MCP6042-I/MS - Dual 14 kHz Low-Power CMOS Op Amp
MPN: MCP6042-I/MS ✓ 啟用中MCP6042-I/MS 概覽
An operational amplifier is an analog amplifier IC that uses high open-loop gain to amplify small input-voltage differences. The MCP6042 belongs to the operational-amplifier hierarchy within amplifier ICs and analog signal-chain processing. Its rail-to-rail input stage accepts signals across most of the supply range, while the rail-to-rail output stage can swing close to the positive and negative supply rails, improving usable dynamic range in low-voltage systems.
Key features include two amplifier channels, a 14 kHz gain-bandwidth product, a 3 V/µs slew rate, 1 pA typical input bias current, and 600 nA typical operating current per amplifier. The 1 pA bias current and low supply current are especially useful for high-impedance sensors, while the 1.4 V minimum operating voltage supports energy-limited and single-cell power systems. Offset voltage below 3 mV helps reduce output error in precision DC applications.
The MCP6042 uses Microchip's advanced CMOS technology to provide low bias current, high open-loop gain, and a rail-to-rail output swing. These characteristics make it more appropriate for portable measurement and sensor-conditioning applications than for high-bandwidth signal processing. Its 14 kHz gain-bandwidth product provides useful bandwidth for low-frequency control loops, filtering, buffering, and general-purpose analog amplification.
Typical uses include battery-powered sensor interfaces, portable medical instruments, industrial transmitters, low-voltage data acquisition, and low-frequency active filters. In these applications, the amplifier may follow a bridge sensor, photodiode, or low-current transducer. The dual configuration can process two related channels, such as a differential sensor input and a reference signal, without requiring two separate packages.
Design with the supply range and output-swing limits in mind, and use the manufacturer's pin-description table when assigning PCB tracks. Decoupling capacitors should be placed close to the supply pins, and sensitive high-impedance inputs should be guarded against leakage and contamination. The 8-pin MSOP footprint also allows a compact implementation, although adequate copper and solder mask clearance remain necessary for assembly.
This page consolidates the manufacturer's core electrical characteristics, verified commercial availability, package details, and practical design considerations into a concise engineering reference. It also distinguishes the same-family MSOP replacement candidates from alternatives that require a different footprint, helping designers evaluate PCB reuse without overlooking thermal, noise, or signal-range requirements.
直接替換替代品,適用於 MCP6042-I/MS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP6042-I/MS (相同外形與佔位) — 差異在於 Amplifier Type, Input Common-Mode Range, Input Offset Voltage, Number of Channels, Output Swing.
MCP6042T-E/MS
✅ 直接替換📋 參考替代品(不在目錄中)
MCP6042-I/MS 最大額定值與電氣特性
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 14 kHz |
| Slew Rate | 3 V/µs |
| Typical Operating Current | 600 nA per amplifier |
| Input Bias Current | 1 pA typical |
| Input Offset Voltage | Less than 3 mV |
| Supply Voltage Range | 1.4 V to 5.5 V |
| Output Current | 30 mA |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Process Technology | Advanced CMOS |
| Open-Loop Gain | High open-loop gain |
| 封裝 | 8-pin MSOP |
| 安裝類型 | Surface mount |
MCP6042-I/MS 8-pin msop 腳位配置指南
MCP6042-I/MS(8-pin msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP6042-I/MS.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP6042-I/MS 適用於 6 應用s: Battery-Powered Sensor Interface, Portable Medical Signal Conditioning, Low-Voltage Data Acquisition, Industrial Transmitter Signal Path, Photodiode and Optical Signal Interface, Portable Instrumentation Buffering.
Battery-Powered Sensor Interface
The MCP6042-I/MS fits low-power sensor front ends because its 600 nA typical operating current reduces consumption while its 1 pA typical input bias current limits loading on high-impedance sources. Place one channel at the input of a resistive or bridge sensor and use the second channel for buffering a reference or diagnostic signal. Operation from 1.4 V to 5.5 V supports compact battery-powered designs, while rail-to-rail input and output behavior preserves signal range. Keep the input traces short, use guarding on very high-impedance nodes, and verify leakage from the PCB and connectors.
推薦
Portable Medical Signal Conditioning
The MCP6042-I/MS is suitable for portable medical signal-conditioning circuits that need low noise-related operating current and high input impedance. Its 1 pA typical input bias current reduces errors when amplifying high-source-impedance biomedical sensors, while the 3 V/µs slew rate supports low-frequency waveforms with limited large-signal distortion. The dual amplifier can process a differential input and provide an intermediate buffer without using two packages. Rail-to-rail operation is valuable in compact systems, although clinical designs must also evaluate noise, accuracy, isolation, and applicable medical requirements independently.
推薦
Low-Voltage Data Acquisition
The MCP6042-I/MS can condition low-level signals in compact data-acquisition systems operating from 1.4 V to 5.5 V. Its 14 kHz gain-bandwidth product is appropriate for slowly varying process, environmental, or instrumentation signals rather than wideband waveforms. Two channels can handle complementary sensor outputs or implement active filtering and gain stages. The 600 nA operating current is valuable in field-powered equipment, and the rail-to-rail output provides useful signal swing near low supply limits. Designers should include gain-error, offset, settling-time, and output-swing calculations for their selected closed-loop configuration.
