PCM55HP-1/1K - 16-Bit Audio DAC | Texas Instruments
MPN: PCM55HP-1/1K ✓ Hoạt độngPCM55HP-1/1K Tóm tắt
A digital-to-analog converter, or DAC, transforms a binary numerical signal into a proportional analog voltage or current. Within the power-management and signal-chain hierarchy, the PCM55HP family belongs to the data-converter class of integrated circuits. Audio DACs are used to reconstruct sampled waveforms from digital audio systems, with converter resolution, dynamic range, harmonic distortion, and settling time determining how accurately the output represents the original signal.
The PCM55HP offers 16-bit input resolution, typical 15-bit monotonicity, approximately 96 dB dynamic range, and approximately −92 dB total harmonic distortion for the K grade. Its typical voltage-output settling time is 3 µs. These characteristics make the device suitable for digital audio synthesis, music equipment, instrumentation, communications, and industrial signal-generation systems where a parallel interface and bipolar analog output are appropriate.
The converter uses a parallel digital input rather than a serial audio interface. This architecture can simplify connections to digital signal processors, latch-based data sources, and custom digital audio systems, although it requires more signal traces than a serial DAC. The current-output stage also needs an appropriate output network and a suitable load or feedback arrangement to establish the required analog voltage and preserve signal integrity.
Typical applications include professional audio mixing equipment, digital synthesizers, multimedia playback systems, laboratory signal sources, and communication test equipment. Because the PCM55HP is a bipolar analog device, its supply requirements and output implementation differ from modern single-supply CMOS audio converters. Designs should verify logic-level compatibility, grounding, bypass-capacitor placement, and output-loading requirements before committing the circuit to a PCB.
For a new design, preserve the converter and its analog output path away from switching nodes and high-current return paths. Use short, properly referenced signal traces and follow the manufacturer datasheet for external components and pin assignments. Legacy parallel-interface parts should also be checked against current system timing, since bus skew and settling margins can become more restrictive as digital clock rates increase.
This page organizes the PCM55HP-1/1K specifications, package information, sourcing options, drop-in family alternatives, and practical implementation guidance. It also distinguishes verified converter characteristics from parameters that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.
Bộ thay thế dễ dàng lắp đặt cho PCM55HP-1/1K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM55HP-1/1K (cùng hình factor và footprint) — khác nhau ở Settling Time, Package, Supply Voltage, Total Harmonic Distortion, Resolution.
PCM55HP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM55HP/1K
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM55HP-1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM55JP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM55HP-1/1K Tỷ lệ tối đa & tính chất điện
| Converter Type | Monolithic audio digital-to-analog converter |
| Độ phân giải | 16 bit |
| Input Interface | Parallel |
| Number of Channels | 1 channel |
| Kiểu đầu ra | Current output |
| Audio Output Current | ±1 mA |
| Monotonicity | 15 bit typical |
| Dynamic Range | 96 dB |
| Total Harmonic Distortion | −92 dB for K grade |
| Settling Time | 3 µs typical for voltage output |
| Supply Voltage Range | ±4.75 V to ±7.5 V |
| Analog Output Capability | ±12 V |
| Hộp | 24-pin SOIC |
| Package Width | 7.50 mm |
| Nominal Body Width | 0.295 inch |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân PCM55HP-1/1K 7.50 mm
Cấu hình chân cho PCM55HP-1/1K (7.50 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM55HP-1/1K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM55HP-1/1K phù hợp cho 6 Áp dụngs: Digital Audio Synthesis, Professional Audio Signal Generation, Multimedia Audio Playback, Instrumentation and Signal Sources, Communications Test Equipment, Industrial Audio Control.
Digital Audio Synthesis
The PCM55HP-1/1K suits digital synthesizers and electronic musical instruments that reconstruct sampled or computed waveforms through a parallel word interface. Its 16-bit resolution provides 65,536 code levels, while the documented 15-bit typical monotonicity and approximately 96 dB dynamic range support accurate amplitude representation. The converter can be placed after a DSP or digital latch, with its current-output stage feeding the output network specified by the manufacturer datasheet. Designers should preserve the 3 µs typical settling behavior when defining update timing and avoid placing the analog return path near digital switching currents.
Được đề xuất
Professional Audio Signal Generation
The PCM55HP-1/1K can provide the conversion stage in professional audio test and signal-generation equipment where precise digital-to-analog reconstruction is required. Its K-grade total harmonic distortion of approximately −92 dB, 16-bit input format, and ±1 mA output capability align with high-quality audio test paths. The parallel interface allows direct connection to parallel data sources, although timing-skew margins must be reviewed for modern high-speed digital systems. Use controlled grounding and short analog output routing, and confirm the external feedback or load network against the manufacturer application circuit.
