NXP Semiconductors

PCA9546APW - 4-Channel I2C Switch with Reset | NXP

MPN: PCA9546APW ✓ 啟用中
16-pin TSSOP Package
MOQ: 1 |

PCA9546APW 概覽

NXP Semiconductors PCA9546APW is a four-channel bidirectional I2C-bus switch with an active-low reset input, packaged in a 16-pin TSSOP. It allows one upstream SCL/SDA pair to fan out to four downstream SCL/SDA channel pairs. Individual channels, or combinations of channels, can be selected through a programmable control register, allowing multiple downstream buses to share one host I2C controller without requiring a separate switch for every bus.

An I2C-bus switch is an interface integrated circuit that routes clock and data lines between a controller and peripheral buses. Its role in the hierarchy is I2C interface switch, then bus interface IC, then interface IC, and finally semiconductor. Unlike a simple passive connection, this switch actively selects channels and provides bidirectional translation between upstream and downstream voltage domains. This makes it useful when several embedded devices or sensors must be connected to one I2C bus while maintaining individual enable control.

The PCA9546A family provides four independently selectable downstream channels and a control interface connected to the upstream bus. Its active-low reset input allows the switch to recover from a stuck bus condition by returning the control register to its default state. The 16-TSSOP package is intended for surface-mount PCB assembly. Operation requires correct I2C address handling, suitable pull-up placement, and verification of downstream logic levels against the device's electrical limits.

The switch supports communication with multiple downstream devices that use compatible I2C protocols and addresses. Channel selection is software-controlled through the programmable control register, so a host processor can enable only the required downstream bus at a particular time. This can reduce unnecessary bus activity and help prevent devices with the same fixed I2C address from responding simultaneously when they are connected to separate switched channels.

Typical uses include sensor aggregation, industrial measurement modules, programmable instrumentation, embedded control boards, and systems that connect several low-bandwidth peripheral buses to one microcontroller. It is also appropriate for prototype and production boards requiring more than one downstream I2C branch. The design should preserve the upstream bus, isolate each downstream branch with the intended pull-up network, and account for capacitance and propagation delay introduced by the additional switch and wiring.

A key implementation consideration is bus recovery. The active-low reset function can clear a channel-selection state when a downstream device holds SDA or SCL low, but designers should still provide a mechanism to cycle power or reset the affected peripheral. Validate address conflicts, logic thresholds, pull-up strength, and reset timing before using the switch with devices that operate at different voltage levels.

This page combines the manufacturer product information with practical guidance for channel routing, reset behavior, PCB implementation, and replacement analysis. It also distinguishes ordering-code variants from genuinely different functions so engineers can evaluate drop-in sourcing options without mistaking a packaging suffix for a functional upgrade.

直接替換替代品,適用於 PCA9546APW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

PCA9546APW,118

✅ 直接替換
📦 16-TSSOP
0% difference in stated channel count and package; ordering-code suffix differs, while detailed electrical comparison is unavailable

📋 參考替代品(不在目錄中)

PCA9546APWR

✅ 直接替換
📦 16-TSSOP
0% difference in stated channel count and package; manufacturer and ordering suffix differ, while detailed electrical comparison is unavailable

📋 參考替代品(不在目錄中)

PCA9546APW 最大額定值與電氣特性

Device Type 4-channel bidirectional I2C-bus switch
Number of Channels 4 channels
Upstream Bus 1 SCL/SDA pair
Downstream Buses 4 SCL/SDA pairs
Interface Standard I2C
Reset Input Active-low
Control Method Programmable control register
Data Direction Bidirectional
封裝 16-pin TSSOP
安裝類型 Surface mount

PCA9546APW 16-pin tssop 腳位配置指南

PCA9546APW(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

PCA9546APW 的 16-pin tssop 封裝腳位圖

無詳細腳位定義資料: PCA9546APW.

請參閱 資料表 以查看完整腳位配置。

典型應用

PCA9546APW 適用於 6 應用s: Multi-Sensor Controller, Programmable Test and Measurement, Industrial Embedded Control, Connected Sensor Hub, I2C Address Conflict Isolation, Portable Instrumentation.

🧩

Multi-Sensor Controller

The PCA9546APW fits a controller board that connects several groups of I2C sensors to one host processor. Its four downstream SCL/SDA pairs let firmware enable only the branch associated with the active measurement, while the programmable control register can select individual channels or combinations. This arrangement also separates sensors that use fixed, identical addresses onto different branches. The design must keep each channel's pull-up network local, verify the total downstream capacitance, and confirm that every sensor operates within the switch's supported voltage and timing limits.

