Microchip Technology

MCP6002-I/MS - Dual 1MHz Rail-to-Rail Op Amp | Microchip

MPN: MCP6002-I/MS ✓ 啟用中
1.8 V to 6 V Vdss 100 microamperes typical Id 8-lead MSOP Package
MOQ: 1 |

MCP6002-I/MS 概覽

The Microchip Technology MCP6002-I/MS is a dual general-purpose operational amplifier with rail-to-rail input and output operation, a 1.8 V to 6 V supply range, and a typical 1 MHz gain-bandwidth product in an 8-lead MSOP package. The two amplifiers are designed for low-voltage, low-power analog signal conditioning.

An operational amplifier is an active analog circuit element that uses high-gain differential amplification to process signals between its supply rails. The MCP6002 belongs to the operational-amplifier hierarchy and combines rail-to-rail signal handling with a typical quiescent current of 100 microamperes. These characteristics make the device applicable to battery-powered instruments, sensor interfaces, audio and communication paths, and other systems operating from low-voltage rails.

The MCP6002 provides two amplifier channels in one package, reducing board area compared with two separate single amplifiers. Rail-to-rail inputs allow signals to use most of the available supply-voltage range, while rail-to-rail outputs improve output swing. Its 1 MHz typical gain-bandwidth product supports general-purpose amplification, and its 100 microampere typical quiescent current helps limit supply consumption in portable equipment.

Both channels share a common supply architecture, making the MCP6002 suitable for matched signal-processing stages such as instrumentation amplifiers, filters, and differential front ends. The operating range of 1.8 V to 6 V covers common low-voltage supply systems. Because the MCP6002 is a general-purpose amplifier rather than a precision or high-speed device, applications requiring very low offset voltage, very high bandwidth, or extended supply voltage should use a more specialized amplifier family.

Typical uses include battery-operated sensor acquisition, low-voltage audio signal conditioning, industrial control interfaces, communications equipment, and portable measurement systems. In a current-sense or transducer interface, the amplifier can operate directly from a low-voltage rail while accepting signals near either rail. In an active filter or gain stage, the 1 MHz bandwidth should be checked against the required closed-loop bandwidth and stability margin.

PCB implementation should place input and output components close to their associated pins, maintain short feedback paths, and provide adequate ground-plane continuity. Because rail-to-rail operation does not guarantee equally precise behavior throughout the entire input range, designers should evaluate signal levels, common-mode voltage, output load, and required accuracy against the manufacturer's recommended application conditions.

This product page consolidates the manufacturer specifications, package information, pricing evidence, available drop-in candidates, and practical design guidance for the MCP6002-I/MS. It supports faster engineering selection by separating known device characteristics from parameters that require confirmation in the manufacturer datasheet.

直接替換替代品,適用於 MCP6002-I/MS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MCP6002-I/MS (相同外形與佔位) — 差異在於 Input Common-Mode Range, Output Swing, Product Type, Supply Voltage Range.

Microchip Technology
Input Common-Mode Range: Rail-to-rail input
Output Swing: Rail-to-rail output
Product Type: Dual operational amplifier

MCP6002-E/MS

✅ 直接替換
Microchip Technology
📦 8-lead MSOP
Dual operational amplifier · General-purpose amplifier · 2 channels · 1.8 V to 5.5 V · 1 MHz · 100 uA · Rail-to-rail input · Rail-to-rail output

聯絡詢價

查看資料表 →

MCP6002-I/MS 最大額定值與電氣特性

Product Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Supply Voltage Range 1.8 V to 6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain-Bandwidth Product 1 MHz typical
靜態電流 100 microamperes typical
封裝 8-lead MSOP
安裝類型 Surface mount
Application Category General-purpose amplifier

MCP6002-I/MS 8-lead msop 腳位配置指南

MCP6002-I/MS(8-lead msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MCP6002-I/MS 的 8-lead msop 封裝腳位圖

無詳細腳位定義資料: MCP6002-I/MS.

請參閱 資料表 以查看完整腳位配置。

典型應用

MCP6002-I/MS 適用於 6 應用s: Battery-Powered Sensor Acquisition, Low-Voltage Audio Signal Conditioning, Industrial Control Signal Interface, Portable Measurement and Instrumentation, Low-Power Communications Buffering, Portable IoT Sensor Node.

🧩

Battery-Powered Sensor Acquisition

The MCP6002-I/MS fits low-voltage sensor front ends because its 1.8 V to 6 V supply range permits operation from compact battery rails and its 100 microampere typical quiescent current helps control static demand. Rail-to-rail input capability allows the amplifier to accept sensor signals near either supply rail, while rail-to-rail output improves utilization of the available signal range. It can buffer resistive sensors or form the active stage of a low-frequency instrumentation interface. The 1 MHz typical gain-bandwidth product is suitable for moderate-bandwidth sensor signals, but the design should verify offset, bias-current effects, noise, and settling behavior before using it with high-impedance sources.

