STM32F051K8U6 - 48MHz 64KB MCU | STMicroelectronics
MPN: STM32F051K8U6 ✓ 啟用中STM32F051K8U6 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F0 family belongs to the 32-bit MCU category and uses the Arm Cortex-M0 instruction set for efficient embedded control. Within the STM32 portfolio, the F051 series is positioned for cost-sensitive applications that require more processing performance and peripheral capability than the smallest entry-level MCUs.
Key features include a 48 MHz Cortex-M0 core, 64 KB of Flash, 8 KB of RAM, 27 I/O pins, 12-bit ADC and DAC resources, and 11 timers. These characteristics make the STM32F051K8U6 suitable for compact control systems that need mixed analog and digital functions without the memory or pin count of a larger microcontroller. Internal oscillator support also helps simplify board design when maximum clock accuracy is not required.
The Arm Cortex-M0 architecture supports efficient event-driven firmware while the microcontroller’s communication peripherals support common embedded-system connections. Its 32-pin surface-mount UFQFPN package minimizes PCB area, while the exposed thermal pad supports improved heat transfer. Designers should nevertheless verify the package land pattern, pin assignments, and exposed-pad connection requirements against the manufacturer datasheet before layout release.
Typical uses include compact sensor controllers, industrial monitoring modules, building controls, appliance interfaces, and low-cost communication equipment. The 64 KB Flash capacity is useful for moderate protocol stacks and application firmware, while the ADC and DAC simplify designs that require an analog measurement channel or an analog output without a separate converter.
For a new PCB, place the decoupling capacitors close to the supply and ground pins, connect the exposed pad according to the datasheet land pattern, and reserve a debug interface for programming and field diagnosis. Firmware reuse between STM32F0 variants should be validated because memory size, peripherals, errata, and clock-tree details can differ even when the package is unchanged.
This page combines electrical characteristics, drop-in replacement guidance, package-aware comparisons, and practical PCB design notes. It is intended to help engineers identify whether the STM32F051K8U6 fits a specific embedded-control requirement before committing the footprint to a production design.
直接替換替代品,適用於 STM32F051K8U6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F051K8U6 (相同外形與佔位) — 差異在於 Flash Memory, Package.
STM32F051K6U6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F051K4U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32F051K2U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32C051K8
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L051K6U6
✅ 直接替換聯絡詢價
查看資料表 →STM32F051K8U6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| RAM | 8 KB (8K x 8) |
| Number of I/O Pins | 27 pins |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Processor Core | Arm Cortex-M0, 32-bit RISC |
| Program Memory Type | Embedded Flash |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Timer Count | 11 timers |
| Oscillator Type | Internal oscillator |
| 封裝 | 32-pin UFQFPN (5 mm x 5 mm) |
| 安裝類型 | Surface mount |
STM32F051K8U6 32-pin ufqfpn (5 mm x 5 mm) 腳位配置指南
STM32F051K8U6(32-pin ufqfpn (5 mm x 5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F051K8U6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F051K8U6 適用於 6 應用s: Industrial Sensor Controller, Smart Building Sensor Node, Appliance Control Module, Battery-Powered Monitoring Device, Automotive Accessory Interface, Data Acquisition Front End.
Industrial Sensor Controller
The STM32F051K8U6 fits compact sensor-controller designs that combine analog measurement with local processing. Its 12-bit ADC supports sensor signals, while the 48 MHz Arm Cortex-M0 core provides enough throughput for filtering, calibration, status reporting, and moderate protocol handling. The 64 KB Flash and 8 KB RAM accommodate a bootloader, application firmware, and working data without requiring an external memory device. A 32-pin UFQFPN package also preserves PCB area. For industrial deployment, verify the exact temperature grade, isolation requirements, EMC performance, and long-term supply status before production release.
推薦
Smart Building Sensor Node
STM32F051K8U6 can serve as the local controller in a compact building-monitoring node using its 27 I/O pins and 48 MHz processing capability. The MCU can sample environmental inputs, manage switch or sensor status, and run a lightweight communications stack within the 8 KB RAM and 64 KB Flash budget. Operating from 2.0 V to 3.6 V supports integration with low-energy 3.3 V building electronics. The small 5 mm by 5 mm UFQFPN package is useful for space-constrained nodes, but low-power operation should be evaluated carefully because the F051 family is not optimized primarily for ultra-low-power sensing.
推薦
Appliance Control Module
The STM32F051K8U6 is appropriate for compact appliance controls that coordinate digital inputs, outputs, timers, and simple analog measurements. Its 11 timers support periodic switching, motor timing, or PWM-related tasks, while the 12-bit ADC can monitor voltage, temperature, or resistive sensor inputs. The 64 KB Flash provides room for control algorithms and fault handling, and the 2.0 V to 3.6 V range simplifies integration with common embedded power rails. Designers should verify the exact peripheral assignments and pin multiplexing in the datasheet, especially where appliance functions require fast shutdown or redundant protection.
