NXP Semiconductors

PCA9525D - 2-Wire Bus Buffer, 5.5V | NXP Semiconductors

MPN: PCA9525D ✗ 停產
2.7 V to 5.5 V Vdss Plastic small-outline package Package Up to 1000 kHz Speed
MOQ: 1 |

PCA9525D 概覽

The NXP Semiconductors PCA9525D is a CMOS simple 2-wire bus buffer with a 2.7 V to 5.5 V operating-voltage range, support for I2C-bus systems operating up to 1000 kHz, and an 8-terminal small-outline package. It is intended for buffering two-wire buses such as I2C, SMBus, DDC, and PMBus, while its direction and enable controls support clock-direction reversal and staged system bring-up. The package measures 4.9 mm by 3.9 mm by 1.75 mm and uses a 1.27 mm lead pitch.

A 2-wire bus buffer is an interface IC that regenerates and isolates bus signals between a controller and downstream devices. It belongs to the broader hierarchy of bus buffers and line drivers, within interface ICs and semiconductor signal-conditioning products. Unlike a general-purpose logic buffer, this device is designed around the electrical and signaling requirements of clock-and-data pairs. The DIR input can reverse the direction of the unidirectional clock signal, allowing controller placement on either side of the buffered segment, while EN allows a bus section to remain isolated.

The PCA9525D operates across 2.7 V to 5.5 V and is specified for an industrial temperature range of -40°C to 85°C. Its 1000 kHz I2C-bus operating capability makes it appropriate for moderate-speed embedded systems that require a separate buffering stage rather than direct controller-to-device wiring. Its 8-terminal surface-mount format also keeps the component compact compared with discrete buffers and larger interface packages.

Internally, the device provides two buffered signal paths for a two-wire bus arrangement. The direction control and enable functions add system-level flexibility, but they also require careful truth-table and startup analysis. The bus voltage must remain compatible with every connected device, and the buffer must not be treated as a general level translator unless its operating limits are satisfied.

Typical uses include I2C sensor aggregation, SMBus power-management interfaces, DDC connections in display equipment, and PMBus communication in modular power systems. It can also isolate a bus section during initialization, allowing devices to be brought online successively. These functions improve topology flexibility but do not remove the need for correct pull-up placement and signal-integrity review.

When laying out the PCA9525D, keep the buffered clock and data traces short, route them as a controlled pair, and place pull-up resistors at positions recommended for the connected bus. Confirm the DIR and EN states during reset so the controller cannot contend with downstream devices. For designs that need level translation, hot-plug isolation, or higher bus rates, select an interface IC explicitly specified for those requirements rather than assuming generic pin compatibility.

This page organizes the PCA9525D specifications, lifecycle position, pinout, bus applications, and compatible alternatives into one engineering reference. It also highlights practical differences among buffer functions so obsolete or constrained designs can be migrated without confusing directional buffering, voltage translation, or multi-channel repeater capabilities.

直接替換替代品,適用於 PCA9525D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PCA9525D (相同外形與佔位) — 差異在於 Direction Control, Function, Maximum Bus Frequency, Package, RoHS Status.

NXP Semiconductors
Function: Hot-swappable level translating I2C-bus repeater / buffer
Maximum Bus Frequency: 400 kHz (I2C fast mode)
Package: SO-8 (SOP, 3.90 mm, SOT96-1, MS-012)
比較對象 PCA9525D →
NXP Semiconductors
Direction Control: Internal (no DIR pin required)
Function: Dual bidirectional I²C-bus buffer / ReDriver
Maximum Bus Frequency: 1 MHz
比較對象 PCA9525D →

PCA9510AD,118

✅ 直接替換
📦 SO8
Parametric equivalent listed for obsolete PCA9525D,118; operating-voltage and control-logic equivalence must be confirmed in the manufacturer data sheets.

📋 參考替代品(不在目錄中)

PCA9515AD,118

✅ 直接替換
📦 SO8
Compared directly with PCA9525D,118 as an SO8 interface IC; DIR and EN functional differences require pin-level review.

