Texas Instruments

SN75138D - Quad Bus Transceiver | Texas Instruments

MPN: SN75138D ✗ 停產
4.75 V to 5.25 V Vdss 100 mA Id 16-pin SOIC (D) Package High-speed operation Speed
MOQ: 1 |

SN75138D 概覽

Texas Instruments SN75138D is a quadruple differential bus transceiver with four independent bidirectional channels, a 4.75 V to 5.25 V supply range, and a 16-pin SOIC (D) package. Each channel combines a TTL-compatible driver, a high-input-impedance receiver, and a common driver-strobe control. The open-collector driver outputs are designed to sink loads up to 100 mA and include clamp diodes for transient protection.

A bus transceiver is an interface IC that connects digital logic to a bidirectional data bus. The SN75138D belongs to the RS-485-style interface hierarchy: its drivers place data onto a single-ended transmission line, while its receivers recover logic-level signals from the same conductors. This arrangement allows one device to support two-way communication while keeping the bus driver inactive when the transceiver is receiving.

The four channels provide independent TTL-compatible driver inputs, receiver outputs, and bus-side driver/receiver connections. A common driver strobe gives the host logic control over whether the open-collector outputs are enabled. High-input-impedance receivers reduce loading on the bus, while the specified 4.75 V to 5.25 V operating range supports conventional 5 V digital systems. The driver outputs support loads up to 100 mA, making the interface suitable for systems requiring wired bus drive rather than only low-power logic interconnection.

Operationally, the SN75138D separates the logic-side signal path from the bus-side signal path. Driver inputs accept TTL levels and control the corresponding open-collector outputs. Receiver inputs monitor the bus and present TTL-compatible signals at the receiver outputs. Clamp diodes help limit excessive voltage excursions on driver outputs, while the high-impedance receiver structure supports shared-bus communication. The common driver strobe provides a single point for coordinating driver state across the four channels.

Typical applications include industrial control buses, instrumentation links, computer peripheral interfaces, multipoint data communication, and embedded systems that require several bidirectional bus connections. The device can also be used where several TTL systems must exchange data over a shared wired network without continuously driving the bus.

For reliable implementation, place the device close to the line-driver and receiver circuitry, route the bus away from sensitive clock and analog signals, and provide the supply bypassing recommended in the manufacturer documentation. Confirm termination, fail-safe biasing, and cable length against the required bus topology. The strobe signal must be sequenced so that only one node drives the shared bus at a time.

This product page summarizes the SN75138D architecture, verified operating characteristics, package details, lifecycle status, replacement considerations, and practical integration guidance. It also distinguishes verified device functions from parameters that require confirmation against the manufacturer datasheet before a new design is released.

直接替換替代品,適用於 SN75138D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

SN65C1167ENSR

✅ 直接替換
📦 SOIC-16
Preserves the 4-channel half-duplex use case and 16-pin SOIC format; the SN75138D supply range is 4.75-5.25 V, while the alternative’s electrical differences are not quantified in the cross-reference listing.

📋 參考替代品(不在目錄中)

SN75138D 規格

Product Type Quadruple bus transceiver
Number of Channels 4 channels
Channel Configuration 4 driver and 4 receiver channels
Duplex Support Half-duplex
Supply Voltage Range 4.75 V to 5.25 V
Driver Output Type Open-collector
Maximum Open-Collector Output Current 100 mA
Receiver Input Impedance High input impedance
Receiver Threshold High threshold
Logic Compatibility TTL-compatible
Driver Control Common driver strobe
Transient Protection Clamp diodes on driver outputs
Operating Speed High-speed operation
封裝 16-pin SOIC (D)
安裝類型 Surface mount
Packaging Type Tube

SN75138D 16-pin soic (d) 腳位配置指南

SN75138D(16-pin soic (d) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

SN75138D 的 16-pin soic (d) 封裝腳位圖

無詳細腳位定義資料: SN75138D.

請參閱 資料表 以查看完整腳位配置。

典型應用

SN75138D 適用於 6 應用s: Industrial Control Bus Interfaces, Multipoint Data Communication, Embedded Instrumentation Links, Computer Peripheral Interfaces, Data Acquisition Systems, Legacy Test Equipment.

