PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI
MPN: PCM1737EG4 ✓ 啟用中PCM1737EG4 概覽
A digital-to-analog converter, or DAC, reconstructs continuous analog waveforms from coded digital samples. Audio-capable DACs combine a multibit conversion core with digital audio interfaces, clocking, filtering, and output circuitry. The PCM1737EG4 is designed for stereo audio conversion where a compact surface-mount package, 24-bit resolution, and high-rate operation are important.
The principal identified features of PCM1737EG4 are 24-bit resolution, operation up to 192 kHz, and a 28-SSOP package. One product description identifies the converter as a 96 kHz stereo DAC, while another identifies the family as supporting 192 kHz sampling. Engineers should therefore use the PCM1737EG4 manufacturer datasheet for the exact supported data and clock-rate modes of the installed device.
The 28-SSOP package uses gull-wing leads and a stated width of 5.30 mm, making it suitable for conventional surface-mount PCB assembly. Its commercial temperature grade and digital audio conversion function distinguish it from general-purpose analog-to-digital converters and from lower-resolution legacy audio interfaces.
Typical uses include stereo audio digital-to-analog conversion, multimedia playback, active speaker systems, digital mixing consoles, and embedded audio equipment. In each case, the device can receive digital audio samples and provide differential or single-ended analog outputs according to the interface and output configuration specified by the manufacturer.
PCB design should preserve clean analog and digital separation, provide a low-impedance return path for all supply and ground pins, and place input and output capacitors close to their associated pins. Clock and data traces should be routed away from analog output nodes to reduce jitter pickup and unwanted coupling.
This page combines the verified PCM1737EG4 package, format, sampling-rate, and commercial-grade information with component comparisons, sourcing guidance, and practical integration notes. It also distinguishes confirmed pin-compatible options from alternatives that require changes to the PCB or audio interface.
直接替換替代品,適用於 PCM1737EG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1737EG4 (相同外形與佔位) — 差異在於 Converter Type, Resolution, Package.
PCM1737E
✅ 直接替換聯絡詢價
查看資料表 →PCM1737E/2K
✅ 直接替換聯絡詢價
查看資料表 →PCM1737EG4 最大額定值與電氣特性
| Converter Type | 24-bit stereo digital-to-analog converter |
| Maximum Sampling Rate | 192 kHz |
| Listed Sampling Rate | 96 kHz |
| 解析度 | 24 bits |
| Number of Channels | 2 channels |
| 封裝 | 28-SSOP, 5.30 mm body width |
| Terminal Count | 28 terminals |
| 安裝類型 | Surface mount |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Audio Interface | I2S |
PCM1737EG4 rectangular 腳位配置指南
PCM1737EG4(rectangular 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1737EG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1737EG4 適用於 6 應用s: High-Resolution Stereo Audio Playback, Digital Audio Mixer and Console, Active Speaker and Amplifier Interface, Multimedia and Network Audio Endpoint, Instrumentation and Test Signal Generation, Digital Recording Playback Monitor.
High-Resolution Stereo Audio Playback
The PCM1737EG4 fits stereo playback systems requiring 24-bit digital audio conversion and operation up to 192 kHz. It receives digital samples and clocking through its audio interface, then produces the analog signal used by the downstream amplifier and speaker stages. The 28-SSOP package also allows a compact converter section within consumer media equipment. The key design consideration is matching the source rate and supported digital interface to the device’s operating modes, while preserving a quiet analog return path from the converter to the output circuitry.
Digital Audio Mixer and Console
PCM1737EG4 can serve as a stereo output converter in a digital mixing console when the design requires high-resolution reconstruction of left- and right-channel program audio. Its 24-bit conversion format supports digital audio processing at up to 192 kHz, while the compact 28-SSOP package helps limit board area in multi-channel signal paths. Designers should isolate converter clock and data routing from sensitive analog nodes and verify output loading, filtering, and grounding against the manufacturer’s recommended application circuit before deploying multiple converter channels.
