Texas Instruments

OPA743UA - 12 V, 7 MHz CMOS Op Amp | Texas Instruments

MPN: OPA743UA ✓ 啟用中
12 V Vdss 1.1 mA Id 8-pin SOIC Package
MOQ: 1 |

OPA743UA 概覽

The Texas Instruments OPA743UA is a single, 12 V, 7 MHz CMOS operational amplifier with rail-to-rail input and output, supplied in an 8-pin SOIC package. It operates from a single supply up to 12 V or from dual supplies up to ±6 V, delivers a 10 V/µs slew rate, and consumes 1.1 mA of quiescent current. These characteristics place it between precision and high-speed amplifier families: 84 dB full-scale CMRR supports instrumentation work, while the 7 MHz gain-bandwidth product and 10 V/µs slew rate provide useful bandwidth for filtering and signal conditioning.

A CMOS operational amplifier is a voltage-controlled, high-input-impedance amplifier that uses complementary metal-oxide-semiconductor transistors. Within the amplifier hierarchy, the OPA743 belongs to the rail-to-rail I/O CMOS op-amp class, combining low quiescent current with wideband signal handling. Rail-to-rail input operation accepts signals near either supply rail, while the rail-to-rail output stage can approach the output limits under suitable load and output-voltage conditions.

The main features of the OPA743UA include a 7 MHz gain-bandwidth product, 10 V/µs slew rate, 1.1 mA quiescent current, and 84 dB full-scale common-mode rejection ratio. The 12 V maximum single-supply rating supports operation from common laboratory and industrial rails such as 3.3 V, 5 V, and ±5 V, provided the amplifier is not operated beyond its absolute maximum ratings. The low quiescent current makes the device suitable for portable, battery-powered, and low-power sensing systems.

OPA743UA is specified as a single amplifier rather than a dual or quad device. Its wideband CMOS architecture is useful in sensor interfaces, current-to-voltage conversion, audio paths, active filters, and general-purpose voltage amplification. The 8-pin SOIC footprint allows conventional surface-mount assembly and provides a small, readily available package for mixed-signal designs.

In actual circuits, the input common-mode range, output swing, load capacitance, and stability requirements must be checked against the operating conditions rather than inferred from the headline bandwidth. Decoupling capacitors should be placed close to the supply pins, and the unused input pin must be biased so the amplifier does not saturate. The exact noise, offset, input-current, and temperature-range details should be taken from the manufacturer datasheet before releasing a production design.

This page combines the manufacturer product information, distributor package details, application-oriented engineering guidance, and a parameter comparison framework that goes beyond a basic distributor listing. It is intended to help engineers select the amplifier, plan the PCB, and identify when a rail-to-rail single-supply CMOS amplifier is the correct architectural choice.

直接替換替代品,適用於 OPA743UA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

OPA743UA 最大額定值與電氣特性

Amplifier Type Single wideband CMOS operational amplifier
Number of Circuits 1 circuit
Maximum Single-Supply Voltage 12 V
Dual-Supply Voltage Range ±6 V
Gain-Bandwidth Product 7 MHz
Slew Rate 10 V/µs
靜態電流 1.1 mA
Full-Scale CMRR 84 dB
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Process Technology CMOS
封裝 8-pin SOIC
Package Type SO-8 surface mount
安裝類型 Surface mount

OPA743UA 腳位配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
腳位 1 NC — Not connected
腳位 2 IN- — Inverting input
腳位 3 IN+ — Non-inverting input
腳位 4 V- — Negative supply connection
腳位 5 NC — Not connected
腳位 6 OUT — Amplifier output
腳位 7 V+ — Positive supply connection
腳位 8 NC — Not connected

典型應用

OPA743UA 適用於 6 應用s: Sensor Signal Conditioning, Precision Active Filtering, Low-Power Portable Instrumentation, Audio Preamplification, Industrial Control Signal Interface, Data Acquisition Front End.

