NXP Semiconductors

PCA9665N - 1MHz FM+ Parallel-to-I2C Controller | NXP

MPN: PCA9665N ✓ 啟用中
2.5 V or 3.3 V Vdss 20-pin DIP Package
MOQ: 1 |

PCA9665N 概覽

The NXP Semiconductors PCA9665N is a Fast-mode Plus parallel-bus to I2C-bus controller that supports data rates up to 1 MHz, provides a 68-byte data buffer, and offers 25 mA SCL/SDA drive capability. It is offered in a 20-pin through-hole DIP package for industrial applications. The device can operate as either an I2C master or slave and transfers data between a parallel microcontroller or microprocessor and a serial I2C bus.

An I2C controller is an interface IC that bridges parallel processor buses and the serial I2C ecosystem. Parallel buses transfer multiple bits simultaneously, while I2C uses clocked SDA and SCL lines to exchange data between integrated circuits. The PCA9665N places this conversion in a dedicated peripheral, reducing the number of serial transactions and GPIO connections required by a host processor when it must control multiple I2C devices.

The PCA9665N supports I2C Fast-mode Plus operation at 1 MHz and can drive SCL and SDA lines with 25 mA capability. Its 68-byte buffer supports byte-oriented and buffered data transfers between the parallel and serial sides. General Call support and software reset over the parallel bus add useful control functions for systems that need coordinated peripheral addressing or restart behavior.

Two operating modes make the controller suitable for different system architectures. In master mode, it initiates transfers on the I2C bus; in slave mode, it responds to another bus controller. Communication can be interrupt-driven or managed through a polled handshake, allowing the interface to fit both event-driven firmware and simpler supervisory control loops.

Typical applications include industrial control equipment, test and measurement systems, communication modules, peripheral expansion, legacy parallel-processor systems, and embedded products that need to retain a parallel bus while adding modern serial peripherals. Its through-hole DIP format is particularly useful for prototypes, legacy control boards, and industrial systems assembled around through-hole components.

Designers should account for the 1 MHz bus limit, confirm that every connected I2C device supports the intended speed, and validate pull-up resistor sizing for the target bus voltage and capacitance. Because Fast-mode Plus uses lower resistance pull-ups than standard Fast-mode, incorrect resistor values can produce excessive rise times, ringing, or communication errors.

This page organizes the manufacturer-described controller capabilities, package information, sourcing pathways, and engineering trade-offs into a concise selection guide. It also distinguishes the DIP-20 target from similarly named PCA9665 devices offered in SOIC, TSSOP, and HVQFN packages, which cannot replace this through-hole part without a PCB redesign.

直接替換替代品,適用於 PCA9665N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

PCA9665N,112

✅ 直接替換
📦 20-DIP
Same 20-DIP device configuration; ordering suffix differs, with 0% change in the documented key electrical and package ratings

📋 參考替代品(不在目錄中)

PCA9665N 規格

Device Type Fast-mode Plus parallel-bus to I2C-bus controller
I2C Bus Maximum Data Rate 1 MHz
I2C Drive Capability 25 mA on SCL and SDA
Data Buffer Size 68 byte
供應電壓 2.5 V or 3.3 V
I2C Operating Role Master or slave
Transfer Organization Byte or buffered basis
Host Interface 8-bit parallel bus
Transfer Control Interrupt or polled handshake
General Call Support Yes
Software Reset Support Yes, over the parallel bus
Package Type 20-pin DIP
安裝類型 Through-hole
Temperature Grade Industrial
Application Segment Industrial
腳位數 20

PCA9665N 20-pin dip 腳位配置指南

PCA9665N(20-pin dip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

PCA9665N 的 20-pin dip 封裝腳位圖

無詳細腳位定義資料: PCA9665N.

請參閱 資料表 以查看完整腳位配置。

典型應用

PCA9665N 適用於 6 應用s: Industrial Parallel-Control Expansion, Test and Measurement Equipment, Communication and Network Peripherals, Legacy Microprocessor I2C Upgrade, Embedded Peripheral Expansion, Prototype and Legacy Through-Hole Assemblies.

🏭

Industrial Parallel-Control Expansion

The PCA9665N fits legacy industrial controllers whose host processor exposes an 8-bit parallel bus but needs to operate several I2C peripherals. It acts as a dedicated protocol bridge, supporting master or slave operation at up to 1 MHz with interrupt-driven or polled-handshake transfers. The 68-byte buffer helps separate parallel-bus activity from serial-bus timing, while 25 mA SCL and SDA drive capability supports industrial interconnect arrangements. Designers should confirm logic-level compatibility, choose pull-ups for the intended bus capacitance, and test all connected peripherals at the highest intended operating frequency.

