Microchip Technology

MCP3304T-BI/SL - 13-Bit 4-Channel SPI ADC | Microchip

N.º da peça: MCP3304T-BI/SL ✓ Ativo
4.5 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MCP3304T-BI/SL Visão geral

The Microchip Technology MCP3304T-BI/SL is a 13-bit successive-approximation analog-to-digital converter with four differential or eight single-ended inputs, a 100 kHz sampling rate, and an SPI serial interface in a 16-pin SOIC package. Its 4.5 V to 5.5 V operating range makes it suitable for precision industrial, battery-powered, and remote data-acquisition systems.

An analog-to-digital converter is an integrated circuit that converts continuously varying analog voltages into numeric values for processing, measurement, or control. The MCP3304 belongs to the ADC, data-converter IC, and semiconductor hierarchy. Its multiplexed input structure supports measurement of several sensors or control signals through one converter, while the SPI interface connects it to a microcontroller or other digital controller.

The principal features are 13-bit resolution, four differential or eight single-ended input channels, a 100 kHz conversion rate, and low power consumption. Differential inputs are useful when the measured signal is referenced to another voltage or when common-mode noise must be rejected. Single-ended operation provides a practical choice for battery voltage, temperature-sensor, and resistive-divider measurements.

Internally, the converter uses a successive-approximation architecture. Each conversion resolves the input voltage through successive comparisons and transfers the resulting digital code through the serial interface. The 13-bit format provides 8,192 code levels, making the device suitable for measurement systems that need more resolution than a coarse 8-bit ADC without requiring the complexity and power of a higher-resolution converter.

Typical uses include remote sensor acquisition, battery-powered instrumentation, industrial process monitoring, portable measurement equipment, and embedded data loggers. The MCP3304 is especially appropriate when several analog channels must share a compact PCB area and communicate through a standard serial bus. Its low-power operating approach also benefits systems in which the duty cycle of active acquisition is limited.

When laying out the circuit, reserve the 16-pin SOIC footprint exactly as shown in the package drawing and confirm signal limits, reference-voltage requirements, and acquisition timing in the manufacturer datasheet. Place input and reference components close to their associated pins, maintain a clean return path, and account for digital-interface activity during analog conversion. Proper grounding and reference decoupling are especially important in systems combining low-level sensor signals with switching or wireless circuitry.

This product page consolidates the manufacturer device description, distributor identification, package details, and practical use-case guidance for engineers evaluating the MCP3304T-BI/SL. It also provides focused guidance for comparison, sourcing, layout, and drop-in replacement decisions without replacing the complete electrical characteristics and timing information in the Microchip datasheet.

Alternativas drop-in para MCP3304T-BI/SL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MCP3304T-BI/SL (mesmo formato e footprint) — diferindo em Input Configuration, Input Type, Package, Power Consumption, Sampling Rate.

Microchip Technology
Input Configuration: 4 single-ended or 2 differential inputs
Input Type: Fully differential
Package: 16-pin SOIC, 3.90 mm width

MCP3304T-AI/SL

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-pin SOIC
Automotive temperature grade replaces the industrial grade; resolution, channel count, supply range, sampling rate, package, and SPI interface remain the same.

📋 Alternativa de referência (fora do catálogo)

MCP3304T-BI/SL Classificações máximas e características elétricas

Converter Type 13-bit successive-approximation ADC
Input Configuration 4 differential or 8 single-ended inputs
Taxa de amostragem 100 kHz
Supply Voltage Range 4.5 V to 5.5 V
Digital Interface SPI serial interface
Input Type Differential and single-ended analog inputs
Resolução 13 bit
Number of ADC Channels 4 channels
Total Input Options 8 inputs
Encapsulamento 16-pin SOIC
Power Consumption Low-power operation
Conversion Architecture Successive approximation
Application Area Battery-powered systems and remote data acquisition
Manufacturer Microchip Technology

Guia de Configuração de Pinos do MCP3304T-BI/SL 16-pin soic

Configuração de pinos para MCP3304T-BI/SL (pacote 16-pin soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-pin soic para MCP3304T-BI/SL

Nenhum dado detalhado de pinagem disponível para MCP3304T-BI/SL.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MCP3304T-BI/SL é adequado para 6 aplicaçãos: Remote Sensor Data Acquisition, Battery-Powered Instrumentation, Industrial Process Monitoring, Temperature and Voltage Monitoring, Embedded Data Logger, Precision Control Input Module.

