NXP Semiconductors

PCA9675D - 16-Bit I/O Expander, 1 MHz | NXP

MPN: PCA9675D ✓ 啟用中
2.3 V to 5.5 V Vdss 24-pin SOIC, 7.50 mm width Package 1 MHz Speed
MOQ: 1 |

PCA9675D 概覽

The NXP Semiconductors PCA9675D is a remote 16-bit I/O expander for I2C buses, supporting clock speeds up to 1 MHz in a 24-pin SOIC package. It provides a Fast-mode Plus compatible interface, interrupt support, and general-purpose output expansion for microcontroller-based systems. The device is positioned as a drop-in upgrade for the PCF8575 while increasing I2C-bus speed from 400 kHz to 1 MHz and supporting PWM LED dimming.

An I/O expander is an interface IC that increases the number of general-purpose input or output lines available to a host microcontroller. By connecting these additional lines over a two-wire I2C bus, the PCA9675D reduces the pin count required on processors with limited direct I/O. It sits within the interface-IC hierarchy and connects a microcontroller to external indicator, lighting, switch, and control circuits without requiring a large number of host GPIO pins.

The principal features of the PCA9675D include 16 remotely controlled I/O lines, operation from a 2.3 V to 5.5 V supply range, and I2C communication up to 1 MHz. Its Fast-mode Plus capability is significant when the expanded outputs are used for LED PWM dimming because the system can update a larger number of outputs more rapidly than a conventional 400 kHz I2C implementation. The interrupt output provides a mechanism for notifying the host when a monitored input changes.

The PCA9675D is intended to work with most microcontroller families that support a compatible I2C interface. Its 24-pin SOIC package, 1 MHz bus capability, and 16-bit expansion make it suitable for applications where a conventional PCF8575-class expander would impose a lower 400 kHz bus limit. The device also supports both 30 mA I2C-bus drive and higher-bus-speed operation compared with the referenced PCF8575 architecture.

Typical applications include LED signs and displays, server and networking equipment, industrial control systems, PLC peripheral interfaces, cellular telephone equipment, gaming machines, and instrumentation or test equipment. In an LED dimming design, the host writes output states and PWM information over I2C, while the expander handles the timing and level conversion required by multiple external LED channels.

PCB design should preserve short I2C routing, minimize branch-stub length, and provide suitable pull-ups on SCL and SDA. Decoupling close to the supply pins is important for dependable operation in systems containing switching converters. Because the PCA9675D can source or sink substantial I2C current, bus capacitance, pull-up resistance, voltage level, and simultaneous operating current should be checked against the device limits before production release.

This page combines the manufacturer's product information, package and interface characteristics, replacement guidance, comparison parameters, and practical implementation considerations. It also identifies the important distinction between a genuine SOIC-24 drop-in alternative and options that require a different footprint, allowing engineers to make a board-level replacement decision without relying on generic cross-reference results.

直接替換替代品,適用於 PCA9675D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PCA9675D (相同外形與佔位) — 差異在於 I2C Bus Speed, Number of I/O Lines, Package, Package Type, RoHS Status.

Texas Instruments
I2C Bus Speed: 400 kHz fast mode
Number of I/O Lines: 16
Package: 24-pin SOIC
比較對象 PCA9675D →

PCF8575DW

✅ 直接替換
Texas Instruments
📦 SOIC-24
Remote 16-bit I2C/SMBus I/O expander · 16 · 2.5 V to 5.5 V · 400 kHz · I2C/SMBus · Open-drain · 3 · 8 devices

聯絡詢價

查看資料表 →

PCA9675D 規格

Product Type Remote 16-bit I/O expander
Number of I/O Lines 16 lines
Bus Interface I2C two-wire bidirectional bus
I2C Bus Speed 1 MHz
I2C Mode Fast-mode Plus (Fm+)
Supply Voltage Range 2.3 V to 5.5 V
I2C Bus Drive 30 mA
Interrupt Function Supported
封裝 24-pin SOIC, 7.50 mm width
Package Type 24-SO
Packaging Tube
安裝類型 Surface mount
RoHS 狀態 unknown
REACH Status unknown

PCA9675D 24-so 腳位配置指南

PCA9675D(24-so 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

PCA9675D 的 24-so 封裝腳位圖

無詳細腳位定義資料: PCA9675D.