🔧

Test and Measurement Equipment

The PCA9665N is useful in test and measurement instruments where a legacy parallel control processor must read sensors or configure data-acquisition components over I2C. Its buffered 68-byte transfer path reduces the need for direct serial-driver routines in the host firmware, while selectable interrupt or polled-handshake operation supports both fast event capture and simple supervisory loops. Fast-mode Plus operation up to 1 MHz can shorten transaction time when the attached instruments support that rate. Validation should include bus timing, clock stretching behavior, interrupt latency, and recovery after reset or power-up.

🌐

Communication and Network Peripherals

The PCA9665N can bridge a parallel system processor to I2C communication devices such as transceivers, EEPROMs, or sensor controllers. Operating as an I2C master allows the host to initiate standardized serial transactions, while slave mode supports configurations in which another bus master addresses the parallel-side system. The 1 MHz Fast-mode Plus capability is attractive for communication-oriented industrial designs, provided every attached device supports the same rate. The interrupt interface lets the parallel processor remain responsive while the controller completes byte or buffered transfers.

🖥️

Legacy Microprocessor I2C Upgrade

The PCA9665N offers a practical path for adding I2C to a microprocessor or microcontroller platform that exposes a parallel bus rather than dedicated I2C pins. Instead of emulating serial timing in software with multiple GPIO lines, the controller manages the I2C protocol and can buffer data for transfer to the host. This architecture suits established industrial platforms being updated with modern sensors or memories. Software designers should map the host handshake and interrupt behavior, verify reset semantics, and check whether existing address assignments conflict with newly attached I2C devices.

🧩

Embedded Peripheral Expansion

The PCA9665N is applicable to embedded systems that need multiple serial peripherals while retaining a parallel-bus controller. General Call support can help coordinate devices that recognize the reserved general-call address, and software reset over the parallel bus provides a host-controlled recovery mechanism. The 68-byte buffer accommodates burst-oriented transfers, and the ability to choose interrupt-driven or polled operation lets firmware balance latency against processor utilization. System validation should cover address conflicts, bus recovery after a slave holds SDA low, and the effect of pull-up resistance on signal rise time.

🔧

Prototype and Legacy Through-Hole Assemblies

The 20-pin DIP package makes the PCA9665N convenient for prototypes, educational platforms, and industrial boards assembled with through-hole components. It allows an engineer to prototype a parallel-to-I2C interface on a perforated board before committing to a compact surface-mount PCB. The industrial-grade designation and 2.5 V or 3.3 V operation make it relevant to controlled laboratory and factory equipment, but designers should still verify the exact temperature range and supply-current limits. Breadboard prototyping also requires careful decoupling and short I2C routing.

