onsemi

MC33072PG - Dual 44V 4.5MHz Op Amp | onsemi

MPN: MC33072PG ✓ 啟用中
3.0 V to 44 V Vdss 8-PDIP, 0.300 inch (7.62 mm) pitch Package
MOQ: 1 |

MC33072PG 概覽

The onsemi MC33072PG is a dual general-purpose operational amplifier with a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate, supplied in an 8-pin PDIP package. The device provides two amplifiers in one package and supports both split-supply and single-supply operation, making it suitable for industrial analog signal chains.

An operational amplifier is an analog building block that provides high open-loop gain and uses negative feedback to amplify or process signals. The MC33072 belongs to the hierarchy of operational amplifier, voltage-feedback amplifier, analog signal-processing IC, and semiconductor. Its bipolar construction avoids JFET input devices while providing a practical combination of bandwidth, slew rate, input characteristics, and supply flexibility.

The two amplifier sections offer 5 mV input offset voltage and a nominal 97 dB common-mode rejection ratio. Their 4.5 MHz gain-bandwidth product supports signal bandwidth beyond audio fundamentals, while the 13 V/us slew rate allows relatively rapid transitions. A 3.0 V to 44 V operating range accommodates conventional ±15 V supplies, lower-voltage asymmetric rails, and higher industrial supply arrangements when the circuit and output limits permit.

The MC33072 series uses quality bipolar fabrication and monolithic construction. Each channel can operate as an inverting amplifier, non-inverting amplifier, voltage follower, comparator, or general feedback stage when suitable output swing and stability conditions are respected. Because it is a dual amplifier, both channels share the package supply pins and ground connection, allowing two related signal operations to be implemented in one component.

Typical uses include industrial sensor conditioning, current-loop receivers, audio preamplification, active filters, waveform shaping, and general instrumentation. The 13 V/us slew rate is beneficial for low-amplitude, higher-frequency signals, while the 5 mV offset specification supports accurate closed-loop operation around a stable reference. Its single-supply capability is useful in portable and embedded equipment where generating a negative rail would otherwise add cost and complexity.

Design the circuit around the manufacturer's recommended operating region and ensure the input common-mode range and output swing remain valid at the selected supply voltage. Keep feedback-loop compensation stable, place decoupling capacitors close to the supply pins, and route high-impedance input nodes with short traces and suitable guarding. The 8-pin PDIP package is intended for through-hole assembly and thermal evaluation on the board rather than compact surface-mount designs.

This page combines the manufacturer's MC33072 product information with package characteristics, drop-in alternatives, application guidance, and practical circuit-design notes. It is intended to accelerate component selection while preserving the need to verify operating limits, external circuitry, and PCB-specific requirements before production release.

直接替換替代品,適用於 MC33072PG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MC33072PG (相同外形與佔位) — 差異在於 Mounting Type, Slew Rate, Input Offset Voltage, Package, Amplifier Type.

STMicroelectronics
Mounting Type: Surface mount
Slew Rate: 0.6 V/us
Package: 8-pin SOIC
比較對象 MC33072PG →
onsemi
Mounting Type: Through-hole insertion
Input Offset Voltage: 5 mV
Package: 8-PDIP, 0.300 in (7.62 mm) pitch
比較對象 MC33072PG →
Texas Instruments
Mounting Type: Through Hole
Slew Rate: 13 V/µs (typical)
Input Offset Voltage: 3 mV (typical, C grade)
比較對象 MC33072PG →

MC34072PG

✅ 直接替換
onsemi
📦 8-PDIP (0.300 inch, 7.62 mm pitch)
Dual general-purpose operational amplifier · 2 circuits · Single-ended · 3 V to 44 V · 4.5 MHz · 13 V/us · 5 mV · Quality bipolar fabrication without JFET input technology

聯絡詢價

查看資料表 →

MC33072AP

✅ 直接替換
📦 8-PDIP (0.300 inch, 7.62 mm pitch)
Same MC33072 dual-amplifier family and 4.5 MHz bandwidth; orderable suffix and grade details differ by 0% in the shared core ratings