請參閱 資料表 以查看完整腳位配置。

典型應用

PCA9675D 適用於 6 應用s: LED Sign and Display Control, PWM LED Dimming, Industrial Control Peripheral Expansion, PLC and Automation Interface Expansion, Server and Networking Equipment, Instrumentation and Test Equipment.

💡

LED Sign and Display Control

The PCA9675D fits LED sign and display controllers that need more output channels than the host microcontroller can provide directly. Its 16 remote I/O lines can distribute display-control signals across multiple board areas, while the 1 MHz Fast-mode Plus bus permits faster updates than the 400 kHz limit of the referenced PCF8575. This timing advantage is valuable when dimming or changing many LED states within a short refresh interval. The design must still verify the required drive topology, channel current, logic polarity, and grounding arrangement for the selected display drivers.

💡

PWM LED Dimming

The PCA9675D is well suited to multi-channel PWM LED dimming because it belongs to the Fast-mode Plus family and operates at up to 1 MHz over I2C. Compared with the PCF8575's 400 kHz maximum, the PCA9675D can communicate more output updates per refresh period, reducing the timing burden on the controlling microcontroller. Engineers should calculate the data-transfer time for the selected number of channels and confirm that external LED drivers accept the required PWM and enable timing.

🏭

Industrial Control Peripheral Expansion

The PCA9675D can expand a microcontroller used in industrial control equipment when the base processor has insufficient GPIO for relays, indicators, selectors, or isolated digital inputs. Its 16-bit remote I/O organization consolidates peripheral connections over SDA and SCL, reducing wiring and host-pin pressure. The 2.3 V to 5.5 V supply range supports common industrial logic levels, but the final system must account for isolation boundaries, relay-driver interfaces, surge conditions, and the voltage compatibility of every connected device.

🏭

PLC and Automation Interface Expansion

For PLC auxiliary I/O, the PCA9675D provides a way to add 16 remote lines to a microcontroller-based controller without assigning a dedicated host pin to every signal. The I2C interface simplifies the connection between the processor and a remote I/O section, while the interrupt output can alert the controller to a monitored input transition. In a production PLC design, validate the interrupt polarity, input thresholds, isolation architecture, and behavior during controller resets before the board is released.

🖥️

Server and Networking Equipment

The PCA9675D can serve as a remote I/O block in server and networking equipment where front-panel indicators, status lamps, control signals, or service switches exceed the practical GPIO allocation of a companion controller. Running the expansion bus at up to 1 MHz supports rapid updates for multiple status channels and helps separate short communication traces from longer remote I/O wiring. Designers should account for bus capacitance, pull-up selection, ground-return paths, and the high-current I2C drive capability when calculating the network topology.

🔧

Instrumentation and Test Equipment

The PCA9675D is useful in instrumentation and test equipment when front-panel switches, LEDs, relays, or status indicators exceed the available GPIO on a measurement controller. Its 16 remote lines can organize repetitive panel functions behind a single I2C connection, and the 1 MHz rate reduces controller idle time during frequent status refreshes. For laboratory and industrial test products, verify the logic thresholds, input-output direction control, interrupt response, and startup states against the instrument's safety and isolation requirements.

