MCP3426A3-E/SN - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A3-E/SN ✗ 停產MCP3426A3-E/SN 概覽
An ADC is a data-converter IC that transforms an analog voltage into a digital value for processing, measurement, or communication. The MCP3426 belongs to the sigma-delta ADC family, where internal oversampling and digital filtering are used to obtain high resolution. In the system hierarchy, it is an analog-to-digital converter, then a data-converter IC, and finally a semiconductor used to connect analog sensors to digital control or data-acquisition systems.
The primary features are 16-bit resolution, two analog inputs, a 15 samples-per-second conversion rate, and an 8-pin SOIC package. The dual-input format reduces the need for a separate converter when a system must monitor two related quantities. The relatively deliberate sampling rate is appropriate for slow-changing process, environmental, and sensor signals rather than high-frequency waveform acquisition.
The sigma-delta architecture is suited to precision dc measurements because digital filtering helps suppress out-of-band noise and averages successive conversions. The usable common-mode range, input bias behavior, internal reference accuracy, and noise performance must be checked against the exact manufacturer datasheet before defining the analog front end. A3 identifies the converter gain configuration, which determines the input scaling for the application.
Typical uses include battery-powered environmental sensing, industrial pressure and temperature monitoring, laboratory instrument inputs, and low-speed data acquisition. In each case, the MCP3426A3-E/SN can digitize two slow analog inputs while an embedded controller reads the results over a serial interface. Attention to source impedance and filtering is particularly important when measuring sensors that generate small differential or single-ended signals.
The PCB design should place input filtering and protection close to the converter, provide a quiet reference and supply arrangement, and keep digital interface traces away from sensitive analog nodes. Before production release, verify the supported input range, differential versus single-ended configuration, electrical limits, and startup behavior in the manufacturer datasheet for the exact suffix and package.
直接替換替代品,適用於 MCP3426A3-E/SN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3426A3-E/SN (相同外形與佔位) — 差異在於 Package, Operating Temperature Range, Conversion Rate, Differential Input Range, Number of Input Channels.
MCP3426A3T-E/SN
✅ 直接替換📋 參考替代品(不在目錄中)
MCP3426A3-E/SN 最大額定值與電氣特性
| ADC Type | Sigma-delta ADC |
| 解析度 | 16 bit |
| Number of Input Channels | 2 channels |
| Conversion Rate | 15 samples/s |
| Gain Configuration | A3 gain configuration |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
MCP3426A3-E/SN 8-pin soic 腳位配置指南
MCP3426A3-E/SN(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3426A3-E/SN.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3426A3-E/SN 適用於 6 應用s: Environmental Sensor Acquisition, Industrial Pressure Monitoring, Battery-Powered Instrumentation, Precision Data Acquisition, Portable Sensor Interfaces, Lab and Test Equipment.
Environmental Sensor Acquisition
The MCP3426A3-E/SN fits environmental monitoring systems that measure two slowly changing analog quantities, such as temperature and humidity. Its 16-bit resolution preserves fine numerical detail, while the 15-sample-per-second rate is appropriate for values that change over seconds or minutes rather than high-frequency waveforms. The two-channel sigma-delta architecture also helps support digital filtering and repeatable dc measurements. Design the front end with sensor-specific excitation or biasing, input filtering, and protection, then confirm that source impedance and common-mode limits meet the manufacturer’s input requirements.
Industrial Pressure Monitoring
For industrial pressure, level, or process monitoring, the MCP3426A3-E/SN can digitize two low-frequency sensor outputs while a controller performs filtering, thresholding, and alarm logic. The 16-bit conversion resolution supports precision-oriented measurements, and the 15-sample-per-second throughput is sufficient for many process variables that update gradually. Place protection, filtering, and sensor excitation close to the converter, and isolate high-energy wiring from the analog input traces. The gain configuration and absolute input limits must be matched to the transducer output before the circuit is finalized.
