Silicon Labs

SI3050-E-GT - 3.3V Global Voice DAA | Silicon Labs

MPN: SI3050-E-GT ✗ 停產
3.3 V Vdss FCC, TBR21, JATE, and country-specific requirements Rds(on) 20-pin TSSOP Package
MOQ: 1 |

SI3050-E-GT 概覽

Silicon Labs SI3050-E-GT is a 3.3 V programmable global Voice Direct Access Arrangement (DAA) IC with a 20-pin TSSOP package. It provides the system-side analog FXO interface for voice-over-packet, voice-over-IP, and digital telephony equipment, while connecting to standard telephony PCM interfaces. The device is designed to replace discrete telephone-line interface circuitry with a programmable, integrated solution.

A Voice DAA is the analog interface between a telephone line and a digital voice processor. In the signal path, it supervises the line, detects seizure and off-hook conditions, handles hook-state transitions, and exposes the voice path to a digital PCM interface. The SI3050 belongs to the broader telecom-interface IC and Direct Access Arrangement hierarchy, placing it between a physical telephone network and a voice codec, DSP, or system controller.

The SI3050 is fully software programmable and supports country-specific PTT behavior. The manufacturer identifies compliance with FCC, TBR21, JATE, and other regional PTT requirements. Its global-programmability architecture is intended to accommodate differences in line-current detection, impedance, ring voltage, off-hook timing, and hook-state reporting without redesigning the analog telephone interface.

Silicon Labs patented isolation-capacitor technology is a major technical feature of the Si3050/Si3011/Si3018/Si3019 family. This approach removes the need for conventional isolation transformers, relays, or opto-isolators in the supported line interface, reducing board area and simplifying assembly while retaining the required separation between the telephone line and host circuitry. The companion Si3011, Si3018, or Si3019 device provides the line-side functions, while the SI3050 connects that interface to the digital side.

Typical uses include voice gateways, embedded voice servers, fax and multifunction-printer interfaces, VoIP terminal equipment, digital PBX peripheral modules, and caller-ID or message-waiting systems. The 3.3 V host supply and PCM-oriented digital interface are particularly suitable for modern processor-based communication equipment. Designers should still review the family data sheet for clocking, line-side companion selection, register programming, country configuration, and PCB layout requirements.

The SI3050-E-GT is specified in a 20-pin TSSOP package and is identified as revision E. Its lead-free construction is explicitly listed for the exact ordering code. Because legacy Voice DAA availability is limited, engineers should verify lifecycle status, supported software configuration, and the required companion line-side IC before committing a new design. This page combines exact ordering information, programmable Voice DAA characteristics, application guidance, and practical design considerations for engineers evaluating the SI3050-E-GT.

直接替換替代品,適用於 SI3050-E-GT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

SI3050-E1-GT

✅ 直接替換
📦 20-pin TSSOP
Revision E versus revision E1; core Voice DAA ratings remain within 0%, while firmware revision detection may differ

📋 參考替代品(不在目錄中)

SI3050-E-FT

✅ 直接替換
Skyworks Solutions
📦 20-pin TSSOP
System-side Direct Access Arrangement (DAA) voice interface IC · 3.3 V · 20-pin TSSOP, 4.40 mm width · Revision E · Foreign exchange office (FXO) analog interface · Integrated isolation-capacitor technology · Not required by the chipset architecture · Not required by the chipset architecture

聯絡詢價

查看資料表 →

SI3050-E1-FT

✅ 直接替換
📦 20-pin TSSOP
Revision E1/F ordering code versus revision E; revision and configuration differ by approximately 10% within the same Voice DAA family

📋 參考替代品(不在目錄中)

SI3050-E1-FTR

✅ 直接替換
📦 20-pin TSSOP
Revision E1/F ordering code versus revision E; revision differs while electrical ratings are unchanged, with R indicating reel packaging

📋 參考替代品(不在目錄中)

SI3050-E-FTR

✅ 直接替換
📦 20-pin TSSOP
Revision F versus revision E; revision differs while electrical ratings are unchanged, with R indicating reel packaging

📋 參考替代品(不在目錄中)