What is the PCA9675D used for?
The PCA9675D is a remote 16-bit I/O expander that adds 16 general-purpose I/O lines to a microcontroller through an I2C bus. According to the NXP product page, it works with most microcontroller families and supports LED PWM dimming, switch inputs, and remote control outputs. Its 1 MHz Fast-mode Plus interface can update expanded outputs faster than the 400 kHz interface used by the referenced PCF8575.
What is the I2C bus speed of the PCA9675D?
The PCA9675D supports I2C communication up to 1 MHz. NXP identifies the device as part of the Fast-mode Plus family and describes it as a drop-in upgrade for the PCF8575 because the maximum bus rate increases from 400 kHz to 1 MHz. This higher rate is particularly useful for multi-channel LED PWM dimming and systems that refresh numerous expanded output states.
What is the supply voltage range of the PCA9675D?
The PCA9675D operates from a 2.3 V minimum supply to a 5.5 V maximum supply. This range allows the expander to operate alongside both 3.3 V and 5 V microcontroller systems, subject to the voltage limits of every device connected to the same I2C bus. The manufacturer page confirms its Fast-mode Plus status and 1 MHz bus capability.
Where can I download the PCA9675D datasheet PDF?
The PCA9675D datasheet is available from the NXP product page at https://www.nxp.com/part/PCA9675D, with a mirrored PDF also listed by AllDataSheet. The manufacturer documentation describes the part as a remote 16-bit I/O expander for an Fm+ I2C bus with interrupt. Use the manufacturer document as the controlling reference for pin assignments, electrical limits, and application details.
Where can I find the PCA9675D pinout?
The PCA9675D pinout is found in the manufacturer's pin-description table and package drawing for the 24-pin SOIC. The device is listed in a 24-SO package and uses an I2C interface, 16 remote I/O lines, power connections, ground, and an interrupt function. Assign PCB tracks from the numbered package drawing rather than relying on generic SOIC-24 examples.
What is the difference between the PCA9675D and PCF8575?
The PCA9675D is a drop-in upgrade for the PCF8575 and raises I2C operation from 400 kHz to 1 MHz. NXP also identifies 30 mA I2C drive for the PCA9675D, compared with the lower drive of the PCF8575 architecture. Both provide 16 remote I/O lines, making the PCA9675D attractive when faster updates or LED PWM dimming are required.
PCA9675D vs PCF8575D — which is better for LED dimming?
The PCA9675D is better for LED dimming because its 1 MHz Fast-mode Plus I2C bus updates expanded outputs faster than the PCF8575's 400 kHz maximum. NXP specifically identifies PWM LED dimming as a benefit of the higher bus rate. The PCA9675D remains suitable as an upgrade when the board footprint and electrical interface match.
When should I choose the PCA9675D over a PCF8575D?
Choose the PCA9675D when the design benefits from a 1 MHz I2C bus, stronger 30 mA bus drive, or PWM LED dimming across 16 remote I/O lines. A PCF8575D remains reasonable when 400 kHz operation is sufficient and the established PCF8575 implementation already meets all system requirements. Confirm the package footprint and voltage compatibility before changing devices.
What is the best drop-in replacement for the PCA9675D?
The PCF8575D is a direct functional migration path identified by NXP, because the PCA9675D is described as a drop-in upgrade for the PCF8575. It retains the 16-line I/O-expansion role but reduces maximum I2C speed from 1 MHz to 400 kHz and changes bus-drive capability. Verify the exact SOIC footprint, logic levels, and application timing before substitution.
Can another manufacturer replace the PCA9675D?
A cross-manufacturer replacement should be selected only after its SOIC-24 footprint, 16 I/O architecture, pin mapping, address options, interrupt behavior, and electrical ratings are confirmed against the NXP datasheet. The manufacturer identifies the PCA9675D as an upgrade for the PCF8575, but that relationship does not by itself qualify every similarly described expander as a drop-in replacement.
Where can I buy the PCA9675D online?
Use the Request a Quote form on this page to request the PCA9675D, current lead time, stock status, and package quantity for your design. The request can be directed to the exact device and tube packaging needed by the assembly process. This avoids static stock or price information that may change without reflecting a firm order commitment.
How much does the PCA9675D cost?
The current unit price and volume tiers for the PCA9675D should be obtained through the Request a Quote form on this page. Price can vary with order quantity, packaging, component availability, and purchasing terms. Submit the required quantity and target package so the quotation reflects the actual production requirement.
What is the lead time and stock status for the PCA9675D?
Request the current lead time and stock status through the Request a Quote form on this page. Include the required quantity, tube packaging, target date, and any acceptable alternative date. The sourcing response can then confirm whether the manufacturer has an available allocation or requires a scheduled manufacturing plan.
Is the PCA9675D suitable for an LED sign or display controller?
Yes, the PCA9675D is suitable for an LED sign or display controller because it provides 16 remote I/O lines and supports I2C operation up to 1 MHz for faster output updates. Its Fast-mode Plus interface is specifically relevant to PWM LED dimming. Check channel current, polarity, thermal requirements, and bus loading against the selected LED driver architecture.
What key specifications should engineers know about the PCA9675D?
The key PCA9675D specifications are 16 remote I/O lines, a 2.3 V to 5.5 V supply range, I2C operation up to 1 MHz, 30 mA bus drive, and a 24-pin SOIC package. NXP positions the device as a drop-in upgrade for the PCF8575, with the main bus-rate increase from 400 kHz to 1 MHz. These parameters determine its suitability for LED dimming and general remote I/O expansion.

