Texas Instruments

PCM1772RGA - 24-Bit Stereo DAC with Line-Out | Texas Instruments

料号: PCM1772RGA ✓ 量产中
20-pin VQFNP (RGA) Package
最小起订量: 1 |

PCM1772RGA 概述

The Texas Instruments PCM1772RGA is a low-voltage, low-power CMOS stereo audio digital-to-analog converter with an integrated line-out amplifier. The device accepts 24-bit digital audio at sampling rates up to 50 kHz through an I2S interface and delivers a 98 dB signal-to-noise ratio according to the manufacturer product page. It is supplied in a 20-pin VQFNP (RGA) package measuring 4.2 mm by 4.2 mm.

A stereo DAC converts digital audio samples into analog voltage signals suitable for headphone, line-level, mixer, or amplifier inputs. Within the broader power-management and signal-chain hierarchy, the PCM1772 sits between a digital audio source and an analog output stage. Its integrated line-out circuitry reduces the need for a separate output buffer when the destination accepts line-level signals.

Key features include a 24-bit conversion interface, support for sampling rates through 50 kHz, a 98 dB SNR rating, integrated stereo line-out amplification, and software control of the line-out function. The low-power architecture targets portable and space-constrained audio equipment where converter efficiency, small package area, and short analog output paths are important.

The PCM1772 uses an enhanced multilevel delta-sigma conversion architecture designed to reduce noise and distortion. Its CMOS implementation combines the stereo converters, line-out circuitry, and support functions in one package. The 4.2 mm by 4.2 mm footprint supports compact designs while the 20-pin package exposes digital inputs, analog outputs, configuration control, and supply connections.

Typical applications include digital audio players, portable media equipment, USB and embedded audio accessories, soundbar signal chains, multimedia terminals, and consumer audio products requiring a low-power stereo DAC with integrated line outputs. The device is also suitable for prototype evaluation of interface-compatible audio architectures.

When laying out the circuit, keep the digital interface traces away from the analog output paths and provide local decoupling at the supply pins. The PCB footprint and exposed-pad or thermal-layout requirements must follow the package drawing in the manufacturer datasheet. Verify digital input levels, master-clock requirements, and output-loading conditions against the system audio specification before releasing the layout.

直接替换替代料: PCM1772RGA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM1772RGA (相同外形与封装尺寸) ——差异在于 Operating Temperature Range, Output Stage, Package.

Texas Instruments
Operating Temperature Range: 0 °C to +70 °C
Output Stage: Integrated stereo line-out amplifier
Package: 20-pin VQFN (RGA), 4.2 mm × 4.2 mm
对比 PCM1772RGA →

PCM1773RGA

✅ 直接替换
Texas Instruments
📦 VQFN-20 (RGA)
Stereo audio digital-to-analog converter with line-out amplifier · Texas Instruments · 2 channels · 24 bit · 50 kHz · 98 dB · I2S · Delta-sigma

联系询价

查看数据手册 →

PCM1770RGAR

✅ 直接替换
📦 VQFN-20 (RGA)
Same 20-pin VQFFN stereo-DAC footprint and 24-bit conversion class; feature configuration and software-control details differ

📋 参考替代料(不在目录中)

PCM1772RGA 最大额定值与电气特性

Device Type Stereo audio digital-to-analog converter with line-out amplifier
Converter Resolution 24 bit
Maximum Sampling Rate 50 kHz
Digital Audio Interface I2S
Signal-to-Noise Ratio 98 dB
Architecture CMOS monolithic stereo DAC with enhanced multilevel delta-sigma conversion
Output Stage Integrated stereo line-out amplifier with software control
工作温度范围 0 C to 70 C
封装 20-pin VQFNP (RGA)
Package Dimensions 4.2 mm x 4.2 mm
安装类型 Surface mount
引脚数 20 pins
Line-Out Control Software control

PCM1772RGA 4.2 mm x 4.2 mm 引脚配置指南

PCM1772RGA(4.2 mm x 4.2 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PCM1772RGA 的 4.2 mm x 4.2 mm 封装引脚图

暂无详细引脚数据: PCM1772RGA.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM1772RGA 适用于 8 应用s: Portable Digital Audio Player, USB Audio Accessory, Multimedia Soundbar Signal Chain, Embedded Audio Interface Module, Network Audio Decoder Card, Digital Audio Mixer and Equalizer Front End, Consumer Audio Evaluation Platform, Low-Power Analog Output Module.