📋 參考替代品(不在目錄中)

PCA9600D,118

✅ 直接替換
NXP Semiconductors
📦 SOP8
Dual bidirectional I²C-bus buffer / ReDriver · 2 (SDA + SCL) · 1 MHz · 4000 pF · 2.5 V to 15 V · Standard, Fast, Fast-mode Plus (Fm+) I²C-bus · Internal (no DIR pin required) · Non-latching

聯絡詢價

查看資料表 →

PCA9508D,118

✅ 直接替換
NXP Semiconductors
📦 SOP8
Hot-swappable level translating I2C-bus repeater / buffer · 1 channel (SDA/SCL pair, bidirectional) · 2.7 V to 5.5 V · 400 kHz (I2C fast mode) · I2C-bus, SMBus · Zero static voltage offset · Yes (drivers enabled only when bus idle, VCC(A) > 0.8 V, VCC(B) > 2.5 V)

聯絡詢價

查看資料表 →

PCA9525,118

✅ 直接替換
📦 SO8
Same 2.7 V to 5.5 V operating range and 1000 kHz bus class as PCA9525D; ordering-code and lifecycle details must be confirmed.

📋 參考替代品(不在目錄中)

PCA9525D 規格

Device Type Simple 2-wire bus buffer
Operating Voltage Range 2.7 V to 5.5 V
Maximum Supply Voltage 5.5 V
I2C-Bus Operating Frequency Up to 1000 kHz
Temperature Grade Industrial
工作溫度範圍 -40°C to +85°C
Terminal Count 8 terminals
Package Type Plastic small-outline package
Package Body Length 4.9 mm
Package Body Width 3.9 mm
Package Body Height 1.75 mm
Lead Pitch 1.27 mm
安裝類型 Surface mount
Packing Option SO8 reel pack
Direction Control DIR input
Bus Isolation Control EN input
RoHS 狀態 unknown
REACH Status unknown

PCA9525D 腳位配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
腳位 1 VDD — Positive supply voltage
腳位 2 EN — Bus enable input
腳位 3 A0 — Address or configuration input
腳位 4 A1 — Address or configuration input
腳位 5 VSS — Ground reference
腳位 6 SCL — Serial clock bus connection
腳位 7 SDA — Serial data bus connection
腳位 8 DIR — Clock-direction control input

典型應用

PCA9525D 適用於 6 應用s: I2C Sensor Aggregation, SMBus Power Management Interface, DDC Display Interface Buffering, PMBus Module Isolation, Industrial Controller Bus Segmentation, Embedded Display and Sensor Bridge.

🧩

I2C Sensor Aggregation

The PCA9525D fits an I2C sensor hub where a controller must connect to multiple sensors while maintaining a defined bus segment. Its 2.7 V to 5.5 V operating range supports common embedded logic levels, and its 1000 kHz capability accommodates fast-mode-plus systems when rise-time and capacitance limits are satisfied. Place the device between the controller and downstream sensors, route SCL and SDA as a matched pair, and size the pull-up resistors for the bus capacitance. DIR should place the controller on the intended side of the buffered segment, while EN can isolate that segment during startup. Validate every peripheral for clock stretching and contention behavior.

⚡

SMBus Power Management Interface

The PCA9525D is suitable for an SMBus management path connecting a supervisory controller to power-system components. The 2.7 V to 5.5 V supply range accommodates common embedded rails, and the buffer supports bus operation up to 1000 kHz for systems that exceed standard-speed SMBus timing. Position the buffer between the host controller and management devices, and verify that all connected devices support the selected voltage. The EN input can prevent partially powered devices from driving the segment during power sequencing, while DIR allows the controller to be placed on either side. Check timeout, clock stretching, and arbitration requirements in the complete system specification.

📺

DDC Display Interface Buffering

The PCA9525D can buffer a Display Data Channel between a graphics source and a display controller. Its 1000 kHz bus capability provides margin for typical DDC implementations, while DIR and EN provide useful control over source-side and downstream-device startup sequencing. Keep the buffered channel short and preserve the SCL-to-SDA geometry to limit skew and ringing. Confirm that the source and display use compatible voltage levels, that the relevant DDC lines are included on both sides of the buffer, and that the pull-up network remains correctly placed for the segmented topology. Review timing against the display's DDC implementation rather than relying only on the 1000 kHz headline specification.

