NXP Semiconductors

MKE02Z32VFM4 - 40MHz 32KB Cortex-M0+ MCU | NXP

MPN: MKE02Z32VFM4 ✓ 啟用中
3.3 V / 5 V Vdss 32-HVQFN (5x5 mm) Package 40 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKE02Z32VFM4 概覽

The NXP Semiconductors MKE02Z32VFM4 is a 32-bit Arm Cortex-M0+ Kinetis KE02 microcontroller operating up to 40 MHz, with 32 KB of flash memory and 4 KB of SRAM in a 32-HVQFN (5x5 mm) package. The device supports 3.3 V and 5 V operation and combines a compact general-purpose MCU core with analog, timing, control, and communication peripherals.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KE02 family belongs to the hierarchy of 32-bit microcontrollers, Arm Cortex-M embedded processors, and general-purpose embedded semiconductors. Its combination of 5 V tolerance, flash memory, SRAM, analog functions, and automotive or industrial connectivity makes it suitable for compact control systems that need more capability than a basic 8-bit microcontroller.

Key characteristics include a maximum 40 MHz operating frequency, 32 KB of flash, 4 KB of SRAM, and operation from a 3.3 V or 5 V supply. The manufacturer describes the KE02 series as pin compatible with other Kinetis E series devices and the S08P family within compatible package configurations. Its analog and communication resources support applications involving CAN or LIN connectivity, sensor acquisition, motor or actuator control, and general industrial equipment.

The Cortex-M0+ architecture provides a 32-bit instruction set while retaining the simplicity and low power profile expected from a cost-sensitive embedded MCU. Flash memory supports in-system firmware storage, while SRAM provides working memory for control loops and peripheral servicing. The 5x5 mm HVQFN package also supports dense PCB layouts, although its exposed-pad construction requires careful thermal-via and solder-layout design.

Typical uses include automotive body and control modules, industrial sensor hubs, appliance controllers, small motor-control boards, and CAN or LIN network nodes. Designers evaluating this MCU should verify the exact pin assignment, peripheral configuration, clock requirements, and analog limits in the manufacturer datasheet before finalizing a PCB, especially when replacing a device from another family.

For a new board, route the exposed pad to a thermal copper plane with multiple vias and keep sensitive analog inputs away from switching nodes and high-current traces. For a replacement, confirm software startup configuration, pin multiplexing, and communication timing because package fit alone does not guarantee application-level compatibility.

This product overview combines the manufacturer identity, package, memory, clock, voltage, and family information with practical replacement and PCB considerations. It also distinguishes confirmed same-family alternatives from options that require additional engineering review before they can be treated as drop-in devices.

直接替換替代品,適用於 MKE02Z32VFM4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MKE02Z32VFM4 (相同外形與佔位) — 差異在於 Architecture, Exposed Pad, Flash Memory, Package.

NXP Semiconductors
Architecture: 32-bit RISC
Exposed Pad: Yes
Flash Memory: 64 KB
比較對象 MKE02Z32VFM4 →

MKE02Z64VFM4

✅ 直接替換
NXP Semiconductors
📦 32-HVQFN (5x5 mm)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KE02 · ARM Cortex-M0+ · 40 MHz · 64 KB · 64K x 8 bits · 4 KB · 32-bit RISC

聯絡詢價

查看資料表 →

MKE02Z128VFM4

✅ 直接替換 ⚠️ 規格未經驗證
📦 32-HVQFN (5x5 mm)
Flash increases from 32 KB to 128 KB, a 300% increase; core frequency and package format remain unchanged.