📱

Portable Digital Audio Player

The PCM1772RGA fits a portable digital audio player because it combines a 24-bit stereo converter with an integrated line-out amplifier in a compact 20-pin RGA package. Its I2S interface accepts digital samples at rates up to 50 kHz, while the 98 dB SNR rating provides useful headroom for consumer playback chains. The integrated output stage can feed a line input or headphone amplifier, reducing external buffer circuitry. Keep the I2S clock and data routes away from the analog outputs, and verify battery-rail headroom and supply-current behavior in the final product.

🖥️

USB Audio Accessory

A USB audio accessory can use the PCM1772RGA as the analog output stage when the host interface already delivers I2S audio. The converter accepts 24-bit I2S data at sampling rates up to 50 kHz and provides stereo analog outputs with a 98 dB SNR rating. Its low-power CMOS implementation and 4.2 mm by 4.2 mm footprint suit compact adapters. The key board-level constraint is clock integrity: route the I2S data and master-clock signals away from the analog outputs and follow the manufacturer decoupling and exposed-pad recommendations.

📺

Multimedia Soundbar Signal Chain

The PCM1772RGA is suitable for a multimedia soundbar module that requires a low-power stereo DAC but not a full audio codec. The device converts 24-bit I2S source data at up to 50 kHz and provides line-level analog outputs through its integrated line-out circuitry. This allows a design to place a class-D amplifier or analog mixer downstream. Maintain short analog traces, use a quiet ground reference for the output section, and confirm that the downstream input impedance matches the line-output loading conditions specified by the manufacturer.

🧩

Embedded Audio Interface Module

Embedded audio modules can use the PCM1772RGA when a processor or audio interface already outputs I2S data. The converter's 24-bit resolution, 50 kHz maximum sampling rate, and integrated stereo line outputs provide a compact analog endpoint without adding a separate ADC or output buffer. The small VQFNP-20 package supports dense module layouts, although thermal and exposed-pad treatment must follow the package drawing. Validate master-clock generation, reset behavior, and software register access during firmware bring-up.

🌐

Network Audio Decoder Card

The PCM1772RGA can serve as the audio output converter on a compact network-audio or streaming decoder card. I2S-compatible source data is converted into stereo analog signals, and the 98 dB SNR rating supports high-quality consumer listening while the low-power design remains suitable for space-constrained enclosures. Place the converter close to the output connector or downstream amplifier to minimize analog trace length. Decouple the supply locally and separate high-current digital return paths from the converter output reference to preserve performance.

🎛️

Digital Audio Mixer and Equalizer Front End

The PCM1772RGA can provide the final conversion stage of a digital mixer or equalizer that processes audio in the digital domain before returning I2S data for analog playback. Its 24-bit interface and integrated line-out amplifier allow the design to concentrate mixing, filtering, and volume control in digital logic while retaining a simple analog output path. Keep the converter's analog output routing separated from switching regulators and high-speed digital buses, and test distortion and channel separation under the intended source impedance and output level.

🔧

Consumer Audio Evaluation Platform

An evaluation platform for consumer audio can use the PCM1772RGA to reproduce a realistic low-power stereo output stage. The 20-pin RGA package, 24-bit I2S interface, and line-out amplifier provide a convenient reference design for measuring channel performance and evaluating downstream amplifier loading. Use the manufacturer application circuit as the starting point, and preserve the specified component values, supply filtering, and clock topology so that prototype measurements reflect production behavior.

⚡

Low-Power Analog Output Module

The PCM1772RGA is appropriate for a low-power analog output module that accepts digital audio and provides line-level signals to a downstream amplifier. Its integrated line-out circuitry reduces the analog component count, while the compact surface-mount package simplifies module assembly. The rated 0 C to 70 C operating range supports consumer indoor equipment, but enclosure temperature, supply ripple, and output loading still require validation. Confirm the analog output reference and grounding arrangement against the manufacturer layout guidance.

