PCA9675D - 16-Bit I/O Expander, 1 MHz | NXP
料号: PCA9675D ✓ 量产中PCA9675D 概述
An I/O expander is an interface IC that increases the number of general-purpose input or output lines available to a host microcontroller. By connecting these additional lines over a two-wire I2C bus, the PCA9675D reduces the pin count required on processors with limited direct I/O. It sits within the interface-IC hierarchy and connects a microcontroller to external indicator, lighting, switch, and control circuits without requiring a large number of host GPIO pins.
The principal features of the PCA9675D include 16 remotely controlled I/O lines, operation from a 2.3 V to 5.5 V supply range, and I2C communication up to 1 MHz. Its Fast-mode Plus capability is significant when the expanded outputs are used for LED PWM dimming because the system can update a larger number of outputs more rapidly than a conventional 400 kHz I2C implementation. The interrupt output provides a mechanism for notifying the host when a monitored input changes.
The PCA9675D is intended to work with most microcontroller families that support a compatible I2C interface. Its 24-pin SOIC package, 1 MHz bus capability, and 16-bit expansion make it suitable for applications where a conventional PCF8575-class expander would impose a lower 400 kHz bus limit. The device also supports both 30 mA I2C-bus drive and higher-bus-speed operation compared with the referenced PCF8575 architecture.
Typical applications include LED signs and displays, server and networking equipment, industrial control systems, PLC peripheral interfaces, cellular telephone equipment, gaming machines, and instrumentation or test equipment. In an LED dimming design, the host writes output states and PWM information over I2C, while the expander handles the timing and level conversion required by multiple external LED channels.
PCB design should preserve short I2C routing, minimize branch-stub length, and provide suitable pull-ups on SCL and SDA. Decoupling close to the supply pins is important for dependable operation in systems containing switching converters. Because the PCA9675D can source or sink substantial I2C current, bus capacitance, pull-up resistance, voltage level, and simultaneous operating current should be checked against the device limits before production release.
This page combines the manufacturer's product information, package and interface characteristics, replacement guidance, comparison parameters, and practical implementation considerations. It also identifies the important distinction between a genuine SOIC-24 drop-in alternative and options that require a different footprint, allowing engineers to make a board-level replacement decision without relying on generic cross-reference results.
直接替换替代料: PCA9675D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PCA9675D (相同外形与封装尺寸) ——差异在于 I2C Bus Speed, Number of I/O Lines, Package, Package Type, RoHS Status.
PCA9675D 规格参数
| Product Type | Remote 16-bit I/O expander |
| Number of I/O Lines | 16 lines |
| Bus Interface | I2C two-wire bidirectional bus |
| I2C Bus Speed | 1 MHz |
| I2C Mode | Fast-mode Plus (Fm+) |
| Supply Voltage Range | 2.3 V to 5.5 V |
| I2C Bus Drive | 30 mA |
| Interrupt Function | Supported |
| 封装 | 24-pin SOIC, 7.50 mm width |
| Package Type | 24-SO |
| Packaging | Tube |
| 安装类型 | Surface mount |
| RoHS 状态 | unknown |
| REACH Status | unknown |
PCA9675D 24-so 引脚配置指南
PCA9675D(24-so 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: PCA9675D.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCA9675D 适用于 6 应用s: LED Sign and Display Control, PWM LED Dimming, Industrial Control Peripheral Expansion, PLC and Automation Interface Expansion, Server and Networking Equipment, Instrumentation and Test Equipment.
LED Sign and Display Control
The PCA9675D fits LED sign and display controllers that need more output channels than the host microcontroller can provide directly. Its 16 remote I/O lines can distribute display-control signals across multiple board areas, while the 1 MHz Fast-mode Plus bus permits faster updates than the 400 kHz limit of the referenced PCF8575. This timing advantage is valuable when dimming or changing many LED states within a short refresh interval. The design must still verify the required drive topology, channel current, logic polarity, and grounding arrangement for the selected display drivers.
推荐
PWM LED Dimming
The PCA9675D is well suited to multi-channel PWM LED dimming because it belongs to the Fast-mode Plus family and operates at up to 1 MHz over I2C. Compared with the PCF8575's 400 kHz maximum, the PCA9675D can communicate more output updates per refresh period, reducing the timing burden on the controlling microcontroller. Engineers should calculate the data-transfer time for the selected number of channels and confirm that external LED drivers accept the required PWM and enable timing.