Battery-Powered Instrumentation
The MCP3426A3-E/SN is suitable for battery-powered instrumentation that gathers two precision dc measurements while keeping the conversion rate modest. A 15-sample-per-second sigma-delta ADC avoids the data throughput and power demands associated with rapid sampling, and the 8-pin SOIC package supports compact analog boards. Low-power behavior should be evaluated from the manufacturer’s operating-mode current figures rather than assumed from the conversion rate. Use a regulated low-noise supply, minimize loading on the sensor outputs, and apply input filtering that preserves the required measurement bandwidth.
Precision Data Acquisition
The MCP3426A3-E/SN can serve as the analog front end in a precision data-acquisition system requiring 16-bit results from two channels. Its sigma-delta architecture is well aligned with slow dc measurements, and the 15-sample-per-second conversion rate provides useful data without unnecessary oversampling for many laboratory and industrial signals. A microcontroller or DSP can perform averaging, calibration, and data transfer. For accuracy-sensitive results, characterize offset and gain error in the finished system and verify the reference, input range, and filter values against the manufacturer electrical tables.
Portable Sensor Interfaces
The MCP3426A3-E/SN fits portable monitoring equipment that reads two low-bandwidth sensor channels, such as wearable, handheld, or mobile environmental accessories. The compact 8-pin SOIC footprint leaves board area for the sensor, signal conditioning, and power management, while the 16-bit resolution supports detailed measurement. Its 15-sample-per-second rate is well matched to body, ambient, and slow mechanical conditions that do not require high-frequency sampling. Keep the analog traces short, use a stable supply for the converter, and confirm the complete input envelope to prevent sensor transients from damaging the device.
Lab and Test Equipment
The MCP3426A3-E/SN is useful in laboratory and field-test equipment for digitizing two steady or slowly varying analog signals. A 16-bit sigma-delta converter at 15 samples per second can support measurements, threshold detection, and calibration functions, particularly when the instrument emphasizes precision rather than waveform bandwidth. Pair the converter with low-offset signal conditioning and controlled input switching. During calibration, account for both channels and for the accuracy of the external excitation or reference. Verify the manufacturer’s conversion timing and settling behavior before designing an automated measurement sequence.
工程參考資料,適用於 MCP3426A3-E/SN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3426A3T-E/SN |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC |
| ADC Architecture | Sigma-delta ADC | Sigma-delta ADC |
| Resolution | 16 bit | 16 bit |
| Input Channels | 2 channels | 2 channels |
| Conversion Rate | 15 samples/s | 15 samples/s |
| Gain Configuration | A3 configuration | A3 configuration |
主要差異化特點
- Identical converter configuration in a pin-compatible package (對比MCP3426A3T-E/SN)
- Two-channel measurement in an 8-pin package (對比MCP3426A3T-E/SN)
- Purpose-built low-speed precision conversion (對比MCP3426A3T-E/SN)
設計說明
Keep the analog input traces short and place any input-series resistors, anti-alias filters, and protection components close to the MCP3426A3-E/SN. Route analog and digital return currents separately where practical, and avoid running serial-interface traces beneath sensitive input nodes. A quiet ground connection at the converter is more important than simply increasing copper area around an otherwise noisy return path.
Design the sensor interface for the converter’s specified source impedance rather than treating every sensor output as ideal. If the sensor has high output impedance, include suitable buffering or charge-transfer support and verify settling before each conversion. The 15-sample-per-second rate is well suited to slow signals, but it does not remove the need for correct input conditioning, filtering, and protection against transients.
Use a supply and reference arrangement that remains within the manufacturer’s electrical limits under startup, conversion, and load transients. Place required bypass capacitors adjacent to the appropriate supply pins and observe their voltage and temperature ratings. Because exact supply-current and decoupling values are not listed for this exact suffix, use the manufacturer’s recommended application circuit and electrical-characteristics table for the final values.
合規資訊
Compliance details for the exact MCP3426A3-E/SN orderable part could not be established from the available product information and remain unknown.