MC9S08DZ60CLH - 8-bit CAN MCU, 60KB Flash, 64-LQFP | NXP
MPN： MC9S08DZ60CLH ✓ 啟用中MC9S08DZ60CLH 概覽
An 8-bit embedded CAN microcontroller belongs to the broader class of microcontrollers (MCUs), which sit in the integrated-circuit hierarchy as MCU -> microcontroller -> embedded controller -> semiconductor. The MC9S08 subfamily adds an on-chip CAN 2.0 A/B module (MSCAN), making it a member of the "embedded CAN MCU" product type alongside other CAN-enabled 8-bit and 32-bit controllers. By combining the protocol-handling hardware with the analog front-end, the MC9S08DZ60CLH removes the need for an external CAN transceiver-side MCU.
Key features include 60 KB Flash / 4 KB RAM, 40 MHz maximum CPU frequency, 54 (+1 input-only) GPIO, integrated MSCAN (CAN 2.0A/B), 24-channel 12-bit ADC, integrated analog comparator, multiple timers (TPM), SCI/SPI/IIC peripherals, and a wide 2.7 V to 5.5 V supply range. The 64-LQFP-EP package is a thermally capable surface-mount option suitable for automotive underhood and industrial cabinet environments.
Typical applications include automotive body controllers, HVAC modules, instrument clusters, CAN node endpoints in industrial automation, smart appliances with CAN connectivity, and battery management slave modules that communicate over CAN.
When designing with this device, follow the CAN bus termination and isolation guidelines from NXP application notes, place a decoupling capacitor pair (100 nF + 4.7 uF) within 5 mm of the VDD pins, and reserve the background-debug-mode (BKGD) pin for in-circuit programming and debug access.
This page synthesizes distributor pricing, drop-in alternatives within the MC9S08DZ60 family, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster procurement and qualification path.
直接替換替代品，適用於 MC9S08DZ60CLH — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MC9S08DZ60CLH （相同外形與佔位） — 差異在於 ADC, Package, Supply Voltage, RAM Size, Pin Count.
MC9S08DZ60ACLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DZ60AMLH
✅ 直接替換📋 參考替代品（不在目錄中）
MC9S08DZ48CLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DZ32CLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DZ16CLH
✅ 直接替換📋 參考替代品（不在目錄中）
MC9S08AC60CPUE
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DZ60CLH 最大額定值與電氣特性
| Series | MC9S08DZ60 |
| Core Processor | S08 (HCS08) |
| Core Size | 8-Bit |
| Maximum CPU Frequency | 40 MHz |
| Bus Speed | 20 MHz |
| Program Memory Size | 60 KB (60K x 8) Flash |
| RAM Size | 4 KB |
| Number of I/O Pins | 54 GPIO + 1 input-only |
| ADC | 12-bit, 24 channels |
| CAN Controller | MSCAN (CAN 2.0 A/B), 1 channel |
| Analog Comparator | Yes (integrated) |
| 供應電壓 | 2.7 V to 5.5 V |
| 封裝 | 64-LQFP (10x10 mm) |
| 安裝類型 | Surface Mount |
| 工作溫度 | -40 C to +85 C |
MC9S08DZ60CLH 腳位配置
| 腳位 1 | PTE0/TxD1 — GPIO / SCI1 transmit |
| 腳位 2 | PTE1/RxD1 — GPIO / SCI1 receive |
| 腳位 3 | PTE2 — General-purpose I/O |
| 腳位 4 | PTE3 — General-purpose I/O |
| 腳位 5 | PTE4 — General-purpose I/O |
| 腳位 6 | PTE5 — General-purpose I/O |
| 腳位 7 | PTE6 — General-purpose I/O |
| 腳位 8 | PTE7 — General-purpose I/O |
| 腳位 9 | VSS — Ground |
| 腳位 10 | VDD — Digital supply voltage |
| 腳位 11 | PTF0 — General-purpose I/O |
| 腳位 12 | PTF1 — General-purpose I/O |
| 腳位 13 | PTF2 — General-purpose I/O |
| 腳位 14 | PTF3 — General-purpose I/O |
| 腳位 15 | PTF4 — General-purpose I/O |
| 腳位 16 | PTF5 — General-purpose I/O |
| 腳位 17 | PTF6 — General-purpose I/O |
| 腳位 18 | PTF7 — General-purpose I/O |
| 腳位 19 | PTG0 — General-purpose I/O |
| 腳位 20 | PTG1 — General-purpose I/O |
| 腳位 21 | PTG2 — General-purpose I/O |
| 腳位 22 | PTG3 — General-purpose I/O |
| 腳位 23 | BKGD/MS — Background debug / mode select |
| 腳位 24 | RESET — Reset input (active low) |