🎧

Low-Voltage Audio Signal Conditioning

The MCP6002-I/MS can condition line-level or low-level audio signals in portable equipment operating from 1.8 V to 6 V. Rail-to-rail input and output stages provide useful swing on low-voltage rails, and the dual configuration supports paired processing stages without requiring two packages. Its 1 MHz typical gain-bandwidth product is suitable for general audio bandwidth and buffering rather than high-fidelity wideband amplification. Designers should verify output drive into the intended load, input/output distortion, channel matching, and noise performance. The 100 microampere typical quiescent current also helps when battery life is important, although total current depends on load and operating mode.

🏭

Industrial Control Signal Interface

The MCP6002-I/MS is suitable for general-purpose signal conditioning in compact industrial control systems where the field interface operates from a low-voltage rail. Two independent channels can amplify sensor outputs, buffer control signals, or form active filter stages within one 8-lead MSOP package. Rail-to-rail input and output behavior helps preserve signal range, while the 1 MHz typical bandwidth supports many control and instrumentation tasks. For factory equipment, confirm the exact operating-temperature requirement and relevant industrial qualification before deployment. The 100 microampere typical quiescent current is advantageous in distributed low-power nodes, but grounding and isolation remain critical when handling noisy motors, relays, or long sensor cables.

🔧

Portable Measurement and Instrumentation

The MCP6002-I/MS supports compact measurement instruments that combine two analog channels with a low-voltage supply. It can implement non-inverting and inverting gain stages, buffers, active filters, and differential input arrangements around the same dual package. The 1 MHz typical gain-bandwidth product provides moderate signal bandwidth, and the 100 microampere typical quiescent current is useful in handheld equipment. Rail-to-rail operation allows greater input and output range than a fixed common-mode amplifier at low supply voltages. Engineering checks should include resistor-generated noise, amplifier offset, input bias current, load stability, and the settling response required by the measurement bandwidth. A grounded, uninterrupted return path is especially important when processing low-level transducer signals.

🌐

Low-Power Communications Buffering

The MCP6002-I/MS can be used for low-speed communications-interface buffering in portable or distributed systems supplied from a 1.8 V to 6 V rail. Rail-to-rail inputs accommodate logic-level signals close to the supply limits, and rail-to-rail outputs provide improved drive range for downstream digital or analog circuitry. The 1 MHz typical gain-bandwidth product is adequate for many low-rate buffers, though protocol rise-time and bandwidth requirements must be checked. Low quiescent current of 100 microamperes typical helps suit always-on equipment. Board layout should minimize trace capacitance and provide a solid ground reference, while input and output paths should be separated from fast switching nodes to reduce coupling and data errors.

🧩

Portable IoT Sensor Node

The MCP6002-I/MS is appropriate for analog conditioning within a compact IoT sensor node because its 1.8 V minimum supply and 100 microampere typical quiescent current align with low-energy designs. The dual channel count supports buffering or gain stages associated with two sensors, while the 8-lead MSOP package preserves board area. Rail-to-rail operation can improve signal utilization on cells or low-voltage regulators, but input offset and noise may become important when resolving small sensor outputs. Select external resistor networks and capacitors for the required bandwidth, keep feedback loops short, and place bypass capacitance close to the supply pins. For systems operating from a regulated 3.3 V or 5 V rail, verify the total amplifier and load current against the power budget.