📋 參考替代品(不在目錄中)

MKE02Z32VFM4 最大額定值與電氣特性

Product Type 32-bit ARM Cortex-M0+ Microcontroller
Product Family Kinetis KE02
Maximum CPU Frequency 40 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Architecture ARM Cortex-M0+
供應電壓 3.3 V / 5 V
封裝 32-HVQFN (5x5 mm)
安裝類型 Surface Mount
Exposed Pad Present
Communication Support CAN and LIN connectivity
Analog Features Built-in analog features
Target Markets Automotive and industrial control
生命週期狀態 Active

MKE02Z32VFM4 32-hvqfn (5x5 mm) 腳位配置指南

MKE02Z32VFM4(32-hvqfn (5x5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

MKE02Z32VFM4 的 32-hvqfn (5x5 mm) 封裝腳位圖

無詳細腳位定義資料: MKE02Z32VFM4.

請參閱 資料表 以查看完整腳位配置。

典型應用

MKE02Z32VFM4 適用於 6 應用s: Automotive Body Control Module, Industrial Sensor Hub, CAN Network Node, Small Motor and Actuator Controller, Appliance Control Board, LIN Subnetwork Gateway.

🚗

Automotive Body Control Module

The MKE02Z32VFM4 fits compact body-control nodes that need deterministic control, event logging, and vehicle-network connectivity. Its 40 MHz Arm Cortex-M0+ core provides ample processing headroom for sensor filtering and debounce logic, while 32 KB of flash stores application code, calibration values, and communication parameters. The 4 KB SRAM supports protocol buffers and short diagnostic workspaces. A 3.3 V or 5 V operating environment is useful in mixed automotive electronics, and the KE02 family's CAN and LIN connectivity can simplify network attachment. Designers should use the manufacturer pin descriptions to assign wake, interrupt, and communication functions, then validate timing, electrical limits, and qualification requirements for the intended vehicle platform.

🏭

Industrial Sensor Hub

The MKE02Z32VFM4 is appropriate for a compact sensor hub that aggregates analog measurements and forwards status over an industrial network. Its 40 MHz Cortex-M0+ core can execute sampling schedules, filtering, threshold logic, and communication tasks, while the 32 KB flash capacity is suitable for firmware and configuration data. The 4 KB SRAM is adequate for short acquisition and protocol buffers, although designers should account for larger buffering needs before finalizing the memory map. Built-in analog features can simplify signal conditioning around sensors, and the KE02 family's CAN or LIN capability supports network-connected measurement nodes. Keep analog traces short, provide appropriate filtering, and verify the exact ADC and peripheral limits in the manufacturer datasheet.

🌐

CAN Network Node

The MKE02Z32VFM4 can serve as the local controller in a CAN network node where it must handle incoming frames, execute application logic, and report diagnostic or sensor status. The 40 MHz Cortex-M0+ processor provides enough performance for message filtering, periodic scheduling, and protocol processing, while 32 KB of flash is suitable for the communication stack and application firmware. With 4 KB of SRAM, the design should track interrupt-driven buffering and stack requirements carefully. The KE02 family's CAN connectivity and 3.3 V or 5 V operation support both 3.3 V and 5 V system architectures. A production design still needs an external CAN transceiver, protection network, correct termination, and validation of bus timing in the final operating environment.

⚡

Small Motor and Actuator Controller

The MKE02Z32VFM4 suits small motor, relay, or actuator controllers where fast control updates must coexist with communication and fault handling. At up to 40 MHz, the Cortex-M0+ core can execute proportional control loops, debounce logic, travel-limit checks, and diagnostic routines. The 32 KB flash supports compact firmware and stored configuration, while 4 KB of SRAM provides working space for control state and communication buffers. The KE02 family's analog features can assist with feedback sensing, and 3.3 V or 5 V operation offers flexibility across embedded systems. Place power-stage switching devices away from sensitive analog paths, use the exposed pad for thermal dissipation, and confirm timer, comparator, and pin-mux assignments in the manufacturer datasheet.

