PCM55HP-1/1K - 16-Bit Audio DAC | Texas Instruments
MPN: PCM55HP-1/1K ✓ 啟用中PCM55HP-1/1K 概覽
A digital-to-analog converter, or DAC, transforms a binary numerical signal into a proportional analog voltage or current. Within the power-management and signal-chain hierarchy, the PCM55HP family belongs to the data-converter class of integrated circuits. Audio DACs are used to reconstruct sampled waveforms from digital audio systems, with converter resolution, dynamic range, harmonic distortion, and settling time determining how accurately the output represents the original signal.
The PCM55HP offers 16-bit input resolution, typical 15-bit monotonicity, approximately 96 dB dynamic range, and approximately −92 dB total harmonic distortion for the K grade. Its typical voltage-output settling time is 3 µs. These characteristics make the device suitable for digital audio synthesis, music equipment, instrumentation, communications, and industrial signal-generation systems where a parallel interface and bipolar analog output are appropriate.
The converter uses a parallel digital input rather than a serial audio interface. This architecture can simplify connections to digital signal processors, latch-based data sources, and custom digital audio systems, although it requires more signal traces than a serial DAC. The current-output stage also needs an appropriate output network and a suitable load or feedback arrangement to establish the required analog voltage and preserve signal integrity.
Typical applications include professional audio mixing equipment, digital synthesizers, multimedia playback systems, laboratory signal sources, and communication test equipment. Because the PCM55HP is a bipolar analog device, its supply requirements and output implementation differ from modern single-supply CMOS audio converters. Designs should verify logic-level compatibility, grounding, bypass-capacitor placement, and output-loading requirements before committing the circuit to a PCB.
For a new design, preserve the converter and its analog output path away from switching nodes and high-current return paths. Use short, properly referenced signal traces and follow the manufacturer datasheet for external components and pin assignments. Legacy parallel-interface parts should also be checked against current system timing, since bus skew and settling margins can become more restrictive as digital clock rates increase.
This page organizes the PCM55HP-1/1K specifications, package information, sourcing options, drop-in family alternatives, and practical implementation guidance. It also distinguishes verified converter characteristics from parameters that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.
直接替換替代品,適用於 PCM55HP-1/1K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM55HP-1/1K (相同外形與佔位) — 差異在於 Settling Time, Package, Supply Voltage, Total Harmonic Distortion, Resolution.
PCM55HP
✅ 直接替換聯絡詢價
查看資料表 →PCM55HP/1K
✅ 直接替換聯絡詢價
查看資料表 →PCM55HP-1
✅ 直接替換📋 參考替代品(不在目錄中)
PCM55HP-1/1K 最大額定值與電氣特性
| Converter Type | Monolithic audio digital-to-analog converter |
| 解析度 | 16 bit |
| Input Interface | Parallel |
| Number of Channels | 1 channel |
| 輸出類型 | Current output |
| Audio Output Current | ±1 mA |
| Monotonicity | 15 bit typical |
| Dynamic Range | 96 dB |
| Total Harmonic Distortion | −92 dB for K grade |
| Settling Time | 3 µs typical for voltage output |
| Supply Voltage Range | ±4.75 V to ±7.5 V |
| Analog Output Capability | ±12 V |
| 封裝 | 24-pin SOIC |
| Package Width | 7.50 mm |
| Nominal Body Width | 0.295 inch |
| 安裝類型 | Surface mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PCM55HP-1/1K 7.50 mm 腳位配置指南
PCM55HP-1/1K(7.50 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM55HP-1/1K.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM55HP-1/1K 適用於 6 應用s: Digital Audio Synthesis, Professional Audio Signal Generation, Multimedia Audio Playback, Instrumentation and Signal Sources, Communications Test Equipment, Industrial Audio Control.
Digital Audio Synthesis
The PCM55HP-1/1K suits digital synthesizers and electronic musical instruments that reconstruct sampled or computed waveforms through a parallel word interface. Its 16-bit resolution provides 65,536 code levels, while the documented 15-bit typical monotonicity and approximately 96 dB dynamic range support accurate amplitude representation. The converter can be placed after a DSP or digital latch, with its current-output stage feeding the output network specified by the manufacturer datasheet. Designers should preserve the 3 µs typical settling behavior when defining update timing and avoid placing the analog return path near digital switching currents.
推薦
Professional Audio Signal Generation
The PCM55HP-1/1K can provide the conversion stage in professional audio test and signal-generation equipment where precise digital-to-analog reconstruction is required. Its K-grade total harmonic distortion of approximately −92 dB, 16-bit input format, and ±1 mA output capability align with high-quality audio test paths. The parallel interface allows direct connection to parallel data sources, although timing-skew margins must be reviewed for modern high-speed digital systems. Use controlled grounding and short analog output routing, and confirm the external feedback or load network against the manufacturer application circuit.