🧩

Sensor Signal Conditioning

The OPA743UA suits sensor front ends that require a wider bandwidth than a precision-only amplifier provides. Its 7 MHz gain-bandwidth product and 10 V/µs slew rate preserve fast sensor transitions, while the 1.1 mA quiescent current supports power-constrained designs. Rail-to-rail input operation is useful when the transducer output moves close to either supply rail. Use the manufacturer's electrical-characteristics tables to confirm input bias current, offset, noise, and common-mode limits for the particular sensor impedance.

🔧

Precision Active Filtering

The OPA743UA is appropriate for active filters and measurement amplifiers where a 7 MHz bandwidth exceeds the signal bandwidth. Rail-to-rail I/O increases usable signal range on single-supply systems, and the 10 V/µs slew rate helps maintain low distortion as the filter output changes. Compensation and stability depend on noise gain, load capacitance, and feedback topology, so verify those conditions against the manufacturer datasheet and keep feedback traces short.

📱

Low-Power Portable Instrumentation

The OPA743UA suits portable measurement equipment because its 1.1 mA quiescent current limits supply demand while retaining a 7 MHz gain-bandwidth product. Rail-to-rail input and output operation allows operation from low single-supply rails with a small usable signal range. The amplifier is useful for conditioning low-frequency sensor signals, buffer stages, and conversion front ends. Confirm the exact temperature grade and total noise performance before using it in a precision battery-powered analyzer.

🎧

Audio Preamplification

The OPA743UA can amplify low-level audio and microphone signals when the design requires more bandwidth than a general-purpose amplifier. Its rail-to-rail I/O allows operation near the supply rails, and the 10 V/µs slew rate supports moderately demanding signal transitions. Evaluate THD+N, output-noise voltage, and gain-bandwidth behavior at the intended audio frequency from the manufacturer datasheet. Bias a single-supply input near mid-rail to preserve symmetrical output swing.

🏭

Industrial Control Signal Interface

The OPA743UA can condition low-level analog control signals in industrial systems that need fast response and low quiescent power. Its 12 V capability accommodates common 12 V-derived analog rails, while rail-to-rail input and output improve range utilization. Use it for interface buffering, transducer amplification, and active gain stages rather than driving long capacitive loads. Confirm operating temperature, supply tolerance, and transient behavior against the manufacturer datasheet for factory equipment.

🖥️

Data Acquisition Front End

The OPA743UA works as a buffer or gain stage ahead of higher-resolution converters in mixed-signal acquisition systems. The 7 MHz bandwidth provides margin for fast settling, while 1.1 mA quiescent current avoids imposing a large standing load on analog rails. Choose resistor ratios that keep signal swing within the rail-to-rail operating region, and place the amplifier close to the converter input to minimize capacitance and noise pickup. Check settling behavior for the selected closed-loop gain.

