最後購買通知: PCA9535D 即將停產。最後下單日期: 聯絡我們. 查看可用的替代零件 →
NXP Semiconductors

PCA9535D - 16-Bit I2C I/O Expander | NXP Semiconductors

MPN: PCA9535D ✗ 停產
2.3 V to 5.5 V Vdss SO24 Package 400 kHz Speed
MOQ: 1 |

PCA9535D 概覽

The NXP Semiconductors PCA9535D is a 24-pin CMOS I/O expander that provides 16 general-purpose parallel input/output ports for I2C or SMBus systems and operates at up to 400 kHz. The device also includes an interrupt output and is housed in an SO24 package. NXP identifies the PCA9535D as a low-power version of the PCA9555 and lists the device as end of life.

An I/O expander is an interface IC that increases the number of general-purpose input/output lines available to a host controller. In the product hierarchy, the PCA9535D belongs to the I/O expander class of interface ICs, connects to a host through I2C or SMBus, and serves as a bridge between serial control and parallel external circuitry. It is useful when a microcontroller, application processor, or programmable logic controller has too few pins for switches, indicators, sensors, or other digital peripherals.

The PCA9535D combines 16 configurable GPIO ports with a 400 kHz serial interface and an interrupt output. Its configuration registers allow software to select input or output direction and control the output state. The low-power design is a key distinction from the PCA9555: according to the manufacturer documentation, the PCA9535 omits the internal I/O pull-up resistors, which reduces power consumption when the ports are held low. The interrupt output provides a hardware indication that a port input has changed, reducing the need for continuous polling.

The device uses eight I2C addresses, allowing multiple expanders on one bus when their hardware address pins are configured appropriately. Bus operation is handled through SCL and SDA, while the port pins provide the parallel side of the interface. Because the PCA9535D is described as low-power and compatible with the PCA9555 interface concept, existing firmware can be evaluated against the PCA9555 for migration, although software and timing should still be checked for the specific replacement.

Typical uses include industrial control panels, sensor and relay interfaces, LED status panels, programmable instrumentation, and compact embedded systems that need additional digital lines. The interrupt output can wake or notify a host when an external switch or sensor changes state. In battery-powered equipment, configuring unused ports as inputs held low can help avoid unnecessary current consumption.

PCB design should preserve clear access to the SDA, SCL, address, reset, interrupt, supply, and ground pins. The serial bus requires suitable pull-up resistors and routing away from noisy switching nodes. Confirm the exact NXP pin assignments, operating limits, timing requirements, and recommended decoupling directly from the manufacturer datasheet before releasing the PCB or production firmware.

直接替換替代品,適用於 PCA9535D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PCA9535D (相同外形與佔位) — 差異在於 Configuration Registers, Device Type, Interrupt Output, Package.

Texas Instruments
Configuration Registers: Yes
Device Type: 16-bit I2C/SMBus I/O expander
Interrupt Output: Open-drain interrupt output
比較對象 PCA9535D →

PCA9535DWR

✅ 直接替換
Texas Instruments
📦 SOIC-24
16-bit I2C/SMBus I/O expander · 16 · 2.3 V to 5.5 V · I2C and SMBus · 400 kHz · Open-drain interrupt output · Yes · 16 individual general-purpose I/O ports

聯絡詢價

查看資料表 →

PCA9535D 規格

Device Type 16-bit I2C/SMBus I/O expander with interrupt
Number of GPIO Ports 16 ports
Supply Voltage Range 2.3 V to 5.5 V
Maximum I2C Bus Frequency 400 kHz
介面 I2C and SMBus
Interrupt Output 1 open-drain interrupt output
Configuration Registers Input/output and output-state configuration registers
Device Address Capability 8 I2C addresses
Internal I/O Pull-Up Resistors Not fitted
Power Architecture Low-power version of the PCA9555
Process Technology CMOS
腳位數 24 pins
封裝 SO24
安裝類型 Surface mount

PCA9535D 腳位配置

SOIC-24 Package Pinout Diagram SOIC-24W 24-pin, 7.5x15.4mm, P1.27mm, JEDEC MS-013. 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 SOIC-24
腳位 1 A0 — I2C address input
腳位 2 A1 — I2C address input
腳位 3 A2 — I2C address input
腳位 4 VSS — Ground connection
腳位 5 P00 — General-purpose I/O port 0
腳位 6 P01 — General-purpose I/O port 1
腳位 7 P02 — General-purpose I/O port 2
腳位 8 P03 — General-purpose I/O port 3
腳位 9 P04 — General-purpose I/O port 4
腳位 10 P05 — General-purpose I/O port 5
腳位 11 P06 — General-purpose I/O port 6
腳位 12 P07 — General-purpose I/O port 7
腳位 13 INT — Interrupt output
腳位 14 P10 — General-purpose I/O port 10
腳位 15 P11 — General-purpose I/O port 11
腳位 16 P12 — General-purpose I/O port 12
腳位 17 P13 — General-purpose I/O port 13
腳位 18 P14 — General-purpose I/O port 14
腳位 19 P15 — General-purpose I/O port 15
腳位 20 VDD — Positive supply connection
腳位 21 SCL — I2C or SMBus clock input
腳位 22 SDA — I2C or SMBus bidirectional data line
腳位 23 RESET — Active-low reset input
腳位 24 NC — Not connected

