PCM1772RGA - 24-Bit Stereo DAC with Line-Out | Texas Instruments
MPN: PCM1772RGA ✓ 啟用中PCM1772RGA 概覽
A stereo DAC converts digital audio samples into analog voltage signals suitable for headphone, line-level, mixer, or amplifier inputs. Within the broader power-management and signal-chain hierarchy, the PCM1772 sits between a digital audio source and an analog output stage. Its integrated line-out circuitry reduces the need for a separate output buffer when the destination accepts line-level signals.
Key features include a 24-bit conversion interface, support for sampling rates through 50 kHz, a 98 dB SNR rating, integrated stereo line-out amplification, and software control of the line-out function. The low-power architecture targets portable and space-constrained audio equipment where converter efficiency, small package area, and short analog output paths are important.
The PCM1772 uses an enhanced multilevel delta-sigma conversion architecture designed to reduce noise and distortion. Its CMOS implementation combines the stereo converters, line-out circuitry, and support functions in one package. The 4.2 mm by 4.2 mm footprint supports compact designs while the 20-pin package exposes digital inputs, analog outputs, configuration control, and supply connections.
Typical applications include digital audio players, portable media equipment, USB and embedded audio accessories, soundbar signal chains, multimedia terminals, and consumer audio products requiring a low-power stereo DAC with integrated line outputs. The device is also suitable for prototype evaluation of interface-compatible audio architectures.
When laying out the circuit, keep the digital interface traces away from the analog output paths and provide local decoupling at the supply pins. The PCB footprint and exposed-pad or thermal-layout requirements must follow the package drawing in the manufacturer datasheet. Verify digital input levels, master-clock requirements, and output-loading conditions against the system audio specification before releasing the layout.
直接替換替代品,適用於 PCM1772RGA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1772RGA (相同外形與佔位) — 差異在於 Operating Temperature Range, Output Stage, Package.
PCM1773RGA
✅ 直接替換聯絡詢價
查看資料表 →PCM1770RGAR
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1772RGA 最大額定值與電氣特性
| Device Type | Stereo audio digital-to-analog converter with line-out amplifier |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Digital Audio Interface | I2S |
| Signal-to-Noise Ratio | 98 dB |
| Architecture | CMOS monolithic stereo DAC with enhanced multilevel delta-sigma conversion |
| Output Stage | Integrated stereo line-out amplifier with software control |
| 工作溫度範圍 | 0 C to 70 C |
| 封裝 | 20-pin VQFNP (RGA) |
| Package Dimensions | 4.2 mm x 4.2 mm |
| 安裝類型 | Surface mount |
| 腳位數 | 20 pins |
| Line-Out Control | Software control |
PCM1772RGA 4.2 mm x 4.2 mm 腳位配置指南
PCM1772RGA(4.2 mm x 4.2 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1772RGA.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1772RGA 適用於 8 應用s: Portable Digital Audio Player, USB Audio Accessory, Multimedia Soundbar Signal Chain, Embedded Audio Interface Module, Network Audio Decoder Card, Digital Audio Mixer and Equalizer Front End, Consumer Audio Evaluation Platform, Low-Power Analog Output Module.
Portable Digital Audio Player
The PCM1772RGA fits a portable digital audio player because it combines a 24-bit stereo converter with an integrated line-out amplifier in a compact 20-pin RGA package. Its I2S interface accepts digital samples at rates up to 50 kHz, while the 98 dB SNR rating provides useful headroom for consumer playback chains. The integrated output stage can feed a line input or headphone amplifier, reducing external buffer circuitry. Keep the I2S clock and data routes away from the analog outputs, and verify battery-rail headroom and supply-current behavior in the final product.
推薦
USB Audio Accessory
A USB audio accessory can use the PCM1772RGA as the analog output stage when the host interface already delivers I2S audio. The converter accepts 24-bit I2S data at sampling rates up to 50 kHz and provides stereo analog outputs with a 98 dB SNR rating. Its low-power CMOS implementation and 4.2 mm by 4.2 mm footprint suit compact adapters. The key board-level constraint is clock integrity: route the I2S data and master-clock signals away from the analog outputs and follow the manufacturer decoupling and exposed-pad recommendations.
推薦
Multimedia Soundbar Signal Chain
The PCM1772RGA is suitable for a multimedia soundbar module that requires a low-power stereo DAC but not a full audio codec. The device converts 24-bit I2S source data at up to 50 kHz and provides line-level analog outputs through its integrated line-out circuitry. This allows a design to place a class-D amplifier or analog mixer downstream. Maintain short analog traces, use a quiet ground reference for the output section, and confirm that the downstream input impedance matches the line-output loading conditions specified by the manufacturer.
