail-to-rail input operation, ultra-low noise, or wide output swing is essential.

📱

Portable and Low-Voltage Analog Systems

The MC33071PG can be used in portable equipment at supply voltages near the 3.0 V lower operating limit, provided the signal remains inside the amplifier's common-mode and output-swing limits. Its 1.9 mA supply current is relatively modest, and the 13 V/us slew rate provides more dynamic response than a slow general-purpose op amp. This combination is useful for battery-powered sensor interfaces, compact audio paths, and portable measurement equipment. Use low-leakage input biasing and verify the exact offset and bias-current limits before designing high-impedance sensor connections.

What is the operating voltage of the MC33071PG?
The MC33071PG operates from a single 3.0 V to 44 V supply. According to the onsemi MC33071 product page, the device can be operated from a positive supply without requiring a negative rail. The operating range makes it suitable for low-voltage analog systems as well as industrial rails well above conventional logic levels, although the exact input and output swing limits must remain inside the amplifier's permitted common-mode range.
What are the key specifications of MC33071PG that engineers should know?
The MC33071PG is a single, general-purpose operational amplifier with 4.5 MHz gain-bandwidth product, 13 V/us slew rate, 1.9 mA supply current, and operation from 3.0 V to 44 V. According to the onsemi product page, the MC33071 family uses quality bipolar fabrication and provides high slew rate and wide bandwidth without JFET input devices. It is offered in an 8-pin DIP package for through-hole assembly.
Where can I download the MC33071PG datasheet PDF?
The MC33071PG datasheet is available through the onsemi MC33071 product page and the linked manufacturer documentation. The manufacturer product page identifies the family as a single-supply, 3.0 V to 44 V operational amplifier with 4.5 MHz gain-bandwidth product and 13 V/us slew rate. Use the pin-description and electrical-characteristics tables in that document when assigning PCB connections and verifying limits at the intended supply voltage.
Where can I find the MC33071PG pinout?
The MC33071PG pinout is documented in the manufacturer datasheet's pin-configuration drawing for the 8-pin DIP package. The MC33071PG is a single operational amplifier in an 8-DIP, 0.300 inch (7.62 mm) pitch package. Use the datasheet pin-description table rather than relying on a generic DIP drawing, because offset-null, supply, input, and output assignments must match the selected amplifier pinout.
What can replace the MC33071PG as a drop-in part?
The MC33071P is the closest same-manufacturer drop-in candidate because it is also listed as a single-circuit, general-purpose amplifier in an 8-pin DIP package. Its functional compatibility is supported by the MC33071 family information, but final substitution still requires checking voltage limits, bias currents, offset limits, and the exact pinout in the manufacturer documentation. The cross-reference search identifies MC33071P but does not establish a complete set of five independently qualified replacements.
Is the MC33071PG the same as the MC33071P?
The MC33071PG and MC33071P are members of the same single-amplifier MC33071 family and are listed in 8-pin DIP packages, making MC33071P the strongest same-family replacement candidate. Their suffix-specific ordering codes and electrical limits should still be checked before substitution. In particular, confirm the exact pin configuration, temperature grade, supply-current limits, and any option-dependent electrical characteristics in the onsemi ordering documentation.
MC33071PG vs MC33071P - which is better for an existing design?
Choose the MC33071PG when its specific temperature grade and ordering qualifications match the finished product; otherwise MC33071P may serve as the closer catalog alternative for an 8-DIP design. Both parts belong to the same single general-purpose amplifier family and are identified as 8-pin DIP devices. The decision should be based on exact suffix ratings rather than appearance alone, since package name, pinout, and electrical limits all need confirmation.
MC33071PG vs OP90GPZ - which is better for a general-purpose amplifier design?
The MC33071PG is better when a 4.5 MHz gain-bandwidth product and 13 V/us slew rate are important. The cross-reference search identifies OP90GPZ as a through-hole general-purpose amplifier alternative, but its electrical limits must be compared with the target circuit before substitution. The MC33071PG also offers a documented 3.0 V to 44 V single-supply range, making it the stronger candidate when the design requires a high upper supply limit.
When should I choose MC33071PG over a lower-bandwidth operational amplifier?
Choose the MC33071PG when the signal path requires faster slew or a wider gain-bandwidth product than a conventional general-purpose amplifier provides. Its 13 V/us slew rate supports rapid output transitions, while 4.5 MHz gain-bandwidth product gives more closed-loop bandwidth at higher noise-gain settings. It is especially appropriate for industrial control signals, instrumentation, and feedback loops where response speed can improve system behavior.
Is MC33071PG suitable for industrial instrumentation?
The MC33071PG is suitable for many industrial instrumentation and control circuits because it provides a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, an industrial temperature grade, and operation from 3.0 V to 44 V. Its 1.9 mA supply current is modest for a bipolar amplifier. The signal amplitude must remain within the device's input common-mode and output swing limits for the selected supply.
What is the lead time for MC33071PG?
The current MC33071PG lead time depends on package availability and the requested quantity. Use the Request a Quote form on this page to request current lead time, minimum order quantity, and production scheduling for the exact 8-pin DIP tube configuration. The MC33071PG is identified in the 8-DIP package with tube packaging, so include those details in the request to avoid ambiguity.
Is MC33071PG in stock and where can I buy it?
Use the Request a Quote form on this page to check current MC33071PG availability, volume pricing, and delivery timing. The component is listed in an 8-pin DIP package with tube packaging and as an industrial-grade part. Quote requests should specify the MC33071PG marking, required quantity, and target delivery schedule so the order can be matched to the correct catalog variant.
How much does MC33071PG cost?
The current MC33071PG price depends on order quantity, package configuration, and market availability. Submit a quantity and required delivery date through the Request a Quote form on this page for an exact quotation. Requesting the tube-packed 8-DIP configuration helps the supplier confirm the correct manufacturer part number and avoids receiving a quotation for a different MC33071 package option.
Does MC33071PG require a negative supply?
No, the MC33071PG can operate from a single positive supply between 3.0 V and 44 V. According to the onsemi product page, the MC33071 family is designed for single-supply operation. Input signals and output signals still must satisfy the amplifier's common-mode and output-swing limits at the chosen supply voltage, so a zero-volt signal near ground may require careful biasing.
How should MC33071PG be decoupled and laid out?
Place the manufacturer-recommended supply-bypass capacitor close to the positive supply pin, with a short and low-inductance return path to the supply ground pin. Keep feedback resistors close to the amplifier pins and avoid routing high-current return paths beneath the analog input traces. If the package is mounted in a through-hole design, follow the datasheet pinout and the manufacturer's decoupling recommendations rather than a generic DIP layout.