典型應用

PCA9535D 適用於 6 應用s: Industrial Control Panels, LED Status and Relay Interfaces, Sensor and Switch Acquisition, Programmable Test and Measurement Equipment, Communication and Network Equipment, Compact Embedded Controller Expansion.

🏭

Industrial Control Panels

The PCA9535D fits industrial control panels that require more switch, lamp, and interlock inputs than the host controller can provide directly. Its 16 ports can read panel contacts, operate status indicators, or control discrete interface signals through the I2C bus at up to 400 kHz. The interrupt output lets the controller respond when an input changes instead of continuously polling all 16 lines. Because the device is a low-power PCA9555 relative without internal I/O pull-ups, the panel design should include external pull-ups only where the wiring requires them. Firmware must configure each port direction before driving a connected actuator and account for the end-of-life status during product planning.

💡

LED Status and Relay Interfaces

The PCA9535D is useful as a compact output driver for LED status groups and relay-control logic in embedded equipment. Sixteen configurable outputs provide more parallel control than most small microcontrollers while preserving a two-wire command path for configuration and state updates. The 400 kHz I2C rate allows the host to update multiple output bytes efficiently, and software-controlled outputs simplify state sequencing for indicators. For relay boards, keep inductive transient paths away from the compact digital device and provide the required coil suppression and grounding. The absence of internal I/O pull-ups helps minimize current when outputs are held low, but external pull-ups may be needed on open-drain or bus-connected signals.

🧩

Sensor and Switch Acquisition

The PCA9535D can consolidate binary sensors, selectors, limit switches, and panel contacts into a single I2C peripheral. Sixteen inputs reduce the host pin burden and eliminate separate multiplexers for basic digital states. When the host does not need continuous status, the interrupt output provides an event-driven indication that allows the controller to remain in a lower-power state until an input changes. Software should configure unused pins appropriately and apply suitable debouncing in firmware for mechanical contacts. The 24-pin SO24 footprint is practical for compact embedded boards, but the layout should preserve short, stable I2C routing and isolate switch wiring from sensitive analogue circuitry.

🖥️

Programmable Test and Measurement Equipment

The PCA9535D is appropriate for programmable test equipment that needs numerous front-panel inputs and outputs while keeping the main controller footprint compact. It can control range-select relays, route logic-level signals, capture operator switches, and drive indicator LEDs through the 16 GPIO ports. Configuration registers permit software to change port direction without rewiring the instrument, while interrupt support avoids repeated status reads. The bus operates at up to 400 kHz, which is useful when multiple output groups must change during a test sequence. Because this NXP device is end of life, a new instrument should be reviewed against the PCA9535DWR alternative before schematic release and firmware reuse.

🌐

Communication and Network Equipment

The PCA9535D can serve as a local I/O endpoint in communication equipment where rear-panel connectors, status lamps, link controls, or alarm inputs exceed the host processor's available pins. The I2C interface allows the equipment controller to share the serial bus with other peripherals, while the interrupt line provides immediate notification of a changed rear-panel input. The device's low-power construction and lack of internal I/O pull-ups can reduce unnecessary current in systems that hold many lines low. In network-oriented products, place the expander away from high-current switching stages, maintain short bus routing, and verify that all address-selection configurations coexist with the intended bus population.

📱

Compact Embedded Controller Expansion

The PCA9535D gives a compact microcontroller or application processor 16 additional GPIO lines without requiring a larger host package. A single I2C address can control LEDs, read buttons, operate latches, and monitor discrete system conditions, while the interrupt output supports responsive event handling. This is particularly useful when PCB area is constrained but board-level I/O remains extensive. The SO24 package supports straightforward surface-mount assembly, provided the PCB honors the manufacturer's pin and land-pattern requirements. Firmware should use the configuration and port registers from the manufacturer datasheet, test reset and power-up states, and include an end-of-life migration plan for production releases.

