MCF52210CVM66 - 66MHz ColdFire V2 64KB Flash MCU | NXP
MPN： MCF52210CVM66 ✗ 停產MCF52210CVM66 概覽
A microcontroller is a semiconductor device that integrates a processor core, memory, input/output interfaces, and peripherals on one package. The MCF52210CVM66 belongs to the ColdFire reduced-instruction-set-computing family, a 32-bit embedded processor hierarchy designed for control-oriented applications. The ColdFire V2 core provides a 32-bit processing architecture while retaining a resource-conscious embedded design appropriate for connected control products.
The verified device data identifies a 66 MHz operating speed, 64 KB flash, 16K x 8 RAM, 55 I/O, and an internal oscillator. USB OTG is a key connectivity feature for designs requiring USB device or host functionality. The I2C and SPI interfaces support peripheral expansion and short-distance bus communication, while UART/USART channels support serial links. DMA can offload transfers from the processor, and PWM is useful for timing, motor-control, or signal-generation functions.
The 81-MAPBGA package is a compact surface-mount format, but its fine ball pitch and exposed thermal-management requirements demand careful PCB layout and inspection. MCF52210CVM66 is listed as obsolete in the retrieved part-status data, so production planning should confirm availability, lifecycle status, and any approved sourcing route before committing new designs. The product should not be assumed active merely because distributor listings remain online.
Typical applications include USB-connected control devices, industrial monitoring modules, serial bridges, embedded data-acquisition units, and low-power control boards. The integrated USB OTG interface can simplify USB connectivity, while the ColdFire V2 core and DMA support responsive handling of multiple peripheral transactions. Designers should pair the MCU with the required external memory, power, clock, and signal-integrity components according to the manufacturer datasheet.
This page combines verified distributor specifications, lifecycle information, sourcing context, package details, and design guidance. It is intended to support engineering selection and procurement review while clearly identifying information that still requires confirmation from the original manufacturer documentation.
直接替換替代品，適用於 MCF52210CVM66 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MCF52210CVM66 （相同外形與佔位） — 差異在於 Package, Architecture, Number of I/O, Program Memory Size, Product Type.
MCF52211CVM66
✅ 直接替換聯絡詢價
查看資料表 →MCF52232CAF60
✅ 直接替換📋 參考替代品（不在目錄中）
MCF52234CAL60
✅ 直接替換聯絡詢價
查看資料表 →MCF52221CAE66
✅ 直接替換聯絡詢價
查看資料表 →MCF52100CVM66
✅ 直接替換聯絡詢價
查看資料表 →MCF5211LCVM66
✅ 直接替換聯絡詢價
查看資料表 →MCF52210CVM66 最大額定值與電氣特性
| Product Type | 32-bit RISC microcontroller |
| Processor Core | ColdFire V2 |
| Operating Frequency | 66 MHz |
| Program Memory | 64 KB (64K x 8) flash |
| RAM | 16K x 8 |
| Number of I/O | 55 |
| 封裝 | 81-MAPBGA (10 x 10 mm) |
| Oscillator Type | Internal |
| Connectivity | I2C, SPI, UART/USART, USB OTG |
| Peripherals | DMA, LVD, POR, PWM, WDT |
| Core Architecture | 32-bit |
| Series | MCF5221x |
| Temperature Grade | Industrial |
| 安裝類型 | Surface mount |
| Terminal Count | 81 balls |
| Manufacturer Part Status | Obsolete |
MCF52210CVM66 81-mapbga (10 x 10 mm) 腳位配置指南
MCF52210CVM66（81-mapbga (10 x 10 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MCF52210CVM66.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCF52210CVM66 適用於 6 應用s: USB-Connected Embedded Control, Industrial Monitoring Module, Serial-to-USB Bridge, Low-Power Data Acquisition, Motor and Timing Control, USB Service and Configuration Interface.
USB-Connected Embedded Control
MCF52210CVM66 fits USB-connected control products because the verified specification identifies USB OTG, a 66 MHz ColdFire V2 core, DMA, and 55 I/O. The MCU can coordinate USB traffic with control logic, status reporting, and external peripherals without requiring a separate host processor. A practical design would use the documented USB PHY and power path, connect USB data lines to the correct package balls, and validate enumeration, suspend, resume, and bus-powered operation against the original manufacturer requirements.
