Microchip Technology

SY89876LMI - 2 GHz Programmable Clock Buffer | Microchip Technology

MPN: SY89876LMI ✓ 啟用中
3.3 V Vdss CML, HSTL, LVDS, or LVPECL Rds(on) 16-VFQFN exposed pad, 16-MLF Package 2 GHz Speed
MOQ: 1 |

SY89876LMI 概覽

The Microchip Technology SY89876LMI is a 3.3 V, 2 GHz programmable clock divider and 1:2 fanout buffer with differential input-to-LVDS conversion, internal termination, and a 16-pin VFQFN exposed-pad package. It combines clock division, level conversion, and two-output distribution in one device for high-speed digital systems.

A clock fanout buffer is a clock-and-timing semiconductor that distributes one input signal to multiple outputs while preserving edge timing and signal integrity. The SY89876LMI belongs to the Precision Edge product family and accepts differential CML, HSTL, LVDS, or LVPECL input standards. Its integrated function converts a differential clock into two LVDS outputs, reducing the number of separate divider, level-converter, and buffer components required in a clock tree.

The device supports input clock frequencies up to 2 GHz and uses a 3.3 V supply. Its programmable clock-divider function allows one source clock to be divided before distribution, while the 1:2 output arrangement provides two independently usable LVDS clock paths. Internal input termination simplifies implementation with suitable differential clock sources and reduces the need for separate termination components on the input network.

The SY89876LMI uses Microchip's Precision Edge technology to address demanding clock-distribution applications where low jitter, predictable edge quality, and compact implementation are important. A 1:2 fanout stage can distribute a divided or undivided clock to processors, serializers, transceivers, ADC or DAC clocking circuits, and data-conversion equipment. The exposed pad provides a thermal path from the device to the PCB copper, which is especially important when operating close to the maximum clock frequency.

Typical uses include telecommunications line-card clocking, network-interface clock distribution, high-speed serial links, FPGA or ASIC auxiliary clock generation, and instrumentation requiring compatible differential clock signals. The device can simplify boards that otherwise require separate programmable dividers, logic-level converters, and clock buffers, reducing component count and potential clock-skew mismatches.

PCB implementation should preserve controlled-impedance routing for differential inputs and LVDS outputs. Place the decoupling capacitor close to the supply pin, provide a continuous ground reference beneath the exposed pad, and use the manufacturer datasheet's recommended termination and layout geometry. Verify output timing, jitter, common-mode voltage, and signal amplitude on the target board because trace length and return-path discontinuities can affect high-speed clock performance.

This page combines the device's core clock-tree functions, package information, application guidance, and same-family comparison details to support faster component selection and PCB implementation. The documented 2 GHz ceiling, 3.3 V operation, programmable division, differential-to-LVDS conversion, internal termination, and 1:2 fanout architecture are the principal engineering parameters for evaluating the SY89876LMI.

直接替換替代品,適用於 SY89876LMI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

SY89876UMG

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-VFQFN exposed pad
Ordering suffix changes from LMI to UMG; both are 2 GHz programmable 1:2 LVDS clock devices, with 0 GHz difference in the maximum input frequency

📋 參考替代品(不在目錄中)

SY89876LMI 規格

Product Type Programmable clock divider and 1:2 fanout buffer
Product Series Precision Edge
供應電壓 3.3 V
Maximum Input Clock Frequency 2 GHz
Fanout Ratio 1:2
Input Interface Differential
Input Standards CML, HSTL, LVDS, or LVPECL
Output Interface LVDS
Clock Divider Programmable
Input Termination Internal termination
Output Count 2 outputs
封裝 16-VFQFN exposed pad, 16-MLF
安裝類型 Surface mount

SY89876LMI 16-vfqfn exposed pad, 16-mlf 腳位配置指南

SY89876LMI(16-vfqfn exposed pad, 16-mlf 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

SY89876LMI 的 16-vfqfn exposed pad, 16-mlf 封裝腳位圖

無詳細腳位定義資料: SY89876LMI.

請參閱 資料表 以查看完整腳位配置。

典型應用

SY89876LMI 適用於 6 應用s: Telecommunications Line-Card Clocking, High-Speed Serial-Link Clock Distribution, FPGA and ASIC Auxiliary Clocking, ADC and DAC Sampling-Clock Networks, Network-Interface Clock Fanout, Test and Measurement Instrumentation.

