MK52DN512ZCMD10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP
MPN： MK52DN512ZCMD10 ✓ 啟用中MK52DN512ZCMD10 概覽
A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems. Within the hierarchy of embedded processors, an MCU is more integrated than an MPU (microprocessor unit) and less powerful than an applications processor; the Kinetis K5x family belongs to NXP's Kinetis portfolio of Arm Cortex-M based MCUs used across industrial, medical, and consumer electronics.
Key features of the MK52DN512ZCMD10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point unit, 512 KB of flash for program storage, and 128 KB of SRAM for data and stack. As a K52 sub-family member of the analog-measurement-focused K50 family, it integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules, reducing external component count in precision measurement signal chains.
The device also provides USB and Ethernet connectivity per its NXP product page, making it suitable for networked instrumentation nodes. Peripherals are clocked from a flexible clock architecture supporting multiple clock sources and a phase-locked loop for core and bus clock generation. Security capabilities noted by NXP support protected code and data handling in industrial deployments.
Typical applications include medical measurement devices such as glucose meters and patient monitoring front ends, industrial metering and data acquisition, and test-and-measurement equipment that benefits from the integrated analog engine. The Ethernet MAC supports connected field devices, while USB enables direct host or device interfaces.
A key design consideration: the 144-ball MAPBGA requires careful PCB stack-up and fanout planning; ball-map routing with via-in-pad or dog-bone fanout on at least four layers is typical, and power integrity for the analog measurement modules demands dedicated clean supplies and solid ground planes.
This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, with all specifications traced to NXP and distributor data as of 2026-10-18.
直接替換替代品，適用於 MK52DN512ZCMD10 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MK52DN512ZCMD10 （相同外形與佔位） — 差異在於 Package, Core Processor, Series, Supply Voltage, Mounting Type.
MK52DN512CMD10
✅ 直接替換聯絡詢價
查看資料表 →MK52DX512ZCMD10
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MK53DN512ZCMD10
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MK51DN512ZCMD10
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MK40DN512ZVMD10
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MK52DN512ZCMD10 最大額定值與電氣特性
| Core Processor | Arm Cortex-M4 |
| Core Size | 32-bit |
| 最大時脈頻率 | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Series | Kinetis K50 (K52 sub-family) |
| 供應電壓 | 3.3 V |
| 封裝 | 144-MAPBGA (13 x 13 mm) |
| Package Code | LFBGA, square, 144 balls |
| 安裝類型 | Surface Mount |
| Terminal Form | Ball |
| Number of Terminals | 144 |
| Temperature Grade | Industrial |
| USB | Yes |
| Ethernet | Yes (MAC) |
| Integrated Analog Engine | Op-amps, trans-impedance amplifiers, high-resolution ADC and DAC modules (K50 family) |
| Security Capabilities | Yes |
MK52DN512ZCMD10 lfbga, square, 144 balls 腳位配置指南
MK52DN512ZCMD10（lfbga, square, 144 balls 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MK52DN512ZCMD10.
請參閱 資料表 以查看完整腳位配置。
典型應用
MK52DN512ZCMD10 適用於 6 應用s: Medical Measurement Devices, Industrial Data Acquisition, Networked Instrumentation with Ethernet, Portable and USB-Connected Instruments, Precision Analog Signal Conditioning, Test and Measurement Equipment.
Medical Measurement Devices
The MK52DN512ZCMD10 fits medical measurement front ends because NXP designed the K50 100 MHz family specifically as an analog measurement engine: integrated operational amplifiers, trans-impedance amplifiers, and high-resolution ADC and DAC modules sit on the same die as the 100 MHz Cortex-M4. In a glucose meter or patient-monitoring sensor board, the MCU's on-chip op-amps condition photodiode or electrode signals directly, and the trans-impedance amplifier converts sensor current to voltage without external discrete amplifiers. The 512 KB flash and 128 KB SRAM host signal-processing firmware and calibration tables, while USB provides data offload to a host PC. Using the integrated engine reduces component count and board area in portable, battery-powered medical instruments.
推薦
Industrial Data Acquisition
In industrial data-acquisition nodes, the MK52DN512ZCMD10's combination of a 100 MHz Cortex-M4 with DSP instructions and the K50 analog measurement engine allows signal conditioning, digitization, and processing on one chip. The on-chip high-resolution ADC modules digitize 4-20 mA or bridge-sensor inputs conditioned by the integrated op-amps, and the 512 KB flash stores multi-channel calibration and logging data. Industrial-grade temperature rating supports panel and factory-floor environments. The USB and Ethernet MAC interfaces let the node stream acquired data to SCADA or local HMIs. Because conditioning, conversion, and processing are integrated, designers save board space and avoid inter-chip analog noise pickup common in discrete front-end designs.
推薦
Networked Instrumentation with Ethernet
The MK52DN512ZCMD10 includes an Ethernet MAC, making it a strong fit for networked instrumentation such as remote sensor gateways and bench-instrument control modules. Paired with an external Ethernet PHY, the MCU serves embedded web pages or streams measurement data over TCP/IP while the 100 MHz Cortex-M4 handles protocol stacks alongside measurement tasks. The 128 KB SRAM provides headroom for socket buffers and the 512 KB flash hosts the stack plus application firmware. The integrated analog measurement engine can simultaneously acquire sensor data, so one chip implements a complete networked measurement endpoint. Compared with discrete MCU-plus-controller designs, this reduces BOM cost and firmware integration effort.
