Microchip Technology

MCP6034-E/SL - 10kHz Low-Power Quad Op Amp | Microchip

MPN: MCP6034-E/SL ✓ 啟用中
Less than 150 uV Vdss 900 nA per amplifier Id 14-pin SOIC, 3.90 mm width Package
MOQ: 1 |

MCP6034-E/SL 概覽

The Microchip Technology MCP6034-E/SL is a four-channel, rail-to-rail operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, and input offset voltage below 150 uV, housed in a 14-pin SOIC package.

An operational amplifier, or op amp, is an analog signal-conditioning IC used to amplify, buffer, filter, compare, or control voltages. The MCP6034 belongs to the broader precision operational amplifier family and combines low power consumption, high open-loop gain, low bias current, and rail-to-rail input and output operation. These characteristics place it between general-purpose amplification and precision low-energy acquisition systems.

Key features include four amplifiers in one package, operation from a single supply as low as 1.8 V, a typical operating current of 900 nA per amplifier, and rail-to-rail input and output swing. The 10 kHz gain-bandwidth product is sufficient for low-frequency sensor conditioning, battery monitoring, and portable measurement systems. Low input bias current reduces errors when measuring high-impedance sources.

Microchip's advanced CMOS process supports low bias current and low quiescent consumption while retaining useful open-loop gain. Rail-to-rail input capability increases the usable common-mode range, while rail-to-rail output swing improves dynamic range in low-voltage systems. Because the amplifiers operate from one supply, they are well suited to systems where a negative rail is unavailable or undesirable.

Typical applications include portable instrumentation, low-current sensor interfaces, battery-powered monitoring, industrial process measurement, and precision current sensing. The quad configuration also reduces board area and can support independent filtering, buffering, or gain stages within one compact package.

When designing with the MCP6034-E/SL, verify the maximum input common-mode range, output swing, and capacitive-load behavior under the intended load conditions. Input and output stability should be evaluated with realistic source impedance, sensor capacitance, and PCB leakage rather than relying only on nominal open-loop behavior.

This page combines technical specifications, same-package replacement options, application guidance, and practical PCB design considerations to help engineers evaluate the MCP6034-E/SL for precision, low-power analog designs.

直接替換替代品,適用於 MCP6034-E/SL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MCP6034-E/SL (相同外形與佔位) — 差異在於 Output Swing, Package.

Microchip Technology
Output Swing: Rail-to-rail output
Package: 14-TSSOP, 0.173 in / 4.40 mm width

MCP6034-E/ST

✅ 直接替換
Microchip Technology
📦 14-pin SOIC
4 circuits · General-purpose operational amplifier · 1.8 V · 900 nA · 10 kHz · Less than 150 uV · Rail-to-rail input · Rail-to-rail output

聯絡詢價

查看資料表 →

MCP6034-I/SL

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-pin SOIC
Same MCP6034 family ratings and 14-pin SOIC footprint; industrial temperature grade may replace the extended-temperature grade, with temperature limits requiring verification.

📋 參考替代品(不在目錄中)

MCP6034-I/ST

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-pin SOIC
Same MCP6034 family ratings and 14-pin SOIC footprint; industrial temperature grade and shipment-format suffix differ from MCP6034-E/SL.

📋 參考替代品(不在目錄中)

MCP6034-E/SL 最大額定值與電氣特性

Number of Amplifiers 4 channels
Amplifier Type General-purpose operational amplifier
Gain-Bandwidth Product 10 kHz
Typical Operating Current 900 nA per amplifier
Input Offset Voltage Less than 150 uV
Minimum Single-Supply Voltage 1.8 V
Output Swing Rail-to-rail
Input Type Rail-to-rail
封裝 14-pin SOIC, 3.90 mm width
安裝類型 Surface mount
Process Technology Advanced CMOS

MCP6034-E/SL 14-pin soic, 3.90 mm width 腳位配置指南

MCP6034-E/SL(14-pin soic, 3.90 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MCP6034-E/SL 的 14-pin soic, 3.90 mm width 封裝腳位圖

無詳細腳位定義資料: MCP6034-E/SL.

請參閱 資料表 以查看完整腳位配置。

典型應用

MCP6034-E/SL 適用於 6 應用s: Portable Sensor Signal Conditioning, Battery-Powered Monitoring, Industrial Process Measurement, Precision Current Sensing, Low-Voltage Audio and Control Buffers, Data Acquisition Interface.