SI3050-E-GT 規格

Product Type Programmable Voice Direct Access Arrangement (DAA)
供應電壓 3.3 V
封裝 20-pin TSSOP
安裝類型 Surface mount
Device Revision Revision E
Digital Interface Standard telephony PCM interface
Line Interface System-side FXO analog interface
Programmability Software programmable
Isolation Method Patented isolation capacitor technology
Required Line-Side Companion Si3011, Si3018, or Si3019
FCC Compliance FCC Parts 15 and 68
European Emissions Compliance EN55022
European Immunity Compliance EN55024
PTT Standards FCC, TBR21, JATE, and country-specific requirements
Lead-Free Construction Lead-free

SI3050-E-GT 20-pin tssop 腳位配置指南

SI3050-E-GT(20-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

SI3050-E-GT 的 20-pin tssop 封裝腳位圖

無詳細腳位定義資料: SI3050-E-GT.

請參閱 資料表 以查看完整腳位配置。

典型應用

SI3050-E-GT 適用於 6 應用s: Voice-over-IP Terminals, Voice Gateway Equipment, Multifunction Printer Fax Modules, Digital PBX Peripheral Cards, Analog Caller-ID Systems, Industrial Telephone Monitoring.

🌐

Voice-over-IP Terminals

The SI3050-E-GT fits a Voice-over-IP terminal that must connect an analog telephone line to a digital voice subsystem. Its 3.3 V host-side operation and standard telephony PCM interface allow a codec or DSP to handle digitized voice while the SI3050 manages the system side of the programmable FXO interface. Software-configurable PTT behavior is valuable when one product family must support different international line requirements. The Si3050 and Si3011/18/19 family data sheet identifies FCC, TBR21, JATE, and country-specific support, reducing the need for separate analog interface boards. Designers must select the appropriate line-side companion and implement the recommended isolation-capacitor layout.

📞

Voice Gateway Equipment

A voice gateway can place the SI3050-E-GT between an FXO line and a PCM-based processor interface. The IC provides the system-side portion of a programmable global Voice DAA solution and supports standardized hook-state and line supervision behavior. This is useful when a gateway must meet more than one regional PTT specification without redesigning the analog front end. According to the Si3050 family data sheet, the architecture supports FCC Parts 15 and 68, EN55022, EN55024, TBR21, JATE, and other country-specific requirements. The primary implementation constraint is matching the correct Si3011, Si3018, or Si3019 line-side companion and validating the exact regional configuration before production.

🖨️

Multifunction Printer Fax Modules

The SI3050-E-GT is suitable for a multifunction-printer fax or telephone module requiring an analog FXO path alongside digital document processing. Software programmability permits configuration of line behavior for the intended market, while the standard telephony PCM interface can connect the voice path to a dedicated modem, codec, or DSP. The isolation-capacitor approach used by the Si3050 family removes conventional isolation transformers, relays, and opto-isolators from the supported design, conserving board area in compact printer electronics. Engineering validation should include line-voltage protection, ring detection, hook-state timing, and the required Si3011/18/19 companion. Firmware must also support the exact installed SI3050 revision.

🏢

Digital PBX Peripheral Cards

A digital PBX peripheral card can use the SI3050-E-GT to add one or more analog FXO channels to a processor-based line-card design. The system-side device operates from 3.3 V and interfaces through a standard telephony PCM connection, allowing shared codecs and digital switching logic to handle the voice path. Programmable PTT behavior is especially useful for multi-country PBX installations because line supervision and regional requirements can be adjusted in software. The Si3050 family data sheet also describes compliance work covering high-voltage surges, emissions, immunity, out-of-band energy, and safety. Each analog channel still requires its designated Si3011, Si3018, or Si3019 line-side device and the associated protection network defined by the reference design.

📱

Analog Caller-ID Systems

The SI3050-E-GT can support an analog caller-ID product that receives telephone-line signaling and passes voice information through a digital host interface. The system-side Voice DAA handles the programmable line interface, while the matching Si3011/18/19 companion performs the corresponding line-side functions. A PCM connection allows the caller-ID data and voice path to share the digital infrastructure of the product. Compliance with multiple PTT and immunity requirements is important because telephone products face line surges and out-of-band energy restrictions. The designer should use the family data sheet to configure signaling timing, country-specific behavior, and revision detection, and should preserve the recommended isolation-capacitor component placement.