推薦
Industrial Transmitter Signal Path
The MCP6042-I/MS is appropriate for low-frequency transmitter and receiver signal paths that prioritize low power, high input impedance, and compact implementation. The 1 pA typical bias current is useful with resistive or transducer inputs, while the 14 kHz gain-bandwidth product supports slow process-variable signals. Its rail-to-rail input and output operation helps maximize available range in 3.3 V or 5 V industrial electronics. Choose the temperature grade that covers the expected enclosure ambient and verify electromagnetic, surge, isolation, and calibration requirements at the system level rather than treating the op amp as the sole protection element.
推薦
Photodiode and Optical Signal Interface
The MCP6042-I/MS can serve as a low-frequency transimpedance or voltage-gain stage in optical sensing systems. Its 1 pA typical input bias current is favorable when handling weak photodiode currents, and its low 600 nA operating current helps conserve power in compact optical modules. The 3 V/µs slew rate is more than adequate for many slow light-measurement channels. The practical design limit will often be photodiode capacitance, feedback-network stability, and input-node leakage rather than nominal gain-bandwidth product; use the manufacturer guidance to evaluate compensation and construct a guard ring around the sensitive input.
推薦
Portable Instrumentation Buffering
The MCP6042-I/MS is useful for buffering sensor outputs in portable test and measurement instruments where every microamp of supply current can affect battery life. The dual configuration supports two buffered inputs, a differential stage, or a gain-plus-buffer arrangement in one MSOP package. A 14 kHz gain-bandwidth product suits meters, loggers, and low-frequency measurement channels, while rail-to-rail output improves headroom at 1.8 V, 3.3 V, or 5 V. Confirm the required accuracy and settling behavior with the selected feedback network, and use separate precision references or converters when the measurement specification cannot be met by the amplifier alone.
推薦
推薦產品摘要
工程參考資料,適用於 MCP6042-I/MS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP6042T-E/MS |
|---|---|---|
| Package | 8-pin MSOP | 8-pin MSOP |
| Brand | Microchip Technology | Microchip Technology |
| Number of Channels | 2 channels | 2 channels |
| Gain-Bandwidth Product | 14 kHz | 14 kHz |
| Slew Rate | 3 V/µs | 3 V/µs |
| Typical Operating Current | 600 nA per amplifier | 600 nA per amplifier |
| Input Bias Current | 1 pA typical | 1 pA typical |
| Input Offset Voltage | Less than 3 mV | Less than 3 mV |
| Supply Voltage Range | 1.4 V to 5.5 V | 1.4 V to 5.5 V |
| Input and Output Operation | Rail-to-rail input and output | Rail-to-rail input and output |
| Temperature Ordering Grade | I grade | E grade |
主要差異化特點
- Very low operating current for a dual amplifier (對比MCP6042T-E/MS)
- Low input bias current for high-impedance sources (對比MCP6042T-E/MS)
- Rail-to-rail operation from a 1.4 V supply (對比MCP6042T-E/MS)
- Compact dual-channel MSOP implementation (對比MCP6042T-E/MS)
設計說明
Place the device close to the source and load circuitry, route the two amplifier channels symmetrically, and position input traces away from switching nodes and high-current return paths. For a high-impedance input, use a guard ring driven by the corresponding amplifier output where the application permits. Keep ground returns short and use a solid ground plane. The 8-pin MSOP package saves board area, but its fine pitch still requires aligned land patterns and adequate solder-mask clearance.
Evaluate the complete analog signal path at the minimum available supply voltage. The MCP6042-I/MS operates from 1.4 V to 5.5 V, but rail-to-rail output does not imply zero headroom under every output current or frequency. Confirm the required output level with the load, calculate the amplifier dissipation from the actual supply and output voltages, and ensure the power source can support the application. Add local supply bypass capacitance and route it directly between the supply and ground pins.
Do not treat the 14 kHz gain-bandwidth product as suitable for high-speed waveform amplification. Closed-loop bandwidth, noise gain, capacitive loading, and the 3 V/µs slew rate determine usable large-signal performance. Similarly, the 1 pA input bias current is only meaningful if the PCB, connectors, resistors, and surrounding humidity do not introduce greater leakage. Validate the complete assembly under temperature and humidity conditions relevant to the finished equipment.
Use short, guarded traces for the non-inverting inputs and keep the inverting-input node physically small because parasitic capacitance can alter stability and noise behavior. For transimpedance applications, include the photodiode and feedback capacitance in the stability analysis rather than adding arbitrary capacitance. Confirm settling performance for the intended signal bandwidth and use the manufacturer's application guidance when driving long cables or sampling nodes.
合規資訊
No definitive environmental or automotive qualification statements were available for the exact MCP6042-I/MS ordering code. The MCP6042 family is associated with automotive-qualified variants, but qualification status must be confirmed for the selected manufacturer part number.