🌐

Remote Sensor Data Acquisition

The MCP3304T-BI/SL suits remote monitoring systems that must acquire several sensor signals through a compact, low-power interface. Four differential channels can measure bridge outputs or paired voltages with better rejection of common-mode disturbance, while the alternative single-ended configuration supports eight grounded inputs. The 100 kHz conversion capability provides margin for multiplexed measurements, and the SPI interface allows straightforward connection to a microcontroller. Microchip specifically identifies remote data acquisition and battery-powered operation as target use cases for the MCP3304 family.

⚡

Battery-Powered Instrumentation

The MCP3304T-BI/SL is appropriate for portable meters and battery-operated instruments that need more measurement resolution than a coarse 8-bit converter. Its 13-bit format represents the input range with 8,192 code levels, while four differential or eight single-ended inputs increase channel density without requiring one converter per signal. Low-power operation supports duty-cycled acquisition, and SPI transfers digital results efficiently to a low-power controller. The 4.5 V to 5.5 V operating range makes supply planning straightforward in regulated 5 V systems.

🏭

Industrial Process Monitoring

The MCP3304T-BI/SL can serve as the analog measurement front end in industrial monitoring equipment that tracks several process variables. Differential inputs are valuable for transducers with balanced outputs, while single-ended inputs can monitor relay-contact status, scaled sensor voltages, or resistive-divider networks. A 100 kHz successive-approximation converter is fast enough for many supervisory and logging tasks, and the 16-pin SOIC package simplifies assembly in conventional industrial-control hardware.

🌡️

Temperature and Voltage Monitoring

The MCP3304T-BI/SL can monitor thermistors, analog temperature sensors, supply rails, and other slowly changing voltages in embedded systems. Eight single-ended inputs reduce component count when several thresholds or operating parameters must be tracked. The 13-bit resolution provides finer quantization than an 8-bit converter, helping distinguish small changes in sensor voltage. Use a stable reference implementation and place the sensor or divider network near the input structure when long traces could introduce error.

🖥️

Embedded Data Logger

The MCP3304T-BI/SL fits compact embedded data loggers that periodically sample several analog channels and store the results through a microcontroller. Four differential channels support paired sensor inputs, while eight single-ended inputs expand channel count for mixed measurements. The 100 kHz conversion rate allows acquisition to proceed faster than most low-rate logging cycles, and SPI provides a defined serial path for transferring each conversion result. Low-power operation is advantageous when the logger spends most of its time between measurement intervals.

🔧

Precision Control Input Module

The MCP3304T-BI/SL can provide a precision measurement channel for control systems that need feedback from potentiometers, dividers, transducers, or external command interfaces. Differential operation is advantageous for signals with a midpoint reference or common-mode content, and 13-bit resolution supports more precise control decisions. The SPI interface allows sampled values to be read directly by a control microcontroller. Firmware should account for channel multiplexing, acquisition timing, and reference behavior when establishing control-loop timing.