🏭

Industrial Control Bus Interfaces

The SN75138D fits legacy industrial control nodes that need four half-duplex bus channels on a 5 V logic rail. Each channel combines a TTL-compatible driver with a high-input-impedance receiver, allowing a controller to exchange commands and status over shared single-ended conductors. Its open-collector outputs support loads up to 100 mA, while the common driver strobe helps the host keep all drivers off except during transmission. The principal trade-off is the obsolete lifecycle, so new deployments should assess current sourcing and validate thermal, timing, and bus-length requirements before production release.

🌐

Multipoint Data Communication

The SN75138D can connect several TTL-based nodes to a shared single-ended bus where only one transmitter should be active at a time. High-input-impedance receiver inputs reduce bus loading, and the open-collector driver outputs support wired logic when paired with correct pull-up and termination networks. The common driver strobe provides centralized control over all four driver outputs, which simplifies arbitration logic in embedded controllers. Designers should calculate the pull-up value from driver sink current, cable length, node count, and rise-time limits, and should verify that the 4.75 V to 5.25 V supply range matches the surrounding system.

🖥️

Embedded Instrumentation Links

For embedded measurement and control equipment, the SN75138D provides four independent driver and receiver channels for linking TTL logic to wired field buses. The high-threshold receiver supports noise-tolerant decoding of the bus state, while the high-input-impedance input structure helps preserve integrity on shared lines. Clamp diodes on the open-collector outputs add transient handling around the driver pins. Because this part is obsolete, instrument designers should preserve it for repairs to proven platforms and prefer a currently supported transceiver for new field-instrument designs unless lifecycle risk is formally accepted.

🔧

Computer Peripheral Interfaces

The SN75138D can bridge legacy TTL peripherals and controllers through four half-duplex bus channels. The driver inputs and receiver outputs allow the host logic to use familiar digital levels, while the open-collector bus side supports shared conductors and wired pull-up behavior. A common strobe lets firmware disable the drivers during reception, reducing the risk of output contention. For peripheral modernization, check whether the target cable, termination, and signal rates remain compatible with the original transceiver, because the SN75138D’s obsolete status can outweigh the convenience of reusing an existing board.

📊

Data Acquisition Systems

The SN75138D is suitable for legacy data-acquisition chassis in which several sensor or controller nodes communicate with a central TTL interface. Four channels reduce the number of separate bus transceivers required, and the receiver’s high input impedance avoids unnecessarily loading the measured network. The 4.75 V to 5.25 V supply range aligns with conventional 5 V acquisition hardware, while the common driver strobe supports orderly command-and-response traffic. Designers should isolate sensitive analog inputs from the bus routing and verify that the line-driver outputs do not introduce unacceptable loading in the selected termination topology.

🧰

Legacy Test Equipment

The SN75138D can support repair and extension of older test systems that use four TTL-controlled, half-duplex bus links between an instrument controller and peripheral fixtures. The open-collector outputs handle loads up to 100 mA, and the high-impedance receivers reduce loading on connected lines. The common driver strobe is useful for fixture designs that require coordinated transmit and receive states. Before incorporating the device into maintained equipment, verify the original bus termination, cable length, logic thresholds, and timing margin, and obtain remaining stock through a formal quotation because production availability is limited.

