PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI
MPN: PCM1737EG4 ✓ فعالPCM1737EG4 جائزہ
A digital-to-analog converter, or DAC, reconstructs continuous analog waveforms from coded digital samples. Audio-capable DACs combine a multibit conversion core with digital audio interfaces, clocking, filtering, and output circuitry. The PCM1737EG4 is designed for stereo audio conversion where a compact surface-mount package, 24-bit resolution, and high-rate operation are important.
The principal identified features of PCM1737EG4 are 24-bit resolution, operation up to 192 kHz, and a 28-SSOP package. One product description identifies the converter as a 96 kHz stereo DAC, while another identifies the family as supporting 192 kHz sampling. Engineers should therefore use the PCM1737EG4 manufacturer datasheet for the exact supported data and clock-rate modes of the installed device.
The 28-SSOP package uses gull-wing leads and a stated width of 5.30 mm, making it suitable for conventional surface-mount PCB assembly. Its commercial temperature grade and digital audio conversion function distinguish it from general-purpose analog-to-digital converters and from lower-resolution legacy audio interfaces.
Typical uses include stereo audio digital-to-analog conversion, multimedia playback, active speaker systems, digital mixing consoles, and embedded audio equipment. In each case, the device can receive digital audio samples and provide differential or single-ended analog outputs according to the interface and output configuration specified by the manufacturer.
PCB design should preserve clean analog and digital separation, provide a low-impedance return path for all supply and ground pins, and place input and output capacitors close to their associated pins. Clock and data traces should be routed away from analog output nodes to reduce jitter pickup and unwanted coupling.
This page combines the verified PCM1737EG4 package, format, sampling-rate, and commercial-grade information with component comparisons, sourcing guidance, and practical integration notes. It also distinguishes confirmed pin-compatible options from alternatives that require changes to the PCB or audio interface.
کے لیے ڈراپ اِن متبادل PCM1737EG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PCM1737EG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Converter Type, Resolution, Package.
PCM1737E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PCM1737E/2K
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PCM1737EG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Converter Type | 24-bit stereo digital-to-analog converter |
| Maximum Sampling Rate | 192 kHz |
| Listed Sampling Rate | 96 kHz |
| ریزولوشن | 24 bits |
| Number of Channels | 2 channels |
| پیکیج | 28-SSOP, 5.30 mm body width |
| Terminal Count | 28 terminals |
| ماؤنٹنگ ٹائپ | Surface mount |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Audio Interface | I2S |
PCM1737EG4 rectangular پن کنفیگریشن گائیڈ
PCM1737EG4 (rectangular پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PCM1737EG4.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PCM1737EG4 کے لیے موزوں ہے 6 ایپلیکیشنs: High-Resolution Stereo Audio Playback, Digital Audio Mixer and Console, Active Speaker and Amplifier Interface, Multimedia and Network Audio Endpoint, Instrumentation and Test Signal Generation, Digital Recording Playback Monitor.
High-Resolution Stereo Audio Playback
The PCM1737EG4 fits stereo playback systems requiring 24-bit digital audio conversion and operation up to 192 kHz. It receives digital samples and clocking through its audio interface, then produces the analog signal used by the downstream amplifier and speaker stages. The 28-SSOP package also allows a compact converter section within consumer media equipment. The key design consideration is matching the source rate and supported digital interface to the device’s operating modes, while preserving a quiet analog return path from the converter to the output circuitry.
Digital Audio Mixer and Console
PCM1737EG4 can serve as a stereo output converter in a digital mixing console when the design requires high-resolution reconstruction of left- and right-channel program audio. Its 24-bit conversion format supports digital audio processing at up to 192 kHz, while the compact 28-SSOP package helps limit board area in multi-channel signal paths. Designers should isolate converter clock and data routing from sensitive analog nodes and verify output loading, filtering, and grounding against the manufacturer’s recommended application circuit before deploying multiple converter channels.