📱

Portable Sensor Signal Conditioning

The MCP6034-E/SL fits portable sensor interfaces that require several channels of low-frequency amplification without adding a negative supply. Its 1.8 V minimum single-supply operation, 900 nA typical current per amplifier, and rail-to-rail input and output behavior support low-energy measurement systems. Four channels can condition bridge, resistive, or buffered sensor signals while reducing package count. The 10 kHz gain-bandwidth product is appropriate for slow sensor signals, although source impedance, input capacitance, noise, and accuracy must still be evaluated for the selected gain.

⚡

Battery-Powered Monitoring

The MCP6034-E/SL is appropriate for battery-powered voltage and current monitoring where four amplifiers can operate from one low-voltage rail. Its 900 nA typical operating current per amplifier reduces standby burden, while operation from 1.8 V supports cells and regulated low-voltage rails. Rail-to-rail output swing improves usable signal range near the supply limits. Because the gain-bandwidth product is only 10 kHz, the device is best for slow measurements rather than fast transients, and input offset error must be included in the overall measurement budget.

🏭

Industrial Process Measurement

The MCP6034-E/SL can support low-frequency industrial process signals when the design requires several precision amplifier channels in a 14-pin package. Its input offset voltage below 150 uV, high open-loop gain, and rail-to-rail input operation help preserve small signals derived from resistive sensors. The 900 nA typical current per amplifier is valuable in distributed, power-constrained measurement nodes. Engineers should verify input bias current, noise, common-mode range, and output-drive limits against the selected sensor and front-end network.

🔧

Precision Current Sensing

The MCP6034-E/SL can amplify low-level shunt or current-transformer signals in compact instrumentation when four channels share a common low-power architecture. The specified offset voltage below 150 uV limits input-referred error, and the 10 kHz gain-bandwidth product is suitable for many slowly changing current measurements. Single-supply operation simplifies systems without a negative rail. Stability and common-mode behavior must be checked against shunt impedance, filter capacitance, and the selected gain because sensor loading can dominate the practical accuracy.

🎧

Low-Voltage Audio and Control Buffers

The MCP6034-E/SL can serve as a low-frequency audio or control-signal buffer in systems operating from a single low-voltage rail. Rail-to-rail input and output operation improves signal range near the supply limits, while the quad configuration allows four buffered channels in one package. Its 10 kHz gain-bandwidth product is appropriate for control paths and low-bandwidth audio functions, not high-frequency full-range audio reproduction. Designers should evaluate output-current capability, capacitive-load stability, distortion, and noise before assigning it to a precision audio path.

🖥️

Data Acquisition Interface

The MCP6034-E/SL is useful ahead of a low-speed multiplexer or ADC in compact data-acquisition equipment. Four channels can provide independent gain, filtering, or buffering stages, while the 900 nA typical current per amplifier supports low-power acquisition. The 10 kHz gain-bandwidth product must be matched to the intended signal bandwidth; it is suitable for temperature, pressure, and position measurements but not rapid waveform acquisition. Validate settling time, source impedance, ADC input range, and common-mode voltage during the analog-interface design.