📊

Programmable Test and Measurement

In programmable instrumentation, the PCA9546APW can route a common I2C controller toward up to four measurement channels. The host can select a channel or combination through the control register, reducing unnecessary communication with devices that are not being measured. The active-low reset input provides a controlled way to return the switch to its default state after a downstream bus fault. For accurate measurements, isolate each branch carefully, provide appropriate pull-ups, and validate the maximum operating clock against the slowest downstream peripheral and the added bus capacitance.

🏭

Industrial Embedded Control

The PCA9546APW is useful in industrial embedded-control boards that must connect several low-bandwidth I2C peripheral groups to a single processor interface. Four switchable downstream branches simplify routing when a system contains sensor boards, interface converters, or configuration devices with incompatible fixed addresses. The reset function helps the host recover the multiplexer after a peripheral holds the bus low, although the downstream device may also require a power cycle. Industrial designs should account for operating-temperature requirements, transient noise, grounding, pull-up placement, and cable or harness capacitance before release.

🌐

Connected Sensor Hub

A connected sensor hub can use the PCA9546APW to organize multiple downstream I2C sensor branches behind one upstream bus. Channel selection prevents idle branches from participating in communication and gives each device group an isolated path. This is especially helpful when several compact sensor modules use fixed addresses and cannot be reconfigured. Firmware should maintain a deterministic channel-selection sequence, avoid changing channels while a transfer is active, and use the reset input as part of a documented recovery procedure rather than as a substitute for correct peripheral power management.

🔧

I2C Address Conflict Isolation

The PCA9546APW addresses the common problem of several fixed-address I2C devices responding simultaneously on one bus. Each conflicting device is connected to a separate downstream channel, and the host enables one channel at a time during the associated transfer. This approach preserves the existing device firmware and avoids rewriting peripheral address logic. Because the channels share one upstream interface, the controller must complete each bus transaction before selecting another channel, and pull-ups must be placed so disabled branches do not create unintended signal paths or excessive loading.

📱

Portable Instrumentation

Portable test and measurement equipment can use the PCA9546APW to connect a compact set of sensors or fixtures through one I2C port. The 16-pin TSSOP package supports board-level integration, while four selectable channels simplify expansion without adding a separate switch at the host controller. Runtime channel control can reduce communication overhead when only one fixture is active. Designers should keep traces short where possible, place pull-ups according to the selected bus topology, verify capacitive loading from attached leads, and confirm the device's electrical limits across the complete temperature range of the portable product.

