Microchip Technology

SY88927VZG - 2.5Gbps Differential Receiver | Microchip Technology

N.º de pieza: SY88927VZG ✓ Activo
3.3 V to 5 V Vdss 8-pin SOIC Package
MOQ: 1 |

SY88927VZG Descripción general

The Microchip Technology SY88927VZG is a 2.5 Gbps high-speed differential receiver designed for 3.3 V or 5 V operation in an 8-pin SOIC package. It accepts a differential high-speed input and produces a PECL-compatible output suitable for clock recovery, signal conditioning, telecommunications, and data-processing interfaces. Its 2.5 Gbps data rate supports demanding serial links operating well below the receiver’s stated performance ceiling.

A high-speed differential receiver is an interface IC that converts a small differential signal into a single-ended, logic-compatible output. Differential signaling reduces sensitivity to common-mode noise because the receiver evaluates the voltage difference between two conductors. The receiver category belongs to the broader hierarchy of differential receivers, line receivers, interface ICs, and semiconductors, serving as the input stage between high-frequency signal sources and downstream digital or analog circuitry.

The principal features include a 2.5 Gbps maximum data rate, support for both 3.3 V and 5 V supplies, differential input operation, and an 8-SOIC package. The SY88927V is described as functionally equivalent to the EL16V family while providing higher performance capability and faster output transition times. Those characteristics make it suitable for high-frequency sources requiring short transition times and deterministic signal propagation.

The receiver architecture converts the differential input into a single-ended output that can be referenced to an appropriate bias network. The output arrangement supports single-ended use or use as a DC bias for AC-coupled downstream circuits. Because high-speed PECL signaling uses common-mode voltage conventions, correct supply voltage, termination, biasing, and signal-plane geometry are essential to maintain output levels and minimize reflections.

Typical applications include 2.5 Gbps backplane links, telecommunications clock distribution, parallel-to-serial conversion systems, high-speed data acquisition, and clock recovery circuits. It can also serve in test equipment and optical-communication interfaces where a differential signal must be converted into a high-speed logic output before further processing.

Designers should place the receiver close to the signal source and use controlled-impedance routing with short differential traces. Power and ground connections must be decoupled locally, while unused inputs and outputs require the handling specified by the manufacturer datasheet. System timing and AC-coupling components should be evaluated together so that the complete receiver chain remains compatible with the 2.5 Gbps operating requirement.

Alternativas directas para SY88927VZG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

SY88927VZG Especificaciones

Product Type High-speed differential receiver
Maximum Data Rate 2.5 Gbps
Supply Voltage Range 3.3 V to 5 V
Supported Supply Modes 3.3 V or 5 V
Input Type Differential input
Tipo de salida Single-ended output
Logic Family PECL-compatible
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount
Receiver Configuration 1 receiver
Reference Device EL16V family

Guía de configuración de pines de SY88927VZG 8-pin soic

Configuración de pines para SY88927VZG (encapsulado 8-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 8-pin soic para SY88927VZG

No hay datos detallados de patillaje disponibles para SY88927VZG.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SY88927VZG es adecuado para 6 aplicacións: High-Speed Backplane Interfaces, Telecommunications Clock Recovery, Clock and Data Distribution, High-Speed Data Acquisition, Parallel-to-Serial Systems, Test and Measurement Equipment.

🌐

High-Speed Backplane Interfaces

The SY88927VZG is suitable for a 2.5 Gbps differential backplane receiver stage because it converts a small differential signal into a single-ended output while operating from 3.3 V or 5 V. Place it near the connector or transceiver output to limit trace loss, and use controlled-impedance routing for the differential pair. The receiver’s stated 2.5 Gbps capability gives the link useful performance margin when source and sink edges are rapid. The main engineering consideration is maintaining a continuous reference plane and providing the correct PECL-compatible bias network so that the output remains usable at the receiver’s rated signaling rate.