What is the MCP6034-E/SL?
The MCP6034-E/SL is a four-channel, low-power operational amplifier with rail-to-rail input and output operation in a 14-pin SOIC package. According to the Microchip manufacturer datasheet, it provides a 10 kHz gain-bandwidth product, typical operating current of 900 nA per amplifier, and input offset voltage below 150 uV. Its four independent channels make it suitable for compact precision analog signal-conditioning systems.
What is the operating voltage of MCP6034-E/SL?
The MCP6034-E/SL operates from a single supply as low as 1.8 V. According to the Microchip manufacturer datasheet, its CMOS implementation supports low-voltage operation while maintaining rail-to-rail input and output characteristics. The exact maximum supply voltage should be confirmed in the Electrical Characteristics table before applying the device to a new design.
What are the key specifications of MCP6034-E/SL that engineers should know?
The MCP6034-E/SL combines four op-amp channels, a 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, offset voltage below 150 uV, and rail-to-rail input and output operation. According to the Microchip manufacturer datasheet, it uses advanced CMOS technology to provide low bias current, high open-loop gain, and operation from a 1.8 V single supply.
Is MCP6034-E/SL suitable for battery-powered sensor applications?
The MCP6034-E/SL is well suited to battery-powered sensor interfaces because it operates from a 1.8 V single supply and consumes 900 nA typical operating current per amplifier. According to the Microchip manufacturer datasheet, its rail-to-rail input and output operation also supports low-voltage signal chains. Its 10 kHz gain-bandwidth product favors slow analog signals rather than high-speed waveform or data acquisition.
Where can I download the MCP6034-E/SL datasheet PDF?
The authoritative MCP6034-E/SL documentation is available through the Microchip product page linked on this page and through the manufacturer datasheet link. The device family is documented as the 0.9 uA high-precision op-amp MCP6034 family. Use the Electrical Characteristics and Typical Performance Curves sections to verify limits, common-mode behavior, output swing, and stability conditions.
Where can I find the MCP6034-E/SL pinout?
The MCP6034-E/SL pinout is defined for the 14-pin SOIC package in the Microchip manufacturer datasheet. Use the package drawing and pin-description table when assigning amplifier inputs, outputs, supply pins, and any exposed or unused locations. Because the complete pin table is not published as a verified line-by-line table here, follow the manufacturer pinout directly during schematic capture and PCB layout.
Where to buy MCP6034-E/SL online?
Use the Request a Quote form on this page to request MCP6034-E/SL availability, current lead time, and an order quotation. The form is the appropriate purchasing path when exact stock, allocated inventory, or delivery scheduling must be confirmed for production quantities. Engineers can also review the manufacturer product page for the latest device status and family documentation.
What is the price of MCP6034-E/SL?
The current MCP6034-E/SL quotation is available through the Request a Quote form on this page. This inquiry route avoids publishing a transient price that may not match required quantities, shipment destinations, or date codes. For production planning, include the required order quantity, target delivery date, and acceptable package and shipment condition when submitting the request.
What is the lead time for MCP6034-E/SL?
Request the current MCP6034-E/SL lead time through the Request a Quote form on this page. Lead time can depend on order quantity, factory inventory, package configuration, and production schedule, so a current manufacturing response is more useful than a generic historical estimate. Include your forecast quantities and required delivery date so sourcing can confirm the appropriate supply plan.
Is MCP6034-E/SL in stock?
Use the Request a Quote form on this page to check current MCP6034-E/SL stock and allocation status. Inventory availability can change with order volume and replenishment timing, particularly when planning multi-quarter production. Provide your required quantity, date code preference, and shipment destination so the request can be matched to the available manufacturing and distribution position.
What can replace MCP6034-E/SL?
The closest same-package drop-in candidates are the MCP6034 family temperature-grade and shipment-format options identified on this page, subject to final qualification and procurement checks. According to the Microchip manufacturer datasheet, the family provides four channels, 10 kHz gain-bandwidth, 900 nA typical operating current per amplifier, and rail-to-rail operation. Verify the suffix-specific temperature grade and shipping configuration before substitution.
MCP6034-E/SL vs MCP6034-E/ST - which is better?
The MCP6034-E/SL and MCP6034-E/ST belong to the same MCP6034 electrical family and use the same 14-pin SOIC footprint, but their shipment-format suffixes differ. According to the Microchip manufacturer datasheet, the family shares a 10 kHz gain-bandwidth product and 900 nA typical operating current per amplifier. Choose based on the required incoming format, labeling, and manufacturing process rather than expecting different amplifier performance.
When should I choose MCP6034-E/SL over another quad low-power op amp?
Choose the MCP6034-E/SL when four low-frequency precision channels, operation from a 1.8 V single supply, and approximately 900 nA typical current per amplifier are priorities. According to the Microchip manufacturer datasheet, it also provides rail-to-rail input and output operation. A higher-bandwidth amplifier may be preferable for faster signals, while a lower-power part may be required in continuously active, ultra-low-energy nodes.
Can MCP6034-E/SL replace MCP602-E/SN?
The MCP602-E/SN is not a direct drop-in replacement for the MCP6034-E/SL because the MCP6034-E/SL is a four-channel device in a 14-pin SOIC, whereas the MCP602 family comparison identifies a two-channel MCP602 configuration in an 8-pin SOIC. The different channel count and pin count require a different footprint and schematic. Treat them as functional alternatives rather than pin-compatible substitutions.
Is MCP6034-E/SL the same as MCP6034-E/ST?
The MCP6034-E/SL and MCP6034-E/ST are members of the same MCP6034 family with the same 14-pin SOIC footprint and core amplifier ratings. According to the Microchip manufacturer datasheet, the family provides 10 kHz gain-bandwidth, 900 nA typical operating current per amplifier, offset voltage below 150 uV, and rail-to-rail operation. The suffix difference concerns the ordering and shipment configuration rather than a change in the basic amplifier architecture.