推荐
Industrial Control Peripheral Expansion
The PCA9675D can expand a microcontroller used in industrial control equipment when the base processor has insufficient GPIO for relays, indicators, selectors, or isolated digital inputs. Its 16-bit remote I/O organization consolidates peripheral connections over SDA and SCL, reducing wiring and host-pin pressure. The 2.3 V to 5.5 V supply range supports common industrial logic levels, but the final system must account for isolation boundaries, relay-driver interfaces, surge conditions, and the voltage compatibility of every connected device.
推荐
PLC and Automation Interface Expansion
For PLC auxiliary I/O, the PCA9675D provides a way to add 16 remote lines to a microcontroller-based controller without assigning a dedicated host pin to every signal. The I2C interface simplifies the connection between the processor and a remote I/O section, while the interrupt output can alert the controller to a monitored input transition. In a production PLC design, validate the interrupt polarity, input thresholds, isolation architecture, and behavior during controller resets before the board is released.
推荐
Server and Networking Equipment
The PCA9675D can serve as a remote I/O block in server and networking equipment where front-panel indicators, status lamps, control signals, or service switches exceed the practical GPIO allocation of a companion controller. Running the expansion bus at up to 1 MHz supports rapid updates for multiple status channels and helps separate short communication traces from longer remote I/O wiring. Designers should account for bus capacitance, pull-up selection, ground-return paths, and the high-current I2C drive capability when calculating the network topology.
推荐
Instrumentation and Test Equipment
The PCA9675D is useful in instrumentation and test equipment when front-panel switches, LEDs, relays, or status indicators exceed the available GPIO on a measurement controller. Its 16 remote lines can organize repetitive panel functions behind a single I2C connection, and the 1 MHz rate reduces controller idle time during frequent status refreshes. For laboratory and industrial test products, verify the logic thresholds, input-output direction control, interrupt response, and startup states against the instrument's safety and isolation requirements.
推荐
推荐产品汇总
工程参考数据: PCA9675D ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PCF8575D |
|---|---|---|
| Package | 24-pin SOIC | 24-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Product Type | Remote 16-bit I/O expander | Remote 16-bit I/O expander |
| Number of I/O Lines | 16 lines | 16 lines |
| Maximum I2C Frequency | 1 MHz | 400 kHz |
| I2C Mode | Fast-mode Plus | Standard-mode and Fast-mode |
| LED PWM Dimming Support | Supported through 1 MHz Fast-mode Plus operation | Limited by 400 kHz I2C operation |
关键差异点
- Higher maximum I2C operating rate (对比 PCF8575D)
- Fast-mode Plus support for LED PWM updates (对比 PCF8575D)
- Direct migration within the NXP portfolio (对比 PCF8575D)
设计说明
Route SDA and SCL as short, matched traces on the same board layer where practical, and minimize test pads, stubs, and branch connections. Place the pull-up resistors at the physical end of the bus rather than automatically at the controller. Bus capacitance, rise time, and pull-up strength must be evaluated together to remain compatible with 1 MHz operation.
Place the device's supply-decoupling capacitor close to the package supply and ground connections, and keep the return path short to avoid adding supply noise to the I2C interface. The PCA9675D supports a 2.3 V to 5.5 V supply range, but all devices sharing the bus must use a compatible logic voltage. Confirm the host and peripheral levels before connecting pull-ups.
Do not assume that any 16-bit I2C expander is a drop-in replacement. Verify the exact SOIC-24 footprint, pin mapping, I2C address behavior, port-direction control, interrupt polarity, supply limits, and output timing. The PCF8575D is the identified migration path, but its 400 kHz bus limit can make the PCA9675D necessary for time-critical LED dimming.
Calculate worst-case bus timing for the highest operating I2C rate, including capacitance from wiring and connected devices. The PCA9675D supports 1 MHz and 30 mA bus drive, but those capabilities do not eliminate the need for appropriate pull-up values. Use scope measurements at the slowest and fastest operating corners if the bus includes long cables or multiple branches.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the referenced material. The PCA9675D is an interface IC rather than a power semiconductor, so a safe-operating-area chart is not applicable.