What is the PCA9535D used for?
The PCA9535D is a 16-bit I2C or SMBus I/O expander used to add parallel GPIO capability to a host controller. It provides 16 configurable ports, an interrupt output, and operation at up to 400 kHz in an SO24 package. The NXP product page identifies it as a low-power version of the PCA9555, making it appropriate for switches, indicators, sensors, and other digital peripherals connected through a serial bus.
How many GPIOs does the PCA9535D provide?
The PCA9535D provides 16 general-purpose input/output ports. Each port can be configured as an input or output through the device configuration registers, and output levels are controlled by the corresponding port registers. NXP describes the product as a 24-pin CMOS I/O expander for I2C and SMBus applications. The package is the SO24 variant identified on the manufacturer product page.
Where can I download the PCA9535D datasheet PDF?
The PCA9535D datasheet and product documentation can be reached from the official NXP product page at https://www.nxp.com/part/PCA9535D. Open the Data Sheet link for the complete electrical characteristics, register definitions, timing diagrams, pin configuration, and application guidance. Use the manufacturer document for production design because summary listings do not include every timing limit or package detail.
Where is the PCA9535D pinout?
The PCA9535D pinout is shown in the pin configuration and pin description tables of the NXP manufacturer datasheet. The SO24 package contains the SDA, SCL, address-selection, reset, interrupt, supply, ground, and 16 GPIO connections. When assigning PCB tracks, use the numbered pin table rather than relying on package orientation alone, and connect the power and ground pins according to the datasheet layout guidance.
What are the key specifications of PCA9535D that engineers should know?
The principal PCA9535D specifications are 16 GPIO ports, a 2.3 V to 5.5 V supply range, I2C/SMBus communication at up to 400 kHz, an interrupt output, and an SO24 package. The device is a CMOS low-power relative to the PCA9555 because it omits internal I/O pull-up resistors. It can also occupy eight selectable I2C addresses, allowing multiple expanders to share a serial bus.
What is the difference between PCA9535D and PCA9555?
The PCA9535D is the low-power version of the PCA9555 and removes the PCA9555 internal I/O pull-up resistors. That reduction lowers current consumption when ports are held low, but external pull-ups may be required when a driven-high signal needs one. Both devices provide a 16-bit parallel I/O concept with configuration registers and interrupt support, so firmware compatibility should be checked during any migration.
PCA9535D versus PCA9535DWR: is the Texas Instruments part a drop-in replacement?
The PCA9535DWR is a close board-level alternative to the NXP PCA9535D because both are identified as 24-pin I2C/SMBus, 16-bit GPIO expanders in SOIC-style packages. The NXP part is marked end of life, while the Texas Instruments listing is active. Confirm electrical limits, address behavior, register compatibility, timing, and lifecycle requirements before approving it as a production substitute, and verify the exact SO24 footprint dimensions.
When should I choose PCA9535D instead of PCA9534APWR?
Choose the PCA9535D when the design needs 16 GPIO lines rather than the eight lines associated with PCA9534A. Both devices fit the I2C expansion role, but they are not pin-compatible because their port counts and package assignments differ. The PCA9535D is more appropriate for relay groups, multi-digit indicators, switch matrices, or multiple digital sensor inputs where sixteen parallel lines reduce the host pin count.
Is the PCA9535D suitable for low-power embedded systems?
The PCA9535D is suitable for low-power embedded systems because NXP identifies it as the low-power version of the PCA9555 and omits internal I/O pull-up resistors. That feature is especially helpful when port outputs are held low and pull-up current would otherwise continue to flow. The final power budget still depends on the configured port states, external pull-ups, bus activity, and the exact operating voltage.
Can TCA9535 replace PCA9535D?
A TCA9535 can be considered as a functional successor to the PCA9535D, but it should not be treated as a guaranteed drop-in replacement without package and timing checks. Texas Instruments describes the TCA9535 as a newer-generation alternative that offers different operating-voltage and power-ramp characteristics. The PCA9535D uses SO24, so the candidate TCA9535 ordering code must also use that footprint and preserve the required pin, address, and interrupt functions.
What can replace the end-of-life PCA9535D?
The PCA9535DWR is the closest verified alternative because it is a Texas Instruments 24-SOIC, 16-bit I2C/SMBus GPIO expander with interrupt support. Its use should be conditional on a manufacturer-level review of pinout, electrical characteristics, I2C timing, reset behavior, and software compatibility. Use the Request a Quote form on this page to discuss lifecycle risk, available grades, and the exact replacement quantity.
Is PCA9535D in stock and how long is the lead time?
Current PCA9535D inventory and lead time should be requested through the Request a Quote form on this page because NXP identifies the device as end of life and stock can change rapidly. Provide the required quantity, acceptable date code, target package suffix, and manufacturing destination when requesting the quotation. This allows procurement to confirm the exact MPN, current supply position, and any permitted last-time-buy arrangement.
Where can I buy PCA9535D online?
Use the Request a Quote form on this page to request the NXP PCA9535D by exact MPN, quantity, and required packaging form. Because the manufacturer marks PCA9535D as end of life, buyers should also consider the verified PCA9535DWR alternative for a new-production transition. A formal quotation is preferable to assuming that any generic PCA9535 designation, package suffix, or lifecycle status will be interchangeable.
How much does PCA9535D cost?
The current PCA9535D quotation depends on quantity, package suffix, date code, and market availability because the device is end of life. Submit the MPN and required quantity through the Request a Quote form on this page. That request is also the appropriate way to compare commercial options against the PCA9535DWR transition path while preserving traceability and avoiding assumptions based on historical catalog pricing.
How should the PCA9535D I2C address and interrupt pins be connected?
The PCA9535D uses hardware address-selection connections to establish its I2C address, while the interrupt output provides an active-low hardware notification when an input state changes. The serial bus is formed by SDA and SCL with the pull-up arrangement required by the bus specification and application design. Connect the reset, supply, and ground pins exactly as shown in the NXP datasheet and account for address selection before assigning multiple devices to one bus.