推薦
Multimedia Audio Playback
PCM55HP-1/1K is applicable to legacy multimedia playback boards that use a 16-bit parallel digital audio stream and require a bipolar analog output. The documented dynamic range of approximately 96 dB and 15-bit typical monotonicity help preserve low-level signal detail, while the 3 µs typical voltage-output settling time supports standard audio-rate updates. Because the device uses ±4.75 V to ±7.5 V supplies, the receiving board must include suitable positive and negative rails. Interface timing, output loading, and the analog reconstruction network must be validated before this converter is used in a redesigned playback system.
推薦
Instrumentation and Signal Sources
The PCM55HP-1/1K can serve as the output converter in laboratory or industrial instrumentation that generates bipolar analog signals from parallel digital data. Its 16-bit resolution offers a practical balance between command resolution and legacy interface complexity, while typical 15-bit monotonicity supports predictable output steps. The device requires a bipolar supply architecture and a defined load or feedback arrangement, making power planning more demanding than with a modern single-supply CMOS DAC. Keep clock and data traces away from the sensitive current-output node, and evaluate the converter against the required bandwidth and distortion of the test signal.
推薦
Communications Test Equipment
The PCM55HP-1/1K is suited to communications test equipment that must convert parallel digital patterns into controlled analog waveforms. The approximately 96 dB dynamic range helps retain signal-to-noise performance, and the 3 µs typical settling time provides a defined basis for sequencing test tones or waveforms. The 24-pin SOIC footprint supports conventional surface-mount assembly, but the parallel interface requires careful bus routing and timing review. Designers should isolate the converter from transmitter clocks, switching regulators, and relay drivers, while using the manufacturer output circuit as the reference for impedance and distortion behavior.
推薦
Industrial Audio Control
The PCM55HP-1/1K can be used in industrial audio-control equipment where a controller generates an analog reference or monitoring waveform through a parallel digital port. The converter’s 16-bit format and typical 15-bit monotonicity provide repeatable digital-to-analog conversion for setpoint generation and audio-related control. Bipolar supplies at ±4.75 V to ±7.5 V and the ±1 mA output rating must be reconciled with the external analog circuit and load. Confirm the operating-temperature grade for the deployment environment, and use the datasheet pin and application tables when converting this legacy parallel-interface device into a new controller board.
推薦
推薦產品摘要
工程參考資料,適用於 PCM55HP-1/1K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM55HP | PCM55HP/1K | PCM55HP-1 | PCM55JP |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Interface | Parallel | Parallel | Parallel | Parallel | Parallel |
主要差異化特點
- Closest identified family replacement (對比PCM55HP)
- Directly related PCM55HP ordering format (對比PCM55HP/1K)
- Same-package family option with a distinct grade code (對比PCM55JP)
設計說明
Place the PCM55HP-1/1K, its decoupling network, and the analog output components away from switching nodes and high-current return paths. The manufacturer PCM54/PCM55 documentation specifically emphasizes isolation from RFI and EMI sources. Keep parallel data and clock routes short, provide a quiet return reference, and route the analog output away from digital buses to reduce coupling into the ±1 mA output stage.
Design the supply network for positive and negative rails between ±4.75 V and ±7.5 V. Place bypass capacitors close to the converter’s supply pins and follow the manufacturer recommended values and topology. Check startup behavior across both rails, including the possibility that one rail may be absent or outside its operating limit. The bipolar supply requirement is a primary distinction from modern single-supply audio converters.
Do not infer pin functions from the 24-pin package outline or from another grade with a similar orderable code. Use the manufacturer pin-description table to connect the clock, data, write control, power, ground, and output pins. Also verify whether an unused configuration pin must be actively tied to a defined level rather than left floating, as required by the device documentation.
Validate the parallel interface timing at the intended clock rate, including data setup and hold time, clock jitter, and bus skew. The converter’s typical 3 µs voltage-output settling time is separate from digital input timing and should not be used to infer permissible bus skew. Route the 16-bit data group consistently, use an appropriate source termination arrangement if required by the system, and keep clock away from the analog output.
The PCM55HP output is a current-output stage rated at ±1 mA. Reproduction or redesign requires the correct external load or feedback network; substituting an arbitrary resistive network can alter full-scale voltage, distortion, and settling behavior. Start with the manufacturer typical application circuit and then validate the complete output path for loading, bandwidth, offset, and distortion.
合規資訊
The device is an audio DAC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material-compliance documentation.