📋 參考替代品(不在目錄中)

MC34072AP

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-PDIP (0.300 inch, 7.62 mm pitch)
Same 4.5 MHz bandwidth and 13 V/us slew rate as MC33072PG; variant grade and ordering suffix differ

📋 參考替代品(不在目錄中)

TL072CP

✅ 直接替換
Texas Instruments
📦 8-PDIP (0.300 inch, 7.62 mm pitch)
Texas Instruments · Active · JFET-Input Operational Amplifier · 2 (Dual) · 13 V/µs (typical) · 3 MHz (typical) · 30 pA (typical) · 3 mV (typical, C grade)

聯絡詢價

查看資料表 →

LM072

✅ 直接替換
📦 8-PDIP (0.300 inch, 7.62 mm pitch)
Dual bipolar amplifier in the same 8-PDIP footprint; gain-bandwidth product is approximately 3 MHz versus 4.5 MHz, about 33% lower

📋 參考替代品(不在目錄中)

MC33072PG 最大額定值與電氣特性

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 2 circuits
Architecture Voltage-feedback dual amplifier
Semiconductor Technology Bipolar
Supply Voltage Range 3.0 V to 44 V
Single-Supply Operation Supported
Split-Supply Operation Supported
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/us
Input Offset Voltage 5 mV maximum
Common-Mode Rejection Ratio 97 dB nominal
工作溫度範圍 -40 C to +85 C
封裝 8-PDIP, 0.300 inch (7.62 mm) pitch
Packaging Tube
安裝類型 Through-hole
RoHS 狀態 RoHS-compliant and lead-free

MC33072PG 8-pdip, 0.300 inch (7.62 mm) pitch 腳位配置指南

MC33072PG(8-pdip, 0.300 inch (7.62 mm) pitch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MC33072PG 的 8-pdip, 0.300 inch (7.62 mm) pitch 封裝腳位圖

無詳細腳位定義資料: MC33072PG.

請參閱 資料表 以查看完整腳位配置。

典型應用

MC33072PG 適用於 6 應用s: Industrial Sensor Signal Conditioning, Audio Preamplification, Current-Loop Signal Conditioning, Waveform Shaping and Filtering, Precision Control and Measurement, Portable Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The MC33072PG fits industrial sensor-conditioning circuits that need two amplifiers in one 8-PDIP package. Its 4.5 MHz gain-bandwidth product and 13 V/us slew rate preserve signal fidelity for moderately fast sensor outputs, while the 5 mV maximum input offset voltage and 97 dB nominal CMRR support accurate amplification of low-level signals. The two channels can implement a differential input stage followed by a gain or filter stage, reducing external component count. The 3.0 V to 44 V supply range accommodates industrial rails, although the common-mode and output-swing limits must be checked at every operating point.

🎧

Audio Preamplification

The MC33072PG is suitable for small audio preamplifier and active-filter stages where a dual amplifier provides economy and compactness. Its 13 V/us slew rate is substantially higher than the slew rate required by many low-frequency audio signals, providing margin for larger transient signals, while the 4.5 MHz gain-bandwidth product extends beyond the principal audio band. The bipolar architecture avoids the need for a JFET input stage. Designers should still verify input bias current, output swing, channel matching, and distortion at the selected gain and supply voltage before production.

⚡

Current-Loop Signal Conditioning

The MC33072PG can support current-loop receivers and industrial transmitter interfaces requiring dual active filtering and amplification. Its 97 dB nominal common-mode rejection ratio helps reject differential noise present on shared measurement lines, while the 5 mV maximum input offset voltage supports low-level loop-voltage accuracy. The 4.5 MHz gain-bandwidth product permits closed-loop filters above the main measurement bandwidth, and the 13 V/us slew rate improves transient response. Supply the device from a rail compatible with the loop voltage and check input common-mode range carefully at the highest and lowest sensor outputs.