推薦
Battery-Powered Monitoring Device
STM32F051K8U6 can support battery-powered environmental and equipment monitoring where a compact 32-pin package, 64 KB Flash, and 8 KB RAM are sufficient. The MCU can acquire sensor data, apply digital filtering, maintain a low-duty-cycle operating schedule, and report information through a serial communication link. Its internal oscillator simplifies the clock circuit, while the 2.0 V minimum operating voltage can help optimize the usable range of a 3 V battery system. For sustained battery operation, evaluate sleep-mode consumption, wake sources, analog settling time, and regulator efficiency because processing speed alone does not determine battery life.
推薦
Automotive Accessory Interface
The STM32F051K8U6 can be evaluated for non-safety-critical automotive accessory interfaces that need a compact controller, local I/O, and serial communications. Its 48 MHz Cortex-M0 core is suitable for protocol handling and supervisory logic, while the 64 KB Flash can hold application code for switches, sensors, or body modules. The 32-pin UFQFPN package supports dense board layouts, and the ADC permits basic analog monitoring. Automotive production use requires explicit confirmation of temperature grade, qualification status, transient performance, EMC behavior, and functional-safety requirements; the standard part should not be assumed to satisfy AEC-Q100 without supporting documentation.
推薦
Data Acquisition Front End
STM32F051K8U6 can form the control section of a compact data-acquisition front end when its 12-bit ADC, 48 MHz CPU, and memory capacity satisfy the sampling and processing requirements. The device can control an external multiplexer, configure analog front-end circuitry, perform offset and gain correction, and transfer results over UART, SPI, or another supported interface. The 64 KB Flash is useful for calibration tables and compact signal-processing routines, while the 8 KB RAM can support buffered measurements. Validate input bandwidth, acquisition time, ADC noise, reference stability, and interrupt latency for the selected analog network.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F051K8U6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F051K6U6 | STM32F051K4U6 | STM32F051K2U6 | STM32C051K8 | STM32L051K6U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-pin UFQFPN (5 mm x 5 mm) | 32-pin UFQFPN (5 mm x 5 mm) | 32-pin UFQFPN (5 mm x 5 mm) | 32-pin UFQFPN (5 mm x 5 mm) | 32-pin UFQFPN (5 mm x 5 mm) | 32-pin UFQFPN (5 mm x 5 mm) |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 32 KB | 16 KB | 8 KB | 64 KB | 32 KB |
| RAM | 8 KB | 8 KB | 4 KB | 3 KB | 8 KB | 8 KB |
| Operating Voltage Range | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 1.65 V to 3.6 V |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Processor Architecture | Arm Cortex-M0 | 32-bit RISC, same F051 family | 32-bit RISC, same F051 family | 32-bit RISC, same F051 family | Cortex-M0+, family change | Cortex-M0+, low-power family |
主要差異化特點
- Largest Flash option in the listed STM32F051K package family (對比STM32F051K6U6)
- Uses the established Cortex-M0 architecture without changing the package (對比STM32C051K8)
- Broader supply-voltage range than the STM32L0 alternative (對比STM32L051K6U6)
設計說明
Use the STM32F051K8 manufacturer land pattern for the 32-pin UFQFPN rather than adapting a generic QFN footprint. Place the supply bypass capacitors adjacent to their associated power and ground pins, keep the exposed-pad connection consistent with the datasheet, and route sensitive analog inputs away from switching nodes. The compact 5 mm by 5 mm package demands short escape paths, so verify solder mask, paste, and assembly clearance during PCB review.
Design the supply for a voltage between 2.0 V and 3.6 V, including tolerance, startup ramp, ripple, and transient margin. Confirm the final regulator can support the MCU, analog circuitry, and external loads without violating current or thermal limits. If the design uses the internal oscillator, allow the firmware and clock tree to settle according to the oscillator and system-clock procedure described by the manufacturer.
Do not assume that an MCU with the same package is a firmware-compatible replacement. STM32F051K6U6 and STM32F051K4U6 reduce available Flash, while STM32C051K8 and STM32L051K6U6 belong to different Cortex-M0+ families. Recheck startup code, linker limits, interrupt vectors, peripheral instances, pin multiplexing, clock configuration, low-power behavior, and device errata before substituting any listed alternative.
Keep analog inputs, voltage-reference connections, and the ADC input network away from high-current switching paths. Use a quiet reference arrangement with short, symmetric routing where practical, and follow the datasheet grounding recommendations. For communication interfaces, provide the correct pull resistors, impedance control, and connector return-path design. Firmware should also verify that ADC sampling occurs after the required source-settling interval.
合規資訊
Compliance declarations were not stated in the accessible component information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the manufacturer product documentation or declarations before production release.