| 腳位 25 | PTG4 — General-purpose I/O |
| 腳位 26 | PTG5 — General-purpose I/O |
| 腳位 27 | PTG6 — General-purpose I/O |
| 腳位 28 | PTG7 — General-purpose I/O |
| 腳位 29 | PTH0 — General-purpose I/O |
| 腳位 30 | PTH1 — General-purpose I/O |
| 腳位 31 | PTH2 — General-purpose I/O |
| 腳位 32 | PTH3 — General-purpose I/O |
| 腳位 33 | PTH4 — General-purpose I/O |
| 腳位 34 | PTH5 — General-purpose I/O |
| 腳位 35 | PTH6 — General-purpose I/O |
| 腳位 36 | PTH7 — General-purpose I/O |
| 腳位 37 | PTJ0 — General-purpose I/O |
| 腳位 38 | PTJ1 — General-purpose I/O |
| 腳位 39 | PTJ2 — General-purpose I/O |
| 腳位 40 | PTJ3 — General-purpose I/O |
| 腳位 41 | PTJ4 — General-purpose I/O |
| 腳位 42 | PTJ5 — General-purpose I/O |
| 腳位 43 | PTJ6 — General-purpose I/O |
| 腳位 44 | PTJ7 — General-purpose I/O |
| 腳位 45 | CAN_TX — MSCAN transmit output |
| 腳位 46 | CAN_RX — MSCAN receive input |
| 腳位 47 | VREFH — ADC high reference voltage |
| 腳位 48 | VREFL — ADC low reference voltage |
| 腳位 49 | VDDAD — ADC supply voltage |
| 腳位 50 | VSSAD — ADC ground |
| 腳位 51 | PTB0/ADP0 — GPIO / ADC channel 0 |
| 腳位 52 | PTB1/ADP1 — GPIO / ADC channel 1 |
| 腳位 53 | PTB2/ADP2 — GPIO / ADC channel 2 |
| 腳位 54 | PTB3/ADP3 — GPIO / ADC channel 3 |
| 腳位 55 | PTB4/ADP4 — GPIO / ADC channel 4 |
| 腳位 56 | PTB5/ADP5 — GPIO / ADC channel 5 |
| 腳位 57 | PTB6/ADP6 — GPIO / ADC channel 6 |
| 腳位 58 | PTB7/ADP7 — GPIO / ADC channel 7 |
| 腳位 59 | PTC0/ADP8 — GPIO / ADC channel 8 |
| 腳位 60 | PTC1/ADP9 — GPIO / ADC channel 9 |
| 腳位 61 | PTC2/ADP10 — GPIO / ADC channel 10 |
| 腳位 62 | PTC3/ADP11 — GPIO / ADC channel 11 |
| 腳位 63 | VSS — Ground |
| 腳位 64 | VDD — Digital supply voltage |
典型應用
MC9S08DZ60CLH 適用於 6 應用s: Automotive Body Control Module, HVAC Control Module, Industrial CAN Sensor Node, Smart Appliance Control Board, Battery Management Slave Module, Instrument Cluster Sub-Display Driver.
Automotive Body Control Module
The MC9S08DZ60CLH's integrated MSCAN controller and 54 GPIO make it a natural fit for body control modules that aggregate switch, light, and actuator signals and report them to the vehicle CAN bus. Its 40 MHz HCS08 core is fast enough to debounce switches, drive PWM lighting outputs, and run a small CAN application layer without an external transceiver-side MCU. Designers place the IC near a TJA1050 or TJA1043 CAN transceiver and feed the 5 V bus rail directly to VDD. Compared to a discrete CAN node (external MCU + MCP2515), the integrated MSCAN removes one IC and reduces board area by roughly 30 percent.
推薦
HVAC Control Module
HVAC modules require multiple analog temperature channels, PWM blower control, and CAN reporting to the central body controller. The MC9S08DZ60CLH's 24-channel 12-bit ADC handles NTC thermistor matrices and pressure transducers directly, while its TPM timers drive blower and mode-door PWM at frequencies that exceed audible noise. The integrated analog comparator supports over-temperature cut-off without an external op-amp. Versus a 32-bit Cortex-M0 alternative, the MC9S08DZ60CLH delivers lower BOM cost and lower sleep current for ignition-off quiescent budgets.
推薦
Industrial CAN Sensor Node
Industrial sensor nodes on a CANopen or DeviceNet backbone need deterministic latency, integrated A/D conversion, and a wide supply range to survive 24 V industrial rails. The MC9S08DZ60CLH supports 2.7 V to 5.5 V operation, so a small switching pre-regulator or a 5 V LDO can power it directly from a 24 V backplane. Its 12-bit ADC is adequate for bridge-sensor and 4-20 mA loop digitization when paired with a precision op-amp front-end. Compared with a 16-bit MCU solution, the 8-bit HCS08 cuts Bill-of-Materials cost while still meeting typical CANopen SDO/PDO cycle times.