推薦產品摘要

MCP6002 Dual low-voltage operational-amplifier family member 用於: Battery-Powered Sensor Acquisition, Low-Voltage Audio Signal Conditioning, Industrial Control Signal Interface, Portable Measurement and Instrumentation, Low-Power Communications Buffering, Portable IoT Sensor Node MCP6001 Single-channel family member for separate signal channels 用於: Battery-Powered Sensor Acquisition, Industrial Control Signal Interface, Portable IoT Sensor Node MCP6004 Quad family member for multi-channel acquisition 用於: Battery-Powered Sensor Acquisition, Low-Voltage Audio Signal Conditioning, Industrial Control Signal Interface, Portable Measurement and Instrumentation, Low-Power Communications Buffering, Portable IoT Sensor Node
What are the key specifications of MCP6002-I/MS that engineers should know?
The MCP6002-I/MS is a dual, general-purpose operational amplifier with rail-to-rail input and output, a 1.8 V to 6 V operating range, 1 MHz typical gain-bandwidth product, and 100 microampere typical quiescent current. According to the Microchip Technology MCP6002 product page, it is packaged in an 8-lead MSOP. These characteristics position it for low-voltage signal conditioning, sensor interfaces, filters, and battery-powered systems.
Where can I download the MCP6002-I/MS datasheet PDF?
The MCP6002-I/MS datasheet can be obtained from the official Microchip Technology MCP6002 product page, which provides the manufacturer documentation for the dual amplifier family. The product page identifies the MCP6002 as a 1.8 V to 6 V rail-to-rail operational amplifier with 1 MHz typical gain-bandwidth product. Use the manufacturer datasheet for the definitive electrical-characteristics table, package drawing, and recommended operating conditions.
Where can I find the MCP6002 pinout?
The MCP6002 pinout is documented in the package-drawing and pin-description sections of the Microchip Technology MCP6002 datasheet. The MCP6002-I/MS uses an 8-lead MSOP package containing two operational-amplifier channels. Use the manufacturer package drawing to assign power, input, output, and feedback connections before laying out the PCB or checking continuity.
What is the MCP6002-I/MS supply voltage range?
The MCP6002-I/MS operates from 1.8 V to 6 V. According to the Microchip Technology MCP6002 product page, both the input and output stages support rail-to-rail operation across that supply range. This makes the amplifier suitable for low-voltage systems using 1.8 V, 2.5 V, 3.3 V, 5 V, or compatible intermediate rails.
What is the MCP6002 op amp gain-bandwidth product?
The MCP6002 has a typical gain-bandwidth product of 1 MHz. According to the Microchip Technology MCP6002 product page, this bandwidth is intended for general-purpose low-voltage amplification rather than high-speed signal processing. When selecting closed-loop gain, account for the amplifier's finite bandwidth and phase margin to maintain an adequate stability margin.
How much current does MCP6002-I/MS consume?
The MCP6002 has a typical quiescent current of 100 microamperes. According to the Microchip Technology MCP6002 product page, this low supply demand suits portable and battery-operated equipment. Actual current depends on supply voltage, input common-mode voltage, output loading, channel activity, and the selected operating mode, so evaluate the complete circuit at its worst-case conditions.
Can MCP6002-I/MS be used in battery-powered sensor circuits?
Yes, the MCP6002-I/MS is suitable for many battery-powered sensor circuits because it operates down to 1.8 V and has a typical quiescent current of 100 microamperes. Rail-to-rail inputs and outputs improve usable signal range on low-voltage rails. The sensor output, noise requirements, load current, and amplifier input-bias effects must still be checked for each design.
MCP6002-I/MS vs MCP6002-E/MS: which temperature grade should I choose?
The MCP6002-I/MS and MCP6002-E/MS share the same dual-amplifier architecture and 8-lead MSOP package, while their ordering codes indicate different manufacturer grade designations. The MCP6002-I/MS is the industrial-temperature-oriented ordering option for the requested configuration. Confirm the exact temperature limits, qualification status, and full ordering-code details in the Microchip Technology datasheet before production release.
When should I choose MCP6002-I/MS over MCP6002-E/MS?
Choose the MCP6002-I/MS when the required temperature range corresponds to its industrial-grade ordering designation and you need the exact 8-lead MSOP configuration specified for the design. The MCP6002-E/MS is a same-package candidate with a different grade code, but its precise limits and qualifications must be checked. Functionally similar grade codes do not automatically make every orderable variant interchangeable.
What is the best drop-in replacement for MCP6002-I/MS?
The MCP6002-E/MS is the closest documented same-package candidate, but no fully verified five-part drop-in set is available for the MCP6002-I/MS. It uses the MCP6002 family architecture in the same 8-lead MSOP format, with grade-code differences that must be confirmed. Because no independently validated cross-brand equivalent was identified, verify temperature limits, electrical characteristics, and pin functions in the manufacturer documentation.
Can another manufacturer directly replace MCP6002-I/MS?
No cross-brand drop-in replacement can be confirmed from the available cross-reference information. A suitable substitute would require the same 8-lead MSOP pinout, two amplifier channels, rail-to-rail input and output behavior, a compatible 1.8 V to 6 V supply range, and acceptable dynamic performance. Request a detailed cross-reference review rather than selecting a candidate solely by bandwidth or package name.
Where can I buy MCP6002-I/MS online and check its price?
Use the Request a Quote form on this page to request current MCP6002-I/MS pricing, stock, lead time, and orderable quantity. The form is the appropriate channel for a current commercial quotation and avoids presenting a stale catalog figure as live inventory. Package marking, production quantity, and delivery requirements should be included in the request.
What is the lead time for MCP6002-I/MS?
The current lead time for MCP6002-I/MS should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, date code, packaging format, manufacturing status, and supply conditions. Include the required quantity and target delivery date in the request so the commercial response reflects the actual production requirement.
Is MCP6002-I/MS in stock?
Current inventory for MCP6002-I/MS should be confirmed through the Request a Quote form on this page. A listing or distributor landing page does not guarantee that a specific quantity is immediately available for shipment. State the required quantity, date code, and acceptable delivery window so procurement can confirm allocation and expected dispatch.
Is MCP6002-I/MS suitable for low-voltage audio and communications?
The MCP6002-I/MS can suit many low-voltage audio and communications buffer stages because it offers rail-to-rail input and output operation, a 1.8 V to 6 V supply range, and 1 MHz typical gain-bandwidth product. According to the Microchip Technology product page, it also has 100 microampere typical quiescent current. Audio noise, distortion, channel separation, and communication bandwidth should be checked against the system requirements.