What is the PCA9665N and what does it do?
The PCA9665N is an NXP Semiconductors Fast-mode Plus controller that bridges an 8-bit parallel processor bus and an I2C bus. According to the NXP manufacturer datasheet, it can operate as either an I2C master or slave and transfers data on a byte or buffered basis using interrupt-driven or polled-handshake control. Its primary purpose is to let a parallel-bus microcontroller or microprocessor communicate with serial I2C peripherals while reducing direct GPIO use.
What is the maximum I2C data rate of the PCA9665N?
The PCA9665N supports I2C Fast-mode Plus operation at up to 1 MHz. The NXP manufacturer product page identifies 1 MHz as the maximum transmission speed for industrial communication designs. Operation at this rate requires every device on the bus to support Fast-mode Plus, and the SCL and SDA pull-up network must be selected for the actual bus capacitance and voltage. A nominal CPU clock alone does not guarantee reliable 1 MHz communication.
Where can I download the PCA9665N datasheet PDF?
The PCA9665N manufacturer documentation is available through the NXP PCA9665 and PCA9665A product page linked on this page. The manufacturer datasheet contains the electrical characteristics, register descriptions, timing diagrams, application information, and package details. Use that document for the authoritative pin assignments and operating limits. The PCA9665N is a 20-pin DIP device, so drawings for the SOIC, TSSOP, or HVQFN variants must not be used for its PCB footprint.
Where can I find the PCA9665N pinout?
The PCA9665N pinout is defined in the pin-description table and package drawing of the NXP manufacturer datasheet. The device is a 20-pin through-hole DIP, and every terminal must be checked against that table before designing a new board. The parallel-bus address, data, control, interrupt, and I2C signals are assigned to fixed pins, so changing package variants without remapping the PCB can produce incorrect bus operation or electrical damage.
What are the key specifications engineers should know about PCA9665N?
The main PCA9665N specifications are a 1 MHz maximum I2C rate, 25 mA SCL/SDA drive capability, a 68-byte data buffer, and operation as either an I2C master or slave. The NXP manufacturer product page also identifies General Call and parallel-bus software reset support. The device uses a 2.5 V or 3.3 V supply and is offered in a 20-pin industrial-grade through-hole DIP package, making bus compatibility and PCB form factor critical selection constraints.
Can the PCA9665N replace a PCA9564?
The PCA9665N may be considered for a parallel-bus controller upgrade because NXP states that the PCA9665 and PCA9665A share the PCA9564 footprint while adding features such as a 1 MHz data rate, 25 mA bus drive capability, a 68-byte buffer, General Call, and software reset. Final replacement still requires checking the exact package variant and pinout. A DIP PCA9665N cannot directly replace a surface-mount PCA9564 without changing the PCB footprint.
Is the PCA9665N the same as PCA9665A?
The PCA9665N and PCA9665A belong to the same NXP parallel-bus to I2C controller family, but the ordering suffix identifies different member options or package forms that must be matched separately. NXP groups the devices on one family product page and states that both share the PCA9564 footprint in applicable package variants. Engineers should compare the exact ordering code, package, pinout, supply range, and reset behavior rather than treating the family names as automatically interchangeable.
When should I choose the PCA9665N instead of another PCA9665 package?
Choose the PCA9665N when the system uses a 20-pin through-hole DIP footprint and benefits from a dedicated parallel-to-I2C bridge with operation up to 1 MHz. It is also appropriate when the host processor is a legacy parallel-bus microcontroller and interrupt or polled-handshake transfer modes are acceptable. Choose a SOIC, TSSOP, or HVQFN PCA9665 option when board area or surface-mount manufacturing requirements outweigh the convenience of the through-hole package.
Is the PCA9665N suitable for industrial control systems?
The PCA9665N is suitable for industrial control systems that use an 8-bit parallel host bus and need an I2C expansion interface. The manufacturer describes the device as industrial grade, supports I2C rates up to 1 MHz, and provides interrupt-driven operation for responsive control firmware. Industrial suitability still depends on the exact operating-temperature limits, system noise environment, external clock stability, and protection strategy specified for the assembled equipment.
What is the best drop-in replacement for PCA9665N?
No qualified drop-in replacement for the PCA9665N is established by the available manufacturer and cross-reference information. PCA9665BS, PCA9665D, and PCA9665PW use different packages, so they cannot replace the 20-pin DIP target without a PCB redesign. PCA9665N,112 represents the ordered suffix of the same device rather than a distinct engineering alternative. Before replacing the part, request a quote for the exact ordering code and validate continuity of supply and lifecycle status.
Can PCA9665BS, PCA9665D, or PCA9665PW replace PCA9665N?
No direct drop-in replacement is possible for PCA9665N,112 because PCA9665BS, PCA9665D, and PCA9665PW use different package formats. The available comparison information identifies PCA9665BS in an HVQFN package and PCA9665D in an SOIC package, while PCA9665PW is a surface-mount ordering option. These alternatives may provide similar controller functions, but they require footprint conversion and must be evaluated separately for pin compatibility, thermal performance, and assembly requirements.
How do pull-up resistors affect PCA9665N operation at 1 MHz?
The PCA9665N can operate up to 1 MHz, but achieving that rate requires a pull-up network appropriate for the I2C bus voltage, total capacitance, and worst-case leakage. Lower pull-up resistance can shorten rise times and reduce timing margin, while excessive resistance can slow the rising edge and cause data errors. The NXP manufacturer datasheet and I2C design guidance should be used to calculate the final resistance, then verified with an oscilloscope in the assembled PCB.
How much power does the PCA9665N consume?
The available product information identifies a 2.5 V or 3.3 V supply but does not state a complete current-consumption specification for every operating mode. Because the PCA9665N can operate as a master or slave and can remain active on the I2C bus, the final power budget should use the worst-case supply current from the manufacturer datasheet together with the actual bus loading. PCB thermal design should then account for the calculated dissipation and the surrounding enclosure temperature.
Where can I buy PCA9665N and check its price and lead time?
Use the Request a Quote form on this page to request the current PCA9665N price, stock position, manufacturer lead time, and order quantity. The form allows the exact suffix, package, and logistics requirements to be included in the request. Because component availability and commercial terms can change, request the quote for PCA9665N,112 if that is the complete ordering code shown on your production paperwork.
What should I check before using PCA9665N in a legacy parallel system?
Check the parallel-bus width, logic levels, addressing scheme, interrupt polarity, reset behavior, and I2C pull-up voltage before connecting the PCA9665N to an existing controller. The NXP manufacturer datasheet identifies byte or buffered transfers using interrupt or polled handshake, but legacy software may require a specific sequencing protocol. Validate the design with representative I2C peripherals, confirm startup behavior, and verify that the 1 MHz setting is appropriate for every device connected to the bus.

