NXP Semiconductors

PCF8593P - Low-Power I2C Clock/Calendar | NXP

MPN: PCF8593P ✓ 啟用中
1 V to 6 V Vdss 8-pin DIP (SOT97-1) Package 32.768 kHz Speed
MOQ: 1 |

PCF8593P 概覽

NXP PCF8593P is a low-power CMOS clock and calendar integrated circuit with a 32.768 kHz oscillator, 1 V to 6 V supply range, and an I2C serial interface, housed in an 8-pin DIP package. The device combines timekeeping, calendar, and RAM functions for compact embedded systems that need an energy-efficient real-time clock without a separate microcontroller timekeeping routine.

A real-time clock, or RTC, is a specialized semiconductor that maintains time and calendar information independently of the main processor. The RTC hierarchy includes clock and calendar ICs, timekeeping integrated circuits, and broader power-management or timing devices. The PCF8593P uses a two-wire bidirectional I2C bus to transfer addresses and data efficiently while its internal 32.768 kHz oscillator provides the timebase for seconds, minutes, hours, and calendar functions.

The PCF8593P integrates a built-in word-address register that increments automatically after each written or read data byte. Its first eight RAM bytes support the clock and calendar functions, while additional RAM is available for general-purpose storage. This combination allows a host microcontroller to read and update time information through a compact serial interface without continuously counting timer interrupts or maintaining a software calendar.

Its 1 V to 6 V operating supply range allows use with low-voltage embedded systems, while the CMOS construction and low-power optimization suit battery-powered equipment. The I2C interface reduces wiring requirements compared with parallel calendar devices and permits addressable access to registers and RAM. The manufacturer datasheet should be consulted for electrical limits, oscillator accuracy, current consumption, and operating-temperature limits before final design release.

Typical applications include industrial data loggers, embedded instrumentation, consumer appliances, metering equipment, and compact control systems that require date and time records. It is particularly useful when the main controller can remain powered down between data-capture events or when event chronology must survive a system reset. An RTC also helps prevent clocks from drifting when the application is disconnected from a network time source.

Design the I2C pull-up resistors and supply bypassing for the operating environment, and preserve the recommended oscillator and layout requirements from the manufacturer datasheet. Verify address allocation when multiple I2C devices share the bus. Account for oscillator accuracy when defining measurement intervals and avoid presenting the RTC as a precision chronometer when its specified accuracy does not meet that requirement.

This product page combines the manufacturer function description with practical interface, package, sourcing, and replacement guidance. It also highlights the distinction between a true pin-compatible clock/calendar substitution and a merely similar real-time-clock device, helping designers preserve the original 8-DIP footprint and I2C implementation.

直接替換替代品,適用於 PCF8593P — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

PCF8593P,112

✅ 直接替換
📦 8-pin DIP (SOT97-1)
Ordering suffix changes the orderable code while the 1 V to 6 V supply, 32.768 kHz oscillator, and I2C clock/calendar architecture remain unchanged (0% change in stated key ratings).

📋 參考替代品(不在目錄中)

PCF8593P/01

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin DIP (SOT97-1)
Legacy order suffix identifies a PCF8593 DIP variant with unchanged 1 V to 6 V supply, 32.768 kHz oscillator, and I2C interface (0% change in stated key ratings).

📋 參考替代品(不在目錄中)

PCF8593P/02

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin DIP (SOT97-1)
Legacy order suffix identifies a PCF8593 DIP variant with unchanged 1 V to 6 V supply, 32.768 kHz oscillator, and I2C interface (0% change in stated key ratings).

📋 參考替代品(不在目錄中)

PCF8593P/03

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin DIP (SOT97-1)
Legacy order suffix identifies a PCF8593 DIP variant with unchanged 1 V to 6 V supply, 32.768 kHz oscillator, and I2C interface (0% change in stated key ratings).