What is the operating voltage range of OPA743UA?
The OPA743UA operates from a single supply up to 12 V or from dual supplies up to ±6 V. According to the Texas Instruments OPA743 manufacturer datasheet, the amplifier is designed for a wide supply range and rail-to-rail input and output operation. Common implementation rails include 3.3 V, 5 V, and ±5 V, but designers must verify signal amplitude, output load, and absolute maximum limits for the selected configuration.
What is the gain-bandwidth product and slew rate of OPA743UA?
The OPA743UA has a 7 MHz gain-bandwidth product and a 10 V/µs slew rate. These speed figures are listed in the Texas Instruments OPA743 manufacturer datasheet and identify the device as a wideband CMOS amplifier. Closed-loop bandwidth depends on the selected noise gain, while large-signal settling and output drive depend on slew rate and output-load conditions, so the actual usable bandwidth in a filter or instrumentation stage is lower than 7 MHz.
Where can I download the OPA743UA datasheet PDF?
The official OPA743 documentation is available from the Texas Instruments product page at https://www.ti.com/product/OPA743, which links to the manufacturer datasheet and ordering information. The OPA743UA ordering code denotes the 8-pin SOIC package. Use the pin-description table and electrical-characteristics tables in that document when assigning PCB nets, checking common-mode range, and confirming noise and offset limits.
Where is the OPA743UA pinout located?
The OPA743UA pinout is shown in the Texas Instruments OPA743 manufacturer datasheet. The 8-pin SOIC configuration places the non-inverting input at pin 3, the inverting input at pin 2, the output at pin 6, the negative supply at pin 4, and the positive supply at pin 7. Consult the datasheet pin-description table for the complete sequence and for the designated no-connect positions before routing a board.
Is the OPA743UA suitable for 5 V single-supply operation?
Yes, the OPA743UA is suitable for 5 V single-supply operation because its specified supply capability extends to 12 V and its input and output stages are rail-to-rail. For a 5 V system, confirm the allowable input and output swing with the required load and the device's operating temperature. Bias the non-inverting input around mid-supply when the source cannot provide a defined common-mode voltage.
What can replace the OPA743UA?
The closest replacement must be a pin-compatible single amplifier in the 8-pin SOIC footprint with comparable bandwidth, slew rate, supply range, and rail-to-rail behavior. Cross-reference records identify an Analog Devices pin-to-pin alternative for the OPA743 family, but the specific orderable suffix must be verified before substitution. Confirm offset, bias current, noise, stability, and package dimensions against the manufacturer datasheet rather than relying only on headline bandwidth.
What is the best Analog Devices equivalent for OPA743UA?
The OPA743 family cross-reference identifies an Analog Devices pin-to-pin replacement, but the listing does not establish the exact 8-pin SOIC orderable suffix. A valid substitution must provide the same SOIC-8 pin arrangement and comparable 12 V maximum supply, 7 MHz-class bandwidth, 10 V/µs-class slew rate, and rail-to-rail I/O performance. Use the manufacturer's cross-reference and pin tables to confirm the exact device before treating it as a drop-in replacement.
OPA743UA vs OPA743 in an 8-pin SOIC design - what changes?
OPA743UA identifies the single-amplifier OPA743 in an 8-pin SOIC package, while other OPA743 family order codes change the package or channel count. The family members therefore are not automatically interchangeable. A valid comparison must check the SOIC-8 footprint, single-amplifier function, supply rating, pin names, electrical limits, and temperature grade. The manufacturer ordering table identifies the available package and channel variants.
When should I choose the OPA743UA over a precision op amp?
Choose the OPA743UA when a design needs a 7 MHz gain-bandwidth product, 10 V/µs slew rate, rail-to-rail I/O, and 1.1 mA quiescent current in one amplifier. A precision op amp may be preferable when offset, input bias current, noise, and drift dominate the measurement. The OPA743UA favors bandwidth and moderate power over precision-focused specifications, making it appropriate for sensor conditioning, filtering, and general signal amplification.
Is OPA743UA suitable for audio and low-noise signal conditioning?
The OPA743UA can be used for low-frequency audio and general analog signal-conditioning paths because it is a wideband, rail-to-rail CMOS amplifier with a 10 V/µs slew rate. However, its exact input-voltage noise, output-noise voltage, THD+N, and frequency-dependent distortion must be checked in the manufacturer datasheet. Audio suitability depends on the required noise floor, channel count, bandwidth, and output load.
How should an unused OPA743UA input pin be connected?
The unused input should be biased to a valid common-mode voltage close to the signal path rather than left floating. Connecting the unused inverting input to the inverting input of the active stage, or to a defined mid-supply reference, prevents input-stage saturation and reduces instability risk. The correct bias method depends on the feedback topology, and the final connection should be checked against the manufacturer pin-description and application guidance.
What supply-decoupling layout does OPA743UA require?
Place the supply-decoupling capacitor as close as practical to the OPA743UA positive-supply pin, and connect the package ground reference to a low-impedance ground plane. Follow the manufacturer datasheet recommendation for the capacitance value and placement. Keep sensitive input traces away from switching nodes and the supply entry point, and route the output separately from the input to limit parasitic feedback.
What is the power consumption of OPA743UA?
The OPA743UA quiescent current is 1.1 mA, according to the Texas Instruments OPA743 manufacturer datasheet. Supply power therefore follows the relationship P = IQ × VS; for example, a 5 V operating rail corresponds to approximately 5.5 mW at the quiescent operating point. Actual consumption rises with output current and dynamic activity, so thermal design should use the measured or worst-case operating load.
Does the OPA743UA have rail-to-rail input and output?
Yes, the OPA743UA is specified with rail-to-rail input and rail-to-rail output behavior. According to the Texas Instruments OPA743 manufacturer datasheet, this allows the amplifier to accept input signals near the supply limits and to swing its output toward the rails. Practical output limits still depend on load current and supply voltage, so use the datasheet output-swing curves rather than assuming the output reaches exactly 0 V or the positive rail.
How do I check whether OPA743UA is currently in stock?
Current OPA743UA inventory and lead time should be confirmed through the Request a Quote form on this page. The manufacturer product page provides lifecycle and ordering information, while the distributor listing identifies the 8-pin SOIC configuration. Supply status can change by region, package quantity, and manufacturing schedule, so request a written quotation with the required quantity and date before committing the quantity to a production schedule.