工程參考資料,適用於 PCA9665N — 比較、設計指引及合規資訊。

選型指南

Choose the PCA9665N when the design uses a 20-pin through-hole PCB footprint and needs to connect an 8-bit parallel-bus processor to an I2C bus. Its 1 MHz Fast-mode Plus operation, 68-byte buffer, selectable master or slave role, and interrupt or polled-handshake transfer modes make it suitable for legacy industrial controllers, test equipment, and embedded peripheral expansion. Choose a surface-mount PCA9665 option when board area or automated surface-mount assembly is more important than DIP compatibility. Do not select PCA9665BS, PCA9665D, or PCA9665PW as direct replacements because their packages differ and their PCB footprints must be verified. For new high-volume compact products, compare a smaller surface-mount controller against total board cost rather than assuming the legacy bridge is the lowest-cost solution.

與替代品比較

參數 本產品
Package 20-pin DIP
Brand NXP Semiconductors
Product Type Fast-mode Plus parallel-bus to I2C-bus controller
Maximum I2C Data Rate 1 MHz
SCL/SDA Drive Capability 25 mA
Data Buffer Size 68 byte
Supply Voltage 2.5 V or 3.3 V
I2C Operating Role Master or slave
Transfer Control Interrupt or polled handshake
Mounting Type Through-hole

主要差異化特點

  • Dedicated high-speed parallel-to-I2C conversion (對比PCA9665D,118)
  • Through-hole integration for legacy and industrial boards (對比PCA9665BS,118)
  • Family interface performance (對比PCA9665PW)

設計說明

Calculate the I2C pull-up resistance from the bus voltage, total capacitance, leakage current, and the required rise-time budget rather than selecting a common value by default. The PCA9665N supports operation up to 1 MHz, where excessive pull-up resistance can slow SCL or SDA rising edges and create communication errors. Keep SCL and SDA traces short, route them away from switching nodes, and inspect rise time, ringing, and timing margin on the assembled board with a suitable oscilloscope.

Treat the PCA9665N as a DIP-20 component and preserve the manufacturer package drawing when laying out the PCB. Place its decoupling capacitors close to the supply and ground pins, with the shortest practical return path to the supply reference. Because the device bridges a wide parallel bus with a high-speed serial bus, separate sensitive serial routing from noisy parallel-bus outputs where possible. Confirm logic-level compatibility of the parallel host before applying 2.5 V or 3.3 V signals.

Do not substitute PCA9665BS, PCA9665D, or PCA9665PW by MPN similarity alone. These ordering options use different packages and therefore require different PCB land patterns. Also avoid assuming every I2C peripheral can operate at 1 MHz: Fast-mode Plus support must be confirmed for each device. Finally, review General Call address use and the parallel-bus software reset behavior so that an initialization command cannot inadvertently address or reset an unintended peripheral.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page identifies industrial use but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to the stated industrial classification because automotive qualification was not identified.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

PCA9665N datasheet PCA9665N datasheet pdf PCA9665N pinout PCA9665N DIP-20 PCA9665N 1 MHz I2C PCA9665N parallel to I2C controller PCA9665N equivalent PCA9665N replacement PCA9665N cross reference PCA9665N vs PCA9665D PCA9665N price NXP PCA9665N

相關元件與詞彙

NXP Semiconductors PCA9665N PCA9665 PCA9665A PCA9665BS,118 PCA9665D,118 PCA9665PW PCA9564 I2C controller parallel-bus interface serial bus Fast-mode Plus FM+ SCL SDA General Call 68-byte buffer 20-pin DIP through-hole package industrial controller byte transfer buffered transfer interrupt polled handshake semiconductor
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情