📺

Waveform Shaping and Filtering

The MC33072PG is useful in waveform-shaping, active-filter, and pulse-processing circuits where the 4.5 MHz gain-bandwidth product and 13 V/us slew rate provide useful bandwidth for low-amplitude signals. Its two channels can create complementary active stages or independent filter sections, reducing board area compared with separate single amplifiers. Because bipolar input devices draw bias current, source impedance and feedback-resistor values must be selected to control offset and bias-current errors. Validate the closed-loop response, output swing, and stability with the external component values planned for production.

🖥️

Precision Control and Measurement

The MC33072PG can be used in control and measurement circuits where two related analog channels amplify a sensed variable and buffer its reference. Its 5 mV maximum input offset voltage and nominal 97 dB CMRR support accurate operation around a low-level reference, while the 4.5 MHz bandwidth and 13 V/us slew rate accommodate practical control-loop dynamics. The 3.0 V to 44 V operating range supports operation from low-voltage systems through conventional bipolar-style rails. Compensation networks, grounding, and supply bypassing should be designed around the actual feedback topology and verified for noise, settling, and output-load behavior.

📱

Portable Instrumentation

The MC33072PG is suitable for portable instrumentation designed around a single positive supply. Starting operation at 3.0 V helps support compact systems, and the dual configuration can implement gain and filtering stages in one through-hole package. The 4.5 MHz gain-bandwidth product is adequate for many low-level measurement and control paths, while the 13 V/us slew rate reduces output-transition constraints. Single-supply designs normally require an input reference near mid-supply and careful attention to input and output ranges. Minimize power-supply noise, maintain a low-impedance reference, and confirm offset behavior across the intended temperature range.

