Microchip Technology

MCP3426A2-E/MS - 16-Bit Dual-Channel Sigma-Delta ADC

MPN: MCP3426A2-E/MS ✓ 啟用中
2.048 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3426A2-E/MS 概覽

The Microchip Technology MCP3426A2-E/MS is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-MSOP package. It uses an onboard precision 2.048 V reference to provide a differential input range of ±2.048 V. The converter is designed for low-noise, high-accuracy measurement of relatively slow analog signals.

An ADC converts continuous analog voltage into a numerical value for processing, storage, or control. The MCP3426 belongs to the sigma-delta ADC category, where an internal modulator and digital filter shape the conversion process to provide strong noise rejection and high resolution without requiring a high-speed flash converter. Within the component hierarchy, it is a data-converter IC, an ADC, and a power-management-compatible peripheral for precision measurement systems.

The MCP3426 combines two differential input channels, 16-bit resolution, and a factory-programmed I2C address in a compact 8-MSOP package. Differential inputs help reject common-mode disturbance when the measured voltage is small relative to the reference or supply level. The 2.048 V precision reference establishes the conversion scale, while the dual-channel architecture supports measurements from two sensors without changing converter hardware.

Its sigma-delta architecture is most effective with low-frequency or slowly changing signals because the conversion rate is limited to 15 samples per second. Digital filtering suppresses broadband noise but requires suitable sampling and settling behavior in the acquisition chain. The converter resolves its programmed gain, reference, and conversion settings through an I2C-compatible interface, allowing firmware to configure measurement channels and retrieve conversion results.

Typical uses include battery-powered environmental monitoring, industrial pressure and temperature acquisition, laboratory instrumentation, and low-speed sensor interfaces. Two differential channels are useful when both the sensor output and its return or reference signal must be measured accurately. The part is also appropriate for portable equipment where low conversion speed is acceptable but resolution and noise performance are more important than high throughput.

PCB design should place input filtering and reference-decoupling components close to the associated pins, while keeping sensitive analog traces away from digital switching nodes. Differential routing should be compact and symmetric where practical. Designers should confirm the actual input range, gain configuration, acquisition timing, and absolute maximum conditions in the manufacturer datasheet before setting the analog front end.

This page combines the core MCP3426 electrical characteristics, verified package information, same-footprint address-option alternatives, application guidance, and design considerations into a procurement-oriented engineering reference. It also distinguishes true drop-in options from cross-package converters so that footprint and firmware changes are considered before redesign.

直接替換替代品,適用於 MCP3426A2-E/MS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MCP3426A2-E/MS (相同外形與佔位) — 差異在於 Differential Input Range, Package, Input Channels, Maximum Conversion Rate, Input Configuration.

Microchip Technology
Package: 8-pin MSOP
Maximum Conversion Rate: 15 SPS
Microchip Technology
Differential Input Range: ±2.048 V differential
Package: 8-pin MSOP
Input Channels: 2 differential inputs
Microchip Technology
Maximum Conversion Rate: 15 samples/s

MCP3426A0-E/MS

✅ 直接替換
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · 2 differential inputs · 1-channel sigma-delta conversion per differential input · 15 SPS · 2.048 V · ±2.048 V · I2C

聯絡詢價

查看資料表 →

MCP3426A1-E/MS

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 8-MSOP
16 bit · 2 differential inputs · Delta-sigma sigma-delta ADC · 15 SPS · 2.7 V to 5.5 V · 2.048 V · ±2.048 V differential · 8-pin MSOP

聯絡詢價

查看資料表 →

MCP3426A3-E/MS

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-MSOP
Factory-programmed I2C address index differs by 1 position from A2; conversion function and 8-MSOP footprint remain the same

📋 參考替代品(不在目錄中)

MCP3426A4-E/MS

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · 1-channel delta-sigma ADC · 15 samples/s · 2 differential-capable analog inputs · 2.048 V · ±2.048 V · 2.7 V

聯絡詢價

查看資料表 →

MCP3426A5-E/MS

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-MSOP
Factory-programmed I2C address index differs by 3 positions from A2; conversion function and 8-MSOP footprint remain the same

📋 參考替代品(不在目錄中)

MCP3426A2-E/MS 最大額定值與電氣特性

ADC Type Sigma-delta ADC
解析度 16 bit
Input Channels 2 channels
Input Configuration Differential
Conversion Rate 15 samples per second
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
介面 I2C
I2C Address Factory programmed; A2 address option
封裝 8-MSOP
安裝類型 Surface mount

MCP3426A2-E/MS 8-msop 腳位配置指南

MCP3426A2-E/MS(8-msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MCP3426A2-E/MS 的 8-msop 封裝腳位圖

無詳細腳位定義資料: MCP3426A2-E/MS.