Được đề xuất
Multimedia Audio Playback
PCM55HP-1/1K is applicable to legacy multimedia playback boards that use a 16-bit parallel digital audio stream and require a bipolar analog output. The documented dynamic range of approximately 96 dB and 15-bit typical monotonicity help preserve low-level signal detail, while the 3 µs typical voltage-output settling time supports standard audio-rate updates. Because the device uses ±4.75 V to ±7.5 V supplies, the receiving board must include suitable positive and negative rails. Interface timing, output loading, and the analog reconstruction network must be validated before this converter is used in a redesigned playback system.
Được đề xuất
Instrumentation and Signal Sources
The PCM55HP-1/1K can serve as the output converter in laboratory or industrial instrumentation that generates bipolar analog signals from parallel digital data. Its 16-bit resolution offers a practical balance between command resolution and legacy interface complexity, while typical 15-bit monotonicity supports predictable output steps. The device requires a bipolar supply architecture and a defined load or feedback arrangement, making power planning more demanding than with a modern single-supply CMOS DAC. Keep clock and data traces away from the sensitive current-output node, and evaluate the converter against the required bandwidth and distortion of the test signal.
Được đề xuất
Communications Test Equipment
The PCM55HP-1/1K is suited to communications test equipment that must convert parallel digital patterns into controlled analog waveforms. The approximately 96 dB dynamic range helps retain signal-to-noise performance, and the 3 µs typical settling time provides a defined basis for sequencing test tones or waveforms. The 24-pin SOIC footprint supports conventional surface-mount assembly, but the parallel interface requires careful bus routing and timing review. Designers should isolate the converter from transmitter clocks, switching regulators, and relay drivers, while using the manufacturer output circuit as the reference for impedance and distortion behavior.
Được đề xuất
Industrial Audio Control
The PCM55HP-1/1K can be used in industrial audio-control equipment where a controller generates an analog reference or monitoring waveform through a parallel digital port. The converter’s 16-bit format and typical 15-bit monotonicity provide repeatable digital-to-analog conversion for setpoint generation and audio-related control. Bipolar supplies at ±4.75 V to ±7.5 V and the ±1 mA output rating must be reconciled with the external analog circuit and load. Confirm the operating-temperature grade for the deployment environment, and use the datasheet pin and application tables when converting this legacy parallel-interface device into a new controller board.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM55HP-1/1K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM55HP | PCM55HP/1K | PCM55HP-1 | PCM55JP |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Interface | Parallel | Parallel | Parallel | Parallel | Parallel |
Bảo phân biệt quan trọng
- Closest identified family replacement (vsPCM55HP)
- Directly related PCM55HP ordering format (vsPCM55HP/1K)
- Same-package family option with a distinct grade code (vsPCM55JP)
Ghi chú thiết kế
Place the PCM55HP-1/1K, its decoupling network, and the analog output components away from switching nodes and high-current return paths. The manufacturer PCM54/PCM55 documentation specifically emphasizes isolation from RFI and EMI sources. Keep parallel data and clock routes short, provide a quiet return reference, and route the analog output away from digital buses to reduce coupling into the ±1 mA output stage.
Design the supply network for positive and negative rails between ±4.75 V and ±7.5 V. Place bypass capacitors close to the converter’s supply pins and follow the manufacturer recommended values and topology. Check startup behavior across both rails, including the possibility that one rail may be absent or outside its operating limit. The bipolar supply requirement is a primary distinction from modern single-supply audio converters.
Do not infer pin functions from the 24-pin package outline or from another grade with a similar orderable code. Use the manufacturer pin-description table to connect the clock, data, write control, power, ground, and output pins. Also verify whether an unused configuration pin must be actively tied to a defined level rather than left floating, as required by the device documentation.
Validate the parallel interface timing at the intended clock rate, including data setup and hold time, clock jitter, and bus skew. The converter’s typical 3 µs voltage-output settling time is separate from digital input timing and should not be used to infer permissible bus skew. Route the 16-bit data group consistently, use an appropriate source termination arrangement if required by the system, and keep clock away from the analog output.
The PCM55HP output is a current-output stage rated at ±1 mA. Reproduction or redesign requires the correct external load or feedback network; substituting an arbitrary resistive network can alter full-scale voltage, distortion, and settling behavior. Start with the manufacturer typical application circuit and then validate the complete output path for loading, bandwidth, offset, and distortion.
Thông tin tuân thủ
The device is an audio DAC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material-compliance documentation.