MCP3426A2-E/MS - 16-Bit Dual-Channel Sigma-Delta ADC
N.º da peça: MCP3426A2-E/MS ✓ AtivoMCP3426A2-E/MS Visão geral
An ADC converts continuous analog voltage into a numerical value for processing, storage, or control. The MCP3426 belongs to the sigma-delta ADC category, where an internal modulator and digital filter shape the conversion process to provide strong noise rejection and high resolution without requiring a high-speed flash converter. Within the component hierarchy, it is a data-converter IC, an ADC, and a power-management-compatible peripheral for precision measurement systems.
The MCP3426 combines two differential input channels, 16-bit resolution, and a factory-programmed I2C address in a compact 8-MSOP package. Differential inputs help reject common-mode disturbance when the measured voltage is small relative to the reference or supply level. The 2.048 V precision reference establishes the conversion scale, while the dual-channel architecture supports measurements from two sensors without changing converter hardware.
Its sigma-delta architecture is most effective with low-frequency or slowly changing signals because the conversion rate is limited to 15 samples per second. Digital filtering suppresses broadband noise but requires suitable sampling and settling behavior in the acquisition chain. The converter resolves its programmed gain, reference, and conversion settings through an I2C-compatible interface, allowing firmware to configure measurement channels and retrieve conversion results.
Typical uses include battery-powered environmental monitoring, industrial pressure and temperature acquisition, laboratory instrumentation, and low-speed sensor interfaces. Two differential channels are useful when both the sensor output and its return or reference signal must be measured accurately. The part is also appropriate for portable equipment where low conversion speed is acceptable but resolution and noise performance are more important than high throughput.
PCB design should place input filtering and reference-decoupling components close to the associated pins, while keeping sensitive analog traces away from digital switching nodes. Differential routing should be compact and symmetric where practical. Designers should confirm the actual input range, gain configuration, acquisition timing, and absolute maximum conditions in the manufacturer datasheet before setting the analog front end.
This page combines the core MCP3426 electrical characteristics, verified package information, same-footprint address-option alternatives, application guidance, and design considerations into a procurement-oriented engineering reference. It also distinguishes true drop-in options from cross-package converters so that footprint and firmware changes are considered before redesign.
Alternativas drop-in para MCP3426A2-E/MS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCP3426A2-E/MS (mesmo formato e footprint) — diferindo em Differential Input Range, Package, Input Channels, Maximum Conversion Rate, Input Configuration.
MCP3426A0-E/MS
✅ Drop-InConsulte o preço
Ver ficha técnica →MCP3426A1-E/MS
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MCP3426A3-E/MS
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP3426A4-E/MS
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MCP3426A5-E/MS
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP3426A2-E/MS Classificações máximas e características elétricas
| ADC Type | Sigma-delta ADC |
| Resolução | 16 bit |
| Input Channels | 2 channels |
| Input Configuration | Differential |
| Conversion Rate | 15 samples per second |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Interface | I2C |
| I2C Address | Factory programmed; A2 address option |
| Encapsulamento | 8-MSOP |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do MCP3426A2-E/MS 8-msop
Configuração de pinos para MCP3426A2-E/MS (pacote 8-msop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MCP3426A2-E/MS.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCP3426A2-E/MS é adequado para 6 aplicaçãos: Battery-Powered Environmental Sensors, Industrial Pressure and Level Measurement, Precision Laboratory Instrumentation, Portable Medical Monitoring, Smart Home and IoT Sensor Nodes, Process Control and Data Logging.
Battery-Powered Environmental Sensors
The MCP3426A2-E/MS fits environmental sensing nodes that monitor slow temperature, humidity, or gas-sensor signals while prioritizing resolution over conversion speed. Its 16-bit resolution, differential inputs, and precision 2.048 V reference help preserve small signal detail, while the 15-sample-per-second rate is appropriate for changing environmental conditions rather than transient waveforms. The device can sit behind sensor-specific filtering and protection, with its I2C interface sharing a bus with a low-power microcontroller. Battery budgeting should include converter operation, pull-up resistors, sensor excitation, and periodic wake-up activity, since the ADC's own low-speed conversion capability does not determine total system consumption.
Recomendado
Industrial Pressure and Level Measurement
The MCP3426A2-E/MS is suitable for industrial pressure, level, or force sensing when the bridge or transducer output changes slowly and common-mode interference is present. Differential inputs permit the converter to measure the difference between the sensor signal and its return rather than relying on a single-ended ground-referenced voltage. The 16-bit conversion resolution and 2.048 V onboard reference support precise readings, while the 15-sample-per-second rate supports continuous industrial monitoring rather than high-speed vibration analysis. Protective filtering, shielding, grounding, and calibration become important near motors, contactors, and switching supplies. Firmware should also compensate for offset, gain, and temperature-dependent sensor drift.