推薦產品摘要

SN75138D Texas Instruments 用於: Industrial Control Bus Interfaces, Multipoint Data Communication, Embedded Instrumentation Links, Computer Peripheral Interfaces, Data Acquisition Systems, Legacy Test Equipment SN65C1167ENSR Potential substitute for legacy bus-interface nodes 用於: Industrial Control Bus Interfaces, Multipoint Data Communication, Embedded Instrumentation Links, Computer Peripheral Interfaces, Data Acquisition Systems, Legacy Test Equipment
Where can I buy the SN75138D?
The SN75138D can be requested through XAIPART’s Request a Quote form on this page. The Texas Instruments product page identifies the SN75138D as a 16-pin SOIC quadruple bus transceiver, while distributor listings identify the same package and orderable suffix. Because the device is listed as obsolete, request current availability, minimum order quantity, packaging, and any remaining-life conditions when placing an order.
What is the price of the SN75138D?
Use the Request a Quote form on this page for the current SN75138D quotation and quantity availability. No qualifying quantity-break price was published for this exact obsolete 16-pin SOIC ordering suffix, so no unit price is presented here. A quotation can also confirm whether remaining inventory is packaged in tubes and whether any traceability or certification documentation can be supplied.
What is the lead time for the SN75138D?
Request the current lead time through XAIPART’s Request a Quote form on this page. The SN75138D is listed as obsolete, so lead time depends on remaining manufacturer or authorized-channel inventory rather than normal production scheduling. Include your required quantity, acceptable tube packaging, target date, and any traceable-lot requirements with the quotation request.
Is the SN75138D still in stock?
Stock must be confirmed through XAIPART’s Request a Quote form because the SN75138D is listed as obsolete and no fixed stock quantity is published on this page. The part remains identifiable as a Texas Instruments 4-channel, 16-pin SOIC bus transceiver. Request a quantity check before committing a production schedule, especially when multiple production batches must be synchronized.
What are the key specifications of the SN75138D that engineers should know?
The SN75138D is a four-channel, half-duplex bus transceiver designed for a single 5 V supply. According to the Texas Instruments product page, it operates from 4.75 V to 5.25 V, combines TTL-compatible drivers with high-input-impedance high-threshold receivers, uses a common driver strobe, and provides open-collector outputs capable of handling loads up to 100 mA. It is packaged in a 16-pin SOIC (D).
What is the SN75138D used for?
The SN75138D is used for two-way data communication over single-ended transmission lines. Its four identical channels each include a TTL-input driver and TTL-output receiver, allowing a host to transmit and receive on shared bus conductors. According to Texas Instruments, the open-collector outputs are designed for loads up to 100 mA and include clamp diodes, making the device appropriate for multipoint control and instrumentation networks.
How does the common driver strobe work in the SN75138D?
The common driver strobe controls the enabled state of the open-collector driver outputs across the four channels. When multiple nodes share a bus, the strobe should be managed so that only one node actively drives the line at a time. This prevents multiple outputs from simultaneously sourcing current into the same conductor and supports deterministic bus arbitration in embedded control systems.
What is the difference between the SN75138D and SN65C1167ENSR?
The SN75138D and SN65C1167ENSR are identified by cross-reference listings as substitutes for half-duplex transceiver designs, but their electrical details are not interchangeable without comparison. The SN75138D is specified for 4.75 V to 5.25 V operation, four channels, TTL-compatible logic, and open-collector outputs up to 100 mA. Confirm the alternative’s supply range, pin functions, timing, enable polarity, and output-load ratings before approving a replacement.
When should I choose the SN75138D over a modern transceiver?
Choose the SN75138D when maintaining an existing 5 V design that depends on its four TTL-compatible channels, common driver strobe, high-impedance receivers, and open-collector bus outputs. For a new design, a modern transceiver may be preferable when lower supply voltage, faster performance, enhanced fail-safe behavior, wider temperature options, or an active lifecycle is required. The obsolete status is the principal sourcing constraint.
Is the SN75138D suitable for industrial control systems?
The SN75138D can suit legacy industrial control and instrumentation interfaces that operate from a 5 V supply and require four half-duplex bus channels. Its high-input-impedance receivers and open-collector drivers support shared-bus communication, while the common strobe helps prevent output contention. For new installations, verify operating-temperature limits, cable length, termination, isolation, and functional-safety requirements before committing the obsolete device to service life.
What is the best drop-in replacement for the SN75138D?
The SN65C1167ENSR is the only candidate explicitly identified as a compatible substitute in the available cross-reference material. It should be considered a potential drop-in replacement only after its 16-pin SOIC footprint and every electrical function are checked against the original design. Pay particular attention to supply range, driver-enable polarity, receiver thresholds, propagation delay, bus output ratings, and package pin mapping.
Can SN65C1167ENSR replace the SN75138D without a PCB change?
The SN65C1167ENSR may support a drop-in migration because it is listed as a compatible substitute and is offered in a 16-pin SOIC configuration. A footprint match alone does not establish functional equivalence. Confirm pin-to-pin behavior, supply voltage, enable polarity, receiver thresholds, timing, output drive, and bus termination in the manufacturer documentation before deciding whether the existing PCB can remain unchanged.
Where can I download the SN75138D datasheet and find its pinout?
Open the Texas Instruments SN75138 product page linked from this page to access the manufacturer’s documentation and ordering information. The SN75138D ordering option is identified as a 16-pin SOIC (D). Use the manufacturer pin-description table when assigning PCB nets, especially for the common driver strobe, because the exact numbered signal mapping should be confirmed directly from the datasheet.
How should the SN75138D be used on a multidrop bus?
Use the SN75138D as a node on a multidrop bus by holding its common driver strobe disabled while the receiver remains active, then enabling the driver only when that node is selected to transmit. The open-collector architecture allows wired logic behavior when termination and pull-up arrangements are correct. Ensure that exactly one enabled driver can source the bus at a time and calculate the termination network for the installed cable and node count.
Is the SN75138D RoHS and REACH compliant?
The manufacturer product page does not establish the requested RoHS and REACH declarations in the available technical summary, so neither status should be inferred from the device family name. Request current material-compliance documentation from XAIPART’s quotation team, including the exact SN75138D ordering suffix and intended shipment region. The same request can identify halogen-free, lead-free, and conflict-minerals documentation if your quality system requires it.