推薦
Embedded Audio Interface Module
Embedded audio modules can use the PCM1772RGA when a processor or audio interface already outputs I2S data. The converter's 24-bit resolution, 50 kHz maximum sampling rate, and integrated stereo line outputs provide a compact analog endpoint without adding a separate ADC or output buffer. The small VQFNP-20 package supports dense module layouts, although thermal and exposed-pad treatment must follow the package drawing. Validate master-clock generation, reset behavior, and software register access during firmware bring-up.
推薦
Network Audio Decoder Card
The PCM1772RGA can serve as the audio output converter on a compact network-audio or streaming decoder card. I2S-compatible source data is converted into stereo analog signals, and the 98 dB SNR rating supports high-quality consumer listening while the low-power design remains suitable for space-constrained enclosures. Place the converter close to the output connector or downstream amplifier to minimize analog trace length. Decouple the supply locally and separate high-current digital return paths from the converter output reference to preserve performance.
推薦
Digital Audio Mixer and Equalizer Front End
The PCM1772RGA can provide the final conversion stage of a digital mixer or equalizer that processes audio in the digital domain before returning I2S data for analog playback. Its 24-bit interface and integrated line-out amplifier allow the design to concentrate mixing, filtering, and volume control in digital logic while retaining a simple analog output path. Keep the converter's analog output routing separated from switching regulators and high-speed digital buses, and test distortion and channel separation under the intended source impedance and output level.
推薦
Consumer Audio Evaluation Platform
An evaluation platform for consumer audio can use the PCM1772RGA to reproduce a realistic low-power stereo output stage. The 20-pin RGA package, 24-bit I2S interface, and line-out amplifier provide a convenient reference design for measuring channel performance and evaluating downstream amplifier loading. Use the manufacturer application circuit as the starting point, and preserve the specified component values, supply filtering, and clock topology so that prototype measurements reflect production behavior.
推薦
Low-Power Analog Output Module
The PCM1772RGA is appropriate for a low-power analog output module that accepts digital audio and provides line-level signals to a downstream amplifier. Its integrated line-out circuitry reduces the analog component count, while the compact surface-mount package simplifies module assembly. The rated 0 C to 70 C operating range supports consumer indoor equipment, but enclosure temperature, supply ripple, and output loading still require validation. Confirm the analog output reference and grounding arrangement against the manufacturer layout guidance.
推薦
推薦產品摘要
工程參考資料,適用於 PCM1772RGA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1773RGA | PCM1770RGAR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | VQFN-20 (RGA), 4.2 mm x 4.2 mm | VQFN-20 (RGA) - same package family | VQFN-20 (RGA) - same package family |
| Device Type | Stereo audio DAC with line-out amplifier | Stereo DAC with line-out circuitry | 24-bit low-power stereo DAC |
主要差異化特點
- Integrated software-controlled stereo line-out stage (對比PCM1770RGAR)
- Compact 20-pin RGA implementation with integrated analog output (對比PCM1773RGA)
- Documented 98 dB SNR and 50 kHz I2S conversion performance (對比PCM1770RGAR)
設計說明
Separate the digital and analog return paths as far as practical, and route the I2S data, master clock, and control signals away from the line-out traces. Place the device close to the output connector or downstream amplifier to minimize analog trace length. Use the manufacturer application circuit and pin-configuration diagram as the reference for component placement, since the exposed pad also has an electrical and thermal role in the RGA package.
Use local high-frequency bypass capacitors at the supply pins and follow the manufacturer recommendations for bulk capacitance. Supply ripple can appear directly in the analog output and degrade the 98 dB SNR system-level result. Estimated system noise contribution depends on the actual supply source, regulator output noise, and the values selected, so evaluate the complete power path rather than the converter in isolation.
Confirm master-clock amplitude, edge timing, and data alignment against the digital interface timing diagrams before PCB release. The 50 kHz maximum sampling-rate figure does not by itself define every supported clock mode. Keep the clock source and I2S lines away from the analog outputs, and confirm that downstream line-input loading does not violate the converter's output-stage conditions.
Do not treat a same-package family member as a guaranteed drop-in without reviewing pin assignments, register maps, and control polarity. PCM1772RGA, PCM1773RGA, and PCM1770RGAR are related devices, but line-out behavior and software configuration differ. Validate the full startup sequence, mute-state output, and channel mapping to prevent audible transients during initialization.
合規資訊
The operating-temperature range and environmental rating are stated on the manufacturer product page. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established and should be confirmed with the manufacturer.