🔋

PMBus Module Isolation

The PCA9525D is applicable to a PMBus arrangement where a host controller communicates with multiple power modules across a segmented bus. The device's EN function can isolate the downstream section while power rails are settling, reducing the chance that a partly powered module will contend with the controller. Its operating range of 2.7 V to 5.5 V and 1000 kHz bus support suit many embedded power-management systems. Use DIR to establish the intended controller location, and verify that the PMBus implementation does not require features outside the buffer's clock and data functions. Analyze arbitration, timeout behavior, pull-up placement, and module isolation requirements before production release.

🏭

Industrial Controller Bus Segmentation

The PCA9525D supports industrial embedded designs that divide a shared two-wire bus into controlled segments. Its -40°C to +85°C industrial temperature specification is suitable for many factory equipment, environmental monitoring, and control applications, while the 8-terminal SO8 package supports compact board layouts. EN can hold a downstream segment disabled until its local supply is stable, and DIR provides flexibility in controller placement. The design must still account for normal I2C timing, bus capacitance, pull-up resistance, and device-specific isolation behavior. Avoid using the buffer as a substitute for a voltage translator unless the connected devices have compatible logic levels.

📱

Embedded Display and Sensor Bridge

The PCA9525D can bridge an embedded processor to a display or sensor cluster when a clean segmented bus improves signal integrity or startup control. Its 1000 kHz operating capability is appropriate for many moderate-speed peripherals, and DIR allows the processor to be connected on either side of the buffered path. EN provides an orderly way to isolate downstream devices during initialization. Route the bus as a compact pair with a continuous ground reference, place decoupling close to the supply pins, and verify that pull-up placement does not create an unintended parallel network across the buffer. Confirm that no peripheral uses incompatible voltage levels or unsupported clock-stretching behavior.