請參閱 資料表 以查看完整腳位配置。

典型應用

MCP3426A2-E/MS 適用於 6 應用s: Battery-Powered Environmental Sensors, Industrial Pressure and Level Measurement, Precision Laboratory Instrumentation, Portable Medical Monitoring, Smart Home and IoT Sensor Nodes, Process Control and Data Logging.

🧩

Battery-Powered Environmental Sensors

The MCP3426A2-E/MS fits environmental sensing nodes that monitor slow temperature, humidity, or gas-sensor signals while prioritizing resolution over conversion speed. Its 16-bit resolution, differential inputs, and precision 2.048 V reference help preserve small signal detail, while the 15-sample-per-second rate is appropriate for changing environmental conditions rather than transient waveforms. The device can sit behind sensor-specific filtering and protection, with its I2C interface sharing a bus with a low-power microcontroller. Battery budgeting should include converter operation, pull-up resistors, sensor excitation, and periodic wake-up activity, since the ADC's own low-speed conversion capability does not determine total system consumption.

🏭

Industrial Pressure and Level Measurement

The MCP3426A2-E/MS is suitable for industrial pressure, level, or force sensing when the bridge or transducer output changes slowly and common-mode interference is present. Differential inputs permit the converter to measure the difference between the sensor signal and its return rather than relying on a single-ended ground-referenced voltage. The 16-bit conversion resolution and 2.048 V onboard reference support precise readings, while the 15-sample-per-second rate supports continuous industrial monitoring rather than high-speed vibration analysis. Protective filtering, shielding, grounding, and calibration become important near motors, contactors, and switching supplies. Firmware should also compensate for offset, gain, and temperature-dependent sensor drift.

🔧

Precision Laboratory Instrumentation

The MCP3426A2-E/MS can support laboratory instruments that monitor slow analog quantities such as thermistor bridges, potentiometer positions, or low-level detector outputs. Its 16-bit resolution provides fine numerical spacing, and the differential architecture helps reject common-mode voltage when the measurement is referenced to a shared return. The precision 2.048 V internal reference reduces external reference complexity, and the dual-channel arrangement allows two related measurements to be acquired with one converter. At 15 samples per second, the device is appropriate for panel meters, data loggers, and calibration equipment. Stable reference behavior, low-noise analog routing, shielding, and careful grounding are more important here than maximum conversion throughput.

💊

Portable Medical Monitoring

The MCP3426A2-E/MS can serve as the measurement converter in portable medical equipment that acquires slowly varying sensor signals, such as pressure, temperature, or optical detector outputs. Differential inputs help preserve weak signals in the presence of common-mode voltage, while 16-bit resolution supports detailed numerical representation. The 15-sample-per-second rate is suitable for continuous physiological or process monitoring but not high-bandwidth signal capture. Medical designs must assess isolation, leakage, patient protection, calibration, and applicable regulatory requirements separately from the ADC's electrical performance. A low-power controller such as an ATtiny or STM8 can manage configuration, acquisition timing, and data transfer while the converter handles analog digitization.

📱

Smart Home and IoT Sensor Nodes

The MCP3426A2-E/MS is appropriate for IoT nodes that digitize an analog environmental or occupancy-related sensor before transmitting measurements over a digital network. Its dual-channel architecture permits two differential measurements, and the I2C interface integrates cleanly with a sensor-hub microcontroller. The 15-sample-per-second throughput is generally adequate for slowly changing environmental variables while keeping the converter focused on resolution and noise performance. In a compact wireless node, power consumption should be evaluated across wake-up cycles, bus pull-ups, sensor excitation, radio transmission, and regulator efficiency. A common reference and well-controlled ground plane help ensure that analog measurements remain repeatable across multiple wireless nodes.

🖥️

Process Control and Data Logging

The MCP3426A2-E/MS can digitize slow process variables in industrial controls, test fixtures, and data loggers where the priority is repeatable measurement rather than rapid sampling. Two differential channels allow a controller to compare a sensor output with a reference, monitor two transducers, or track a bridge alongside another slow input. The 16-bit resolution and ±2.048 V differential range suit low-level analog signals, while the factory-programmed A2 address helps simplify bus planning when that address is already allocated correctly. Firmware should implement calibration, outlier rejection, filtering, and sensor warm-up delays. Layout should keep the analog section away from switching nodes and provide a stable, low-impedance ground reference.

