PCF8593P - Low-Power I2C Clock/Calendar | NXP
MPN: PCF8593P ✓ פעילPCF8593P סקירה
A real-time clock, or RTC, is a specialized semiconductor that maintains time and calendar information independently of the main processor. The RTC hierarchy includes clock and calendar ICs, timekeeping integrated circuits, and broader power-management or timing devices. The PCF8593P uses a two-wire bidirectional I2C bus to transfer addresses and data efficiently while its internal 32.768 kHz oscillator provides the timebase for seconds, minutes, hours, and calendar functions.
The PCF8593P integrates a built-in word-address register that increments automatically after each written or read data byte. Its first eight RAM bytes support the clock and calendar functions, while additional RAM is available for general-purpose storage. This combination allows a host microcontroller to read and update time information through a compact serial interface without continuously counting timer interrupts or maintaining a software calendar.
Its 1 V to 6 V operating supply range allows use with low-voltage embedded systems, while the CMOS construction and low-power optimization suit battery-powered equipment. The I2C interface reduces wiring requirements compared with parallel calendar devices and permits addressable access to registers and RAM. The manufacturer datasheet should be consulted for electrical limits, oscillator accuracy, current consumption, and operating-temperature limits before final design release.
Typical applications include industrial data loggers, embedded instrumentation, consumer appliances, metering equipment, and compact control systems that require date and time records. It is particularly useful when the main controller can remain powered down between data-capture events or when event chronology must survive a system reset. An RTC also helps prevent clocks from drifting when the application is disconnected from a network time source.
Design the I2C pull-up resistors and supply bypassing for the operating environment, and preserve the recommended oscillator and layout requirements from the manufacturer datasheet. Verify address allocation when multiple I2C devices share the bus. Account for oscillator accuracy when defining measurement intervals and avoid presenting the RTC as a precision chronometer when its specified accuracy does not meet that requirement.
This product page combines the manufacturer function description with practical interface, package, sourcing, and replacement guidance. It also highlights the distinction between a true pin-compatible clock/calendar substitution and a merely similar real-time-clock device, helping designers preserve the original 8-DIP footprint and I2C implementation.
חלופות תחליף ישיר עבור PCF8593P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
PCF8593P,112
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCF8593P/01
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PCF8593P/02
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PCF8593P/03
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PCF8593P/04
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PCF8593P מפרטים
| Product Type | CMOS clock and calendar IC |
| Supply Voltage Range | 1 V to 6 V |
| Oscillator Frequency | 32.768 kHz |
| Serial Interface | I2C, 2-wire bidirectional |
| Integrated Clock RAM | 8 bytes |
| Word Address Register | Automatically incremented after each written or read data byte |
| מארז | 8-pin DIP (SOT97-1) |
| מספר פינים | 8 pins |
| סוג הרכבה | Through-hole |
תצורת פינים של PCF8593P
| פין 1 | OSD — Oscillator output |
| פין 2 | AOUT — Analog output |
| פין 3 | VREF — Reference voltage input |
| פין 4 | VSS — Ground |
| פין 5 | SDA — Serial data input and output |
| פין 6 | SCL — Serial clock input |
| פין 7 | VDD — Positive supply voltage |
| פין 8 | OSCI — Oscillator input |
יישומים טיפוסיים
PCF8593P מתאים עבור 6 יישוםs: Industrial Data Loggers, Battery-Powered Meters, Embedded Instrumentation, Consumer Appliances, Security and Access Systems, Portable Test and Measurement.
Industrial Data Loggers
The NXP PCF8593P gives an industrial data logger a maintainable date and time reference without requiring the host controller to run a continuous timer. Its 32.768 kHz oscillator provides the clock timebase, while the I2C interface allows the controller to read the clock and calendar registers through a compact serial connection. The 1 V to 6 V operating range also fits low-voltage embedded logging platforms. Because the first eight RAM bytes support clock and calendar data, the design can retain timestamps across controller resets. Engineers should still budget oscillator error into long-duration records and follow the manufacturer layout and decoupling guidance.
מומלץ
Battery-Powered Meters
The PCF8593P is well suited to metering equipment that must retain an accurate event date even when its main controller is idle. Its CMOS construction and low-power design support battery-operated systems, while the 1 V to 6 V supply range allows operation from a suitably regulated low-voltage source. The I2C bus shares two signal paths with other peripherals and the automatically incrementing word-address register simplifies sequential access to time and RAM data. For long deployment intervals, verify oscillator accuracy and operating-current limits in the manufacturer datasheet, and size the decoupling and pull-up network for the complete meter board.
מומלץ
Embedded Instrumentation
Instrumentation systems often need repeatable timestamps for calibration events, service records, and captured measurements. The PCF8593P provides a dedicated 32.768 kHz timebase and clock/calendar registers that can be read over I2C without monopolizing the processing core. Its 8-DIP package is practical for through-hole prototypes, controller boards, and serviceable industrial electronics. Compared with deriving time from a general-purpose timer, the dedicated clock/calendar separates timekeeping from workload-dependent firmware behavior. Use the exact oscillator and layout requirements from the manufacturer datasheet, especially when measurement intervals must remain consistent over long operating periods.