推薦產品摘要

PCA9515APWR Texas Instruments 用於: I2C Sensor Aggregation, DDC Display Interface Buffering, Industrial Controller Bus Segmentation PCA9525D,118 Orderable catalog form of the target device 用於: I2C Sensor Aggregation, SMBus Power Management Interface, PMBus Module Isolation PCA9600D NXP Semiconductors 用於: SMBus Power Management Interface, DDC Display Interface Buffering, Embedded Display and Sensor Bridge PCA9508D Related dual-supply bus interface 用於: PMBus Module Isolation PCA9510AD,118 Listed parametric equivalent 用於: Industrial Controller Bus Segmentation PCA9515AD,118 Alternative two-wire interface IC 用於: Embedded Display and Sensor Bridge
What is the NXP PCA9525D?
The NXP PCA9525D is a CMOS simple 2-wire bus buffer designed for I2C, SMBus, DDC, PMBus, and similar clock-and-data interfaces. According to the NXP product information, it provides DIR control for reversing the unidirectional clock direction and EN control for isolating bus sections. The device operates from 2.7 V to 5.5 V and is packaged in an 8-terminal small-outline package measuring 4.9 mm by 3.9 mm by 1.75 mm.
What is the operating voltage of PCA9525D?
The PCA9525D operates from 2.7 V to 5.5 V, with 5.5 V listed as the maximum supply voltage. The NXP product information identifies the device as a simple 2-wire bus buffer for I2C-bus, SMBus, DDC, and PMBus-style systems. Every device on the buffered segment must use a compatible logic level, and the bus pull-up network must be sized for the actual supply voltage rather than the regulator output alone.
What is the maximum I2C-bus speed of PCA9525D?
The PCA9525D supports I2C-bus operation up to 1000 kHz. This figure identifies the buffer as suitable for the 1 MHz class of two-wire bus systems rather than only standard-speed 100 kHz or fast-mode 400 kHz operation. Actual system throughput also depends on bus capacitance, pull-up resistance, clock stretching, signal integrity, and every peripheral placed on the buffered segment.
Where can I download the PCA9525D datasheet PDF?
The PCA9525D datasheet and supporting documents are available from the NXP product page at https://www.nxp.com/products/PCA9525D. Use the manufacturer data sheet for the complete pin description, electrical limits, timing characteristics, DIR and EN behavior, and recommended application circuits. The NXP page also links the I2C-bus specification and user manual, which are useful when evaluating the buffer within a complete bus design.
Where can I find the PCA9525D pinout?
The PCA9525D pinout is documented in the manufacturer data sheet and corresponds to the 8-terminal small-outline package. The pins provide the device supply and ground, DIR and EN control inputs, address-related configuration inputs, and the buffered SCL and SDA connections. Assign PCB tracks from the pin-description table in the NXP data sheet, and preserve the exposed package orientation and lead numbering shown there.
Is PCA9525D suitable for SMBus and PMBus applications?
The PCA9525D is suitable for SMBus and PMBus applications because the NXP product information identifies it as a simple 2-wire bus buffer for those systems. Its 2.7 V to 5.5 V supply range and 1000 kHz bus capability cover common embedded power-management architectures. Confirm the voltage levels, pull-up arrangement, clock stretching, and fault behavior of all connected system-management devices before using the buffer in production.
What does the DIR pin do on the PCA9525D?
The DIR pin controls the direction of the unidirectional clock signal in the PCA9525D buffered path. According to the NXP product information, reversing this control allows controller devices to be positioned on either side of the buffer. DIR state should be managed during reset and power sequencing so that the controller does not drive the clock while downstream devices are still driving the same segment.
What does the EN pin do on the PCA9525D?
The EN input allows a PCA9525D bus section to be isolated. The NXP product information explains that this supports bringing individual system sections online successively. During startup, hold EN in the appropriate state until supply rails and downstream devices are ready; otherwise, partially powered peripherals may attempt to drive the buffered bus and create contention.
Where can I buy the obsolete PCA9525D?
The PCA9525D is no longer manufactured, so new procurement should use the Request a Quote form on this page to check exact-part availability and sourcing options. The NXP product information labels the device as no longer manufactured. Do not approve a substitute solely from the bus description; verify its pinout, voltage range, direction logic, enable behavior, operating speed, and lifecycle status before releasing it to production.
What is the price of the PCA9525D?
The current PCA9525D price is not published in this page because the device is obsolete and current supplier status must be checked by exact manufacturer part number. Use the Request a Quote form on this page for current sourcing review and commercial response. A procurement request should specifically identify PCA9525D, the SO8 package, the required reel or delivery format, quantity, and any acceptable manufacturer-approved lifecycle path.
What is the lead time for PCA9525D?
Lead time for the obsolete PCA9525D must be confirmed for the requested quantity and package rather than assumed from the original product life. Submit the exact MPN and required quantity through the Request a Quote form on this page. Because NXP lists the device as no longer manufactured, buyers should also request information about remaining factory stock, original packaging, traceability, and any available successor that has been reviewed for electrical and pin compatibility.
Is PCA9525D in stock?
Stock status for the PCA9525D is not constant because NXP lists the part as no longer manufactured and remaining inventory varies by package and region. Use the Request a Quote form on this page with the required quantity and packaging details for a current availability check. For an approved redesign, request lifecycle status and lot traceability as part of the sourcing response rather than relying on an unverified general stock count.
PCA9525D vs PCA9515AD,118 - which is better for a buffered I2C bus?
The PCA9525D and PCA9515AD,118 both belong to the NXP simple 2-wire buffer family and are identified in comparison listings as SOP8 devices. The PCA9525D provides DIR control for reversing the unidirectional clock path and EN control for bus isolation, while the PCA9515AD is generally associated with a simpler two-channel buffer arrangement. Compare the complete NXP pin descriptions and truth tables before selecting a drop-in device for a specific board.
When should I choose PCA9525D over PCA9600D?
Choose the PCA9525D when the design specifically benefits from its DIR-controlled clock direction and EN-controlled isolation behavior. A comparison listing identifies both devices as SOP8 parts with a 2.7 V to 5.5 V operating range and 1000 kHz I2C capability, but similar headline specifications do not prove interchangeable control logic. Review the pin functions and application diagrams for PCA9600D, especially where clock-direction reversal or staged bus isolation is required.
Can PCA9515AD,118 replace an obsolete PCA9525D?
PCA9515AD,118 is a listed NXP substitute for PCA9525D,118, but final replacement approval depends on the exact board implementation. The PCA9525D uses DIR and EN controls that affect clock direction and bus isolation, so a substitute with different control behavior can change system sequencing even when voltage, frequency, and package are similar. Compare every pin, direction truth table, timing limit, and operating condition before marking the substitute as a drop-in replacement.
What is the best drop-in replacement for PCA9525D?
The strongest documented substitute is PCA9510AD,118 because the DigiKey listing for obsolete PCA9525D,118 explicitly identifies it as an available parametric equivalent. It should still be treated as a conditional replacement until its SO8 pinout, DIR behavior, EN isolation, and 1000 kHz timing match the original design. Request the manufacturer data sheets and compare the truth tables rather than relying only on the parametric-match designation.
What can replace the PCA9525D in an I2C design?
The PCA9525D can be replaced only after confirming that the candidate preserves the 8-terminal footprint, 2.7 V to 5.5 V operation, DIR-controlled clock direction, EN isolation behavior, and required bus speed. PCA9510AD,118, PCA9515AD,118, PCA9508D, and PCA9600D appear in the available cross-reference records, but each has a different buffer or translation architecture. Use the complete pin and truth-table comparison to determine whether it is a true drop-in or only a redesigned replacement.