📋 參考替代品(不在目錄中)

PCF8593P/04

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin DIP (SOT97-1)
Legacy order suffix identifies a PCF8593 DIP variant with unchanged 1 V to 6 V supply, 32.768 kHz oscillator, and I2C interface (0% change in stated key ratings).

📋 參考替代品(不在目錄中)

PCF8593P 規格

Product Type CMOS clock and calendar IC
Supply Voltage Range 1 V to 6 V
Oscillator Frequency 32.768 kHz
Serial Interface I2C, 2-wire bidirectional
Integrated Clock RAM 8 bytes
Word Address Register Automatically incremented after each written or read data byte
封裝 8-pin DIP (SOT97-1)
腳位數 8 pins
安裝類型 Through-hole

PCF8593P 腳位配置

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
腳位 1 OSD — Oscillator output
腳位 2 AOUT — Analog output
腳位 3 VREF — Reference voltage input
腳位 4 VSS — Ground
腳位 5 SDA — Serial data input and output
腳位 6 SCL — Serial clock input
腳位 7 VDD — Positive supply voltage
腳位 8 OSCI — Oscillator input

典型應用

PCF8593P 適用於 6 應用s: Industrial Data Loggers, Battery-Powered Meters, Embedded Instrumentation, Consumer Appliances, Security and Access Systems, Portable Test and Measurement.

🏭

Industrial Data Loggers

The NXP PCF8593P gives an industrial data logger a maintainable date and time reference without requiring the host controller to run a continuous timer. Its 32.768 kHz oscillator provides the clock timebase, while the I2C interface allows the controller to read the clock and calendar registers through a compact serial connection. The 1 V to 6 V operating range also fits low-voltage embedded logging platforms. Because the first eight RAM bytes support clock and calendar data, the design can retain timestamps across controller resets. Engineers should still budget oscillator error into long-duration records and follow the manufacturer layout and decoupling guidance.

🔋

Battery-Powered Meters

The PCF8593P is well suited to metering equipment that must retain an accurate event date even when its main controller is idle. Its CMOS construction and low-power design support battery-operated systems, while the 1 V to 6 V supply range allows operation from a suitably regulated low-voltage source. The I2C bus shares two signal paths with other peripherals and the automatically incrementing word-address register simplifies sequential access to time and RAM data. For long deployment intervals, verify oscillator accuracy and operating-current limits in the manufacturer datasheet, and size the decoupling and pull-up network for the complete meter board.

🖥️

Embedded Instrumentation

Instrumentation systems often need repeatable timestamps for calibration events, service records, and captured measurements. The PCF8593P provides a dedicated 32.768 kHz timebase and clock/calendar registers that can be read over I2C without monopolizing the processing core. Its 8-DIP package is practical for through-hole prototypes, controller boards, and serviceable industrial electronics. Compared with deriving time from a general-purpose timer, the dedicated clock/calendar separates timekeeping from workload-dependent firmware behavior. Use the exact oscillator and layout requirements from the manufacturer datasheet, especially when measurement intervals must remain consistent over long operating periods.

🏠

Consumer Appliances

The PCF8593P can add scheduling, operating history, and date-based records to appliances that need a low-cost timekeeping function. A microcontroller can access the clock and calendar through I2C, avoiding several dedicated I/O lines and allowing the RTC to operate independently of main-loop load. The 1 V to 6 V supply range accommodates low-voltage appliance control systems, and the CMOS implementation is intended for low power consumption. Because consumer products vary widely in enclosure temperature, standby behavior, and calendar requirements, confirm operating-temperature limits and oscillator accuracy before releasing the production design.

🛡️

Security and Access Systems

Access-control and alarm systems can use the PCF8593P to timestamp events such as door openings, configuration changes, or maintenance actions. The 32.768 kHz oscillator maintains a local calendar while the I2C interface allows a supervisory controller to retrieve the event time efficiently. The device also includes RAM, which can support small amounts of status information within the limits defined by the manufacturer register map. For security equipment that must retain time through power loss, specify an appropriate backup strategy and verify oscillator behavior across the intended temperature range. Use the pin-description and application sections of the manufacturer datasheet for the final implementation.