工程參考資料,適用於 OPA743UA — 比較、設計指引及合規資訊。

選型指南

Choose the OPA743UA when a design needs a single amplifier combining a 7 MHz gain-bandwidth product, 10 V/µs slew rate, rail-to-rail I/O, and low 1.1 mA quiescent current. It is a strong fit for 3.3 V or 5 V portable instrumentation, active filtering, sensor conditioning, and moderate-bandwidth audio paths. Select a precision amplifier instead when very low offset, bias current, noise, or drift is the dominant requirement. Before substituting another part, require an exact SOIC-8 pin-compatible device with comparable supply range, bandwidth, slew rate, and output drive. The available cross-reference information identifies a pin-to-pin Analog Devices alternative within the OPA743 family but does not establish its orderable suffix, so the exact MPN must be verified. Also note that dual and quad OPA743-family amplifiers cannot replace this single-channel device directly because their channel counts and package assignments differ.

與替代品比較

參數 本產品
Package 8-pin SOIC
Brand Texas Instruments
Maximum Single-Supply Voltage 12 V
Dual-Supply Voltage Range ±6 V
Gain-Bandwidth Product 7 MHz
Slew Rate 10 V/µs
Quiescent Current 1.1 mA
Full-Scale CMRR 84 dB
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail

設計說明

Place the supply-decoupling capacitor directly beside the positive-supply pin and route the ground return through a low-impedance plane. Keep the non-inverting input, inverting input, and output traces away from the supply capacitor and switching-current paths. For a single-supply circuit, bias the input near mid-supply so the rail-to-rail output stage can swing symmetrically, and use the manufacturer datasheet's recommended decoupling value rather than substituting an arbitrary value.

Do not treat the rail-to-rail designation as an unlimited output-swing guarantee. Output-current demand, temperature, supply voltage, and load capacitance determine how closely the output can approach either rail. Likewise, a single-supply input centered near ground may reduce available linear range. Confirm common-mode and output-swing limits in the manufacturer datasheet, and verify stability at the actual noise gain and capacitive load before releasing the PCB.

The 7 MHz gain-bandwidth product makes the OPA743UA fast enough for short settling windows, but closed-loop performance depends on the selected gain and feedback network. Keep the feedback loop compact, avoid routing the output back beside the input, and terminate unused inputs at a defined common-mode voltage. If the stage drives a cable, ADC input, or other capacitive load, add an isolation resistor near the amplifier and verify the resulting response on test hardware.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations were not identified in the available manufacturer and distributor records. The OPA743UA is an analog operational amplifier and is not an AEC-Q100-qualified automotive device.

相關搜尋

OPA743UA datasheet OPA743UA specifications OPA743UA pinout OPA743UA SOIC-8 footprint Texas Instruments OPA743UA OPA743UA drop-in replacement OPA743UA equivalent amplifier OPA743UA cross reference OPA743UA 7MHz op amp OPA743UA application circuit OPA743UA price OPA743UA stock

相關元件與詞彙

Texas Instruments OPA743 OPA743UA CMOS operational amplifier single amplifier rail-to-rail input rail-to-rail output gain-bandwidth product slew rate quiescent current common-mode rejection ratio SOIC-8 surface mount signal conditioning active filter sensor interface audio preamplifier data acquisition single-supply operation dual-supply operation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情