Microchip Technology

MCP3426A3-E/SN - 16-Bit Dual-Channel ADC | Microchip

부품 번호: MCP3426A3-E/SN ✗ 단종
8-pin SOIC Package
MOQ: 1 |

MCP3426A3-E/SN 개요

The Microchip Technology MCP3426A3-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with a conversion rate of 15 samples per second, housed in an 8-pin SOIC package. Its two-input architecture allows simultaneous monitoring of two analog channels, while the 16-bit resolution supports precision measurement of low-level sensor and instrumentation signals.

An ADC is a data-converter IC that transforms an analog voltage into a digital value for processing, measurement, or communication. The MCP3426 belongs to the sigma-delta ADC family, where internal oversampling and digital filtering are used to obtain high resolution. In the system hierarchy, it is an analog-to-digital converter, then a data-converter IC, and finally a semiconductor used to connect analog sensors to digital control or data-acquisition systems.

The primary features are 16-bit resolution, two analog inputs, a 15 samples-per-second conversion rate, and an 8-pin SOIC package. The dual-input format reduces the need for a separate converter when a system must monitor two related quantities. The relatively deliberate sampling rate is appropriate for slow-changing process, environmental, and sensor signals rather than high-frequency waveform acquisition.

The sigma-delta architecture is suited to precision dc measurements because digital filtering helps suppress out-of-band noise and averages successive conversions. The usable common-mode range, input bias behavior, internal reference accuracy, and noise performance must be checked against the exact manufacturer datasheet before defining the analog front end. A3 identifies the converter gain configuration, which determines the input scaling for the application.

Typical uses include battery-powered environmental sensing, industrial pressure and temperature monitoring, laboratory instrument inputs, and low-speed data acquisition. In each case, the MCP3426A3-E/SN can digitize two slow analog inputs while an embedded controller reads the results over a serial interface. Attention to source impedance and filtering is particularly important when measuring sensors that generate small differential or single-ended signals.

The PCB design should place input filtering and protection close to the converter, provide a quiet reference and supply arrangement, and keep digital interface traces away from sensitive analog nodes. Before production release, verify the supported input range, differential versus single-ended configuration, electrical limits, and startup behavior in the manufacturer datasheet for the exact suffix and package.

드롭인 대체품: MCP3426A3-E/SN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MCP3426A3-E/SN (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature Range, Conversion Rate, Differential Input Range, Number of Input Channels.

Microchip Technology
Operating Temperature Range: -40 degrees C to +125 degrees C
Conversion Rate: 15 samples per second
Differential Input Range: -2.048 V to +2.048 V
Microchip Technology
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Differential Input Range: ±2.048 V differential
Number of Input Channels: 2
Microchip Technology
Package: 8-pin SOIC, 3.90 mm body width
Operating Temperature Range: -40°C to +125°C
Differential Input Range: ±2.048 V
Microchip Technology
Package: 8-SOIC, 3.90 mm width
Operating Temperature Range: -40 °C to +125 °C
Conversion Rate: 15 SPS
Microchip Technology
Package: 8-pin SOIC, 3.90 mm width
Operating Temperature Range: -55 °C to +125 °C
Differential Input Range: ±2.048 V

MCP3426A3T-E/SN

✅ 드롭인
📦 8-SOIC
Core specifications are identical at 16-bit resolution, 2 channels, and 15 samples/s; the difference is the orderable packaging suffix and delivery format, with 0% change in the stated key conversion parameters.

📋 참조 대체품 (카탈로그에 없음)

MCP3426A3-E/SN 최대 정격 & 전기적 특성

ADC Type Sigma-delta ADC
분해능 16 bit
Number of Input Channels 2 channels
Conversion Rate 15 samples/s
Gain Configuration A3 gain configuration
패키지 8-pin SOIC
실장 유형 Surface mount

MCP3426A3-E/SN 8-pin soic 핀 구성 가이드

MCP3426A3-E/SN(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MCP3426A3-E/SN의 8-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MCP3426A3-E/SN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MCP3426A3-E/SN 적합 용도: 6 애플리케이션s: Environmental Sensor Acquisition, Industrial Pressure Monitoring, Battery-Powered Instrumentation, Precision Data Acquisition, Portable Sensor Interfaces, Lab and Test Equipment.