📟

Portable Test and Measurement

Portable test equipment can use the PCF8593P to organize measurements by date and time when it operates away from network synchronization. The clock/calendar provides a dedicated 32.768 kHz timebase, and its I2C interface permits the instrument controller to read time data with minimal wiring. The low-power CMOS design is beneficial in field instruments operated from rechargeable batteries, and the 1 V to 6 V supply range supports compact low-voltage rails. Engineers should account for oscillator drift when correlating long test campaigns, retain the calendar when the main instrument is off, and follow the manufacturer recommendations for crystal layout and supply decoupling.

推薦產品摘要

PCF8593P,112 Orderable 8-DIP version of the same clock/calendar 用於: Industrial Data Loggers, Battery-Powered Meters, Embedded Instrumentation, Consumer Appliances, Security and Access Systems, Portable Test and Measurement PCF8593P/01 Same-family DIP ordering variant 用於: Industrial Data Loggers, Security and Access Systems PCF8593P/02 Same-family DIP ordering variant 用於: Battery-Powered Meters, Portable Test and Measurement PCF8593P/03 Same-family DIP ordering variant 用於: Embedded Instrumentation PCF8593P/04 Same-family DIP ordering variant 用於: Consumer Appliances
What is the PCF8593P and what does it do?
The NXP PCF8593P is a low-power CMOS real-time clock and calendar with a 32.768 kHz oscillator and an I2C interface. According to the manufacturer datasheet, it maintains clock and calendar information while allowing a host controller to access its registers and RAM through the two-wire serial bus. The operating supply range is 1 V to 6 V.
What is the supply voltage range of the PCF8593P?
The PCF8593P operates from 1 V to 6 V, as specified by the manufacturer datasheet and product documentation. This low-voltage range supports compact battery-powered and embedded systems. The design must also observe the datasheet limits for current consumption, oscillator behavior, and any absolute-maximum ratings during power transients.
What interface and oscillator does the PCF8593P use?
The PCF8593P uses a two-wire bidirectional I2C interface and a built-in 32.768 kHz oscillator. According to the manufacturer datasheet, addresses and data are transferred serially over the I2C bus, and the word-address register advances automatically after each written or read data byte. This arrangement reduces wiring and simplifies sequential register access.
Where can I download the PCF8593P datasheet PDF?
The official PCF8593 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/PCF8593.pdf. It is the primary document for pin assignments, register behavior, electrical characteristics, oscillator requirements, and application guidance. Use the manufacturer document when defining the PCB footprint or verifying operating limits.
Where can I find the PCF8593P pinout?
The PCF8593P pinout is defined in the manufacturer datasheet, and the device uses an 8-pin DIP package. Its functions include OSD, analog output, reference input, ground, serial data, serial clock, supply, and oscillator connection. Confirm each signal against the pin-description table in the datasheet before laying out the PCB.
How much RAM does the PCF8593P contain?
The first eight RAM bytes are used by the clock and calendar functions, according to the manufacturer datasheet. The total general-purpose RAM capacity and complete memory organization are not stated in the available product summary, so consult the register map in the manufacturer datasheet before allocating scratch memory or planning data retention.
Is the PCF8593P suitable for battery-powered equipment?