推薦
Industrial Monitoring Module
The 55 available I/O and integrated I2C, SPI, UART/USART, and USB OTG make MCF52210CVM66 suitable for an industrial monitoring module that gathers sensor data and forwards it to a host or local controller. Its 66 MHz ColdFire V2 core can service multiple peripheral transactions, while DMA can move data with less processor overhead. The module should use industrial temperature-grade sourcing, isolated communication boundaries where required, robust power regulation, and protection appropriate to the installation environment.
推薦
Serial-to-USB Bridge
MCF52210CVM66 can serve as the control element in a serial-to-USB bridge when a product must preserve a UART/USART or SPI-facing legacy interface while presenting USB to a host. The verified USB OTG capability provides the system-level connectivity path, and the ColdFire V2 core can manage protocol framing and data buffering. Firmware must implement the required USB class, baud-rate control, buffering, timeout behavior, and electrical isolation or level-shifting for the external serial interface.
推薦
Low-Power Data Acquisition
For compact data-acquisition equipment, MCF52210CVM66 offers 16K x 8 RAM, 55 I/O, serial interfaces, DMA, and PWM in one device. These resources can support sensor sampling, local filtering, timing functions, and transfer to a host over USB or UART. Because the supplied data does not specify active or standby current, low-power claims must be validated against the original electrical specifications and the complete firmware duty cycle. Analog front-end accuracy and sensor noise will also dominate measurement performance.
推薦
Motor and Timing Control
The verified PWM and watchdog features make MCF52210CVM66 relevant to compact timing and motor-control subsystems, especially where a 32-bit control loop must coexist with communications. The MCU can generate PWM outputs, monitor feedback through its I/O, coordinate serial commands, and use WDT for recovery from stalled firmware. The design must establish motor-driver protection, current limiting, isolation where required, and timing margins based on the actual actuator and power stage; the MCU itself is not the high-current motor driver.
推薦
USB Service and Configuration Interface
MCF52210CVM66 can provide a service-oriented USB interface for firmware configuration, diagnostics, and field data exchange. USB OTG and the available UART/USART channels allow a compact product to expose service functions while retaining an internal control path. Firmware should include authenticated commands where appropriate, controlled access to configuration registers, and recovery behavior for power-loss events. USB bus protection, connector mechanics, and power sourcing must be designed outside the MCU according to the system requirements.
推薦
推薦產品摘要
工程參考資料，適用於 MCF52210CVM66 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCF52211CVM66 | MCF52232CAF60 | MCF52234CAL60 | MCF52221CAE66 | MCF52100CVM66 | MCF5211LCVM66 |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) | 81-MAPBGA (10 x 10 mm) |
主要差異化特點
- Obsolete lifecycle status requires explicit sourcing review (對比MCF52211CVM66)
- Verified USB OTG connectivity (對比MCF52232CAF60)
- Verified 55-I/O resource count (對比MCF52234CAL60)
設計說明
Treat the 81-MAPBGA footprint as a high-density layout problem and obtain the original package drawing before committing to routing. Verify ball assignments, power and ground distribution, escape-routing feasibility, and assembly inspection requirements. The supplied data confirms an 81-MAPBGA package but does not provide the ball map, stack-up, or land pattern, so do not derive these from the 10 x 10 mm body size alone.
Power budgeting must start with the original datasheet limits because the supplied data does not provide operating current, standby current, or voltage tolerances. Account for USB attachment, external memory, I/O loading, regulator losses, startup current, and the system's chosen firmware workload. Confirm decoupling values and power sequencing against the manufacturer documentation before releasing the schematic.
USB and clock signals require short, controlled routes with return paths maintained. Keep sensitive analog and communication lines away from noisy switching nodes and preserve the referenced ground plane beneath high-speed paths. Because the provided information does not state USB impedance, trace-length, clock, or termination requirements, use the original MCF5221x hardware guidance and validate the final board with the intended USB topology.
Do not substitute a related MCF522x or MCF521x device solely because it is also a ColdFire-family MCU in a similar 10 x 10 mm package. Verify exact ball mapping, memory size, USB behavior, voltage, temperature grade, peripheral availability, startup behavior, and software support. Related-family parts may be design alternatives after engineering review, but they are not automatically drop-in replacements.
合規資訊
The supplied data does not provide compliance declarations for MCF52210CVM66. Compliance must be confirmed from the current manufacturer product documentation and the authorized distributor record.