Recomendado
Precision Laboratory Instrumentation
The MCP3426A2-E/MS can support laboratory instruments that monitor slow analog quantities such as thermistor bridges, potentiometer positions, or low-level detector outputs. Its 16-bit resolution provides fine numerical spacing, and the differential architecture helps reject common-mode voltage when the measurement is referenced to a shared return. The precision 2.048 V internal reference reduces external reference complexity, and the dual-channel arrangement allows two related measurements to be acquired with one converter. At 15 samples per second, the device is appropriate for panel meters, data loggers, and calibration equipment. Stable reference behavior, low-noise analog routing, shielding, and careful grounding are more important here than maximum conversion throughput.
Recomendado
Portable Medical Monitoring
The MCP3426A2-E/MS can serve as the measurement converter in portable medical equipment that acquires slowly varying sensor signals, such as pressure, temperature, or optical detector outputs. Differential inputs help preserve weak signals in the presence of common-mode voltage, while 16-bit resolution supports detailed numerical representation. The 15-sample-per-second rate is suitable for continuous physiological or process monitoring but not high-bandwidth signal capture. Medical designs must assess isolation, leakage, patient protection, calibration, and applicable regulatory requirements separately from the ADC's electrical performance. A low-power controller such as an ATtiny or STM8 can manage configuration, acquisition timing, and data transfer while the converter handles analog digitization.
Recomendado
Smart Home and IoT Sensor Nodes
The MCP3426A2-E/MS is appropriate for IoT nodes that digitize an analog environmental or occupancy-related sensor before transmitting measurements over a digital network. Its dual-channel architecture permits two differential measurements, and the I2C interface integrates cleanly with a sensor-hub microcontroller. The 15-sample-per-second throughput is generally adequate for slowly changing environmental variables while keeping the converter focused on resolution and noise performance. In a compact wireless node, power consumption should be evaluated across wake-up cycles, bus pull-ups, sensor excitation, radio transmission, and regulator efficiency. A common reference and well-controlled ground plane help ensure that analog measurements remain repeatable across multiple wireless nodes.
Recomendado
Process Control and Data Logging
The MCP3426A2-E/MS can digitize slow process variables in industrial controls, test fixtures, and data loggers where the priority is repeatable measurement rather than rapid sampling. Two differential channels allow a controller to compare a sensor output with a reference, monitor two transducers, or track a bridge alongside another slow input. The 16-bit resolution and ±2.048 V differential range suit low-level analog signals, while the factory-programmed A2 address helps simplify bus planning when that address is already allocated correctly. Firmware should implement calibration, outlier rejection, filtering, and sensor warm-up delays. Layout should keep the analog section away from switching nodes and provide a stable, low-impedance ground reference.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP3426A2-E/MS — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP3426A0-E/MS | MCP3426A1-E/MS | MCP3426A3-E/MS | MCP3426A4-E/MS | MCP3426A5-E/MS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Conversion Rate | 15 samples per second | 15 samples per second | 15 samples per second | 15 samples per second | 15 samples per second | 15 samples per second |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| I2C Address Option | A2 | A0 | A1 | A3 | A4 | A5 |
Principais diferenciais
- Same-footprint address options simplify I2C bus redesign (vs MCP3426A0-E/MS)
- High resolution for slow differential sensor signals (vs MCP3426A1-E/MS)
- Two differential inputs in a compact 8-MSOP package (vs MCP3426A3-E/MS)
Notas de projeto
Route the differential input pair as a compact, symmetrical pair and connect input filtering close to the ADC pins. Keep the analog section physically separated from digital clocks, I2C switching, inductors, and power-converter nodes. A continuous ground plane beneath the analog section helps establish a low-impedance return path, while minimizing input-loop area reduces susceptibility to coupled noise.
Place input, reference, and bypass capacitors on the same side of the PCB as the MCP3426A2-E/MS and connect them using the shortest practical traces. Follow the manufacturer datasheet for capacitor value, tolerance, dielectric, and placement. Do not substitute the internal 2.048 V reference with an external source unless the converter configuration and schematic are intentionally revised, because reference routing and stability assumptions would also change.
Treat the I2C bus as a digital signal that can inject noise into a sensitive analog measurement. Keep pull-up resistors close to the bus master, use the slowest practical clock rate, and avoid routing the bus beneath or immediately beside analog inputs. When replacing MCP3426A2-E/MS with an address-option variant, update firmware for the new I2C address and verify that the address does not collide with another device.
Do not select this converter for high-frequency waveform acquisition: its 15-sample-per-second rate is optimized for slow analog signals. Also distinguish the electrical address option from the physical ordering suffix. MCP3426A2T-E/MS may use a different reel or tape-and-reel ordering configuration even when its electrical characteristics are equivalent, so the complete ordering code must be confirmed before substitution or PCB assembly.
Informações de conformidade
Compliance status must be confirmed for the exact ordering code using Microchip's current product declarations and material-declaration documentation.