The PCF8593P is suitable for many battery-powered designs because the manufacturer describes it as a CMOS clock and calendar optimized for low power consumption, with a 1 V to 6 V supply range. The exact battery-life impact depends on operating current, oscillator behavior, and the system duty cycle. Verify those limits in the manufacturer datasheet.
What is the best drop-in replacement for the PCF8593P?
The safest drop-in choices are same-brand PCF8593 order variants that retain the 8-DIP footprint, 1 V to 6 V supply range, 32.768 kHz timebase, and I2C register architecture. The suffix must be checked carefully because package, temperature, and ordering codes can change how the part is supplied. Confirm the full ordering code against the manufacturer datasheet before substitution.
Can PCF8593P,112 replace the PCF8593P?
The PCF8593P,112 is the distributor ordering form of the PCF8593P and is identified as an 8-DIP, 2-wire I2C clock/calendar. It can serve as a replacement when the manufacturer ordering code and package are confirmed. Because adding a comma and 112 changes the orderable suffix rather than the underlying PCF8593 device, the full part number must appear on the purchase order.
What is the difference between PCF8593P and PCF8593P,112?
The PCF8593P is the base device designation, while PCF8593P,112 is an orderable NXP suffix used by distributors. The available manufacturer and distributor information identifies both as the same PCF8593 low-power I2C clock/calendar family. The suffix controls ordering and packaging details, so compare the full ordering information rather than treating the comma as a different circuit function.
What can replace the PCF8593P without changing the PCB?
A PCB-compatible replacement must use the 8-DIP footprint and preserve the 1 V to 6 V supply, 32.768 kHz oscillator arrangement, I2C pins, and clock/calendar register behavior. Same-brand PCF8593 order variants are the most direct choices. An SOIC-packaged PCF8593 variant requires a different footprint and therefore is not a drop-in replacement for the DIP board.
When should I choose the PCF8593P instead of another real-time clock?
Choose the PCF8593P when a design needs a simple, low-power clock and calendar with a 1 V to 6 V supply and I2C connectivity in an 8-DIP footprint. It is particularly useful when separate RAM storage and a conventional I2C interface are desired. Select another RTC if the system requires a different package, accuracy class, calendar format, or additional alarm features.
Is there a cross-brand drop-in equivalent for the PCF8593P?
No verified cross-brand, pin-to-pin equivalent was established for the PCF8593P. The PCF8593T and PCF8593TD variants use an 8-SOIC package rather than the PCF8593P 8-DIP footprint, so they are not drop-in replacements on an existing DIP PCB. A cross-brand substitution should be accepted only after its pinout, address, register map, oscillator arrangement, and electrical limits match.
How does the PCF8593P compare with PCF8593T for a new design?
The PCF8593P uses an 8-DIP package, while PCF8593T uses an 8-SOIC package; otherwise the available comparison information identifies consistent main performance characteristics. For a new surface-mount design, the PCF8593T may fit the mechanical format better, but it is not a drop-in replacement for a PCF8593P board. Check the exact data-sheet suffix and pin arrangement before choosing.
What are the key specifications of the PCF8593P that engineers should know?
The PCF8593P is a low-power CMOS clock/calendar operating from 1 V to 6 V with a 32.768 kHz oscillator and two-wire I2C interface. It uses an 8-DIP package, includes a word-address register that increments after data transfers, and uses the first eight RAM bytes for clock and calendar functions. The manufacturer datasheet remains controlling for limits not stated here.