推薦
Portable and USB-Connected Instruments
The USB peripheral on the MK52DN512ZCMD10 enables direct host or device connectivity, which suits portable instruments that charge, configure, or offload data via a USB port. The 100 MHz Cortex-M4 core with hardware floating point performs FFTs and filtering on acquired waveforms, while the K52 analog engine captures signals through its high-resolution ADC. With 512 KB flash, the firmware can support USB device classes (CDC, MSC, HID) plus application code without external memory. Operating from a 3.3 V supply with the Kinetis low-power modes, the device fits battery-operated handheld meters where USB doubles as both the power and communication path, simplifying the power architecture.
推薦
Precision Analog Signal Conditioning
Designs that previously used discrete operational amplifiers and trans-impedance front ends can consolidate them into the MK52DN512ZCMD10. The K52 sub-family's integrated op-amps and trans-impedance amplifiers interface directly to photodiodes, current-loop sensors, and electrode inputs, feeding the on-chip high-resolution ADC. This integration shortens the analog signal path, reducing noise pickup and PCB area. The 100 MHz Cortex-M4 with DSP instructions applies digital filtering and linearization in firmware, and the 12-bit-class DAC modules close control loops or generate stimulus signals for impedance-measurement applications. The result is a compact, single-chip analog measurement system with firmware-configurable gain and filtering.
推薦
Test and Measurement Equipment
Bench and portable test instruments benefit from the MK52DN512ZCMD10's blend of processing power and integrated analog capability. The Cortex-M4's DSP extensions execute windowing and spectral analysis on signals captured by the high-resolution ADC modules, while op-amps on the die scale input signals to ADC range. USB and Ethernet allow the instrument to communicate with host software or networked test setups, and 512 KB flash accommodates a rich command interpreter plus calibration firmware. The 13 x 13 mm 144-MAPBGA package keeps the controller footprint small in dense instrument main boards. Industrial temperature grade suits lab and field test environments alike.
推薦
推薦產品摘要
工程參考資料，適用於 MK52DN512ZCMD10 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MK52DN512CMD10 | MK52DX512ZCMD10 | MK53DN512ZCMD10 | MK51DN512ZCMD10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-MAPBGA (13 x 13 mm) | 144-MAPBGA (13 x 13 mm) - same footprint | 144-MAPBGA (13 x 13 mm) - same | 144-MAPBGA (13 x 13 mm) - same | 144-MAPBGA (13 x 13 mm) - same | 144-MAPBGA (13 x 13 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | Arm Cortex-M4 @ 100 MHz | Arm Cortex-M4 @ 100 MHz | Arm Cortex-M4 @ 100 MHz | Arm Cortex-M4 @ 100 MHz | Arm Cortex-M4 @ 100 MHz | Arm Cortex-M4 @ 100 MHz |
| Flash | 512 KB | 512 KB | 512 KB (+ FlexMemory) | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Analog Measurement Engine | Yes (op-amps, TIA, high-resolution ADC/DAC) | Yes | Yes | Yes | Partial (K51 configuration) | No (segment LCD instead) |
| Ethernet MAC | Yes | Yes | Yes | Yes | Yes | Yes |
| USB | Yes | Yes | Yes | Yes | Yes | Yes |
主要差異化特點
- Integrated analog measurement engine (對比MK10DN512ZVMC10)
- Same silicon without the Z-package suffix (對比MK52DN512CMD10)
- FlexMemory option in same footprint (對比MK52DX512ZCMD10)
設計說明
The 144-ball MAPBGA (13 x 13 mm, 0.8 mm ball pitch class) requires a multilayer PCB - four layers minimum, six preferred - to fan out 144 signals plus power. Use dog-bone or via-in-pad fanout patterns and keep the two inner layers as solid ground and power planes. Escape routing should follow the ball grid diagonals to avoid crosstalk between adjacent traces. Define the BGA land pattern per the package dimensions chapter of the K52 Sub-Family Data Sheet on nxp.com, not from generic footprint libraries.
Supply the MK52DN512ZCMD10 from a clean 3.3 V rail per distributor specifications. Because the K52 integrates analog op-amps, TIAs, and high-resolution ADCs, isolate the analog supply domain with an LC filter or ferrite bead from the digital rail, and follow the datasheet's recommended decoupling: bulk capacitance at each supply ball plus 100 nF ceramics placed as close as possible to the power/ground ball pairs. Poor analog supply isolation shows up as reduced ADC effective resolution - verify ENOB during bring-up.
Pin multiplexing is the most common Kinetis K5x pitfall: most of the 144 balls serve multiple functions (Ethernet RMII, USB, op-amp inputs, timers), so conflicts surface late in design. Build the pin assignment in NXP's pins tooling before committing the schematic. Also confirm the exact ordering suffix - the Z in MK52DN512ZCMD10 selects the 144-MAPBGA; ordering the non-Z MK52DN512CMD10 will deliver a different footprint. Subscribe to NXP PCNs for this part to catch package or die revisions.
合規資訊
Compliance data was not included in the provided verified web data. Consult the NXP product page Quality/Environmental section for MK52DN512ZCMD10 RoHS/REACH declarations.