工程參考資料,適用於 SN75138D — 比較、設計指引及合規資訊。

選型指南

Choose the SN75138D when maintaining a legacy 5 V system that specifically depends on four half-duplex channels, TTL-compatible logic, open-collector outputs rated to 100 mA, and a common driver strobe in a 16-pin SOIC package. Its obsolete status makes it most appropriate for repair, continuation, or controlled redesign of proven equipment rather than unrestricted new development. Consider SN65C1167ENSR when qualifying a same-package substitute, but do not treat the cross-reference alone as proof of equivalence: compare pin functions, supply range, enable polarity, thresholds, propagation delay, output drive, and termination behavior. For a genuinely new design with requirements beyond 5 V operation or multiple half-duplex channels, evaluate a currently supported transceiver family instead of constraining the architecture around an obsolete four-channel device.

與替代品比較

參數 本產品 SN65C1167ENSR
Package SOIC-16 (D) SOIC-16
Brand Texas Instruments Texas Instruments

主要差異化特點

  • Four independently usable transceiver channels in one 16-pin package (對比SN65C1167ENSR)
  • Defined 5 V operating range and 100 mA open-collector capability (對比SN65C1167ENSR)
  • Common driver strobe supports coordinated bus arbitration (對比SN65C1167ENSR)

設計說明

Do not allow more than one node to enable its bus driver at the same time. The SN75138D uses open-collector outputs, so conflicting enabled drivers can create excessive sink or source current and an undefined bus level. Use the common driver strobe in a controlled sequence, hold drivers disabled while receiving, and define arbitration behavior for startup, reset, and fault recovery.

Calculate pull-up and termination values from the actual bus topology rather than copying a generic resistor value. Consider driver sink-current capability, the 100 mA stated output rating, receiver input impedance, cable length, node capacitance, and the required signal rise time. Place termination only where required by the bus architecture and keep stub branches short to limit reflected signals.

Place the transceiver close to the bus connector and separate bus traces from clocks, sensitive analog inputs, and switching-regulator nodes. Provide local supply decoupling and return the driver and receiver paths as a controlled, continuous interface between the connector and device. Use a ground-plane layout that avoids splitting return paths beneath the device, and follow the manufacturer pin-description table for the final net assignments.

The SN75138D is specified for a 4.75 V to 5.25 V supply range, so verify that supply tolerance, startup sequencing, and local rail noise remain inside the device requirements. Confirm supply current and power dissipation against the actual enabled-driver state and bus load. An estimated thermal calculation must use the final worst-case supply, output voltage, and load conditions before a production design is approved.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product summary does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for the exact SN75138D ordering suffix. Request current material-compliance documentation with a quotation.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

SN75138D datasheet SN75138D pinout SN75138D datasheet pdf SN75138D equivalent SN75138D replacement SN75138D vs SN65C1167ENSR SN75138D 16-SOIC pinout Texas Instruments SN75138D SN75138D price SN75138D stock SN75138D open collector transceiver SN75138D industrial control bus

相關元件與詞彙

Texas Instruments SN75138D SN75138 SN65C1167ENSR quadruple bus transceiver interface IC RS-485 transceiver single-ended transmission line open-collector driver high-input-impedance receiver TTL-compatible logic common driver strobe clamp diodes half-duplex communication multipoint bus SOIC-16 surface-mount package 4.75 V to 5.25 V supply 100 mA driver load wired-AND bus behavior
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情