MCP3304T-BI/SL - 13-Bit 4-Channel SPI ADC | Microchip
MPN: MCP3304T-BI/SL ✓ 啟用中MCP3304T-BI/SL 概覽
An analog-to-digital converter is an integrated circuit that converts continuously varying analog voltages into numeric values for processing, measurement, or control. The MCP3304 belongs to the ADC, data-converter IC, and semiconductor hierarchy. Its multiplexed input structure supports measurement of several sensors or control signals through one converter, while the SPI interface connects it to a microcontroller or other digital controller.
The principal features are 13-bit resolution, four differential or eight single-ended input channels, a 100 kHz conversion rate, and low power consumption. Differential inputs are useful when the measured signal is referenced to another voltage or when common-mode noise must be rejected. Single-ended operation provides a practical choice for battery voltage, temperature-sensor, and resistive-divider measurements.
Internally, the converter uses a successive-approximation architecture. Each conversion resolves the input voltage through successive comparisons and transfers the resulting digital code through the serial interface. The 13-bit format provides 8,192 code levels, making the device suitable for measurement systems that need more resolution than a coarse 8-bit ADC without requiring the complexity and power of a higher-resolution converter.
Typical uses include remote sensor acquisition, battery-powered instrumentation, industrial process monitoring, portable measurement equipment, and embedded data loggers. The MCP3304 is especially appropriate when several analog channels must share a compact PCB area and communicate through a standard serial bus. Its low-power operating approach also benefits systems in which the duty cycle of active acquisition is limited.
When laying out the circuit, reserve the 16-pin SOIC footprint exactly as shown in the package drawing and confirm signal limits, reference-voltage requirements, and acquisition timing in the manufacturer datasheet. Place input and reference components close to their associated pins, maintain a clean return path, and account for digital-interface activity during analog conversion. Proper grounding and reference decoupling are especially important in systems combining low-level sensor signals with switching or wireless circuitry.
This product page consolidates the manufacturer device description, distributor identification, package details, and practical use-case guidance for engineers evaluating the MCP3304T-BI/SL. It also provides focused guidance for comparison, sourcing, layout, and drop-in replacement decisions without replacing the complete electrical characteristics and timing information in the Microchip datasheet.
直接替換替代品,適用於 MCP3304T-BI/SL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3304T-BI/SL (相同外形與佔位) — 差異在於 Input Configuration, Input Type, Package, Power Consumption, Sampling Rate.
MCP3304T-AI/SL
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MCP3304T-BI/SL 最大額定值與電氣特性
| Converter Type | 13-bit successive-approximation ADC |
| Input Configuration | 4 differential or 8 single-ended inputs |
| 取樣率 | 100 kHz |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Digital Interface | SPI serial interface |
| Input Type | Differential and single-ended analog inputs |
| 解析度 | 13 bit |
| Number of ADC Channels | 4 channels |
| Total Input Options | 8 inputs |
| 封裝 | 16-pin SOIC |
| Power Consumption | Low-power operation |
| Conversion Architecture | Successive approximation |
| Application Area | Battery-powered systems and remote data acquisition |
| Manufacturer | Microchip Technology |
MCP3304T-BI/SL 16-pin soic 腳位配置指南
MCP3304T-BI/SL(16-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3304T-BI/SL.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3304T-BI/SL 適用於 6 應用s: Remote Sensor Data Acquisition, Battery-Powered Instrumentation, Industrial Process Monitoring, Temperature and Voltage Monitoring, Embedded Data Logger, Precision Control Input Module.
Remote Sensor Data Acquisition
The MCP3304T-BI/SL suits remote monitoring systems that must acquire several sensor signals through a compact, low-power interface. Four differential channels can measure bridge outputs or paired voltages with better rejection of common-mode disturbance, while the alternative single-ended configuration supports eight grounded inputs. The 100 kHz conversion capability provides margin for multiplexed measurements, and the SPI interface allows straightforward connection to a microcontroller. Microchip specifically identifies remote data acquisition and battery-powered operation as target use cases for the MCP3304 family.
推薦
Battery-Powered Instrumentation
The MCP3304T-BI/SL is appropriate for portable meters and battery-operated instruments that need more measurement resolution than a coarse 8-bit converter. Its 13-bit format represents the input range with 8,192 code levels, while four differential or eight single-ended inputs increase channel density without requiring one converter per signal. Low-power operation supports duty-cycled acquisition, and SPI transfers digital results efficiently to a low-power controller. The 4.5 V to 5.5 V operating range makes supply planning straightforward in regulated 5 V systems.