What is the PCM1772RGA used for?
The PCM1772RGA is a low-power stereo audio DAC used to convert I2S digital audio into analog line-level outputs. According to the Texas Instruments product page, it is a 98 dB SNR device with integrated line-out amplification and software control, making it suitable for portable media equipment, audio accessories, multimedia systems, and other designs that need a compact stereo conversion stage.
What resolution and sampling rate does PCM1772RGA support?
The PCM1772RGA uses a 24-bit conversion interface and supports digital audio sampling rates up to 50 kHz. The DigiKey listing identifies the part as a 24-bit, 50 kHz I2S audio DAC, while the manufacturer describes the PCM1772 family as a low-voltage, low-power stereo converter. Exact supported master-clock configurations should be taken from the clocking table in the manufacturer datasheet.
Where can I download the PCM1772RGA datasheet PDF?
The official PCM1772RGA datasheet is available through the Texas Instruments PCM1772 product page and the manufacturer document link at https://www.ti.com/lit/ds/symlink/pcm1772.pdf. The document contains the recommended application circuit, digital interface timing, supply requirements, pin descriptions, and the VQFNP-20 land pattern needed for PCB implementation.
Where can I find the PCM1772RGA pinout?
The PCM1772RGA pinout is presented in the pin-configuration and pin-functions sections of the manufacturer datasheet. The device uses a 20-pin VQFNP RGA package, and the package drawing identifies the exposed pad and recommended footprint. Use that pin table when assigning the I2S inputs, line outputs, control signals, and supply connections on the PCB.
How do PCM1772RGA and PCM1773RGA compare?
PCM1772RGA and PCM1773RGA are closely related 20-pin stereo DACs from the same Texas Instruments family, and both use the RGA VQFNP package. The family differences include the line-out control implementation and associated feature configuration. Before substituting one for the other, compare the control-register behavior, digital timing, and output topology against the manufacturer datasheets.
Can PCM1770RGAR replace PCM1772RGA in an audio design?
PCM1770RGAR can be considered as a close same-package family alternative, but it should not be treated as an automatic substitution. The comparison data identifies both as 24-bit, low-power stereo DACs in 20-pin VQFFN packages, while the feature set and control behavior differ. Verify pin-level compatibility, clock requirements, and software configuration before redesigning an existing PCM1772RGA board.
What is the best drop-in replacement for PCM1772RGA?
No universally verified drop-in replacement is established for the PCM1772RGA. The closest documented candidates are same-package Texas Instruments family members, but their feature configurations and control behavior differ. Treat PCM1772RGAR as the identical ordering designation when the packing format is interchangeable, and use the TI cross-reference search or a detailed board-level comparison before choosing a functional substitute.
Is PCM1772RGA the same as PCM1772RGAR?
PCM1772RGAR denotes the reel-oriented ordering designation of the same PCM1772 device family, whereas PCM1772RGA identifies the 20-pin RGA package variant. Their electrical function is associated with the same underlying PCM1772 product, but the packing suffix can affect order quantities, carrier format, and handling. Confirm the required production packing format when placing an order.
When should I choose PCM1772RGA instead of a codec with an integrated ADC?
Choose the PCM1772RGA when the design requires only digital-to-analog conversion and already has a separate microphone or line-input path. Its 24-bit stereo DAC, integrated line-out amplifier, and compact 20-pin package reduce the analog output section. A combined codec is more appropriate when the same design also needs high-performance analog-to-digital conversion and shared clocking.
Is PCM1772RGA suitable for a portable audio product?
The PCM1772RGA is suitable for portable audio products because it is a low-voltage, low-power stereo DAC with a compact surface-mount package. Its integrated line-out circuitry can shorten the analog path and reduce board area, while the 98 dB SNR rating supports consumer audio signal chains. Validate battery-rail headroom, current consumption, and thermal performance in the final enclosure.
How do I decouple and lay out the PCM1772RGA analog output path?
Place the supply bypass capacitors close to the corresponding device pins and connect the exposed pad to the recommended ground or thermal land pattern shown in the manufacturer package drawing. Route the I2S and clock signals away from the analog output traces, use short output paths, and keep the line-out return close to the output signal. These steps reduce coupling from digital switching activity into the analog outputs.
What are the key specifications of PCM1772RGA that engineers should know?
The PCM1772RGA is a 24-bit stereo audio DAC with I2S input, sampling rates up to 50 kHz, a 98 dB SNR rating, and integrated line-out amplification with software control. It uses a CMOS monolithic architecture and is offered in a 20-pin 4.2 mm by 4.2 mm VQFNP RGA package. Its rated operating-temperature range is 0 C to 70 C.
What can replace PCM1772RGA in a pin-compatible redesign?
A pin-compatible redesign can evaluate PCM1773RGA and PCM1770RGAR because both are documented as 20-pin stereo DAC family members with related low-power conversion functions. Neither should be treated as a guaranteed drop-in without checking the pin table, control registers, master-clock requirements, and analog output configuration. A board respin or schematic change may be necessary if software control differs.
Is there a Cirrus Logic or Wolfson equivalent for PCM1772RGA?
No verified cross-brand equivalent for the PCM1772RGA is established. The cross-reference results contain general comparison tools rather than a manufacturer-confirmed pin-compatible substitute, and a same-package requirement must be met before any cross-brand part can be called a drop-in replacement. The closest alternatives remain the documented Texas Instruments family members pending a complete pin, timing, and control-signature review.
Where can I buy PCM1772RGA and check current availability?
Use the Request a Quote form on this page to request current pricing, stock confirmation, minimum order quantity, and lead time for the PCM1772RGA. The manufacturer lists the 20-pin RGA package option, and the required packing format should be stated on the request. Distributor listings can change continuously, so confirm allocation and delivery terms before releasing a production order.
What is the price of PCM1772RGA?
Submit a quote request through the Request a Quote form on this page for current PCM1772RGA pricing. Pricing depends on the exact ordering suffix, packing format, order quantity, and current supplier allocation. Because commercial terms can change daily and may be configured for quote-based purchasing, use the form rather than relying on a cached or historical price table.
What is the lead time for PCM1772RGA?
The current lead time for PCM1772RGA should be confirmed through the Request a Quote form on this page. Lead time can vary with the ordering suffix, packing format, quantity, and manufacturer allocation status. Include the required production quantity and date code requirements in the request so the supplier can confirm the appropriate schedule.

