PCM1771RGA - 24-Bit Stereo Audio DAC with Headphone Amp | TI
MPN: PCM1771RGA ✓ 啟用中PCM1771RGA 概覽
An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage waveform suitable for amplification, loudspeaker drive, or headphone output. PCM1771 belongs to the DAC hierarchy within audio converters, ADC/DAC integrated circuits, and broader semiconductor components. Its integrated headphone circuitry reduces the number of external analog-output stages needed in portable and multimedia equipment while retaining a compact surface-mount footprint.
Key features include 24-bit resolution, a maximum sampling rate of 50 kHz, 98 dB SNR, stereo DAC channels, an I2S-compatible digital interface, and a low-power CMOS implementation. The enhanced multilevel converter architecture uses noise shaping and multilevel amplitude quantization to improve dynamic performance. A hardware-control headphone-amplifier option supports systems requiring direct control of the headphone-output operating state.
The PCM1771 combines its digital input section, stereo conversion core, analog output circuitry, and headphone amplifier within one package. Its I2S interface allows connection to a digital-audio source such as a sound-card controller, portable-media processor, or audio interface. Noise shaping redistributes quantization noise away from the most perceptually important audio band, while 24-bit quantization supports a high-resolution representation of each sample. The 4.2 mm by 4.2 mm VQFN-20 package supports compact PCB layouts but requires careful exposed-pad thermal and layout management.
Typical applications include headphone-equipped portable players, digital audio accessories, multimedia speakers, USB or portable-audio interfaces, consumer electronics, and embedded audio systems. The integrated headphone stage is particularly useful when the design requires analog headphone output without a separate headphone-amplifier IC. Systems requiring simultaneous microphone capture and headphone playback should also evaluate the clocking, interface format, and analog routing of the complete design rather than assuming every codec requirement is covered.
The primary design considerations are correct I2S data and clock connections, compliant digital supply sequencing, analog-output filtering, and the PCB treatment of the VQFN exposed pad. Keep digital return currents away from the analog output and headphone-driver paths, place decoupling capacitors near their associated supply pins, and use a ground plane that does not split the return network beneath the converter. Confirm the selected output mode and filter components against the manufacturer datasheet before releasing a PCB layout.
This product data consolidates the exact PCM1771RGA package, interface, resolution, sampling, SNR, temperature, and conversion-architecture details with practical application guidance, sourcing instructions, and same-package family comparisons. It is designed to help engineers determine whether the converter suits a new audio design and how to evaluate qualified alternatives before committing a board layout.
直接替換替代品,適用於 PCM1771RGA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1771RGA (相同外形與佔位) — 差異在於 Number of DAC Channels, Package, Product Type.
PCM1770RGA
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1773RGAR
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1771RGA 最大額定值與電氣特性
| Product Type | Stereo audio digital-to-analog converter with headphone amplifier |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| Number of DAC Channels | 2 stereo channels |
| Headphone Amplifier | Integrated with hardware control |
| Conversion Architecture | Enhanced multilevel architecture with noise shaping and multilevel amplitude quantization |
| Process Technology | CMOS |
| 封裝 | 20-pin VQFN (RGA) |
| Package Dimensions | 4.2 mm x 4.2 mm |
| 腳位數 | 20 pins |
| 安裝類型 | Surface mount |
| 工作溫度 | 0 C to 70 C |
| Power Class | Low-power operation |
PCM1771RGA 4.2 mm x 4.2 mm 腳位配置指南
PCM1771RGA(4.2 mm x 4.2 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1771RGA.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1771RGA 適用於 6 應用s: Portable Headphone Audio Player, Digital Audio Interface, Multimedia Speaker System, USB Audio Accessory, Consumer Audio Embedded System, Broadcast and Studio Monitoring.
Portable Headphone Audio Player
The PCM1771RGA fits portable headphone equipment that accepts digital audio through I2S and needs a compact stereo analog-output stage. Its 24-bit conversion resolution, 50 kHz maximum sampling rate, and 98 dB SNR provide the core performance parameters for a low-noise playback path. The integrated headphone amplifier reduces the component count compared with a discrete DAC and separate headphone-driver design, while the 4.2 mm by 4.2 mm VQFN-20 package preserves board area. The 0 C to 70 C rating suits controlled consumer environments, but battery-operated products must verify supply range and total power consumption in the manufacturer data sheet.