🏭

Industrial Telephone Monitoring

The SI3050-E-GT is applicable to industrial telephone monitoring equipment that must detect and control an analog line while forwarding voice through a PCM-based system. Its software-programmable behavior helps standardize line supervision across installations operating in different regions. The 3.3 V host-side architecture integrates more naturally with modern embedded processors than a legacy 5 V interface design. The Si3050 family data sheet identifies coverage for FCC, TBR21, JATE, EN55022, EN55024, and high-voltage-surge requirements, providing useful guidance when qualifying a connected product. The implementation must include the appropriate line-side companion, protection components, grounding strategy, and isolation-capacitor layout. Firmware should identify the device revision through the documented REVA register field before applying configuration.

推薦產品摘要

Si3011 Line-side Voice DAA companion 用於: Voice-over-IP Terminals, Voice Gateway Equipment, Multifunction Printer Fax Modules, Digital PBX Peripheral Cards, Analog Caller-ID Systems, Industrial Telephone Monitoring Si3018 Line-side Voice DAA companion 用於: Voice-over-IP Terminals, Voice Gateway Equipment, Multifunction Printer Fax Modules, Digital PBX Peripheral Cards, Analog Caller-ID Systems, Industrial Telephone Monitoring Si3019 Line-side Voice DAA companion 用於: Voice-over-IP Terminals, Voice Gateway Equipment, Multifunction Printer Fax Modules, Digital PBX Peripheral Cards, Analog Caller-ID Systems, Industrial Telephone Monitoring
What is the SI3050-E-GT?
The SI3050-E-GT is a Silicon Labs 3.3 V programmable Voice Direct Access Arrangement (DAA) IC in a 20-pin TSSOP package. According to the Si3050 and Si3011/18/19 family data sheet, it provides the system-side interface for a programmable global Voice DAA solution and connects directly to a standard telephony PCM interface.
Which telephone functions does the SI3050-E-GT provide?
The SI3050-E-GT provides the system-side portion of a programmable Voice DAA interface and works with an Si3011, Si3018, or Si3019 line-side companion. The family data sheet describes support for global PTT programming, including country-specific line supervision, hook-state control, and requirements associated with FCC, TBR21, and JATE.
Where can I download the SI3050-E-GT datasheet PDF?
The official SI3050 and Si3011/18/19 family data sheet is available from Skyworks at the datasheet link on this page. It contains the shared Voice DAA architecture, programming model, compliance information, and application details needed to evaluate the SI3050-E-GT and select its Si3011, Si3018, or Si3019 companion.
What is the pinout of the SI3050-E-GT?
The SI3050-E-GT uses a 20-pin TSSOP package. Use the pin-description table in the Si3050 and Si3011/18/19 family data sheet to assign host-side supply, PCM interface, control, and companion-device connections before laying out the PCB.
Is the SI3050-E-GT suitable for a Voice-over-IP terminal?
Yes, the SI3050-E-GT is suitable for a Voice-over-IP terminal that requires a programmable analog FXO interface. Its 3.3 V digital-side operation, standard telephony PCM interface, and support for multiple international PTT requirements let a codec or DSP connect to the analog line circuit without implementing every line-state behavior discretely.
Can the SI3050-E-GT replace a traditional isolation transformer?
The Si3050 family uses Silicon Labs' patented isolation-capacitor technology and is designed to eliminate the need for isolation transformers, relays, or opto-isolators in the supported Voice DAA architecture. This simplification applies to the complete SI3050 plus Si3011/18/19 chipset and must be matched to the line-side companion and its recommended layout.
What is the difference between SI3050-E-GT and SI3050-E1-GT?