📡

Telecommunications Clock Recovery

The SY88927VZG can form the receive stage of a telecommunications clock-recovery circuit operating up to 2.5 Gbps. Differential input reception is useful in high-speed backplanes and telecommunications equipment because common-mode disturbance affects the two signal conductors similarly, while the receiver responds to their voltage difference. The SY88927V family’s faster output transition capability relative to the EL16V family supports interfaces driven by high-frequency sources. Validate the recovered clock’s jitter and amplitude with the complete equalizer, termination, and AC-coupling network rather than treating the receiver alone as a complete timing system.

🖥️

Clock and Data Distribution

The SY88927VZG can receive a high-speed differential clock and convert it to a single-ended logic output for downstream distribution. Its 2.5 Gbps rating allows it to handle communication and processing clocks whose edge rates are substantially faster than their repetition frequency. The 3.3 V or 5 V supply flexibility helps align the receiver with different logic environments, although output reference and level requirements must be checked carefully. Keep the input pair short, place local supply bypassing at the device, and confirm that the downstream load and transmission line do not distort the transition rate.

📊

High-Speed Data Acquisition

The SY88927VZG can serve as the input receiver in acquisition equipment that accepts differential signals at rates up to 2.5 Gbps. Differential reception provides a useful balance of noise immunity and integration density in compact instrument designs, while the single-ended output can feed a converter or timing block. The critical performance considerations are input return loss, common-mode range, output transition time, and downstream loading. Use the manufacturer’s recommended circuit as the starting point, preserve symmetry between the differential traces, and evaluate the complete signal chain across temperature for timing-margin behavior.

⚡

Parallel-to-Serial Systems

The SY88927VZG fits the receiving side of a parallel-to-serial or serial-deserializer subsystem that uses a 2.5 Gbps differential link. The receiver’s differential input and single-ended output create a practical interface boundary between high-speed serial circuitry and downstream digital logic. Because a 2.5 Gbps edge rate has a short unit interval, component placement and trace geometry can materially affect performance. Position the receiver close to the serial source, provide uninterrupted reference planes, and verify that the selected output network preserves the intended logic levels. Use eye and timing measurements at the system level to establish the available margin.

🔧

Test and Measurement Equipment

The SY88927VZG can be used in test and measurement equipment that must receive a high-speed differential source while driving downstream circuitry through a single-ended output. Its stated 2.5 Gbps capability supports fast test-clock, pattern, or return-path interfaces, while operation from 3.3 V or 5 V supports multiple instrument architectures. Instrument designers should account for the PECL-compatible bias arrangement, connector and fixture losses, and the transition requirements of the measurement path. A short receiver footprint supports compact probe and module designs, but thermal and grounding performance must be verified in the finished instrument enclosure.