推薦
Digital Audio Interface
PCM1771RGA is appropriate for a compact digital-to-analog interface that receives I2S audio from a USB controller, application processor, or digital-audio transceiver. The 24-bit stereo converter and 98 dB SNR provide a clear conversion specification, while the 50 kHz maximum sampling rate supports conventional audio-rate streams. Integrating headphone circuitry also enables a monitor-output implementation with fewer board-level blocks. Designers should treat the converter as a controlled analog signal path: isolate clocks and digital return currents from the output section, and validate output filtering, channel mapping, and headphone-load behavior with the application circuit.
推薦
Multimedia Speaker System
The PCM1771RGA can provide the stereo digital-to-analog conversion stage for a compact multimedia speaker or powered-audio system. Its 24-bit resolution and 98 dB SNR establish the conversion performance, while I2S allows direct connection to a digital-audio source without a parallel-data interface. The low-power CMOS implementation is useful where the speaker controller must operate within a limited power budget. For best results, place the analog outputs away from switching regulators and high-current amplifier traces, follow the specified output-filter network, and confirm that the headphone-amplifier section is configured appropriately for the intended output architecture.
推薦
USB Audio Accessory
PCM1771RGA suits a USB audio accessory that converts a digital playback stream into stereo analog sound for headphones or line-level circuitry. The I2S interface is well suited to common audio bridges, the 24-bit converter supports high-resolution playback, and the 98 dB SNR specification is appropriate for reducing digital-to-analog noise. Its small VQFN-20 package leaves room for USB-interface and power-supply components on a portable board. Layout should maintain short analog paths from the converter to the output stage, provide continuous ground references, and separate switching-converter current paths from the 24-bit audio conversion section.
推薦
Consumer Audio Embedded System
The PCM1771RGA is suitable for embedded consumer products that process audio digitally and require a compact stereo output with integrated headphone drive. The combination of a 24-bit converter, 50 kHz sampling capability, I2S connectivity, and integrated headphone circuitry makes it appropriate for appliances, personal-audio products, and compact control panels. The 0 C to 70 C specification fits room-temperature consumer environments, but enclosure temperature rise must remain within that range. Firmware should configure the digital stream and control pins to match the device interface, and the PCB should provide clean analog grounding and the manufacturer-specified output filtering.
推薦
Broadcast and Studio Monitoring
PCM1771RGA can support a compact monitoring path when the system uses 24-bit digital audio and requires a local headphone output from the converter. Its 98 dB SNR rating and 50 kHz maximum sampling rate provide useful baseline parameters for consumer-grade and space-constrained monitoring equipment. The integrated headphone amplifier is valuable for personal monitoring, although professional applications must separately verify noise, distortion, frequency response, channel separation, and output-drive requirements. Keep the digital audio source and converter clocking deterministic, use short analog routing, and validate the external reconstruction-filter network against the manufacturer's recommended circuit.
推薦
推薦產品摘要
工程參考資料,適用於 PCM1771RGA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1770RGA | PCM1773RGAR |
|---|---|---|---|
| Package | VQFN-20 (RGA), 4.2 mm x 4.2 mm | VQFN-20 (RGA) | VQFN-20 (RGA) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
主要差異化特點
- Documented hardware-controlled headphone-amplifier arrangement (對比PCM1770RGA)
- Manufacturer-specified 98 dB signal-to-noise ratio (對比PCM1770RGA)
- Common 20-pin RGA footprint with explicit 24-bit and 50 kHz positioning (對比PCM1773RGAR)
設計說明
Treat the PCM1771RGA as a mixed-signal device even though its digital interface is relatively simple. Route I2S data and clock signals away from the analog and headphone-output paths, provide a continuous ground reference, and place required bypass components at the pins specified by the manufacturer reference circuit. Confirm the exposed-pad net in the package drawing before connecting it to ground or a supply plane.
Use the manufacturer's clocking and digital-interface requirements to establish a stable sample clock and correct I2S word alignment. Grounding, shielding, and power-distribution design are especially important when the converter is mounted near a switching supply, radio-frequency section, or high-speed digital processor. Confirm output filtering and channel mapping with the reference design rather than assuming that identical I2S labels guarantee identical polarity or timing.
Do not treat a shared 20-pin RGA package as proof that any family member is automatically interchangeable. Before replacing PCM1771RGA with PCM1770RGA or PCM1773RGAR, compare power pins, ground connections, clock requirements, control polarity, headphone-output behavior, analog filters, and digital interface settings. Also check the exposed-pad electrical assignment and land pattern rather than relying only on the number of package leads.
合規資訊
The exact product information identifies a 0 C to 70 C commercial-temperature PCM1771RGA but does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this orderable device.