推薦產品摘要

ATTINY44A-MUR Microchip Technology 用於: Battery-Powered Environmental Sensors ATMEGA88A-CCU Microchip Technology 用於: Battery-Powered Environmental Sensors MCP3426A2T-E/MS Same-family converter option with alternate ordering configuration 用於: Battery-Powered Environmental Sensors, Precision Laboratory Instrumentation STM8S103F3P3TR STMicroelectronics 用於: Industrial Pressure and Level Measurement STM32G031G6U6NTR General-purpose MCU for processing differential sensor measurements 用於: Industrial Pressure and Level Measurement MCP3426A6T-E/MC Higher-resolution MCP3426 family option for related measurement designs 用於: Industrial Pressure and Level Measurement STM32G071CBT6TR Microcontroller for instrument control, calibration, and data logging 用於: Precision Laboratory Instrumentation EFM32ZG110F4U32TR Low-power MCU for portable measurement instruments 用於: Precision Laboratory Instrumentation ATMEGA64A-ANR Microchip Technology 用於: Portable Medical Monitoring STM8S103F3M6TR STMicroelectronics 用於: Portable Medical Monitoring MCP3426A0-E/MS Microchip Technology 用於: Portable Medical Monitoring STM8L152K6U6TR STMicroelectronics 用於: Smart Home and IoT Sensor Nodes MSP430F133IPMR Texas Instruments 用於: Smart Home and IoT Sensor Nodes MCP3426A3-E/MS Same-package address option for resolving I2C conflicts 用於: Smart Home and IoT Sensor Nodes STM32G431C8T6TR STMicroelectronics 用於: Process Control and Data Logging EFM32ZG222F8-B-QFP48R Silicon Labs 用於: Process Control and Data Logging MCP3426A4-E/MS Microchip Technology 用於: Process Control and Data Logging
What are the key specifications of MCP3426A2-E/MS that engineers should know?
The MCP3426A2-E/MS is a 16-bit, dual-channel sigma-delta ADC with differential inputs, a 15-sample-per-second conversion rate, and an 8-MSOP package. According to the Microchip MCP3426 product page and datasheet, it includes a precision 2.048 V onboard reference and supports a differential input range of ±2.048 V. The A2 designation identifies the factory-programmed I2C address option. These characteristics make the device suitable for precise, low-speed measurements rather than high-speed waveform acquisition.
Where can I download the MCP3426A2-E/MS datasheet PDF?
The official MCP3426A2-E/MS documentation is available from the Microchip Technology MCP3426 product page, which links to the manufacturer datasheet and supporting documents. The device is documented as a two-channel, differential-input sigma-delta ADC with up to 16-bit resolution, a precision 2.048 V reference, and operation from 2.7 V to 5.5 V. Use the manufacturer datasheet for the complete pin description, electrical limits, timing diagrams, and acquisition sequence.
Where can I find the MCP3426A2-E/MS pinout?
The MCP3426A2-E/MS pinout is shown in the manufacturer datasheet under the package and pin-description information for the 8-MSOP device. The package drawing identifies all eight physical pins and their electrical functions. For implementation, follow that pin-description table when assigning analog inputs, ground, supply, and I2C signals. The package uses a compact MSOP footprint, so verify land-pattern dimensions and solder-paste compatibility against the latest mechanical drawing before releasing a PCB layout.
Is MCP3426A2-E/MS suitable for low-speed sensor measurement?
Yes, the MCP3426A2-E/MS is suitable for low-speed sensor measurement when the sensed signal changes slowly enough for the 15-sample-per-second converter. Its 16-bit resolution, differential inputs, and 2.048 V precision reference provide a useful foundation for pressure, temperature, chemical, and position sensors. The principal trade-off is throughput: the sigma-delta conversion process favors noise rejection and resolution rather than rapid sampling of high-frequency signals.
What can replace MCP3426A2-E/MS without changing the 8-MSOP footprint?
The closest drop-in options are the MCP3426A0-E/MS, MCP3426A1-E/MS, MCP3426A3-E/MS, MCP3426A4-E/MS, and MCP3426A5-E/MS family variants. They use the same 8-MSOP package and the same basic 16-bit dual-channel conversion function, but their factory-programmed I2C address differs. According to the Microchip MCP3426 family documentation, replacement therefore requires changing the device address in firmware and confirming that the new address does not conflict with another bus participant.
Is MCP3426A2-E/MS the same as MCP3426A2T-E/MS?
No, MCP3426A2-E/MS and MCP3426A2T-E/MS should not be treated as identical ordering codes without checking the manufacturer ordering guide. Both are associated with the MCP3426A2 electrical variant and the 8-MSOP package family, but the ordering suffix can denote a different reel or tape-and-reel configuration. The electrical function and I2C address may remain equivalent, while the physical packing method can affect PCB assembly and handling. Confirm the exact ordering code before treating either suffix as a substitute.
MCP3426A2-E/MS vs MCP3426A0-E/MS — which should I choose?