推薦產品摘要

PCA9546APW,118 Same-manufacturer ordering alternative 用於: Multi-Sensor Controller, Programmable Test and Measurement, Industrial Embedded Control, Connected Sensor Hub, I2C Address Conflict Isolation, Portable Instrumentation PCA9546APWR Same-package cross-manufacturer alternative 用於: Multi-Sensor Controller, Programmable Test and Measurement, Industrial Embedded Control, Connected Sensor Hub, I2C Address Conflict Isolation, Portable Instrumentation
What is the PCA9546APW?
The NXP Semiconductors PCA9546APW is a four-channel bidirectional I2C-bus switch with an active-low reset input in a 16-pin TSSOP package. According to the manufacturer datasheet, one upstream SCL/SDA pair fans out to four downstream SCL/SDA pairs. A programmable control register selects individual channels or channel combinations, allowing a host controller to share an I2C interface among several peripheral buses.
How many I2C channels does the PCA9546APW provide?
The PCA9546APW provides four downstream I2C channels in addition to one upstream SCL/SDA pair. Each downstream channel can be selected through the programmable control register, including combinations of channels. The manufacturer datasheet describes the PCA9546A as a quad bidirectional translating switch, making the device suitable for separating devices with fixed, conflicting I2C addresses into independently controlled buses.
What does the active-low RESET input do on the PCA9546APW?
The active-low RESET input returns the PCA9546APW to its default operating state and can help recover the switch after a downstream bus becomes stuck. According to the manufacturer product information, reset allows the device to recover from a fault condition. The external circuit should hold RESET inactive during normal operation and provide a controlled reset pulse without violating downstream bus timing.
Where can I download the PCA9546APW datasheet PDF?
The official PCA9546APW datasheet and product information are available from the NXP part page at https://www.nxp.com/part/PCA9546APW. Select the Data Sheet link on that page to obtain the manufacturer PDF. The third-party datasheet pages in search results can aid discovery, but the NXP document should be the controlling reference for pin assignments, electrical limits, reset timing, and recommended application layouts.
Where can I find the PCA9546APW pinout?
The PCA9546APW pinout is documented in the NXP manufacturer datasheet and is associated with its 16-pin TSSOP package. Use the pin-description and package-outline sections when assigning SCL, SDA, reset, address-selection, ground, and supply connections. The verified product information confirms the 16-TSSOP package, but it does not expose the complete numbered pin table for publication on this page.
Can the PCA9546APW connect devices with the same I2C address?
Yes, the PCA9546APW can connect fixed-address devices that would conflict if placed on one common I2C segment. Route each conflicting device to a separate downstream channel and enable only the required channel during communication. The manufacturer datasheet confirms that individual SCx/SDx channels can be selected, so channel isolation can prevent simultaneous responses from devices sharing the same address.
What can replace the PCA9546APW?
The PCA9546APWR and PCA9546APW,118 are drop-in ordering alternatives identified in cross-reference results for the PCA9546APW function. The PCA9546APWR is listed as a Texas Instruments 16-TSSOP device, while PCA9546APW,118 is an NXP 16-TSSOP ordering code. Confirm the manufacturer-specific pin definitions, electrical limits, and control-register behavior against the relevant datasheet before substituting either option.
Is PCA9546APW the same as PCA9546APWR?
PCA9546APW and PCA9546APWR describe closely related 16-TSSOP ordering variants of the four-channel I2C-switch function, but the suffix and manufacturer must be checked. Cross-reference results identify PCA9546APWR as a Texas Instruments part and PCA9546APW as an NXP product. Both use the same four-channel architecture, but engineers should verify pin compatibility and device-specific electrical specifications rather than relying on suffix similarity alone.
When should I choose the PCA9546APW over a fixed four-channel switch?
Choose the PCA9546APW when software must select one or more I2C branches dynamically or recover from a downstream bus fault. Its programmable control register allows individual or combined channel selection, and its active-low reset input adds a recovery control. A fixed four-channel switch may be simpler when every branch must always be connected, but it does not provide the same runtime channel-selection flexibility.
Is the PCA9546APW suitable for a multi-sensor controller board?
The PCA9546APW is suitable for a multi-sensor controller board when the sensors use compatible I2C electrical levels and protocol timing. Its four downstream channels can separate sensor groups or resolve fixed-address conflicts, while the control register allows the firmware to enable only the active branch. Confirm supply voltage, logic thresholds, clock rate, and bus capacitance against the manufacturer electrical limits before finalizing the interface.
PCA9546APW vs PCA9507DP: which is more suitable?
PCA9546APW is the better fit when an application requires four independently selectable downstream I2C channels and an active-low reset input. PCA9507DP is a different eight-channel I2C switch in a different package, so it is not a same-footprint drop-in replacement for this design. Compare channel count, package, reset behavior, address configuration, voltage limits, and the firmware control requirements before selecting between them.
Where can I buy PCA9546APW online?
Use the Request a Quote form on this page to request current PCA9546APW availability, pricing, lead time, and order quantities. The manufacturer lists the PCA9546APW as an active product, while authorized distribution records confirm market availability for the exact device. A quotation request provides the appropriate channel for the quantity, package, and delivery requirements of your specific build.
What is the price of the PCA9546APW?
Current PCA9546APW pricing depends on order quantity, manufacturer source, and supply status, so use the Request a Quote form on this page for a current offer. The structured price evidence for this product contains no qualifying quantity-break table, and therefore no static unit price is displayed. This avoids presenting a stale figure that may not match the requested quantity or delivery schedule.
What is the lead time for PCA9546APW?
Request the current PCA9546APW lead time through the Request a Quote form on this page. Lead time can change with order quantity, manufacturing source, and inventory conditions, so it should be confirmed for each order rather than quoted as a fixed interval. Include the required quantity, target delivery date, and acceptable package suffix in the request.
Is PCA9546APW in stock?
The manufacturer lists PCA9546APW as active, and current distributor records show the part available through multiple channels. Stock levels can still change rapidly by quantity and ordering code. Use the Request a Quote form on this page to confirm current availability for the exact PCA9546APW suffix, required quantity, and shipment destination.
What are the key specifications of PCA9546APW that engineers should know?
The key PCA9546APW specifications are four downstream I2C channels, one upstream SCL/SDA pair, bidirectional switching, programmable individual or combined channel selection, an active-low reset input, and a 16-pin TSSOP package. According to the NXP manufacturer datasheet, the upstream pair fans out to four downstream pairs. Voltage range, maximum clock frequency, current, and temperature limits should be taken from the manufacturer datasheet before schematic release.
What is the best NXP equivalent for PCA9546APW?
PCA9546APW,118 is the closest NXP ordering alternative identified for the PCA9546APW and retains the four-channel, 16-TSSOP switch function. Its NXP ordering code differs by the added comma and 118 suffix, so check the manufacturer ordering information before treating it as a board-level replacement. Electrical limits, reset timing, and control-register behavior should also be compared with the original device.