🔧

Appliance Control Board

The MKE02Z32VFM4 is suitable for appliance electronics that coordinate user inputs, displays, sensors, motors, and safety-related interlocks. Its 40 MHz processing speed supports responsive state-machine control, while 32 KB of flash can hold application firmware, lookup tables, and configuration data. The 4 KB SRAM is suitable for typical control-loop variables and short serial-message buffers, with actual usage dependent on interrupt depth and peripheral concurrency. A 3.3 V or 5 V design gives the product flexibility in consumer and industrial-style equipment. Engineers should use the datasheet pin table to allocate communication, sensing, and control outputs, and should test startup sequences, brownout behavior, and thermal performance across the full input-voltage range.

🧩

LIN Subnetwork Gateway

The MKE02Z32VFM4 can act as a LIN-oriented gateway or supervisory node in a vehicle or industrial subnetwork. The 40 MHz Cortex-M0+ core is well suited to protocol scheduling, data aggregation, and translating between local sensor information and higher-level network messages. Its 32 KB flash provides storage for firmware and message definitions, while 4 KB of SRAM can accommodate bounded protocol buffers. The KE02 family's LIN and CAN connectivity allows designers to combine subnetwork management with backbone communication, and its 5 V-compatible operation simplifies integration where the network uses a 5 V transceiver. Exact transceiver levels, timing, fault handling, and wake behavior must be verified from the NXP datasheet and the selected network transceiver documentation.