🌐

Telecommunications Line-Card Clocking

The SY89876LMI fits line-card clock distribution where a differential source must be divided and converted into two LVDS clocks. Its 3.3 V supply, operation to 2 GHz, programmable divider, and 1:2 fanout reduce the number of separate clock-tree blocks. According to the Microchip datasheet, differential CML, HSTL, LVDS, and LVPECL inputs are accepted, allowing the device to sit after a serializer, transceiver, or network clock driver. Route both outputs as controlled-impedance differential pairs and provide a solid ground reference beneath the exposed pad.

📶

High-Speed Serial-Link Clock Distribution

The SY89876LMI is useful when a high-speed serial interface needs a locally divided differential clock and two fanout paths. The device supports input clocks up to 2 GHz, accepts multiple differential standards, and converts the selected clock into two LVDS outputs. According to the Microchip datasheet, its programmable divider can be combined with 1:2 distribution in a 16-VFQFN exposed-pad package. Place it close to the transmitter or transceiver clock input and keep output trace lengths matched where phase-sensitive circuitry requires it.

🖥️

FPGA and ASIC Auxiliary Clocking

The SY89876LMI can generate a divided and level-converted auxiliary clock for an FPGA or ASIC clock tree. Its programmable division and 1:2 fanout are useful when one differential input must feed two related destinations, while the differential-to-LVDS architecture matches common high-speed fabric interfaces. According to the Microchip datasheet, the device operates from 3.3 V and handles clocks up to 2 GHz. Validate divider ratios, output phase, jitter, and the FPGA's input requirements before fixing the clock topology.

🎚️

ADC and DAC Sampling-Clock Networks

The SY89876LMI can distribute a divided differential clock to sampling converters when the system needs two LVDS clock outputs from one source. Programmable division provides a way to derive a lower-rate sampling clock from a faster internal reference, while the 1:2 fanout supports two converter or clock-distribution destinations. According to the Microchip datasheet, the part accepts differential CML, HSTL, LVDS, or LVPECL inputs up to 2 GHz. Confirm converter edge requirements, jitter sensitivity, and output-to-output timing in the target design.

🔌

Network-Interface Clock Fanout

The SY89876LMI is appropriate for network-interface clock trees that require a differential input, selectable division, and two low-voltage differential outputs. The 2 GHz input limit provides substantial headroom for common high-speed interface clock rates, while programmable division can reduce board-level clock-generation complexity. According to the Microchip datasheet, the device combines any-differential input-to-LVDS conversion, internal termination, and 1:2 fanout in a 3.3 V package. Use controlled-impedance routing and verify recoverability and jitter margins with the actual PHY or serializer.

🔧

Test and Measurement Instrumentation

The SY89876LMI can provide programmable clock division and dual LVDS distribution in compact instrumentation where several high-speed sections require related clocks. Its 3.3 V operation, differential input support, and 2 GHz maximum input frequency make it suitable for generating clocks close to an instrument's internal reference. According to the Microchip datasheet, the 1:2 fanout and internal termination are integrated into the 16-VFQFN exposed-pad package. Account for instrument grounding, clock-edge requirements, output jitter, and thermal conditions during hardware validation.