工程參考資料,適用於 PCA9546APW — 比較、設計指引及合規資訊。

選型指南

Choose PCA9546APW when a design requires one upstream I2C connection to fan out to four downstream buses, software-controlled channel selection, and an active-low recovery reset. It is particularly useful when fixed-address peripherals must be isolated onto separate branches. PCA9546APW,118 is the closest same-manufacturer ordering alternative when that exact suffix is required. PCA9546APWR is a same-package, four-channel alternative from Texas Instruments, but the manufacturer-specific pin definitions, electrical limits, address behavior, and reset timing must be verified before substitution. Avoid choosing PCA9546APW when all peripherals must share one uninterrupted address domain, when voltage levels exceed the device limits, or when required bus speed and cable capacitance are unsuitable. For any replacement, review the controlling manufacturer datasheet and confirm that the PCB footprint, control-register operation, power requirements, and downstream bus behavior are unchanged.

與替代品比較

參數 本產品 PCA9546APW,118 PCA9546APWR
Brand NXP Semiconductors NXP Semiconductors Texas Instruments
Package 16-TSSOP 16-TSSOP 16-TSSOP
Device Type 4-channel bidirectional I2C-bus switch 4-channel I2C-bus switch 4-channel I2C/SMBus switch
Number of Channels 4 channels 4 channels 4 channels
Upstream Bus 1 SCL/SDA pair 1 SCL/SDA pair 1 SCL/SDA pair
Downstream Buses 4 SCL/SDA pairs 4 SCL/SDA pairs 4 SCL/SDA pairs
Reset Function Active-low reset input Reset function indicated by part family Reset function indicated by part family
Control Interface Programmable control register over I2C Programmable control register Programmable control register
Mounting Type Surface mount Surface mount Surface mount

主要差異化特點

  • Same four-channel footprint and architecture (對比PCA9546APWR)
  • Manufacturer-specific ordering continuity (對比PCA9546APWR)
  • Programmable channel isolation (對比PCA9546APW,118)

設計說明

Route each downstream SCL and SDA branch as a short, matched pair from the switch to its intended peripheral group. Keep pull-up placement consistent with the selected bus topology, and avoid long stubs from disabled channels that could increase capacitance or permit unintended signal coupling. Use a continuous ground plane beneath the TSSOP and minimize loop area around clock, data, and supply paths.

Do not change channel selection while an I2C transfer is in progress. Complete the current transaction, acknowledge or handle the peripheral response, and then issue the next control-register write. Also ensure the host does not address a disabled channel. A reset can clear the multiplexer state, but it does not necessarily reset a downstream peripheral that is holding SDA or SCL low.

Validate downstream capacitance, pull-up resistance, clock rate, and peripheral timing together. Each additional branch increases the amount of wiring and capacitance that the bus must drive. Compare the complete operating envelope with the manufacturer limits, and use the slowest downstream device when determining whether a shared clock rate is acceptable.

Decouple the switch close to its supply pins with the capacitance recommended by the manufacturer datasheet and provide a low-impedance ground return. Do not infer the allowable supply range from unrelated PCA95xx devices; confirm the exact PCA9546APW limits. Ensure the host and downstream peripherals use compatible logic levels or include appropriate level translation outside the switch.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The verified product information does not state the requested compliance status. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations with the manufacturer or the applicable product documentation.

相關搜尋

PCA9546APW datasheet PCA9546APW 118 datasheet PCA9546APW NXP PCA9546APW datasheet pdf PCA9546APW pinout PCA9546APW equivalent PCA9546APW replacement PCA9546APW cross reference PCA9546APW vs PCA9546APWR PCA9546APW 16-TSSOP PCA9546APW four channel I2C switch PCA9546APW active low reset PCA9546APW price PCA9546APW stock PCA9546APW application circuit

相關元件與詞彙

NXP Semiconductors PCA9546APW PCA9546APW,118 PCA9546APWR Texas Instruments PCA9546A I2C-bus switch quad bidirectional translating switch bus interface IC interface IC semiconductor I2C SMBus programmable control register active-low reset bidirectional channel SCL SDA 16-TSSOP TSSOP package family surface-mount technology I2C address conflict bus recovery multi-sensor controller industrial embedded control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情