SI3050-E-GT and SI3050-E1-GT belong to the same programmable Voice DAA family and use the same 20-pin TSSOP format, but the E1 ordering code identifies a different device revision or configuration than the E revision. The family data sheet states that revision information is identified through the REVA[3:0] register field, so firmware and register configuration must match the exact installed device.
When should I choose SI3050-E-GT over a discrete FXO interface?
Choose the SI3050-E-GT when a design needs software-configured international PTT behavior, standardized hook-state handling, and a compact PCM-connected telephone interface. A discrete FXO implementation may be preferable for a uniquely fixed line requirement with no need for field programming, but it generally requires more board area and more analog supervision circuitry.
What is the best drop-in replacement for SI3050-E-GT?
SI3050-E1-GT is the closest documented drop-in candidate because it uses the same 20-pin TSSOP package and belongs to the same SI3050 programmable Voice DAA family. Confirm the device revision, required Si3011/18/19 line-side companion, supported PTT configuration, and PCB footprint before approving it as a replacement.
Can SI3050-E-FT replace SI3050-E-GT?
SI3050-E-FT is a same-family 20-pin TSSOP alternative, but it represents a different ordering code from SI3050-E-GT and should not be treated as an unconditional substitution. Verify the silicon revision, electrical characteristics, companion-device requirements, and software support against the family data sheet before using it in an existing design.
What is the best Silicon Labs equivalent for SI3050-E-GT?
The closest Silicon Labs equivalents are SI3050-E1-GT, SI3050-E1-FT, SI3050-E-FT, and the corresponding reel-ordering codes in the same 20-pin TSSOP Voice DAA family. Their exact suitability depends on revision, package order code, firmware support, and the selected Si3011/18/19 line-side device.
What company makes the SI3050-E-GT?
The SI3050-E-GT is associated with Silicon Labs in the ordering records and is now listed by Skyworks, which hosts the official family data sheet. The Si3050 and Si3011/18/19 data sheet identifies the programmable Voice DAA solution and its global regulatory feature set.
Where can I buy SI3050-E-GT and what is its price?
Use the Request a Quote form on this page to ask for SI3050-E-GT availability, pricing, and lead time. Because this legacy Voice DAA has fragmented distribution, quote confirmation should include the exact 20-pin TSSOP ordering suffix, tube or reel packaging, and the companion line-side part required by the design.
Is SI3050-E-GT in stock and what is the lead time?
Current SI3050-E-GT stock and manufacturing lead time should be confirmed through the Request a Quote form on this page. The part is an established but legacy Voice DAA, so availability may depend on remaining inventory, exact packaging suffix, and whether an Si3011, Si3018, or Si3019 companion is being sourced alongside it.
How do I configure the SI3050-E-GT for international PTT requirements?
The SI3050-E-GT is configured through its software-programmable Voice DAA architecture, with country-specific behavior implemented according to the family data sheet and Silicon Labs control software. Review the PTT tables, line-parameter tables, and revision-detection procedure before loading a configuration for FCC, TBR21, JATE, or another target market.
What are the key specifications of SI3050-E-GT that engineers should know?
The SI3050-E-GT is a 3.3 V, 20-pin TSSOP, software-programmable Voice DAA for the system side of a global FXO interface. The family supports a standard telephony PCM connection, requires an Si3011/18/19 line-side companion, uses isolation-capacitor technology, and addresses FCC, TBR21, JATE, FCC Parts 15 and 68, EN55022, and EN55024 requirements.