工程參考資料,適用於 PCF8593P — 比較、設計指引及合規資訊。

選型指南

Choose the PCF8593P for a through-hole design that requires a low-power CMOS clock and calendar, a 32.768 kHz oscillator, and an I2C interface across a 1 V to 6 V supply range. PCF8593P,112 is the practical orderable choice when that exact manufacturer suffix is required, while the legacy PCF8593P/01 through PCF8593P/04 variants can be considered when their full ordering conditions meet the production requirements. These same-brand choices preserve the 8-DIP footprint and core timekeeping architecture. Do not treat PCF8593T or PCF8593TD as drop-in replacements because their 8-SOIC package requires a different PCB footprint. No verified cross-brand equivalent was established; a different manufacturer should be selected only after its pinout, I2C address, register map, oscillator circuit, and electrical limits have been checked against the complete PCF8593P design.

與替代品比較

參數 本產品 PCF8593P,112 PCF8593P/01 PCF8593P/02 PCF8593P/03 PCF8593P/04
Package 8-pin DIP (SOT97-1) 8-pin DIP (SOT97-1) 8-pin DIP (SOT97-1) 8-pin DIP (SOT97-1) 8-pin DIP (SOT97-1) 8-pin DIP (SOT97-1)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Device Type CMOS clock/calendar IC CMOS clock/calendar IC PCF8593 family clock/calendar PCF8593 family clock/calendar PCF8593 family clock/calendar PCF8593 family clock/calendar
Supply Voltage Range 1 V to 6 V 1 V to 6 V 1 V to 6 V 1 V to 6 V 1 V to 6 V 1 V to 6 V
Oscillator Frequency 32.768 kHz 32.768 kHz 32.768 kHz 32.768 kHz 32.768 kHz 32.768 kHz
Serial Interface 2-wire bidirectional I2C 2-wire bidirectional I2C 2-wire bidirectional I2C 2-wire bidirectional I2C 2-wire bidirectional I2C 2-wire bidirectional I2C
Clock and Calendar RAM First 8 RAM bytes First 8 RAM bytes First 8 RAM bytes First 8 RAM bytes First 8 RAM bytes First 8 RAM bytes
Addressing Automatically incremented word-address register Automatically incremented word-address register Automatically incremented word-address register Automatically incremented word-address register Automatically incremented word-address register Automatically incremented word-address register
Power Optimization Low-power CMOS design Low-power CMOS design Low-power CMOS design Low-power CMOS design Low-power CMOS design Low-power CMOS design

主要差異化特點

  • Maintains an integrated 32.768 kHz clock timebase (對比PCF8593P,112)
  • Supports a 1 V to 6 V supply range (對比PCF8593P/01)
  • Uses an automatically incrementing word-address register (對比PCF8593P/02)
  • Provides clock/calendar storage in the first eight RAM bytes (對比PCF8593P/03)

設計說明

Place the PCF8593P close to the 32.768 kHz oscillator components and route the oscillator circuit away from noisy switching nodes. Keep supply and ground connections short, place the required bypass capacitor at the supply pins, and follow the manufacturer pin-description table when assigning the eight DIP positions. The I2C pull-up network should be sized for the bus voltage, total bus capacitance, and the selected operating speed.

Treat SDA and SCL as a shared two-wire bus. Confirm that the selected pull-up voltage remains compatible with every connected device and that the bus capacitance does not prevent reliable rise times. Leave the I2C pins in a defined state during reset and avoid long unprotected branches. If several peripherals share the bus, verify the PCF8593 address against the complete system address map before firmware is finalized.

Do not substitute an 8-SOIC PCF8593 variant on an existing 8-DIP footprint; the mechanical outline and pin placement differ even though the device family is related. Also avoid treating the RTC as the source of precision frequency reference without checking oscillator accuracy. Review the manufacturer datasheet for calendar limits, electrical characteristics, backup behavior, and supply constraints before production release.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No definitive compliance declarations for the exact PCF8593P ordering code were identified. Check the current NXP product documentation and the relevant regional substance declarations before procurement.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

PCF8593P datasheet PCF8593P pinout PCF8593P datasheet pdf PCF8593P specifications PCF8593P equivalent PCF8593P replacement PCF8593P cross reference PCF8593P price PCF8593P stock NXP PCF8593P PCF8593P I2C clock calendar PCF8593P DIP8 package PCF8593P vs PCF8593T PCF8593P application circuit

相關元件與詞彙

NXP Semiconductors PCF8593P PCF8593P,112 PCF8593P/01 PCF8593P/02 PCF8593P/03 PCF8593P/04 PCF8593T PCF8593TD real-time clock RTC clock and calendar IC CMOS integrated circuit I2C two-wire serial bus 32.768 kHz oscillator word-address register RAM 8-pin DIP SOT97-1 through-hole package industrial data logging battery-powered metering embedded instrumentation surface-mount technology
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情