工程參考資料,適用於 MCP6002-I/MS — 比較、設計指引及合規資訊。

選型指南

Choose the MCP6002-I/MS for low-voltage, dual-channel signal conditioning when the circuit operates from 1.8 V to 6 V and needs rail-to-rail input and output behavior. Its 1 MHz typical gain-bandwidth product and 100 microampere typical quiescent current are appropriate for sensor buffers, low-speed communications interfaces, portable measurement circuits, and general audio stages. Choose the MCP6002-E/MS when its exact manufacturer grade designation better matches the required temperature or qualification conditions while retaining the same MCP6002 architecture and 8-lead MSOP package. Neither part should be selected for high-speed signal paths, very low-offset precision measurements, or extended supply-voltage requirements without checking those characteristics in the datasheet. No independently verified cross-brand drop-in candidate is available, so a different manufacturer's device should be approved only after a complete pinout, electrical, temperature, and qualification review.

與替代品比較

參數 本產品 MCP6002-E/MS
Brand Microchip Technology Microchip Technology
Package 8-lead MSOP 8-lead MSOP
Channel Count 2 channels 2 channels
Supply Voltage Range 1.8 V to 6 V 1.8 V to 6 V
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Gain-Bandwidth Product 1 MHz typical 1 MHz typical
Quiescent Current 100 microamperes typical 100 microamperes typical
Ordering Grade I designation E designation

主要差異化特點

  • Two rail-to-rail amplifier channels in one 8-lead MSOP (對比MCP6002-E/MS)
  • Operation from low-voltage battery-oriented supply rails (對比MCP6002-E/MS)
  • Low quiescent current for dual-channel operation (對比MCP6002-E/MS)

設計說明

Place the amplifier input, output, feedback-resistor, and compensation components close to the associated MSOP pins. Keep feedback traces short to reduce parasitic capacitance and improve loop stability. Route both amplifier channels with symmetric grounding where channel matching matters, and provide a continuous ground plane beneath the device. Place supply bypass capacitance close to the supply pins and connect it through short, low-inductance paths.

Calculate supply demand from the 100 microampere typical quiescent current plus output-current and dynamic contributions. Rail-to-rail operation does not eliminate the need for adequate supply headroom, and output current still depends on load impedance, output voltage, and frequency. Confirm the regulator can start into the required load and that the MCP6002-I/MS supply remains within 1.8 V to 6 V under worst-case conditions.

Evaluate closed-loop gain against the 1 MHz typical gain-bandwidth product and include the required phase-margin margin in the filter or amplifier design. High-impedance sources require attention to input bias current and capacitance, while capacitive loads may require an isolation resistor. Do not assume rail-to-rail input operation provides identical precision at every common-mode voltage; check the manufacturer's characteristic plots for the signal range of interest.

Do not treat the I and E ordering-grade codes as interchangeable without checking the exact temperature range and qualification requirements. Likewise, a package match alone does not establish full drop-in compatibility. Verify channel pin functions, supply limits, electrical characteristics, and production ordering codes against the manufacturer datasheet. For a new PCB, use the official MSOP land pattern rather than scaling a generic SOIC footprint.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is stated for this ordering code. AEC-Q100 is not applicable to the general-purpose amplifier ordering designation unless the manufacturer documentation explicitly states otherwise.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

mcp6002 datasheet mcp6002 op amp mcp6002 pinout mcp6002 op amp datasheet mcp6002 spice model mcp6002 op amp schematic mcp6002 price mcp6002 equivalent mcp6002 module MCP6002-I/MS price MCP6002-I/MS pinout MCP6002-I/MS equivalent Microchip MCP6002-I/MS MCP6002-I/MS 8-MSOP

相關元件與詞彙

Microchip Technology MCP6002-I/MS MCP6002 MCP6002-E/MS MCP6001 MCP6004 operational amplifier dual amplifier general-purpose amplifier rail-to-rail input rail-to-rail output gain-bandwidth product GBWP quiescent current low-dropout power architecture analog signal conditioning sensor interface industrial control audio amplification IoT sensor node MSOP package surface-mount package 1.8 V supply 6 V maximum supply 1 MHz bandwidth
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情