🧩

Environmental Sensor Acquisition

The MCP3426A3-E/SN fits environmental monitoring systems that measure two slowly changing analog quantities, such as temperature and humidity. Its 16-bit resolution preserves fine numerical detail, while the 15-sample-per-second rate is appropriate for values that change over seconds or minutes rather than high-frequency waveforms. The two-channel sigma-delta architecture also helps support digital filtering and repeatable dc measurements. Design the front end with sensor-specific excitation or biasing, input filtering, and protection, then confirm that source impedance and common-mode limits meet the manufacturer’s input requirements.

🏭

Industrial Pressure Monitoring

For industrial pressure, level, or process monitoring, the MCP3426A3-E/SN can digitize two low-frequency sensor outputs while a controller performs filtering, thresholding, and alarm logic. The 16-bit conversion resolution supports precision-oriented measurements, and the 15-sample-per-second throughput is sufficient for many process variables that update gradually. Place protection, filtering, and sensor excitation close to the converter, and isolate high-energy wiring from the analog input traces. The gain configuration and absolute input limits must be matched to the transducer output before the circuit is finalized.

🔋

Battery-Powered Instrumentation

The MCP3426A3-E/SN is suitable for battery-powered instrumentation that gathers two precision dc measurements while keeping the conversion rate modest. A 15-sample-per-second sigma-delta ADC avoids the data throughput and power demands associated with rapid sampling, and the 8-pin SOIC package supports compact analog boards. Low-power behavior should be evaluated from the manufacturer’s operating-mode current figures rather than assumed from the conversion rate. Use a regulated low-noise supply, minimize loading on the sensor outputs, and apply input filtering that preserves the required measurement bandwidth.

🖥️

Precision Data Acquisition

The MCP3426A3-E/SN can serve as the analog front end in a precision data-acquisition system requiring 16-bit results from two channels. Its sigma-delta architecture is well aligned with slow dc measurements, and the 15-sample-per-second conversion rate provides useful data without unnecessary oversampling for many laboratory and industrial signals. A microcontroller or DSP can perform averaging, calibration, and data transfer. For accuracy-sensitive results, characterize offset and gain error in the finished system and verify the reference, input range, and filter values against the manufacturer electrical tables.

📱

Portable Sensor Interfaces

The MCP3426A3-E/SN fits portable monitoring equipment that reads two low-bandwidth sensor channels, such as wearable, handheld, or mobile environmental accessories. The compact 8-pin SOIC footprint leaves board area for the sensor, signal conditioning, and power management, while the 16-bit resolution supports detailed measurement. Its 15-sample-per-second rate is well matched to body, ambient, and slow mechanical conditions that do not require high-frequency sampling. Keep the analog traces short, use a stable supply for the converter, and confirm the complete input envelope to prevent sensor transients from damaging the device.

🔧

Lab and Test Equipment

The MCP3426A3-E/SN is useful in laboratory and field-test equipment for digitizing two steady or slowly varying analog signals. A 16-bit sigma-delta converter at 15 samples per second can support measurements, threshold detection, and calibration functions, particularly when the instrument emphasizes precision rather than waveform bandwidth. Pair the converter with low-offset signal conditioning and controlled input switching. During calibration, account for both channels and for the accuracy of the external excitation or reference. Verify the manufacturer’s conversion timing and settling behavior before designing an automated measurement sequence.