엔지니어링 참조 데이터: MC33071PG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC33071PG when the design needs a general-purpose bipolar operational amplifier with a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and operation from a single 3.0 V to 44 V rail. Its combination of speed, supply range, and 1.9 mA supply current suits industrial control, instrumentation, feedback, and moderate-bandwidth signal-conditioning circuits. MC33071P is the closest same-family catalog candidate when an alternate ordering code is acceptable; check its exact suffix ratings and pin assignment. MC34071P is another single-amplifier, same-package family candidate with the same headline bandwidth and slew rate. OP90GPZ is appropriate when lower-frequency precision behavior is more important, but it does not match the MC33071PG's 4.5 MHz bandwidth and 13 V/us slew-rate capability. For any substitution, verify common-mode range, output swing, offset, bias current, temperature grade, and the exact manufacturer pinout.

대체품과의 비교

파라미터 이 제품 MC33071P MC34071P OP90GPZ
Brand onsemi onsemi onsemi Analog Devices
Package 8-DIP (0.300 inch, 7.62 mm pitch) 8-DIP (0.300 inch, 7.62 mm pitch) 8-DIP (0.300 inch, 7.62 mm pitch) 8-DIP (0.300 inch, 7.62 mm pitch)
Amplifier Type General Purpose General Purpose General Purpose General Purpose
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Output Type Single-ended Single-ended Single-ended Single-ended

주요 차별점

  • High slew rate within a single-supply general-purpose amplifier (vs OP90GPZ)
  • Wide single-supply operating range (vs MC33071P)
  • Same-family alternatives simplify design review (vs MC34071P)

설계 노트

Use a single positive supply within the MC33071PG's 3.0 V to 44 V operating range and verify that the desired input and output voltages remain inside the datasheet's common-mode and swing limits. Place the recommended bypass capacitor close to the supply pins and connect it to a low-impedance ground return. Do not assume that the amplifier can accept a zero-volt input or reach the positive rail at every supply voltage.

Keep the inverting-input, feedback-resistor, and output traces short to minimize parasitic feedback and instability. Route the non-inverting input away from supply-current and switching-node paths. Because the MC33071PG can deliver a 13 V/us slew rate, high-frequency feedback loops require careful grounding; use a compact analog ground region and provide a low-impedance return for bypass current.

Confirm the exact pin assignment and package suffix before soldering because MC33071 family variants use different ordering codes and package options. Also check bias current, offset voltage, output swing, and input range at the intended supply rather than relying only on the 4.5 MHz gain-bandwidth product. A replacement that matches the DIP footprint is not automatically equivalent if its voltage rating or signal-handling limits differ.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The MC33071PG is an industrial-grade general-purpose operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited manufacturer and distributor pages.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MC33071PG datasheet MC33071PG specifications MC33071PG pinout MC33071PG datasheet pdf onsemi MC33071PG MC33071PG equivalent MC33071PG replacement MC33071PG vs OP90GPZ MC33071PG 8-DIP amplifier MC33071PG 13 V/us op amp MC33071PG industrial instrumentation MC33071PG price MC33071PG stock MC33071PG cross reference

관련 부품 & 용어

onsemi MC33071PG MC33071P MC34071P OP90GPZ Analog Devices operational amplifier single-supply operational amplifier general-purpose amplifier voltage-feedback amplifier bipolar operational amplifier gain-bandwidth product slew rate supply current 8-DIP package through-hole package single-ended output industrial instrumentation process control sensor signal conditioning power supply rejection ratio RoHS REACH surface mount semiconductor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기