Resumen de productos recomendados

SY88927V Base high-speed differential receiver device Se usa en: High-Speed Backplane Interfaces, Telecommunications Clock Recovery, Clock and Data Distribution, High-Speed Data Acquisition, Parallel-to-Serial Systems, Test and Measurement Equipment SY88927VZG-TR Tape-and-reel ordering variant Se usa en: High-Speed Backplane Interfaces, Clock and Data Distribution, High-Speed Data Acquisition, Test and Measurement Equipment THS7316DR Texas Instruments Se usa en: Telecommunications Clock Recovery, Parallel-to-Serial Systems
What is the operating voltage of SY88927VZG?
The SY88927VZG operates from a 3.3 V to 5 V supply. According to the Microchip Technology SY88927V datasheet, the receiver is intended for both 3.3 V and 5 V implementations, allowing the same device family to serve different high-speed interface systems. Supply selection must account for the output bias and termination arrangement used by the surrounding PECL interface.
What is the maximum data rate of SY88927VZG?
The SY88927VZG supports a maximum data rate of 2.5 Gbps. The Microchip Technology SY88927V datasheet identifies the device as a 2.5 Gbps high-speed differential receiver. This rating applies to the receiver circuit when the input, biasing, termination, layout, and downstream interface are implemented according to the manufacturer’s recommended conditions.
Where can I download the SY88927VZG datasheet PDF?
The official SY88927V datasheet PDF is available from Microchip Technology at the manufacturer URL listed on this page. The document describes the 2.5 Gbps differential receiver, its 3.3 V or 5 V operation, electrical characteristics, and application information. Use the manufacturer PDF for the authoritative pin description, recommended circuit, and operating limits.
Where can I find the SY88927VZG pinout?
The SY88927VZG pinout is shown in the manufacturer datasheet for the 8-SOIC package. The package pin description should be used when assigning supply, ground, differential inputs, and outputs on the PCB. Confirm each signal against the exact ordering code and follow the package drawing in the same document before creating artwork.
What can replace SY88927VZG?
The SY88927V datasheet states that the device is functionally equivalent to the EL16V family and offers higher performance, but that statement alone does not establish a pin-for-pin drop-in replacement. A valid replacement must also match the 8-SOIC footprint, supply range, differential input arrangement, output biasing, and 2.5 Gbps signal integrity requirements. Use the manufacturer cross-reference and confirm the complete pin map before substitution.
Is SY88927VZG suitable for high-speed clock recovery?
The SY88927VZG is suitable for high-speed clock recovery because it is a 2.5 Gbps differential receiver with faster output transition capability than the referenced EL16V family. According to the Microchip Technology datasheet, its short transition times suit interfaces with high-frequency sources. Clock jitter, data pattern, and total loop timing still need verification in the completed design.
SY88927VZG vs EL16V - which receiver is better for high-speed links?
The SY88927VZG is generally preferable when the design requires a 2.5 Gbps receiver with faster output transitions. The Microchip Technology SY88927V datasheet describes it as functionally equivalent to the EL16V family but with higher performance capability. An EL16V-family device should only be selected after confirming package, pin, voltage, bias, and timing equivalence.
When should I choose SY88927VZG over a lower-speed receiver?
Choose the SY88927VZG when the interface must support data rates approaching 2.5 Gbps or requires the transition performance associated with the SY88927V family. A lower-speed receiver may be sufficient for slower links and can offer different cost, supply, or channel characteristics. The decision should be based on the required edge rate rather than clock frequency alone.
Is SY88927VZG suitable for telecommunications equipment?
The SY88927VZG is suitable for telecommunications interface stages operating at rates up to 2.5 Gbps. Its differential input improves rejection of common-mode noise, while the single-ended output can feed suitable downstream clock, data, or conversion circuitry. PECL biasing, controlled-impedance routing, and adequate supply decoupling remain essential in telecommunications implementations.
How should the SY88927VZG PCB layout be designed?
Route the differential input as a short, impedance-controlled pair and place the receiver close to the source to minimize loss and reflections. The Microchip Technology application information emphasizes high-speed implementation considerations. Keep decoupling capacitors close to the supply pins, provide an uninterrupted ground path, and follow the manufacturer’s differential impedance and termination recommendations.
How much power and thermal design is needed for SY88927VZG?
The SY88927VZG requires normal high-speed interface thermal planning based on its actual supply current and local board temperature. The manufacturer datasheet identifies 3.3 V and 5 V operating modes, while detailed supply-current and junction-temperature limits should be taken from its electrical-characteristics table. Provide copper area and airflow appropriate to the assembled system.
Is SY88927VZG RoHS compliant?
The RoHS status of the SY88927VZG must be confirmed for the exact orderable suffix through Microchip Technology’s product or environmental-compliance documentation. This package-level interface IC is used in RoHS-controlled designs in many applications, but the exact customer requirement should not be inferred from the device category. Request the applicable declaration for the specific ordering code.
Where to buy SY88927VZG online?
Use the Request a Quote form on this page to ask for SY88927VZG availability, current commercial terms, and lot-related requirements. The form allows a buyer to specify the exact 8-SOIC ordering code, quantity, and delivery constraints. Confirm lifecycle status, packaging, and traceability with the supplier response before releasing a production order.
What is the price of SY88927VZG?
The current commercial price of SY88927VZG should be requested through the Request a Quote form on this page. Quote terms can depend on quantity, packaging, traceability, and delivery requirements. Submit the required quantity and target date to obtain a current offer without relying on stale catalog pricing for this high-speed interface IC.
What is the lead time for SY88927VZG?
The current lead time for SY88927VZG should be confirmed through the Request a Quote form on this page. Enter the required quantity, reel or tray preference, shipment destination, and target production date. The supplier response should include the promised lead time and any lot, date-code, or traceability conditions.
What are the key specifications of SY88927VZG that engineers should know?
The key specifications are a 2.5 Gbps maximum data rate, 3.3 V or 5 V operation, differential input, single-ended output, and an 8-SOIC package. The Microchip Technology SY88927V datasheet also describes the device as functionally equivalent to the EL16V family while offering higher performance capability. Pin-level voltage, timing, and current limits should be taken directly from that datasheet.