Choose MCP3426A2-E/MS when the MCU firmware expects the A2 factory-programmed I2C address, and choose MCP3426A0-E/MS when that address is required instead. According to the Microchip MCP3426 family documentation, both use the same 8-MSOP package and implement the same two-channel, 16-bit differential conversion function. The meaningful difference is the factory-programmed address, so hardware interchangeability is high but firmware and bus-address planning are required.
MCP3426A2-E/MS vs MCP3426A1-E/MS — which is better for an I2C sensor board?
MCP3426A2-E/MS is preferable when the existing sensor board expects the A2 address and MCP3426A1-E/MS is preferable when the A1 address avoids a conflict on the I2C bus. The MCP3426 family documentation identifies both as the same 8-MSOP dual-channel converter family, and the conversion characteristics remain equivalent for the address variants. The decision is therefore based primarily on bus addressing, existing firmware, and whether another sensor or peripheral already occupies the desired address.
When should I choose MCP3426A2-E/MS over another MCP3426 address option?
Choose MCP3426A2-E/MS when its factory-programmed I2C address matches the sensor board firmware or an address that is unused on the bus. Because the A0, A1, A3, A4, and A5 options provide alternate addresses in the same footprint and converter family, they can simplify a PCB redesign when an address conflict exists. According to the Microchip MCP3426 documentation, the electrical conversion function is retained, so address selection should be coordinated with firmware and the final bus map.
Is there a cross-brand drop-in equivalent for MCP3426A2-E/MS?
No cross-brand pin-compatible replacement has been established for MCP3426A2-E/MS. The closest documented alternatives are the same-family Microchip MCP3426 address variants, all using the 8-MSOP package and retaining the core dual-channel sigma-delta conversion function. A converter selected only because it has a similar resolution is not automatically a drop-in replacement because the pin assignment, I2C address, acquisition timing, reference implementation, and firmware register map must all be verified.
Where can I buy MCP3426A2-E/MS online?
Use the Request a Quote form on this page to request MCP3426A2-E/MS availability, lead time, and ordering support. The exact MPN is a 16-bit, dual-channel sigma-delta ADC in an 8-MSOP package, so quote requests should include the desired package form, quantity, and target date. Microchip's MCP3426 family documentation identifies the converter's precision 2.048 V reference and differential architecture, which can help confirm that the requested device matches the intended design.
What is the price of MCP3426A2-E/MS?
Use the Request a Quote form on this page for the current MCP3426A2-E/MS unit price and quantity-break availability. The submitted quote should identify the exact MCP3426A2-E/MS ordering code, package form, quantity, and required delivery date. For design context, Microchip documents this part as a 16-bit, dual-channel sigma-delta ADC with differential inputs and a 2.048 V reference; those characteristics distinguish it from other low-resolution converters in the same package.
What is the lead time and stock status for MCP3426A2-E/MS?
Request the current lead time, stock status, and minimum order quantity through the Request a Quote form on this page. Quote requests should include the MCP3426A2-E/MS suffix exactly, the required reel or tape format, annual usage, and target production date. The part's manufacturer documentation identifies it as an active member of the MCP3426 family of two-channel, 16-bit, differential sigma-delta converters.
Is MCP3426A2-E/MS in stock for prototype and production builds?
Current MCP3426A2-E/MS stock should be confirmed through the Request a Quote form on this page. Include prototype quantity separately from production volume, along with the required package and tape-and-reel format, because quantity and assembly packaging affect planning. For engineering verification, confirm that the quoted device is the A2 address variant of the 8-MSOP, 16-bit, dual-channel sigma-delta ADC described by Microchip.
How much power does MCP3426A2-E/MS need in a sensor design?
MCP3426A2-E/MS operates from a 2.7 V to 5.5 V supply, so the first design step is to choose a rail compatible with both the converter and the attached sensor. The manufacturer datasheet contains the supply-current and conversion-energy figures needed for a complete power budget. In portable systems, include the sensor, pull-up resistors, interface activity, and any reference or analog-front-end current rather than assessing the ADC in isolation.
Does MCP3426A2-E/MS need an external voltage reference?
No, the MCP3426A2-E/MS includes a precision 2.048 V onboard reference, which provides the documented ±2.048 V differential input range. According to the Microchip MCP3426 product page, this on-chip reference simplifies the analog front end by removing the need for an external precision reference in basic measurements. Input filtering, gain selection, common-mode limits, and protection still require design attention because reference accuracy alone does not determine total measurement error.