What is the MCP3426A3-E/SN?
The MCP3426A3-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter from Microchip Technology that operates at 15 samples per second and is packaged in an 8-pin SOIC. According to the manufacturer datasheet, its two-input architecture is intended for precision conversion of low-frequency or slowly changing analog signals. It is suitable for sensor interfaces, instrumentation, environmental monitoring, and other embedded measurement systems.
What is the resolution and sampling rate of MCP3426A3-E/SN?
The MCP3426A3-E/SN provides 16-bit resolution and a conversion rate of 15 samples per second. According to the Microchip product documentation, it is a dual-channel sigma-delta ADC, which combines successive internal conversions with digital filtering to produce a high-resolution measurement. The 15-sample-per-second rate favors slow-changing process and sensor signals rather than high-frequency signal capture.
How many analog input channels does MCP3426A3-E/SN have?
The MCP3426A3-E/SN has two analog input channels. According to the manufacturer documentation, this dual-channel arrangement lets one converter monitor two related sensor or voltage signals without requiring two separate ADC packages. Input configuration, channel selection, and the usable common-mode range should be verified in the manufacturer datasheet for the selected A3 operating mode.
Where can I download the MCP3426A3-E/SN datasheet PDF?
The MCP3426A3-E/SN datasheet is available through the linked Microchip product page for the exact suffix and package. The document should be searched by the complete orderable part number, MCP3426A3-E/SN, because related MCP3426 devices can use different gain options, packages, and temperature suffixes. Use the electrical-characteristics and pin-description tables from that datasheet for final design values.
Where can I find the MCP3426A3-E/SN pinout?
The MCP3426A3-E/SN pinout is documented in the pin-description table of the manufacturer datasheet for the 8-pin SOIC package. Use that table when assigning analog inputs, supply, ground, and digital interface signals. The SOIC footprint contains eight physical positions, but the complete pin names are not reproduced here because a device-specific pin table was not included in the source material.
What can replace the MCP3426A3-E/SN?
The MCP3426A3T-E/SN is the closest identified same-package alternative because it retains the MCP3426A3 configuration, 16-bit dual-channel sigma-delta conversion, 15-sample-per-second rate, and 8-pin SOIC footprint. Its principal difference is the orderable suffix, which changes delivery packaging rather than the core converter function. Confirm the tape-and-reel or tube format, pinout, and grade markings before substituting it in production.
Is MCP3426A3T-E/SN a drop-in replacement for MCP3426A3-E/SN?
The MCP3426A3T-E/SN can serve as a pin-compatible substitute for MCP3426A3-E/SN because both use the 8-pin SOIC package and represent the same 16-bit, dual-channel, 15-sample-per-second MCP3426A3 converter configuration. The key practical difference is the packaging suffix. Confirm reel configuration, orientation, manufacturing traceability, and any required customer labeling before approving the substitution.
Is MCP3426A3-E/SN suitable for sensor measurement?
The MCP3426A3-E/SN is suitable for slow or slowly varying sensor signals because it combines 16-bit resolution, two input channels, and 15 conversions per second. According to the manufacturer documentation, the sigma-delta architecture is intended for precision measurements. Choose suitable excitation or biasing, limit transient inputs, and verify the converter input range and source-impedance requirements in the datasheet.
MCP3426A3-E/SN vs MCP3426A3T-E/SN: which should I choose?
Choose MCP3426A3-E/SN for the orderable configuration associated with the product being assembled, and choose MCP3426A3T-E/SN when its corresponding reel-style packaging format matches production handling. Both are described as 16-bit, dual-channel, 15-sample-per-second sigma-delta ADCs in 8-pin SOIC packages. Their converter specifications are closely aligned, but package delivery format remains the decisive practical distinction.
When should I choose MCP3426A3-E/SN over a different ADC?
Choose MCP3426A3-E/SN when the design needs two analog channels, 16-bit conversion resolution, a 15-sample-per-second rate, and an 8-pin SOIC footprint. It is especially appropriate for slow sensor measurements rather than waveform sampling. If the application requires substantially faster conversion, greater channel count, lower power, or a different accuracy specification, select a converter whose manufacturer specifications directly satisfy those requirements.
Can MCP3426A3-E/SN measure two channels at 15 SPS?
The MCP3426A3-E/SN is a dual-channel converter specified at 15 samples per second, so it can support measurements from two analog inputs at that conversion rate. According to the Microchip documentation, the device uses a sigma-delta conversion architecture. Confirm whether the two inputs are sampled sequentially or otherwise multiplexed, and verify settling time in the manufacturer datasheet before interpreting both results as simultaneous measurements.
How should I protect the MCP3426A3-E/SN inputs?
Protect the MCP3426A3-E/SN inputs with appropriately rated clamping and filtering while observing the converter's absolute maximum input limits. Place input-network components close to the 8-pin SOIC and keep their return paths away from noisy digital lines. The exact resistor, capacitor, clamp, and common-mode values must be selected from the manufacturer input model and the sensor’s electrical behavior rather than from a generic recipe.
What is the power and thermal impact of using MCP3426A3-E/SN?
The MCP3426A3-E/SN is a low-speed precision ADC whose practical power impact depends on supply voltage, selected conversion rate, and operating mode. Use the manufacturer datasheet’s supply-current and dissipation tables to calculate worst-case consumption. Because the package is an 8-pin SOIC, provide adequate copper area and keep analog and digital return currents separated to maintain measurement stability.
Where to buy MCP3426A3-E/SN online?
Use the Request a Quote form on this page to request MCP3426A3-E/SN, current lead time, and available order quantities. The form allows the request to include the exact 8-pin SOIC orderable part number MCP3426A3-E/SN and avoids confusion with related suffix variants. Confirm authorized sourcing, lot traceability, and delivery format before releasing a production order.
What is the price and stock status of MCP3426A3-E/SN?
Use the Request a Quote form on this page for the current commercial terms, stock status, and lead time for MCP3426A3-E/SN. Quote requests should identify the exact suffix, quantity, and required delivery format. Because inventory and commercial terms can change by lot and region, obtain a current response before placing a purchase order or calculating a landed cost.
What is the best Microchip alternative for MCP3426A3-E/SN?
The best identified Microchip alternative is MCP3426A3T-E/SN because it retains the same A3 converter configuration, 16-bit resolution, dual-channel architecture, 15-sample-per-second rate, and 8-pin SOIC footprint. No directly pin-compatible cross-brand replacement was established from the available cross-reference information. Validate the substitute’s electrical limits, package orientation, and delivery format against the manufacturer datasheet.