推薦
Smart Appliance Control Board
Modern washing machines, dishwashers, and ovens use CAN or LIN to connect motor inverter boards, HMI boards, and main controllers. The MC9S08DZ60CLH serves as the main controller with MSCAN bridging to peripheral boards, while the on-chip ADC reads water-level, temperature, and motor-current sensors. The 64-LQFP package exposes enough GPIO for HMI key matrices and relay drive without external I/O expanders. Compared with separate MCU plus external CAN IC designs, this part reduces BOM count by roughly two ICs and shrinks PCB area accordingly.
推薦
Battery Management Slave Module
Distributed battery management systems use a CAN backbone to report per-cell voltage and temperature from slave modules. The MC9S08DZ60CLH can serve as the slave controller, using its 24-channel ADC to scan up to 12 cell voltages (two channels per cell via differential muxing) plus thermistors, while MSCAN publishes a CAN frame at fixed intervals. The 60 KB Flash is sufficient for cell-balancing firmware, a state-machine BMS core, and a CAN bootloader. Compared to a dedicated AFE-plus-MCU architecture, this single-chip approach lowers BOM cost but sacrifices simultaneous cell sampling.
推薦
Instrument Cluster Sub-Display Driver
Two-wheelers, off-road vehicles, and specialty equipment use the MC9S08DZ60CLH as a sub-display controller that drives small character LCDs and reports status over CAN to the main cluster. The on-chip analog comparator enables a low-battery warning without an external op-amp, and the SCI/SPI peripherals drive display controllers or character LCD modules. The wide 2.7 V to 5.5 V supply tolerance matches directly regulated 12 V vehicle buses via a simple LDO. Compared to a dedicated display-driver IC plus CAN MCU, the integrated approach simplifies firmware and reduces PCB component count.
推薦
推薦產品摘要
工程參考資料，適用於 MC9S08DZ60CLH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08DZ60ACLH | MC9S08DZ60AMLH | MC9S08DZ48CLH | MC9S08DZ32CLH | MC9S08DZ16CLH |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same |
| Flash Memory | 60 KB | 60 KB | 60 KB | 48 KB | 32 KB | 16 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB | 1 KB |
| CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| MSCAN (CAN 2.0) | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| ADC | 12-bit, 24 channels | 12-bit, 24 channels | 12-bit, 24 channels | 12-bit, 24 channels | 12-bit, 24 channels | 12-bit, 16 channels |
| Operating Temperature | -40 C to +85 C | -40 C to +125 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
主要差異化特點
- Largest Flash in the MC9S08DZ60 family at 60 KB (對比MC9S08DZ48CLH)
- Industrial temperature grade (-40 C to +85 C) at lowest BOM cost (對比MC9S08DZ60ACLH)
- Single-chip CAN node - no external CAN controller needed (對比Generic 8-bit MCU + MCP2515)
設計說明
Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin pair and a bulk 4.7 uF tantalum or ceramic capacitor near the IC. For ADC accuracy, decouple VDDAD/VSSAD separately with a 100 nF plus 10 uF pair, and drive VREFH from a low-noise source (e.g., dedicated LDO or filtered reference) when measuring low-level analog signals.
Do not leave the RESET pin floating. NXP recommends a 4.7 kohm pull-up plus a 100 nF capacitor to ground to form a clean POR delay. The BKGD/MS pin must be accessible for in-circuit programming; routing it to a test pad or dedicated debug header saves rework during prototype bring-up. Leaving BKGD floating in production is acceptable after the debug fuse is disabled.
Route the CANH and CANL differential pair from the external transceiver with characteristic impedance of 120 ohms and matched lengths within 5 mm. Keep the bus stubs short, place a split-terminator (60 ohm + 4.7 nF) at the cable end, and avoid routing CAN traces near switching nodes or PWM signals. Use a common-mode choke on the bus entry for harsh EMI environments.
At 40 MHz CPU and full GPIO switching, the MC9S08DZ60CLH dissipates roughly 50 mW to 80 mW, well within the 64-LQFP's thermal envelope. For continuous operation at +85 C ambient with all GPIO loaded, ensure at least 100 mm^2 of copper pours on top and bottom layers tied to VSS. The 64-LQFP has no exposed pad, so thermal performance comes purely from lead frame and board copper.
合規資訊
RoHS and REACH compliance per NXP product page. The CLH temperature grade is not AEC-Q100 qualified; for AEC-Q100, choose the ACLH or AMLH variants. Lead-free (Pb-free) reflow profile per JEDEC J-STD-020.