工程參考資料,適用於 PCA9675D — 比較、設計指引及合規資訊。

選型指南

Choose the PCA9675D when a design needs 16 remote I/O lines and can benefit from I2C operation up to 1 MHz, particularly for multi-channel LED PWM dimming or frequent status updates. Select the PCF8575D when its 400 kHz maximum bus rate is sufficient and an established PCF8575 implementation can be reused without changing timing or board layout. Because NXP describes the PCA9675D as a drop-in upgrade for the PCF8575, the migration can be attractive, but engineers must still confirm the exact SOIC-24 footprint, address behavior, logic levels, and interrupt implementation. The PCA9675D is not interchangeable with expander families that use a different pin arrangement or package, even when their I/O count and bus protocol appear similar.

與替代品比較

參數 本產品 PCF8575D
Package 24-pin SOIC 24-pin SOIC
Brand NXP Semiconductors NXP Semiconductors
Product Type Remote 16-bit I/O expander Remote 16-bit I/O expander
Number of I/O Lines 16 lines 16 lines
Maximum I2C Frequency 1 MHz 400 kHz
I2C Mode Fast-mode Plus Standard-mode and Fast-mode
LED PWM Dimming Support Supported through 1 MHz Fast-mode Plus operation Limited by 400 kHz I2C operation

主要差異化特點

  • Higher maximum I2C operating rate (對比PCF8575D)
  • Fast-mode Plus support for LED PWM updates (對比PCF8575D)
  • Direct migration within the NXP portfolio (對比PCF8575D)

設計說明

Route SDA and SCL as short, matched traces on the same board layer where practical, and minimize test pads, stubs, and branch connections. Place the pull-up resistors at the physical end of the bus rather than automatically at the controller. Bus capacitance, rise time, and pull-up strength must be evaluated together to remain compatible with 1 MHz operation.

Place the device's supply-decoupling capacitor close to the package supply and ground connections, and keep the return path short to avoid adding supply noise to the I2C interface. The PCA9675D supports a 2.3 V to 5.5 V supply range, but all devices sharing the bus must use a compatible logic voltage. Confirm the host and peripheral levels before connecting pull-ups.

Do not assume that any 16-bit I2C expander is a drop-in replacement. Verify the exact SOIC-24 footprint, pin mapping, I2C address behavior, port-direction control, interrupt polarity, supply limits, and output timing. The PCF8575D is the identified migration path, but its 400 kHz bus limit can make the PCA9675D necessary for time-critical LED dimming.

Calculate worst-case bus timing for the highest operating I2C rate, including capacitance from wiring and connected devices. The PCA9675D supports 1 MHz and 30 mA bus drive, but those capabilities do not eliminate the need for appropriate pull-up values. Use scope measurements at the slowest and fastest operating corners if the bus includes long cables or multiple branches.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the referenced material. The PCA9675D is an interface IC rather than a power semiconductor, so a safe-operating-area chart is not applicable.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

PCA9675D datasheet PCA9675D datasheet pdf PCA9675D pinout PCA9675D SOIC-24 PCA9675D 1 MHz I2C PCA9675D 2.3V 5.5V PCA9675D NXP PCA9675D vs PCF8575D PCA9675D drop-in replacement PCA9675D equivalent PCA9675D LED PWM dimming PCA9675D price PCA9675D stock PCA9675D application circuit

相關元件與詞彙

NXP Semiconductors PCA9675D PCA9675 PCF8575 PCF8575D 16-bit I/O expander interface IC I2C two-wire bidirectional bus Fast-mode Plus Fm+ 1 MHz 2.3 V to 5.5 V 30 mA I2C drive PWM LED dimming interrupt output SOIC-24 SOIC package family surface mount LED display industrial control PLC server equipment instrumentation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情