推薦
Industrial Process Monitoring
The MCP3304T-BI/SL can serve as the analog measurement front end in industrial monitoring equipment that tracks several process variables. Differential inputs are valuable for transducers with balanced outputs, while single-ended inputs can monitor relay-contact status, scaled sensor voltages, or resistive-divider networks. A 100 kHz successive-approximation converter is fast enough for many supervisory and logging tasks, and the 16-pin SOIC package simplifies assembly in conventional industrial-control hardware.
推薦
Temperature and Voltage Monitoring
The MCP3304T-BI/SL can monitor thermistors, analog temperature sensors, supply rails, and other slowly changing voltages in embedded systems. Eight single-ended inputs reduce component count when several thresholds or operating parameters must be tracked. The 13-bit resolution provides finer quantization than an 8-bit converter, helping distinguish small changes in sensor voltage. Use a stable reference implementation and place the sensor or divider network near the input structure when long traces could introduce error.
推薦
Embedded Data Logger
The MCP3304T-BI/SL fits compact embedded data loggers that periodically sample several analog channels and store the results through a microcontroller. Four differential channels support paired sensor inputs, while eight single-ended inputs expand channel count for mixed measurements. The 100 kHz conversion rate allows acquisition to proceed faster than most low-rate logging cycles, and SPI provides a defined serial path for transferring each conversion result. Low-power operation is advantageous when the logger spends most of its time between measurement intervals.
推薦
Precision Control Input Module
The MCP3304T-BI/SL can provide a precision measurement channel for control systems that need feedback from potentiometers, dividers, transducers, or external command interfaces. Differential operation is advantageous for signals with a midpoint reference or common-mode content, and 13-bit resolution supports more precise control decisions. The SPI interface allows sampled values to be read directly by a control microcontroller. Firmware should account for channel multiplexing, acquisition timing, and reference behavior when establishing control-loop timing.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3304T-BI/SL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3304T-AI/SL |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 16-pin SOIC | 16-pin SOIC |
| Resolution | 13 bit | 13 bit |
| ADC Channels | 4 channels | 4 channels |
| Input Configuration | 4 differential or 8 single-ended inputs | 4 differential or 8 single-ended inputs |
| Sampling Rate | 100 kHz | 100 kHz |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Interface | SPI serial interface | SPI serial interface |
| Temperature Grade | Industrial grade | Automotive grade |
主要差異化特點
- Four-channel density with differential or single-ended operation (對比MCP3304T-AI/SL)
- 100 kHz multiplexed sampling performance (對比MCP3304T-AI/SL)
- Industrial configuration for non-automotive equipment (對比MCP3304T-AI/SL)
設計說明
Use the manufacturer 16-pin SOIC land pattern and verify the PCB pin numbering against the current package drawing before routing. Place input, reference, and supply bypass components close to their associated device pins. Sensitive analog traces should remain short and isolated from SPI clock and digital return paths; if the PCB supports both sides, route analog and digital signals on opposite sides with a grounded plane between them.
Differential input operation depends on matched routing and a clean return path. Route the positive and negative members of each differential pair together, maintain consistent spacing, and minimize vias. Avoid sharing sensitive input nodes with high-current loads or digital return currents. For single-ended measurements, keep the source impedance and acquisition timing in view because the converter multiplexes multiple channels through a common input network.
Provide a stable supply within the specified 4.5 V to 5.5 V range and place the recommended bypass capacitor close to the supply pins. Reference accuracy directly affects conversion accuracy, so route the reference network separately from noisy digital returns and give it adequate local decoupling. Check startup, loading, and reference-source drive against the manufacturer specifications before using the converter for precision measurements.
Do not treat the MCP3304T-BI/SL and MCP3304T-AI/SL as functionally identical without checking operating-temperature and qualification requirements. The primary family distinction is the grade suffix. Also avoid assuming that every pin can be repurposed safely: use the manufacturer pin-description table for analog inputs, reference connections, power, ground, and SPI signals when assigning PCB nets.
合規資訊
The industrial MCP3304T-BI/SL is not identified as an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product descriptions.