工程參考資料,適用於 SI3050-E-GT — 比較、設計指引及合規資訊。

選型指南

Choose SI3050-E-GT when the design specifically calls for the revision E 3.3 V SI3050 Voice DAA and can use the Si3011, Si3018, or Si3019 line-side companion required by the telephone architecture. Its software-programmable PTT behavior, standard telephony PCM interface, and 20-pin TSSOP package make it suitable for voice gateways, VoIP terminals, fax modules, PBX line cards, and caller-ID products.

Choose SI3050-E1-GT when that revision is the approved configuration and when the available firmware explicitly recognizes the E1 revision. Consider SI3050-E-FT or SI3050-E1-FT only after checking the associated revision, electrical characteristics, and software support. The FTR codes are relevant when reel packaging is required, but the ordering suffix should not be treated as a functional upgrade. Before releasing a design, verify lifecycle availability, the exact line-side companion, regional PTT configuration, protection network, and recommended isolation-capacitor layout.

與替代品比較

參數 本產品 SI3050-E1-GT SI3050-E-FT SI3050-E1-FT SI3050-E1-FTR SI3050-E-FTR
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 20-pin TSSOP 20-pin TSSOP - same 20-pin TSSOP - same 20-pin TSSOP - same 20-pin TSSOP - same 20-pin TSSOP - same
Product Type Programmable Voice Direct Access Arrangement Programmable Voice Direct Access Arrangement Programmable Voice Direct Access Arrangement Programmable Voice Direct Access Arrangement Programmable Voice Direct Access Arrangement Programmable Voice Direct Access Arrangement
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Digital Interface Standard telephony PCM interface Standard telephony PCM interface Standard telephony PCM interface Standard telephony PCM interface Standard telephony PCM interface Standard telephony PCM interface
Line-Side Companion Si3011, Si3018, or Si3019 Si3011, Si3018, or Si3019 Si3011, Si3018, or Si3019 Si3011, Si3018, or Si3019 Si3011, Si3018, or Si3019 Si3011, Si3018, or Si3019
Ordering Code Revision Revision E Revision E1 Revision F Revision E1/F ordering code Revision E1/F ordering code Revision F
Programming Method Software programmable Software programmable Software programmable Software programmable Software programmable Software programmable
Isolation Architecture Patented isolation capacitor technology Patented isolation capacitor technology Patended isolation capacitor technology Patented isolation capacitor technology Patended isolation capacitor technology Patended isolation capacitor technology

主要差異化特點

  • Directly specified as revision E in the ordering code (對比SI3050-E1-GT)
  • Legacy-friendly 20-pin TSSOP footprint (對比SI3050-E-FT)
  • Global programmable Voice DAA architecture (對比SI3050-E1-FTR)

設計說明

Implement the Si3050 and Si3011/18/19 line-side circuit using the isolation-capacitor placement and grounding arrangement shown in the family data sheet. Keep the telephone-line side physically separated from host-side PCM and power routing, use the prescribed protection network, and avoid long unprotected copper paths. This isolation strategy is central to the family's ability to replace transformers, relays, and opto-isolators while meeting global line-interface requirements.

Route PCM clock and data traces as controlled-impedance digital signals, with the SI3050 placed to minimize trace length to the host codec or DSP. Decouple the 3.3 V supply locally and maintain continuous ground references between the digital section and the Voice DAA support components. Pay particular attention to clock jitter and grounding return paths because the telephone side and host side share a compact 20-pin TSSOP implementation.

Do not treat a different SI3050 suffix as automatically interchangeable. Confirm the device revision through the documented REVA[3:0] register field, select the matching Si3011, Si3018, or Si3019 line-side companion, and load a configuration approved for the target country. Revision E, E1, and F ordering codes can share the 20-pin TSSOP footprint while differing in device identity and configuration requirements.

Validate the complete telephone-interface design rather than only the SI3050-E-GT itself. Check hook-state thresholds, ring detection, line current, off-hook timing, PTT behavior, surge immunity, emissions, and isolation capacitance using the family data sheet tables and reference circuits. A host-side PCM test can pass even when line-side timing or regional protection requirements remain incorrect.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Unknown

The exact SI3050-E-GT ordering record is identified as lead-free. The family data sheet documents FCC, TBR21, JATE, FCC Parts 15 and 68, EN55022, EN55024, surge, emissions, immunity, and safety requirements. No RoHS, REACH, halogen-free, or conflict-minerals statement is confirmed for the exact ordering code.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

si3050 e1 ftr si3050 e1 gtr si3050 e1 fmr si3050 braun skyworks si3050 SI3050-E-GT datasheet SI3050-E-GT datasheet pdf SI3050-E-GT pinout SI3050-E-GT equivalent SI3050-E-GT replacement SI3050-E-GT vs SI3050-E1-GT SI3050-E-GT 20 TSSOP SI3050-E-GT application circuit SI3050-E-GT price

相關元件與詞彙

Silicon Labs Skyworks SI3050-E-GT SI3050-E1-GT SI3050-E-FT SI3050-E1-FT SI3050-E1-FTR SI3050-E-FTR Si3011 Si3018 Si3019 Voice DAA Direct Access Arrangement Foreign Exchange Office FXO telecom interface IC semiconductor PCM interface software programmable isolation capacitor technology TSSOP-20 TSSOP family surface mount SMD PTT FCC TBR21 JATE RoHS REACH
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情