工程參考資料,適用於 PCA9535D — 比較、設計指引及合規資訊。

選型指南

Choose the PCA9535D when an existing design needs the exact NXP 16-bit I2C/SMBus GPIO expander in an SO24 footprint, particularly for maintained equipment that already uses its register map and wiring. It is a low-power relative to the PCA9555 because internal I/O pull-ups are absent, so it can suit applications that hold ports low. For new production, favor the active PCA9535DWR after checking its electrical limits, timing, reset behavior, and register compatibility. Use PCA9534APWR only when eight ports are sufficient and the PCB is being redesigned. A TCA9535 may offer a newer functional path, but it should not be treated as a direct SO24 replacement without confirming package suffix, pinout, voltage range, and software behavior. For procurement of the original NXP device, request current supply and last-time-buy options through the quotation form.

與替代品比較

參數 本產品 PCA9535DWR
Brand NXP Semiconductors Texas Instruments
Package SO24 24-SOIC
GPIO Count 16 bits 16 bits
Serial Interface I2C/SMBus I2C/SMBus
Maximum Bus Frequency 400 kHz 400 kHz
Interrupt Output Yes Yes
Lifecycle Status End of life Active
Pin Count 24 pins 24 pins

主要差異化特點

  • Low-power I/O expansion without internal port pull-ups (對比PCA9555)
  • Sixteen ports with event notification (對比PCA9534APWR)
  • Available active transition path for an end-of-life design (對比PCA9535DWR)

設計說明

Route SDA and SCL as short, continuous traces away from relay coils, switching-regulator power paths, and high-edge-rate inputs. The PCA9535D supports up to 400 kHz, so total bus capacitance, pull-up strength, and trace length must be evaluated together rather than treating the frequency rating as a board-level guarantee. Place the device near the connector or controlled peripheral group it serves, and keep the serial bus away from parallel GPIO traces that can switch simultaneously.

The PCA9535D omits the internal I/O pull-up resistors found on the PCA9555. Add external pull-ups only on signals that require a defined high state, and do not fit them automatically across every GPIO because that can increase current when the port is held low. Account for the selected external resistance, bus capacitance, and operating voltage when confirming that the complete I2C network meets the required rise time.

Do not treat every PCA9535-family ordering code as a footprint-compatible substitute. The target uses an SO24 package, while some family members are offered in TSSOP or other package forms. Compare the exact pin table, exposed dimensions, address inputs, reset behavior, interrupt polarity, electrical limits, and register map before releasing a replacement to production. The lifecycle status of an alternative should also be checked rather than inferred from its device-family name.

Configure unused GPIO pins during startup so they do not float or create unintended paths into external circuitry. For low-power operation, hold inputs in a defined state and avoid external pull-ups that continuously conduct. The PCA9535D's low-power design helps when ports are held low, but the complete current budget still depends on the supply voltage, bus activity, external pull-ups, and the attached peripheral circuits.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

NXP labels PCA9535D as end of life. Compliance attributes were not stated in the manufacturer product listing, so each field remains unknown.

資料驗證日期: 2026-11-19 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

PCA9535D datasheet PCA9535D datasheet pdf PCA9535D pinout PCA9535D SO24 pinout PCA9535D equivalent PCA9535D replacement PCA9535D cross reference PCA9535D vs PCA9535DWR PCA9535D vs PCA9555 PCA9535D I2C GPIO application NXP PCA9535D PCA9535D price PCA9535D stock PCA9535D lead time PCA9535D schematic

相關元件與詞彙

NXP Semiconductors PCA9535D PCA9535DWR PCA9535 PCA9535CPW PCA9534APWR PCA9555 PCF8574ADWR TCA9535 I/O expander GPIO interface IC semiconductor I2C SMBus parallel port interrupt output SO24 CMOS low-power I/O configurable digital input configurable digital output 400 kHz serial bus end-of-life surface-mount package
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情