工程參考資料,適用於 MCP3426A2-E/MS — 比較、設計指引及合規資訊。

選型指南

Choose MCP3426A2-E/MS when the board requires a 16-bit, dual-channel sigma-delta ADC with differential inputs, a precision 2.048 V reference, and the A2 factory-programmed I2C address. Choose MCP3426A0-E/MS or MCP3426A1-E/MS when the bus map requires a lower address option; choose A3, A4, or A5 when a higher address option avoids a conflict. These variants retain the same 8-MSOP footprint and core conversion function, but firmware must use the corresponding address. This converter is best for slow sensors, laboratory instrumentation, and process monitoring. Choose a higher-speed or higher-resolution converter only when the application cannot operate at 15 samples per second or requires more than 16-bit resolution.

與替代品比較

參數 本產品 MCP3426A0-E/MS MCP3426A1-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A5-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Rate 15 samples per second 15 samples per second 15 samples per second 15 samples per second 15 samples per second 15 samples per second
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
I2C Address Option A2 A0 A1 A3 A4 A5

主要差異化特點

  • Same-footprint address options simplify I2C bus redesign (對比MCP3426A0-E/MS)
  • High resolution for slow differential sensor signals (對比MCP3426A1-E/MS)
  • Two differential inputs in a compact 8-MSOP package (對比MCP3426A3-E/MS)

設計說明

Route the differential input pair as a compact, symmetrical pair and connect input filtering close to the ADC pins. Keep the analog section physically separated from digital clocks, I2C switching, inductors, and power-converter nodes. A continuous ground plane beneath the analog section helps establish a low-impedance return path, while minimizing input-loop area reduces susceptibility to coupled noise.

Place input, reference, and bypass capacitors on the same side of the PCB as the MCP3426A2-E/MS and connect them using the shortest practical traces. Follow the manufacturer datasheet for capacitor value, tolerance, dielectric, and placement. Do not substitute the internal 2.048 V reference with an external source unless the converter configuration and schematic are intentionally revised, because reference routing and stability assumptions would also change.

Treat the I2C bus as a digital signal that can inject noise into a sensitive analog measurement. Keep pull-up resistors close to the bus master, use the slowest practical clock rate, and avoid routing the bus beneath or immediately beside analog inputs. When replacing MCP3426A2-E/MS with an address-option variant, update firmware for the new I2C address and verify that the address does not collide with another device.

Do not select this converter for high-frequency waveform acquisition: its 15-sample-per-second rate is optimized for slow analog signals. Also distinguish the electrical address option from the physical ordering suffix. MCP3426A2T-E/MS may use a different reel or tape-and-reel ordering configuration even when its electrical characteristics are equivalent, so the complete ordering code must be confirmed before substitution or PCB assembly.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status must be confirmed for the exact ordering code using Microchip's current product declarations and material-declaration documentation.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MCP3426A2-E/MS datasheet MCP3426A2-E/MS pinout MCP3426A2-E/MS datasheet pdf MCP3426A2-E/MS equivalent MCP3426A2-E/MS replacement MCP3426A2-E/MS cross reference MCP3426A2-E/MS vs MCP3426A0-E/MS MCP3426A2-E/MS footprint MCP3426A2-E/MS application circuit MCP3426A2-E/MS price MCP3426A2-E/MS stock Microchip MCP3426A2-E/MS ADC

相關元件與詞彙

Microchip Technology MCP3426A2-E/MS MCP3426A0-E/MS MCP3426A1-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A5-E/MS ADC analog-to-digital converter sigma-delta ADC delta-sigma converter data-converter IC semiconductor differential input 16-bit resolution 2.048 V precision reference 15 samples per second I2C factory-programmed I2C address 8-MSOP MSOP package family surface-mount package RoHS REACH sensor measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情