工程参考数据: PCM1772RGA ——对比、设计指导和合规信息。

选型指南

Choose PCM1772RGA when the design needs a 24-bit, 50 kHz-capable stereo I2S DAC with an integrated line-out amplifier, software output control, and a compact 20-pin RGA footprint. It is especially suitable for portable players, audio accessories, multimedia modules, and network-audio decoder cards where a standalone output stage is preferable to a combined codec. Consider PCM1773RGA when its documented control and line-out configuration better matches the intended software design, but verify pin and register compatibility before substitution. PCM1770RGAR is a same-package family candidate for a redesign, yet its feature differences require schematic and firmware review. No cross-brand drop-in equivalent is confirmed, so a converter from another manufacturer should not be selected as a footprint-compatible replacement without a complete datasheet-level comparison.

与替代料对比

参数 本产品 PCM1773RGA PCM1770RGAR
Brand Texas Instruments Texas Instruments Texas Instruments
Package VQFN-20 (RGA), 4.2 mm x 4.2 mm VQFN-20 (RGA) - same package family VQFN-20 (RGA) - same package family
Device Type Stereo audio DAC with line-out amplifier Stereo DAC with line-out circuitry 24-bit low-power stereo DAC

关键差异点

  • Integrated software-controlled stereo line-out stage (对比 PCM1770RGAR)
  • Compact 20-pin RGA implementation with integrated analog output (对比 PCM1773RGA)
  • Documented 98 dB SNR and 50 kHz I2S conversion performance (对比 PCM1770RGAR)

设计说明

Separate the digital and analog return paths as far as practical, and route the I2S data, master clock, and control signals away from the line-out traces. Place the device close to the output connector or downstream amplifier to minimize analog trace length. Use the manufacturer application circuit and pin-configuration diagram as the reference for component placement, since the exposed pad also has an electrical and thermal role in the RGA package.

Use local high-frequency bypass capacitors at the supply pins and follow the manufacturer recommendations for bulk capacitance. Supply ripple can appear directly in the analog output and degrade the 98 dB SNR system-level result. Estimated system noise contribution depends on the actual supply source, regulator output noise, and the values selected, so evaluate the complete power path rather than the converter in isolation.

Confirm master-clock amplitude, edge timing, and data alignment against the digital interface timing diagrams before PCB release. The 50 kHz maximum sampling-rate figure does not by itself define every supported clock mode. Keep the clock source and I2S lines away from the analog outputs, and confirm that downstream line-input loading does not violate the converter's output-stage conditions.

Do not treat a same-package family member as a guaranteed drop-in without reviewing pin assignments, register maps, and control polarity. PCM1772RGA, PCM1773RGA, and PCM1770RGAR are related devices, but line-out behavior and software configuration differ. Validate the full startup sequence, mute-state output, and channel mapping to prevent audible transients during initialization.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The operating-temperature range and environmental rating are stated on the manufacturer product page. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established and should be confirmed with the manufacturer.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PCM1772RGA PCM1772RGA datasheet PCM1772RGA datasheet pdf PCM1772RGA pinout Texas Instruments PCM1772RGA PCM1772RGA 24 bit stereo DAC PCM1772RGA 98 dB SNR PCM1772RGA VQFN-20 footprint PCM1772RGA line out amplifier PCM1772RGA vs PCM1773RGA PCM1772RGA vs PCM1770RGAR PCM1772RGA replacement PCM1772RGA cross reference PCM1772RGA price PCM1772RGA stock

相关元器件 & 术语

Texas Instruments PCM1772 PCM1772RGA PCM1773RGA PCM1770RGAR stereo audio DAC digital-to-analog converter audio codec I2S interface line-out amplifier 24-bit conversion 50 kHz sampling rate 98 dB signal-to-noise ratio enhanced multilevel delta-sigma architecture CMOS monolithic integrated circuit VQFN-20 VQFNP RGA package surface mount SMD package low-power audio conversion portable media equipment USB audio accessory multimedia soundbar network audio decoder digital audio mixer
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情