推薦產品摘要

MC34072PG onsemi 用於: Industrial Sensor Signal Conditioning, Current-Loop Signal Conditioning, Precision Control and Measurement TL072 Dual amplifier cross-reference candidate 用於: Industrial Sensor Signal Conditioning, Current-Loop Signal Conditioning, Portable Instrumentation MC33072AP Same-family PDIP amplifier variant 用於: Audio Preamplification, Waveform Shaping and Filtering, Portable Instrumentation LM072 Dual bipolar audio-stage alternative 用於: Audio Preamplification, Precision Control and Measurement MC34072AP Same-family dual amplifier alternative 用於: Waveform Shaping and Filtering
What is the operating voltage range of MC33072PG?
The MC33072PG operates from 3.0 V to 44 V, allowing use with single, split, and asymmetric supply arrangements. According to the onsemi MC33072 product page, the amplifier is particularly suited to single-supply operation while retaining support for split supplies. Input common-mode and output-swing limits must also remain valid at the selected rail voltage.
What are the key specifications of MC33072PG that engineers should know?
The MC33072PG is a dual bipolar operational amplifier with a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate. It also offers 5 mV maximum input offset voltage and a nominal 97 dB CMRR. These characteristics place it between general-purpose and higher-speed precision designs. The onsemi MC33072 product page identifies the device as a quality bipolar, dual operational amplifier.
Where can I download the MC33072PG datasheet PDF?
The official MC33072 documentation is available through the onsemi MC33072 product page at https://www.onsemi.com/products/standard-products/amplifiers-comparators/operational-amplifiers-op-amps/mc33072. Use the manufacturer's datasheet for the complete pin description, electrical characteristics, recommended operating conditions, application information, and package drawings before finalizing a circuit.
Where can I find the MC33072PG pinout?
Use the pin-description table and package drawing in the onsemi MC33072 datasheet to identify every MC33072PG connection. The device is supplied in an 8-PDIP package with 0.300 inch (7.62 mm) lead pitch. Confirm pin orientation against the physical board and do not infer connections from similarly named quad or dual amplifier packages.
Is the MC33072PG suitable for single-supply operation?
Yes, the MC33072PG is suitable for single-supply operation within its 3.0 V to 44 V rating. This makes it useful for powered instrumentation and embedded analog circuits that lack a negative rail. Input biasing may require a mid-supply reference, and the selected feedback network must keep both inputs within the common-mode range and the output within its valid swing.
What is the MC33072PG gain-bandwidth product and slew rate?
The MC33072PG has a 4.5 MHz gain-bandwidth product and a 13 V/us slew rate. According to the onsemi MC33072 product page, these values are achieved without using JFET device technology. The bandwidth limits closed-loop response at higher gains, while slew rate limits how quickly the output can follow large-amplitude changes.
MC33072PG vs MC34072PG - which is better for industrial applications?
The MC33072PG and MC34072PG share the dual 4.5 MHz gain-bandwidth and 13 V/us slew-rate characteristics, but their operating classifications should be compared from their individual datasheets before substitution. Both are presented as monolithic bipolar operational amplifiers in the MC33071/72/74 and MC34071/72/74 families. Temperature grade, offset limits, and exact electrical limits determine the better choice.
What is the difference between MC33072PG and TL072?
The MC33072PG provides a 4.5 MHz gain-bandwidth product, while the commonly compared TL072 is a lower-bandwidth dual bipolar amplifier. Both can implement standard inverting, non-inverting, and voltage-follower stages, but input offset, bias current, output swing, noise, and supply limits require separate review. TL072 is a cross-family alternative, not an unconditional functional match.
When should I choose MC33072PG over TL072?
Choose MC33072PG when the design benefits from its 4.5 MHz gain-bandwidth product and 13 V/us slew rate. TL072 may be suitable when its lower bandwidth and offset characteristics meet the application and cost constraints. Neither choice should be based only on the amplifier count: verify the complete MC33072PG electrical limits against the selected alternative for the intended supply and signal range.
Is MC33072PG suitable for sensor conditioning and industrial instrumentation?
The MC33072PG fits many industrial sensor-conditioning and instrumentation circuits because it combines a dual amplifier, 4.5 MHz bandwidth, 13 V/us slew rate, and a 3.0 V to 44 V supply range. Its 5 mV maximum input offset voltage and nominal 97 dB CMRR help preserve accuracy. The actual suitability also depends on sensor output range, common-mode limits, required noise performance, and calibration goals.
What can replace MC33072PG as a drop-in part?
MC34072PG is the closest same-brand drop-in candidate because it shares the dual bipolar amplifier architecture, 4.5 MHz bandwidth, 13 V/us slew rate, and 8-pin PDIP format. MC33072AP is another same-family candidate in the PDIP-based MC33072 range. Any substitute must be checked for offset voltage, bias current, common-mode range, output swing, supply limits, and exact pin arrangement.
Is MC33072PG the same as MC33072AP?
No, MC33072PG and MC33072AP are different orderable variants within the dual MC33072 family rather than identical MPNs. The family shares the core dual bipolar amplifier design, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate. Packaging, temperature, or qualification details should be confirmed from each variant's ordering information before treating one as a drop-in replacement.
Where can I buy MC33072PG and check current availability?
Use the Request a Quote form on this page to request the current MC33072PG price, stock position, lead time, and order quantity. Because availability and commercial terms can change, request them for the exact MPN rather than relying on a historical catalog figure. Identify the required tube packaging and operating conditions when submitting the request.
How long is the lead time for MC33072PG?
Lead time for MC33072PG should be confirmed through the Request a Quote form on this page for the requested quantity and tube packaging. The onsemi MC33072 product page identifies the MC33072 family within its standard operational-amplifier products, but current manufacturing and distribution schedules remain commercial information. Submit the MPN, quantity, and required delivery date in the request.
How do I design a stable PCB layout for MC33072PG?
Place supply-decoupling capacitors close to the IC supply pins, keep input and feedback traces short, and return output loading away from sensitive input nodes. Use the manufacturer pin-description table and application guidance to preserve the intended topology. In high-impedance circuits, guard or shield input traces, provide a defined reference for single-supply biasing, and prototype the feedback network to confirm stable operation.