What is the MCP3304T-BI/SL?
The MCP3304T-BI/SL is a 13-bit, four-channel successive-approximation ADC with an SPI interface, housed in a 16-pin SOIC package. According to the Microchip MCP3304 product page, it supports full differential inputs and low-power consumption for battery-powered systems and remote data-acquisition equipment. Each differential channel can be paired with a single-ended channel to provide eight single-ended inputs when the application does not require differential sensing.
How many inputs and channels does MCP3304T-BI/SL have?
The MCP3304T-BI/SL provides four ADC channels and supports either four differential inputs or eight single-ended inputs. DigiKey identifies the device as a 13-bit ADC with four differential or eight single-ended inputs, while Microchip describes its full differential-input architecture. Differential mode supports paired bipolar measurements, while single-ended mode is useful for ordinary sensors measured relative to ground.
What is the sampling rate of MCP3304T-BI/SL?
The MCP3304T-BI/SL has a maximum sampling rate of 100 kHz. The 100 kHz figure is also listed in the LCSC device identification alongside its 4.5 V to 5.5 V supply range, SPI interface, and SOIC-16 package. This rate allows it to acquire analog signals quickly enough for remote data acquisition, battery-powered sensing, and embedded industrial measurement.
What supply voltage does MCP3304T-BI/SL require?
The MCP3304T-BI/SL operates from a 4.5 V to 5.5 V supply. The LCSC technical identification explicitly identifies the 4.5 V to 5.5 V operating range. This places the device in a conventional 5 V analog and embedded systems environment, so the system should provide a regulated supply with suitable decoupling close to the power and ground pins.
Where can I download the MCP3304T-BI/SL datasheet PDF?
The official MCP3304T-BI/SL documentation begins with Microchip Technology's MCP3304 product page at https://www.microchip.com/en-us/product/MCP3304. That page is the authoritative starting point for the device datasheet, package drawing, and ordering information. Use the manufacturer document for complete electrical limits, timing, pin descriptions, reference requirements, and recommended application circuits before finalizing a PCB design.
Where can I find the MCP3304T-BI/SL pinout?
The MCP3304T-BI/SL pinout is defined by the 16-pin SOIC package drawing and pin-description table in Microchip's MCP3304 documentation. The manufacturer product page is available at https://www.microchip.com/en-us/product/MCP3304. Before assigning PCB nets, verify every physical pin number and function against the current datasheet because power, reference, analog-input, and SPI signals must be mapped to the correct package locations.
Can MCP3304T-BI/SL measure single-ended sensors?
Yes, the MCP3304T-BI/SL can measure single-ended sensors and supports eight single-ended inputs in addition to four differential inputs. This flexibility allows the converter to handle grounded voltage-divider outputs, temperature sensors, and other signals referenced to the analog ground in one device. Differential operation is generally preferable when sensor leads are long or the measured signal experiences common-mode interference.
What is the best drop-in replacement for MCP3304T-BI/SL?
The MCP3304T-AI/SL is the closest identified same-family drop-in candidate because it retains the MCP3304T 16-pin SOIC architecture and differs primarily in its automotive temperature grade. According to the manufacturer family naming structure, the lower-voltage industrial suffix BI versus automotive suffix AI is the primary distinction. Verify qualification, temperature limits, and operating parameters against the current datasheet before approving a replacement.
Is MCP3304T-AI/SL the same as MCP3304T-BI/SL?
The MCP3304T-AI/SL is not an identical part; it is the automotive-grade counterpart of the industrial MCP3304T-BI/SL. Both use the MCP3304T 16-pin SOIC architecture, making the AI/SL device a pin-compatible candidate when its temperature grade and technical ratings meet the application. The standard BI/SL version remains the appropriate choice when automotive qualification is unnecessary.
When should I choose MCP3304T-BI/SL over MCP3304T-AI/SL?
Choose MCP3304T-BI/SL when the design requires the industrial-grade MCP3304T configuration and does not need automotive qualification. Choose MCP3304T-AI/SL when extended automotive temperature performance and AEC-Q100 qualification are required. Both retain the same 16-pin SOIC architecture, 13-bit resolution, four-channel multiplexed input structure, 100 kHz sampling capability, and SPI interface.
Is MCP3304T-BI/SL suitable for battery-powered data acquisition?
Yes, the MCP3304T-BI/SL is specifically positioned for battery-powered systems and remote data-acquisition applications. Microchip identifies its low power consumption as a key feature, while the 13-bit resolution provides 8,192 numerical levels for sensor and voltage measurements. Low-power suitability must still be evaluated at the system level using the converter's specified operating modes and the acquisition duty cycle.
Where can I buy MCP3304T-BI/SL and check its lead time?
Use the Request a Quote form on this page to request MCP3304T-BI/SL availability, current lead time, and commercial terms. The form provides the appropriate XAIPART sourcing path without embedding a volatile price or stock claim. For design planning, identify the exact 16-pin SOIC ordering code MCP3304T-BI/SL and provide the required quantity and shipment destination with the request.
What is the price of MCP3304T-BI/SL?
Use the Request a Quote form on this page for the current MCP3304T-BI/SL price, quantity breaks, and stock position. Commercial pricing for this exact MPN can change with availability, volume, and market conditions, so a static figure should not be used for budgeting. The structured listing on this page supports the exact part number and can be included in the same quote request.
Is MCP3304T-BI/SL in stock?
Request current MCP3304T-BI/SL stock and lead time through the Request a Quote form on this page. Availability must be confirmed for the exact suffix and package rather than inferred from a broader family listing. Include your required quantity, schedule, and destination so the supplier can confirm the appropriate supply status and delivery plan.
What are the key specifications of MCP3304T-BI/SL that engineers should know?
The key specifications are 13-bit resolution, four differential or eight single-ended inputs, a 100 kHz sampling rate, a 4.5 V to 5.5 V supply range, SPI communication, and a 16-pin SOIC package. According to Microchip and distributor device descriptions, the MCP3304T-BI/SL also offers low-power operation for battery-powered systems and remote data acquisition. These parameters establish its core measurement, interface, and packaging capabilities.