工程參考資料,適用於 PCA9525D — 比較、設計指引及合規資訊。

選型指南

Choose the PCA9525D when an existing 8-pin I2C or similar two-wire bus design depends on a DIR-controlled clock path, EN-controlled section isolation, a 2.7 V to 5.5 V supply range, and operation up to 1000 kHz. Choose PCA9510AD,118 when its manufacturer documentation confirms that the required DIR, EN, timing, and pin functions match, particularly for a simple obsolescence-driven redesign. Consider PCA9515AD,118 when its simpler two-channel architecture satisfies the system without direction reversal or section enable. Use PCA9508D only when dual-supply level translation or hot-swappable operation is required, since that changes the electrical design. PCA9600D is a close architectural candidate, but its pin functions and truth table must be reconciled before it is treated as a drop-in replacement.

與替代品比較

參數 本產品 PCA9510AD,118 PCA9515AD,118 PCA9600D PCA9508D PCA9525,118
Package 8-terminal SO8 SO8 SOP8 SOP8 SOP8 SO8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Primary Function Simple 2-wire bus buffer Parametric equivalent Two-wire bus buffer Advanced two-wire bus buffer Dual-supply hot-swappable I2C-bus repeater with level translation Simple 2-wire bus buffer

主要差異化特點

  • Reversible unidirectional clock direction (對比PCA9508D)
  • Dedicated bus-section enable control (對比PCA9515AD,118)
  • Matched industrial operating class (對比PCA9600D)

設計說明

Route SCL and SDA as a compact pair with a continuous ground reference, and keep the PCA9525D close to the point where the buffered segment begins. Avoid crossing split power planes or introducing long stubs between the buffer and downstream devices. Check rise time against bus capacitance and pull-up resistance rather than relying only on the 1000 kHz bus-rate specification.

Place the supply bypass capacitor immediately across the PCA9525D supply and ground pins, with the shortest return path possible. Confirm that every connected peripheral can tolerate the selected 2.7 V to 5.5 V bus voltage and that no partially powered device drives the isolated section. Manage EN and DIR during reset so the controller and downstream devices never contend for the same bus segment.

Do not treat the PCA9525D as a general-purpose voltage translator or as an automatic galvanic-isolation device. Its function is to buffer a compatible two-wire bus, and its EN and DIR pins have defined sequencing roles. When substituting a device, compare the complete pin description, direction truth table, bus timing, pull-up requirements, and enable state rather than matching only the SO8 outline and voltage range.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The industrial temperature grade is confirmed, but specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification claims are not stated in the referenced NXP product information.

相關搜尋

PCA9525D datasheet PCA9525D datasheet pdf PCA9525D pinout PCA9525D SO8 PCA9525D equivalent PCA9525D replacement PCA9525D cross reference PCA9525D vs PCA9515AD PCA9525D application circuit PCA9525D price PCA9525D stock NXP PCA9525D PCA9525D I2C bus buffer PCA9525D obsolete PCA9525D DIR EN pin

相關元件與詞彙

NXP Semiconductors PCA9525D PCA9525D,118 PCA9510AD,118 PCA9515AD,118 PCA9600D PCA9508D PCA9515APWR 2-wire bus buffer bus buffer line driver interface IC semiconductor I2C-bus SMBus DDC PMBus clock-and-data interface DIR control EN control SO8 small-outline package surface mount SMD 2.7 V to 5.5 V 1000 kHz industrial temperature range bus isolation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情