推薦產品摘要

SY89876LMI Microchip Technology 用於: Telecommunications Line-Card Clocking, High-Speed Serial-Link Clock Distribution, FPGA and ASIC Auxiliary Clocking, ADC and DAC Sampling-Clock Networks, Network-Interface Clock Fanout, Test and Measurement Instrumentation SY89876UMG Same-family clock-buffer candidate 用於: Telecommunications Line-Card Clocking, High-Speed Serial-Link Clock Distribution, FPGA and ASIC Auxiliary Clocking, ADC and DAC Sampling-Clock Networks, Network-Interface Clock Fanout, Test and Measurement Instrumentation
What is the SY89876LMI?
The SY89876LMI is a 3.3 V programmable clock divider and 1:2 differential clock fanout buffer that supports input frequencies up to 2 GHz. According to the Microchip datasheet, it accepts differential CML, HSTL, LVDS, or LVPECL inputs and provides LVDS outputs. It also includes internal input termination and is packaged in a 16-VFQFN exposed-pad configuration.
What are the key specifications of SY89876LMI that engineers should know?
The principal SY89876LMI specifications are a 3.3 V supply, operation up to 2 GHz, programmable clock division, and a 1:2 output fanout ratio. The Microchip datasheet identifies differential CML, HSTL, LVDS, and LVPECL input support, differential-to-LVDS conversion, internal input termination, and a 16-VFQFN exposed-pad package. These parameters define its suitability for compact, high-speed clock trees.
Where can I download the SY89876LMI datasheet PDF?
The SY89876LMI datasheet can be downloaded from the manufacturer document linked on this page. According to the Microchip datasheet, the device is a 3.3 V, 2 GHz programmable clock divider and 1:2 fanout buffer with any-differential input-to-LVDS conversion and internal termination. Use the datasheet's pin-description, recommended-layout, and electrical-characteristics tables for final PCB and signal-integrity decisions.
Where is the SY89876LMI pinout?
The SY89876LMI pin assignment is found in the pin-description and package-drawing sections of the Microchip datasheet. The component uses a 16-VFQFN exposed-pad package with 16 numbered terminals. Assign PCB tracks directly from that table, preserve the exposed-pad land pattern, and verify the exposed pad's electrical connection against the recommended layout.
What input clock standards does SY89876LMI support?
The SY89876LMI accepts differential CML, HSTL, LVDS, and LVPECL input standards. According to the Microchip datasheet, the device operates from a 3.3 V supply and handles clock inputs up to 2 GHz while converting the differential signal into two LVDS outputs. Confirm source amplitude, common-mode voltage, and termination requirements before connecting a particular clock driver.
What clock frequencies can SY89876LMI distribute?
The SY89876LMI supports input clock frequencies up to 2 GHz. According to the Microchip datasheet, its Precision Edge architecture combines programmable clock division, differential-to-LVDS conversion, and a 1:2 fanout function. Actual output frequency depends on the selected divider ratio and the programmed device configuration, while usable margin should be evaluated against timing and jitter requirements.
Can SY89876LMI replace a separate divider and LVDS clock buffer?
The SY89876LMI can consolidate a programmable divider, differential-to-LVDS conversion, and 1:2 fanout stage into one clock-and-timing IC. According to the Microchip datasheet, its 3.3 V operation and 2 GHz input capability support high-speed clock trees. Consolidation can reduce component count, but the original design still needs to be checked for required divider ratios, output phase relationships, timing margins, and board-level impedance.
What is the difference between SY89876LMI and SY89876UMG?
The SY89876LMI and SY89876UMG are orderable members of the same Microchip SY89876 programmable clock-divider family. The SY89876LMI is the 16-MLF ordering variant identified for this product, while SY89876UMG uses the UMG package suffix. Their pin compatibility, divider settings, grade, temperature range, and exact exposed-pad layout must be confirmed in the Microchip datasheet before either part replaces the other.
When should I choose SY89876LMI over a standalone clock buffer?
Choose the SY89876LMI when the design requires programmable division, differential-to-LVDS conversion, and 1:2 distribution in one device. According to the Microchip datasheet, the SY89876LMI supports clocks up to 2 GHz and multiple differential input standards. A standalone buffer is preferable when the source already provides the required frequency and LVDS level and no integrated divider or level conversion is needed.
Is SY89876LMI suitable for telecommunications clock distribution?
The SY89876LMI is suitable for telecommunications clock distribution when the board requires a divided differential clock converted to two LVDS outputs. According to the Microchip datasheet, it operates at 3.3 V, supports input frequencies up to 2 GHz, and accepts several differential logic standards. Confirm jitter, temperature range, output timing, and compliance requirements for the specific line card before production release.
What is the best drop-in replacement for SY89876LMI?
The closest identified same-family drop-in candidate is the Microchip Technology SY89876UMG, subject to verification of its pinout, divider configuration, temperature grade, and package land pattern. The SY89876LMI combines programmable division, 1:2 fanout, differential input, and LVDS output, so a replacement must preserve all four functions rather than only matching the frequency rating. Use the manufacturer cross-reference and datasheet before substitution.
What can replace SY89876LMI?
The SY89876UMG is the most plausible documented same-family replacement for the SY89876LMI because both belong to Microchip's programmable clock-divider family. However, a valid drop-in substitution requires the same 16-terminal footprint, pin functions, supply voltage, divider behavior, output standard, and electrical timing. The exact ordering suffix must also be checked against the production BOM and environmental requirements.
Is there a Microchip equivalent for SY89876LMI?
Microchip's SY89876UMG is the same-family Microchip alternative associated with the SY89876LMI function, but it should not be treated as a confirmed drop-in replacement without package and pinout verification. The Microchip datasheet defines SY89876LMI as a 3.3 V, 2 GHz programmable divider with 1:2 LVDS fanout. The Microchip cross-reference search is the appropriate tool for validating an approved production substitute.
Where can I request a quote for SY89876LMI?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and package availability for the SY89876LMI. The device is specified as a 3.3 V, 2 GHz programmable clock divider and 1:2 LVDS fanout buffer in a 16-VFQFN exposed-pad package. Include the required ordering suffix and quantity with the request so the manufacturing and logistics response matches the intended BOM.
How should SY89876LMI be placed on a PCB?
Place the SY89876LMI close to the clock source and its destination circuits, connect the supply bypass capacitor close to the device, and route differential signals over continuous ground planes. According to the Microchip datasheet, the part uses internal input termination, differential-to-LVDS conversion, and an exposed pad. Follow the recommended package geometry, preserve the pad's thermal and electrical path, and maintain controlled impedance for both input and output nets.