Active Speaker and Amplifier Interface
The PCM1737EG4 is appropriate for an active-speaker controller that receives digital audio from a host processor or network audio module. It performs the digital-to-analog conversion needed before a power amplifier drives the transducers, providing 24-bit resolution and up to 192 kHz operation in a compact package. For reliable results, keep the converter supply and ground planes low impedance, route high-frequency clock signals away from analog outputs, and select the analog output configuration that matches the downstream amplifier input.
Multimedia and Network Audio Endpoint
PCM1737EG4 can form the stereo audio output stage of a multimedia player or network audio endpoint where digital content arrives through an I2S-capable source. Its 24-bit resolution and 192 kHz rating provide a suitable conversion path for high-rate source material, while the 28-SSOP footprint supports compact board layouts. The implementation should treat the converter clock as a sensitive signal, use controlled impedance routing where required, and follow the manufacturer’s recommended decoupling and analog output network to avoid audible noise or instability.
Instrumentation and Test Signal Generation
PCM1737EG4 is suitable for test and measurement equipment that must convert stored or generated digital waveforms into stereo analog signals. The 24-bit resolution supports detailed numerical reconstruction, and operation up to 192 kHz supports fast waveform sequences. Equipment designers should account for the analog output network, clock jitter sensitivity, and output loading, using the manufacturer’s reference configuration to establish filtering and amplitude expectations. Stable grounding and separation between digital data paths and analog outputs are especially important when small test signals must remain accurate.
Digital Recording Playback Monitor
PCM1737EG4 can be used in a digital recording playback monitor to reconstruct stereo audio for comparison with the source or a reference signal. Its 24-bit conversion format and 192 kHz capability align with high-resolution monitoring workflows, and its 28-SSOP package supports compact multi-channel monitoring boards. The design should compare the converter output against the required monitoring bandwidth and dynamic range, account for the selected output mode, and provide separate analog and digital return paths to minimize contamination of the monitoring signal.
کے لیے انجینئرنگ ریفرنس ڈیٹا PCM1737EG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PCM1737E | PCM1737E/2K |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-SSOP | 28-SSOP | 28-SSOP |
| Converter Type | Stereo digital-to-analog converter | Stereo digital-to-analog converter | Stereo digital-to-analog converter |
| Resolution | 24 bits | 24 bits | 24 bits |
| Terminal Count | 28 terminals | 28 terminals | 28 terminals |
اہم امتیازی خصوصیات
- Exact commercial-grade ordering identity (بمقابلہPCM1737E)
- Compact 28-SSOP implementation (بمقابلہPCM1737E/2K)
- High-rate stereo conversion capability (بمقابلہPCM1737E)
ڈیزائن نوٹس
Separate the digital data and clock routes from the analog output section. PCM1737EG4 combines high-rate digital activity with sensitive analog conversion, so place input and output components close to their associated pins and maintain a continuous, low-impedance ground reference. Avoid routing I2S clocks beneath analog output traces, and keep the analog return path short rather than sharing long paths with switching or processor currents.
Use the manufacturer’s recommended power architecture and decoupling arrangement for every supply pin. Place the closest bypass capacitor at the corresponding supply and ground pins, keep the loop area small, and provide adequate plane or trace capacity for digital-interface return current. Confirm the PCM1737EG4 supply limits, analog output mode, and external component values in the manufacturer datasheet before finalizing the power network.
Treat the audio clock as a critical signal because sampling timing affects the reproduced waveform. Use short routes, avoid unnecessary stubs and test-point discontinuities, and maintain continuous reference planes. Where the digital source is distant, assess source-synchronous timing margins and any required series termination. The 192 kHz operating capability should be validated across temperature, supply tolerance, and the actual source clock arrangement.
Do not treat a shared family name as proof of interchangeability. PCM1737E and PCM1737E/2K use different ordering codes, so verify pin functions, temperature grade, supply ratings, output mode, and package dimensions against the manufacturer datasheet. Also avoid substituting an SSOP package based only on terminal count; lead pitch, body dimensions, and exposed analog functions must match the existing PCB footprint.
تعمیل کی معلومات
The PCM1737EG4 is identified as a commercial-grade audio DAC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.