Active Speaker and Amplifier Interface
The PCM1737EG4 is appropriate for an active-speaker controller that receives digital audio from a host processor or network audio module. It performs the digital-to-analog conversion needed before a power amplifier drives the transducers, providing 24-bit resolution and up to 192 kHz operation in a compact package. For reliable results, keep the converter supply and ground planes low impedance, route high-frequency clock signals away from analog outputs, and select the analog output configuration that matches the downstream amplifier input.
Multimedia and Network Audio Endpoint
PCM1737EG4 can form the stereo audio output stage of a multimedia player or network audio endpoint where digital content arrives through an I2S-capable source. Its 24-bit resolution and 192 kHz rating provide a suitable conversion path for high-rate source material, while the 28-SSOP footprint supports compact board layouts. The implementation should treat the converter clock as a sensitive signal, use controlled impedance routing where required, and follow the manufacturer’s recommended decoupling and analog output network to avoid audible noise or instability.
Instrumentation and Test Signal Generation
PCM1737EG4 is suitable for test and measurement equipment that must convert stored or generated digital waveforms into stereo analog signals. The 24-bit resolution supports detailed numerical reconstruction, and operation up to 192 kHz supports fast waveform sequences. Equipment designers should account for the analog output network, clock jitter sensitivity, and output loading, using the manufacturer’s reference configuration to establish filtering and amplitude expectations. Stable grounding and separation between digital data paths and analog outputs are especially important when small test signals must remain accurate.
Digital Recording Playback Monitor
PCM1737EG4 can be used in a digital recording playback monitor to reconstruct stereo audio for comparison with the source or a reference signal. Its 24-bit conversion format and 192 kHz capability align with high-resolution monitoring workflows, and its 28-SSOP package supports compact multi-channel monitoring boards. The design should compare the converter output against the required monitoring bandwidth and dynamic range, account for the selected output mode, and provide separate analog and digital return paths to minimize contamination of the monitoring signal.
工程參考資料,適用於 PCM1737EG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1737E | PCM1737E/2K |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-SSOP | 28-SSOP | 28-SSOP |
| Converter Type | Stereo digital-to-analog converter | Stereo digital-to-analog converter | Stereo digital-to-analog converter |
| Resolution | 24 bits | 24 bits | 24 bits |
| Terminal Count | 28 terminals | 28 terminals | 28 terminals |
主要差異化特點
- Exact commercial-grade ordering identity (對比PCM1737E)
- Compact 28-SSOP implementation (對比PCM1737E/2K)
- High-rate stereo conversion capability (對比PCM1737E)
設計說明
Separate the digital data and clock routes from the analog output section. PCM1737EG4 combines high-rate digital activity with sensitive analog conversion, so place input and output components close to their associated pins and maintain a continuous, low-impedance ground reference. Avoid routing I2S clocks beneath analog output traces, and keep the analog return path short rather than sharing long paths with switching or processor currents.
Use the manufacturer’s recommended power architecture and decoupling arrangement for every supply pin. Place the closest bypass capacitor at the corresponding supply and ground pins, keep the loop area small, and provide adequate plane or trace capacity for digital-interface return current. Confirm the PCM1737EG4 supply limits, analog output mode, and external component values in the manufacturer datasheet before finalizing the power network.
Treat the audio clock as a critical signal because sampling timing affects the reproduced waveform. Use short routes, avoid unnecessary stubs and test-point discontinuities, and maintain continuous reference planes. Where the digital source is distant, assess source-synchronous timing margins and any required series termination. The 192 kHz operating capability should be validated across temperature, supply tolerance, and the actual source clock arrangement.
Do not treat a shared family name as proof of interchangeability. PCM1737E and PCM1737E/2K use different ordering codes, so verify pin functions, temperature grade, supply ratings, output mode, and package dimensions against the manufacturer datasheet. Also avoid substituting an SSOP package based only on terminal count; lead pitch, body dimensions, and exposed analog functions must match the existing PCB footprint.
合規資訊
The PCM1737EG4 is identified as a commercial-grade audio DAC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.