What is the MKE02Z32VFM4?
The MKE02Z32VFM4 is an active NXP Semiconductors 32-bit Arm Cortex-M0+ microcontroller in the Kinetis KE02 family. According to the NXP product information and manufacturer datasheet, it operates at up to 40 MHz, provides 32 KB of flash memory and 4 KB of SRAM, and is packaged in a 32-HVQFN measuring 5x5 mm. It targets automotive and industrial control systems requiring CAN or LIN connectivity and integrated analog resources.
What are the key specifications of MKE02Z32VFM4 that engineers should know?
The MKE02Z32VFM4 combines a 40 MHz Arm Cortex-M0+ core, 32 KB of flash, 4 KB of SRAM, 3.3 V or 5 V operation, and a 32-HVQFN 5x5 mm package. According to the NXP manufacturer datasheet, the KE02 family also includes analog features and communication support for CAN and LIN networks. Its exposed-pad construction requires an appropriate thermal-via and copper-plane layout.
Where can I download the MKE02Z32VFM4 datasheet PDF?
The official MKE02Z32VFM4 datasheet is accessible through the NXP product page at https://www.nxp.com/part/MKE02Z32VFM4. The NXP page links to the manufacturer data sheet and provides product status, operating features, environmental information, and change notices. Use the NXP document for authoritative pin descriptions, electrical limits, memory maps, clock settings, and peripheral behavior.
Where can I find the MKE02Z32VFM4 pinout?
The MKE02Z32VFM4 pinout is published in the manufacturer datasheet and package information on the official NXP product page. The device uses a 32-HVQFN package with an exposed pad, so PCB work should follow the exact land pattern, pin-1 orientation, exposed-pad dimensions, and thermal-via recommendations rather than relying on a generic QFN drawing.
What is the MKE02Z32VFM4 supply voltage?
The MKE02Z32VFM4 supports 3.3 V and 5 V operation. According to the NXP manufacturer datasheet and distributor product descriptions, this voltage range is an important feature of the Kinetis KE02 family because it supports both conventional 3.3 V embedded systems and 5 V-compatible industrial or automotive control environments.
How much flash memory and SRAM does the MKE02Z32VFM4 have?
The MKE02Z32VFM4 provides 32 KB of flash memory and 4 KB of SRAM. According to the NXP manufacturer datasheet and the exact-part product listing, the flash is organized as 32K x 8. This capacity suits compact firmware, protocol stacks, parameter storage, and real-time control logic where a higher-memory MCU would add unnecessary cost or board area.
Is the MKE02Z32VFM4 suitable for CAN and LIN applications?
Yes, the MKE02Z32VFM4 is suitable for CAN and LIN network nodes because the Kinetis KE02 family includes automotive and industrial connectivity features. According to the NXP manufacturer product information, the MCU also provides built-in analog resources. Final design work should confirm the required serial interface, connector protection, bus transceiver, timing, and network-management behavior in the datasheet.
MKE02Z32VFM4 vs MKE02Z64VFM4 — which is better?
The MKE02Z32VFM4 is preferable when 32 KB of flash is sufficient, while the MKE02Z64VFM4 offers twice the flash capacity for larger firmware, diagnostics, or protocol data. According to the NXP product information, both belong to the KE02 family, but the replacement decision must also account for firmware compatibility, exposed-pad layout, pin multiplexing, and any software assumptions about available memory.
When should I choose MKE02Z32VFM4 over a larger-memory MCU?
Choose the MKE02Z32VFM4 when a 40 MHz Cortex-M0+ core, 32 KB of flash, and 4 KB of SRAM are sufficient for the control task. It is a practical choice for compact CAN or LIN nodes, appliance controllers, and industrial sensing modules. Select a higher-memory MCU instead when firmware growth, extensive logging, large protocol tables, or complex application requirements make the available 32 KB too restrictive.
Is the MKE02Z32VFM4 suitable for automotive and industrial control?
The MKE02Z32VFM4 is designed for automotive and industrial control applications according to the NXP product information. Its relevant attributes include 3.3 V or 5 V operation, 40 MHz performance, 32 KB of flash, analog functions, and CAN or LIN connectivity. Vehicle-production use should additionally require confirmation of the exact part's AEC-Q100 status and all device-specific qualification limits.
What can replace the MKE02Z32VFM4?
The closest confirmed same-family replacement is the MKE02Z64VFM4, which retains the Kinetis KE02 architecture while increasing flash from 32 KB to 64 KB. According to NXP family information, KE02 devices can be pin compatible within compatible Kinetis E series packages, but firmware, memory assumptions, and peripheral configuration must still be reviewed before treating the replacement as drop-in.
Can an MKE02Z64VFM4 replace the MKE02Z32VFM4?
An MKE02Z64VFM4 can be a candidate replacement because it is a 32-HVQFN KE02-family device with more flash memory. The NXP family information supports pin compatibility across compatible Kinetis E series configurations, while its 64 KB flash provides twice the target's 32 KB capacity. Verify the official pinout, exposed-pad pattern, clock settings, and software memory map before production use.
Where to buy MKE02Z32VFM4 online?
Use the Request a Quote form on this page to request MKE02Z32VFM4 availability, order quantities, and current commercial terms. The manufacturer lists the exact part as active, and distributor listings identify the 32-HVQFN device. A written quote establishes current stock, lead time, and authorized-channel availability without embedding a potentially stale price in the product description.
What is the price of MKE02Z32VFM4?
The current MKE02Z32VFM4 price is obtained through the Request a Quote form on this page because commercial pricing and quantity availability can change. The structured listing information is maintained separately from the technical description so the page does not present a stale figure. Request the quantity break, packaging, lead time, and lifecycle confirmation with the quote.
What is the lead time and stock status for MKE02Z32VFM4?
Current MKE02Z32VFM4 stock and lead time should be confirmed through the Request a Quote form on this page. NXP lists the component as active, while distributor search listings indicate market availability, but those statements do not guarantee a specific quantity at a specific date. Include your required quantity, date code preference, and target tray or reel configuration in the request.

工程參考資料,適用於 MKE02Z32VFM4 — 比較、設計指引及合規資訊。

選型指南

Choose the MKE02Z32VFM4 for a compact automotive or industrial controller whose firmware comfortably fits within 32 KB of flash and whose working data remains within the 4 KB SRAM budget. Its 40 MHz Cortex-M0+ core, 3.3 V or 5 V operation, analog resources, and CAN or LIN connectivity make it a strong fit for sensor hubs, appliance controllers, body-control nodes, and small actuator controllers. Choose the MKE02Z64VFM4 when application firmware, diagnostics, logging, or protocol data require twice the flash while retaining the same family architecture and package format. Choose the MKE02Z128VFM4 when future firmware growth or a large fixed lookup table makes 128 KB more appropriate. For any replacement, verify the official pinout, exposed-pad land pattern, peripheral availability, clock configuration, and software memory map rather than relying on package compatibility alone.