מומלץ
Consumer Appliances
The PCF8593P can add scheduling, operating history, and date-based records to appliances that need a low-cost timekeeping function. A microcontroller can access the clock and calendar through I2C, avoiding several dedicated I/O lines and allowing the RTC to operate independently of main-loop load. The 1 V to 6 V supply range accommodates low-voltage appliance control systems, and the CMOS implementation is intended for low power consumption. Because consumer products vary widely in enclosure temperature, standby behavior, and calendar requirements, confirm operating-temperature limits and oscillator accuracy before releasing the production design.
מומלץ
Security and Access Systems
Access-control and alarm systems can use the PCF8593P to timestamp events such as door openings, configuration changes, or maintenance actions. The 32.768 kHz oscillator maintains a local calendar while the I2C interface allows a supervisory controller to retrieve the event time efficiently. The device also includes RAM, which can support small amounts of status information within the limits defined by the manufacturer register map. For security equipment that must retain time through power loss, specify an appropriate backup strategy and verify oscillator behavior across the intended temperature range. Use the pin-description and application sections of the manufacturer datasheet for the final implementation.
מומלץ
Portable Test and Measurement
Portable test equipment can use the PCF8593P to organize measurements by date and time when it operates away from network synchronization. The clock/calendar provides a dedicated 32.768 kHz timebase, and its I2C interface permits the instrument controller to read time data with minimal wiring. The low-power CMOS design is beneficial in field instruments operated from rechargeable batteries, and the 1 V to 6 V supply range supports compact low-voltage rails. Engineers should account for oscillator drift when correlating long test campaigns, retain the calendar when the main instrument is off, and follow the manufacturer recommendations for crystal layout and supply decoupling.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PCF8593P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PCF8593P,112 | PCF8593P/01 | PCF8593P/02 | PCF8593P/03 | PCF8593P/04 |
|---|---|---|---|---|---|---|
| Package | 8-pin DIP (SOT97-1) | 8-pin DIP (SOT97-1) | 8-pin DIP (SOT97-1) | 8-pin DIP (SOT97-1) | 8-pin DIP (SOT97-1) | 8-pin DIP (SOT97-1) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Device Type | CMOS clock/calendar IC | CMOS clock/calendar IC | PCF8593 family clock/calendar | PCF8593 family clock/calendar | PCF8593 family clock/calendar | PCF8593 family clock/calendar |
| Supply Voltage Range | 1 V to 6 V | 1 V to 6 V | 1 V to 6 V | 1 V to 6 V | 1 V to 6 V | 1 V to 6 V |
| Oscillator Frequency | 32.768 kHz | 32.768 kHz | 32.768 kHz | 32.768 kHz | 32.768 kHz | 32.768 kHz |
| Serial Interface | 2-wire bidirectional I2C | 2-wire bidirectional I2C | 2-wire bidirectional I2C | 2-wire bidirectional I2C | 2-wire bidirectional I2C | 2-wire bidirectional I2C |
| Clock and Calendar RAM | First 8 RAM bytes | First 8 RAM bytes | First 8 RAM bytes | First 8 RAM bytes | First 8 RAM bytes | First 8 RAM bytes |
| Addressing | Automatically incremented word-address register | Automatically incremented word-address register | Automatically incremented word-address register | Automatically incremented word-address register | Automatically incremented word-address register | Automatically incremented word-address register |
| Power Optimization | Low-power CMOS design | Low-power CMOS design | Low-power CMOS design | Low-power CMOS design | Low-power CMOS design | Low-power CMOS design |
מבדילים עיקריים
- Maintains an integrated 32.768 kHz clock timebase (לעומתPCF8593P,112)
- Supports a 1 V to 6 V supply range (לעומתPCF8593P/01)
- Uses an automatically incrementing word-address register (לעומתPCF8593P/02)
- Provides clock/calendar storage in the first eight RAM bytes (לעומתPCF8593P/03)
הערות תכנון
Place the PCF8593P close to the 32.768 kHz oscillator components and route the oscillator circuit away from noisy switching nodes. Keep supply and ground connections short, place the required bypass capacitor at the supply pins, and follow the manufacturer pin-description table when assigning the eight DIP positions. The I2C pull-up network should be sized for the bus voltage, total bus capacitance, and the selected operating speed.
Treat SDA and SCL as a shared two-wire bus. Confirm that the selected pull-up voltage remains compatible with every connected device and that the bus capacitance does not prevent reliable rise times. Leave the I2C pins in a defined state during reset and avoid long unprotected branches. If several peripherals share the bus, verify the PCF8593 address against the complete system address map before firmware is finalized.
Do not substitute an 8-SOIC PCF8593 variant on an existing 8-DIP footprint; the mechanical outline and pin placement differ even though the device family is related. Also avoid treating the RTC as the source of precision frequency reference without checking oscillator accuracy. Review the manufacturer datasheet for calendar limits, electrical characteristics, backup behavior, and supply constraints before production release.
מידע על תאימות
No definitive compliance declarations for the exact PCF8593P ordering code were identified. Check the current NXP product documentation and the relevant regional substance declarations before procurement.