엔지니어링 참조 데이터: MCP3426A3-E/SN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MCP3426A3-E/SN when a design requires two analog inputs, 16-bit resolution, a 15-sample-per-second conversion rate, and an 8-pin SOIC footprint. It is a strong fit for slow sensor measurements, environmental monitoring, process instrumentation, and precision data acquisition. MCP3426A3T-E/SN is the closest same-package alternative because its stated converter configuration and key electrical characteristics match; select it when its orderable packaging format better matches the assembly process. Before committing, verify the exact input range, common-mode limits, offset and gain error, internal reference behavior, supply requirements, and pin assignments in the manufacturer datasheet. Choose a different ADC if the application needs faster conversion, more channels, different power requirements, or a package other than 8-SOIC.

대체품과의 비교

파라미터 이 제품 MCP3426A3T-E/SN
Brand Microchip Technology Microchip Technology
Package 8-SOIC 8-SOIC
ADC Architecture Sigma-delta ADC Sigma-delta ADC
Resolution 16 bit 16 bit
Input Channels 2 channels 2 channels
Conversion Rate 15 samples/s 15 samples/s
Gain Configuration A3 configuration A3 configuration

주요 차별점

  • Identical converter configuration in a pin-compatible package (vs MCP3426A3T-E/SN)
  • Two-channel measurement in an 8-pin package (vs MCP3426A3T-E/SN)
  • Purpose-built low-speed precision conversion (vs MCP3426A3T-E/SN)

설계 노트

Keep the analog input traces short and place any input-series resistors, anti-alias filters, and protection components close to the MCP3426A3-E/SN. Route analog and digital return currents separately where practical, and avoid running serial-interface traces beneath sensitive input nodes. A quiet ground connection at the converter is more important than simply increasing copper area around an otherwise noisy return path.

Design the sensor interface for the converter’s specified source impedance rather than treating every sensor output as ideal. If the sensor has high output impedance, include suitable buffering or charge-transfer support and verify settling before each conversion. The 15-sample-per-second rate is well suited to slow signals, but it does not remove the need for correct input conditioning, filtering, and protection against transients.

Use a supply and reference arrangement that remains within the manufacturer’s electrical limits under startup, conversion, and load transients. Place required bypass capacitors adjacent to the appropriate supply pins and observe their voltage and temperature ratings. Because exact supply-current and decoupling values are not listed for this exact suffix, use the manufacturer’s recommended application circuit and electrical-characteristics table for the final values.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance details for the exact MCP3426A3-E/SN orderable part could not be established from the available product information and remain unknown.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MCP3426A3-E/SN MCP3426A3-E/SN datasheet MCP3426A3-E/SN datasheet pdf MCP3426A3-E/SN pinout MCP3426A3-E/SN equivalent MCP3426A3-E/SN replacement MCP3426A3-E/SN cross reference MCP3426A3-E/SN vs MCP3426A3T-E/SN MCP3426A3-E/SN price MCP3426A3-E/SN stock Microchip MCP3426A3-E/SN MCP3426A3 16 bit ADC MCP3426A3 8-SOIC pinout MCP3426A3 dual channel sensor ADC what is MCP3426A3-E/SN

관련 부품 & 용어

Microchip Technology MCP3426A3-E/SN MCP3426A3T-E/SN analog-to-digital converter ADC sigma-delta ADC data-converter IC semiconductor 16-bit resolution dual-channel ADC conversion rate 15 samples per second sensor interface data acquisition industrial instrumentation environmental monitoring precision measurement input filtering source impedance common-mode range 8-SOIC SOIC package surface mount SMD analog signal conditioning
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기