工程參考資料,適用於 MC33072PG — 比較、設計指引及合規資訊。

選型指南

Choose MC33072PG when a dual bipolar amplifier with 4.5 MHz bandwidth, 13 V/us slew rate, and a 3.0 V to 44 V supply range is required in an 8-PDIP design. MC34072PG is the closest same-brand candidate because it shares the principal bandwidth and slew-rate ratings, making it the first option to examine when the exact grade and electrical limits are equivalent. MC33072AP and MC34072AP are additional same-family PDIP variants that require suffix-level review. TL072 and LM072 may be useful when the application does not need the MC33072PG's 4.5 MHz bandwidth, but their lower bandwidth and different offset, bias-current, noise, and supply-limit characteristics require a complete electrical comparison. For any replacement, confirm the exact eight-pin layout, common-mode range, output swing, input bias current, temperature grade, and load behavior before approving it as a drop-in substitution.

與替代品比較

參數 本產品 MC34072PG MC33072AP MC34072AP TL072 LM072
Package 8-PDIP (0.300 inch, 7.62 mm pitch) 8-PDIP (0.300 inch, 7.62 mm pitch) 8-PDIP (0.300 inch, 7.62 mm pitch) 8-PDIP (0.300 inch, 7.62 mm pitch) 8-PDIP (0.300 inch, 7.62 mm pitch) 8-PDIP (0.300 inch, 7.62 mm pitch)
Brand onsemi onsemi onsemi onsemi Texas Instruments Texas Instruments
Amplifier Count 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 4.5 MHz 4.5 MHz 4.5 MHz 4.5 MHz Approximately 3 MHz Approximately 3 MHz
Technology Bipolar Bipolar Bipolar Bipolar Bipolar Bipolar

主要差異化特點

  • Higher gain-bandwidth product than the TL072 cross-reference family (對比TL072)
  • Higher gain-bandwidth product than the LM072 cross-reference family (對比LM072)
  • Wide 3.0 V to 44 V supply operating range (對比MC34072PG)

設計說明

Place the supply-decoupling capacitors close to the MC33072PG supply pins and connect them to a low-impedance ground plane. Keep the feedback components close to the relevant amplifier pins, and minimize the distance from high-impedance input nodes to the IC. In single-supply circuits, route the mid-supply reference through a quiet divider or buffered reference stage and avoid sharing that trace with output-load currents.

Do not assume that a nominal 44 V supply rating means the amplifier can process a 44 V input signal. The input common-mode range and output swing remain separate constraints, and the valid limits depend on the supply arrangement. Confirm both channels against the actual minimum and maximum signal values, including transient overshoot, before applying the device to high-voltage instrumentation.

Bipolar input bias current can create offset errors when source impedance is high. Keep source impedances balanced where channel matching matters and avoid excessive feedback-resistor values. For fast or low-amplitude stages, use short feedback paths, appropriate bandwidth compensation, and an output isolation resistor when capacitive loading requires it. Evaluate settling and ringing on a prototype rather than relying only on nominal bandwidth.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Unknown

The product-page information identifies MC33072PG as RoHS-compliant and lead-free. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement was established for this exact ordering code.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

mc33072 datasheet MC33072PG datasheet MC33072PG datasheet pdf MC33072PG pinout MC33072PG equivalent MC33072PG replacement MC33072PG vs MC34072PG MC33072PG vs TL072 onsemi MC33072PG MC33072PG 4.5MHz 13V/us MC33072PG 8-PDIP pinout MC33072PG price MC33072PG stock MC33072PG application circuit

相關元件與詞彙

onsemi MC33072PG MC33072 MC34072PG MC33072AP MC34072AP TL072 LM072 operational amplifier voltage-feedback amplifier dual amplifier analog signal-processing IC semiconductor bipolar gain-bandwidth product slew rate input offset voltage common-mode rejection ratio single-supply operation split-supply operation 8-PDIP through-hole package industrial instrumentation sensor signal conditioning RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情