Dados de referência de engenharia para MCP3304T-BI/SL — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MCP3304T-BI/SL for compact 13-bit acquisition in industrial, battery-powered, or remote data-acquisition systems that require four differential or eight single-ended inputs and a 100 kHz sampling rate. Its 16-pin SOIC package and SPI interface make it practical for designs already using a 5 V embedded control environment. Choose the MCP3304T-AI/SL when the same electrical and pin configuration is needed with an automotive temperature grade and automotive qualification. Do not choose either part solely on package match when the required input voltage, reference source, acquisition timing, or absolute temperature limits differ. For designs needing more resolution, more channels, or a different input topology, review the complete MCP3304 family datasheet and consider a converter with the required measurement range rather than assuming a footprint-compatible part will preserve system performance.

Comparação com alternativas

Parâmetro Este produto MCP3304T-AI/SL
Brand Microchip Technology Microchip Technology
Package 16-pin SOIC 16-pin SOIC
Resolution 13 bit 13 bit
ADC Channels 4 channels 4 channels
Input Configuration 4 differential or 8 single-ended inputs 4 differential or 8 single-ended inputs
Sampling Rate 100 kHz 100 kHz
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V
Interface SPI serial interface SPI serial interface
Temperature Grade Industrial grade Automotive grade

Principais diferenciais

  • Four-channel density with differential or single-ended operation (vs MCP3304T-AI/SL)
  • 100 kHz multiplexed sampling performance (vs MCP3304T-AI/SL)
  • Industrial configuration for non-automotive equipment (vs MCP3304T-AI/SL)

Notas de projeto

Use the manufacturer 16-pin SOIC land pattern and verify the PCB pin numbering against the current package drawing before routing. Place input, reference, and supply bypass components close to their associated device pins. Sensitive analog traces should remain short and isolated from SPI clock and digital return paths; if the PCB supports both sides, route analog and digital signals on opposite sides with a grounded plane between them.

Differential input operation depends on matched routing and a clean return path. Route the positive and negative members of each differential pair together, maintain consistent spacing, and minimize vias. Avoid sharing sensitive input nodes with high-current loads or digital return currents. For single-ended measurements, keep the source impedance and acquisition timing in view because the converter multiplexes multiple channels through a common input network.

Provide a stable supply within the specified 4.5 V to 5.5 V range and place the recommended bypass capacitor close to the supply pins. Reference accuracy directly affects conversion accuracy, so route the reference network separately from noisy digital returns and give it adequate local decoupling. Check startup, loading, and reference-source drive against the manufacturer specifications before using the converter for precision measurements.

Do not treat the MCP3304T-BI/SL and MCP3304T-AI/SL as functionally identical without checking operating-temperature and qualification requirements. The primary family distinction is the grade suffix. Also avoid assuming that every pin can be repurposed safely: use the manufacturer pin-description table for analog inputs, reference connections, power, ground, and SPI signals when assigning PCB nets.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The industrial MCP3304T-BI/SL is not identified as an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product descriptions.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MCP3304T-BI/SL datasheet MCP3304T-BI/SL pinout MCP3304T-BI/SL datasheet pdf MCP3304T-BI/SL equivalent MCP3304T-BI/SL replacement MCP3304T-BI/SL price MCP3304T-BI/SL stock Microchip MCP3304T-BI/SL MCP3304T 13-bit ADC MCP3304T SOIC-16 pinout MCP3304T SPI ADC application circuit MCP3304T-BI/SL vs MCP3304T-AI/SL MCP3304 4 differential 8 single-ended MCP3304 100 kHz ADC MCP3304T-BI/SL remote data acquisition

Componentes & termos relacionados

Microchip Technology MCP3304T-BI/SL MCP3304T-AI/SL MCP3304 analog-to-digital converter ADC successive-approximation ADC data-converter IC semiconductor SPI 13-bit resolution 4 differential inputs 8 single-ended inputs 100 kHz sampling rate 4.5 V to 5.5 V supply 16-pin SOIC SOIC package family surface-mount package remote data acquisition battery-powered systems industrial process monitoring low-power operation input multiplexer common-mode rejection
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