工程參考資料,適用於 MCP6034-E/SL — 比較、設計指引及合規資訊。

選型指南

Choose the MCP6034-E/SL for low-frequency precision analog designs requiring four amplifier channels, operation from a 1.8 V single supply, rail-to-rail input and output behavior, and approximately 900 nA typical current per amplifier. Choose MCP6034-E/ST when the required incoming format uses that suffix. Choose MCP6034-I/SL or MCP6034-I/ST when their industrial temperature grade matches the application and the procurement configuration is suitable. These MCP6034 options share the same core 14-pin SOIC footprint and ratings. Do not use the two-channel MCP602-E/SN as a footprint-compatible replacement because its pin count and channel count differ; it can serve only as a functional alternative after schematic and layout changes.

與替代品比較

參數 本產品 MCP6034-E/ST MCP6034-I/SL MCP6034-I/ST
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Number of Amplifiers 4 channels 4 channels 4 channels 4 channels
Gain-Bandwidth Product 10 kHz 10 kHz 10 kHz 10 kHz
Typical Operating Current 900 nA per amplifier 900 nA per amplifier 900 nA per amplifier 900 nA per amplifier
Input Offset Voltage Less than 150 uV Less than 150 uV Less than 150 uV Less than 150 uV
Minimum Single-Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Temperature Grade Extended-temperature grade indicated by E suffix Extended-temperature grade indicated by E suffix Industrial-temperature grade indicated by I suffix Industrial-temperature grade indicated by I suffix
Process Technology Advanced CMOS Advanced CMOS Advanced CMOS Advanced CMOS

主要差異化特點

  • Combines four low-power precision amplifier channels in one package (對比MCP602-E/SN)
  • Supports very low single-supply operation (對比MCP6034-I/SL)
  • Maintains the same core electrical performance across listed MCP6034 options (對比MCP6034-E/ST)

設計說明

Do not treat the 10 kHz gain-bandwidth product as a signal-accuracy limit independent of gain. For example, closed-loop bandwidth and settling behavior change with the selected noise gain. Calculate the required small-signal bandwidth, allowable source impedance, and settling time for the actual feedback network. The MCP6034-E/SL is best suited to low-frequency sensor and control signals rather than fast transient capture.

Place each amplifier's input, feedback components, and decoupling capacitor close to the associated pins. Keep sensitive input traces away from switching nodes and high-current return paths. For high-impedance sensors, use short traces, guard structures where appropriate, and clean PCB surfaces to limit leakage and contamination-induced bias errors. The low 900 nA typical current per amplifier does not eliminate input-node leakage constraints.

Use rail-to-rail input and output capability to maximize low-voltage signal range, but verify the output swing under the expected load current. Allow sufficient headroom for output saturation during startup, sensor faults, and control transients. Bypass the supply pins with local ceramic capacitance and keep the return current path short so switching noise on the supply rail does not become analog signal error.

Check stability with the actual sensor, filter capacitors, cable capacitance, and output load rather than assuming the nominal 10 kHz gain-bandwidth product guarantees an unconditionally stable amplifier. Add isolation resistors near the amplifier output when driving capacitive loads, then confirm settling and overshoot on the assembled board. This is especially important in long-cable sensor installations and multiplexed acquisition boards.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance and automotive qualification information must be confirmed for the exact ordering code using Microchip product documentation.

相關搜尋

MCP6034-E/SL MCP6034-E/SL datasheet MCP6034-E/SL datasheet pdf MCP6034-E/SL pinout MCP6034-E/SL schematic MCP6034-E/SL equivalent MCP6034-E/SL replacement MCP6034-E/SL cross reference MCP6034-E/SL footprint MCP6034-E/SL spice model MCP6034-E/SL price MCP6034-E/SL stock Microchip MCP6034-E/SL MCP6034 14-SOIC pinout MCP6034 low power sensor amplifier

相關元件與詞彙

Microchip Technology MCP6034-E/SL MCP6034-E/ST MCP6034-I/SL MCP6034-I/ST MCP602-E/SN operational amplifier op amp precision operational amplifier quad amplifier signal-conditioning IC analog IC semiconductor advanced CMOS rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage quiescent current common-mode voltage battery-powered instrumentation industrial process measurement precision current sensing SOIC-14 QFN family
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情