Datos de referencia de ingeniería para SY88927VZG — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SY88927VZG when a design needs a 2.5 Gbps differential receiver operating from 3.3 V or 5 V and packaged in an 8-SOIC. It is particularly appropriate for high-speed clock recovery, backplane input stages, data-acquisition interfaces, and distributed clock systems where a differential source must become a single-ended logic signal. The manufacturer describes the SY88927V as functionally equivalent to the EL16V family but with higher performance and faster output transitions. Nevertheless, do not substitute an EL16V-family device without verifying the footprint, pin map, bias network, supply, output level, and timing. If the interface operates materially below 2.5 Gbps, a lower-speed receiver may be acceptable, but its edge-rate behavior must still satisfy the source and channel requirements. For a mixed-voltage system, select the receiver based on the complete output reference and downstream logic requirements, not only on the supply value.

Comparación con alternativas

Parámetro Este producto
Brand Microchip Technology
Package 8-SOIC
Product Type High-speed differential receiver
Maximum Data Rate 2.5 Gbps
Supply Voltage 3.3 V to 5 V
Input Type Differential input
Output Type Single-ended output
Logic Family PECL-compatible
Reference Device Functionally equivalent to EL16V family
Mounting Type Surface mount

Diferenciadores clave

  • High-speed differential input capability (frente a EL16V family)
  • Flexible supply selection (frente a Lower-voltage-only receivers)
  • Fast output transition performance (frente a EL16V family)

Notas de diseño

Route the differential input as a short, symmetric, controlled-impedance pair and place the SY88927VZG close to the source. At a 2.5 Gbps data rate, unequal trace length, an interrupted reference plane, or an abrupt impedance change can produce reflections that distort the receiver’s differential input. Use the manufacturer’s recommended termination and bias arrangement, and evaluate the input return loss across the operating frequency range.

Place supply-decoupling capacitors immediately adjacent to the device supply and ground connections, and provide a low-impedance ground path to the source. The receiver supports 3.3 V and 5 V operation, but the correct supply must also match the output bias and downstream logic environment. Review the manufacturer pin description carefully before routing because signal, bias, supply, and ground assignments must follow the exact package drawing.

Do not treat the statement that the SY88927V is functionally equivalent to the EL16V family as proof of drop-in compatibility. Verify package dimensions, every pin assignment, supply requirements, output bias, propagation timing, and transition performance. Also avoid selecting the receiver solely by clock frequency: the relevant interface criterion is the required data rate and the complete edge-rate behavior of the source, channel, and receiver.

Design the 3.3 V or 5 V supply path for the receiver’s actual operating current and the dynamic requirements of the output network. Use local high-frequency bypassing and avoid sharing narrow return paths between the receiver and noisy switching circuitry. Measure supply ripple at the device pins because supply disturbance can affect the single-ended output even when the differential input itself is clean.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Exact suffix-specific environmental and automotive compliance declarations require confirmation from Microchip Technology.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

SY88927VZG datasheet SY88927VZG pinout SY88927VZG datasheet pdf SY88927VZG equivalent SY88927VZG replacement SY88927VZG cross reference SY88927VZG footprint SY88927VZG price SY88927VZG stock Microchip Technology SY88927VZG SY88927V 2.5Gbps receiver SY88927VZG vs EL16V

Componentes & términos relacionados

Microchip Technology SY88927VZG SY88927V SY88927VZG-TR EL16V high-speed differential receiver differential receiver line receiver interface IC semiconductor PECL 2.5 Gbps 3.3 V 5 V 8-SOIC SOIC family surface mount SMD single-ended output differential input output transition time high-speed clock recovery telecommunications interface backplane interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