工程參考資料,適用於 SY89876LMI — 比較、設計指引及合規資訊。

選型指南

Choose the SY89876LMI when the clock tree needs programmable division, differential-to-LVDS conversion, and two-way fanout in one compact device. Its 3.3 V supply and 2 GHz input capability make it appropriate for high-speed line cards, serial links, FPGA or ASIC auxiliary clocking, and conversion-clock distribution. Select the SY89876UMG when it satisfies the required ordering suffix, temperature grade, pinout, and package dimensions while providing the same core 2 GHz programmable 1:2 LVDS function. Use a standalone clock buffer when no programmable division or differential level conversion is required. Before approving any substitution, verify divider-ratio coverage, input termination, output phase relationship, jitter, output amplitude, common-mode voltage, exposed-pad connection, and thermal performance on the intended PCB.

與替代品比較

參數 本產品 SY89876UMG
Package 16-VFQFN exposed pad, 16-MLF 16-VFQFN exposed pad
Brand Microchip Technology Microchip Technology
Supply Voltage 3.3 V 3.3 V
Maximum Input Frequency 2 GHz 2 GHz
Fanout Ratio 1:2 1:2
Input Interface Differential Differential
Output Interface LVDS LVDS
Clock Divider Programmable Programmable
Input Termination Internal termination Internal termination

主要差異化特點

  • Combines divider, level conversion, and fanout (對比SY89876UMG)
  • Multi-standard differential input support (對比SY89876UMG)
  • Compact clock-tree integration (對比Discrete divider plus LVDS buffer)

設計說明

Place the SY89876LMI close to the clock source and the circuits receiving its two LVDS outputs. Route the differential input and both differential outputs over continuous reference planes with matched impedance and minimized stubs. Follow the manufacturer datasheet's recommended land geometry and maintain adequate spacing between the exposed pad and high-speed signal traces.

The 16-VFQFN exposed pad is the primary thermal path from the device to the PCB. Keep the exposed-pad land unobstructed and add thermal vias where the recommended layout permits. When the device operates near its 2 GHz frequency limit, provide as much uninterrupted copper as practical and verify junction temperature under the highest expected clock activity and ambient condition.

Treat the input as a controlled-impedance differential pair and preserve a continuous return path beneath it. The internal termination should be considered when selecting source impedance and driver amplitude. Verify output common-mode voltage, differential amplitude, rise and fall time, jitter, and clock-to-clock phase using the target board because package and routing parasitics can influence a 2 GHz clock signal.

Do not assume that any 1:2 LVDS clock buffer is an equivalent replacement. The SY89876LMI also provides programmable division, differential input conversion, internal termination, and a 3.3 V supply. Confirm the divider ratio range, output phase relationship, pin functions, package dimensions, exposed-pad connection, and temperature grade before approving a substitute.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit compliance declarations are stated on the cited product pages. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering suffix before production use.

相關搜尋

SY89876LMI datasheet SY89876LMI datasheet pdf SY89876LMI pinout SY89876LMI equivalent SY89876LMI replacement SY89876LMI vs SY89876UMG SY89876LMI 2 GHz clock buffer SY89876LMI 3.3 V LVDS SY89876LMI 16-VFQFN pinout SY89876LMI price SY89876LMI stock Microchip SY89876LMI

相關元件與詞彙

Microchip Technology SY89876LMI SY89876UMG programmable clock divider 1:2 clock fanout buffer clock and timing IC Precision Edge differential clock input LVDS output CML HSTL LVPECL programmable divider internal termination 2 GHz clock 3.3 V power supply 16-VFQFN exposed pad QFN family surface-mount package semiconductor clock-tree distribution telecommunications line card FPGA clocking ADC and DAC sampling clock
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情