與替代品比較

參數 本產品 MKE02Z64VFM4 MKE02Z128VFM4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm)
Product Family Kinetis KE02 Kinetis KE02 Kinetis KE02
CPU Architecture ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 40 MHz 40 MHz 40 MHz
Flash Memory 32 KB 64 KB 128 KB
SRAM 4 KB 4 KB 4 KB
Supply Voltage 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V
Communication Features CAN and LIN connectivity CAN and LIN connectivity CAN and LIN connectivity
Target Applications Automotive and industrial control Automotive and industrial control Automotive and industrial control

主要差異化特點

  • Balanced memory and connectivity for compact control nodes (對比MKE02Z64VFM4)
  • Lower flash requirement without changing the CPU architecture (對比MKE02Z128VFM4)
  • 5 V-capable embedded control in a compact package (對比MKE02Z64VFM4)

設計說明

Treat the 32-HVQFN footprint as a thermal and electrical layout problem, not only a routing problem. Follow the NXP land pattern for exposed-pad dimensions and place multiple thermal vias within the pad area while respecting the manufacturer's soldering and via-keepout guidance. Keep the via field under the pad electrically consistent with the intended ground connection and avoid placing sensitive signal traces directly beneath the exposed region.

Separate analog, communication, and digital return paths to reduce injected noise. Route communication and switching-node signals away from sensor inputs, keep ground returns short, and use a continuous ground reference beneath the MCU wherever practical. The analog and timer functions are useful near the device, but their reference and return paths still require disciplined partitioning to avoid coupling from external power stages.

Do not assume that a larger-flash KE02 device is a drop-in software replacement merely because its package matches. Review flash organization, startup code, linker placement, peripheral availability, pin multiplexing, and any code that depends on exact memory size. Also confirm the exposed-pad connection and pin-1 orientation against the manufacturer land pattern before releasing a replacement PCB.

Apply the manufacturer's recommended input and bypass-capacitor network directly to the intended power pins, and validate operation across the complete 3.3 V or 5 V design range. Keep the supply loop compact so switching-current paths do not share a narrow trace segment with sensitive ground returns. Account for startup current, peripheral loading, and voltage tolerance when defining the system power architecture.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

NXP identifies the part as active and targets automotive and industrial applications. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for this orderable MPN should be confirmed from the manufacturer product page or declaration documents before qualification.

相關搜尋

MKE02Z32VFM4 datasheet MKE02Z32VFM4 datasheet pdf MKE02Z32VFM4 pinout MKE02Z32VFM4 footprint NXP MKE02Z32VFM4 MKE02Z32VFM4 32KB flash 4KB SRAM MKE02Z32VFM4 40MHz Cortex-M0+ MKE02Z32VFM4 32-HVQFN MKE02Z32VFM4 equivalent MKE02Z32VFM4 replacement MKE02Z32VFM4 vs MKE02Z64VFM4 MKE02Z32VFM4 automotive application MKE02Z32VFM4 CAN LIN controller MKE02Z32VFM4 price MKE02Z32VFM4 stock and lead time

相關元件與詞彙

NXP Semiconductors MKE02Z32VFM4 MKE02Z64VFM4 MKE02Z128VFM4 Kinetis KE02 Kinetis E series S08P ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller semiconductor 3.3 V operation 5 V operation 40 MHz 32 KB flash memory 4 KB SRAM CAN LIN analog-to-digital control 32-HVQFN QFN package family surface-mount package exposed pad automotive control industrial control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情