SY89876LMI - 2 GHz Programmable Clock Buffer | Microchip Technology
料号: SY89876LMI ✓ 量产中SY89876LMI 概述
A clock fanout buffer is a clock-and-timing semiconductor that distributes one input signal to multiple outputs while preserving edge timing and signal integrity. The SY89876LMI belongs to the Precision Edge product family and accepts differential CML, HSTL, LVDS, or LVPECL input standards. Its integrated function converts a differential clock into two LVDS outputs, reducing the number of separate divider, level-converter, and buffer components required in a clock tree.
The device supports input clock frequencies up to 2 GHz and uses a 3.3 V supply. Its programmable clock-divider function allows one source clock to be divided before distribution, while the 1:2 output arrangement provides two independently usable LVDS clock paths. Internal input termination simplifies implementation with suitable differential clock sources and reduces the need for separate termination components on the input network.
The SY89876LMI uses Microchip's Precision Edge technology to address demanding clock-distribution applications where low jitter, predictable edge quality, and compact implementation are important. A 1:2 fanout stage can distribute a divided or undivided clock to processors, serializers, transceivers, ADC or DAC clocking circuits, and data-conversion equipment. The exposed pad provides a thermal path from the device to the PCB copper, which is especially important when operating close to the maximum clock frequency.
Typical uses include telecommunications line-card clocking, network-interface clock distribution, high-speed serial links, FPGA or ASIC auxiliary clock generation, and instrumentation requiring compatible differential clock signals. The device can simplify boards that otherwise require separate programmable dividers, logic-level converters, and clock buffers, reducing component count and potential clock-skew mismatches.
PCB implementation should preserve controlled-impedance routing for differential inputs and LVDS outputs. Place the decoupling capacitor close to the supply pin, provide a continuous ground reference beneath the exposed pad, and use the manufacturer datasheet's recommended termination and layout geometry. Verify output timing, jitter, common-mode voltage, and signal amplitude on the target board because trace length and return-path discontinuities can affect high-speed clock performance.
This page combines the device's core clock-tree functions, package information, application guidance, and same-family comparison details to support faster component selection and PCB implementation. The documented 2 GHz ceiling, 3.3 V operation, programmable division, differential-to-LVDS conversion, internal termination, and 1:2 fanout architecture are the principal engineering parameters for evaluating the SY89876LMI.
直接替换替代料: SY89876LMI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SY89876UMG
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89876LMI 规格参数
| Product Type | Programmable clock divider and 1:2 fanout buffer |
| Product Series | Precision Edge |
| 电源电压 | 3.3 V |
| Maximum Input Clock Frequency | 2 GHz |
| Fanout Ratio | 1:2 |
| Input Interface | Differential |
| Input Standards | CML, HSTL, LVDS, or LVPECL |
| Output Interface | LVDS |
| Clock Divider | Programmable |
| Input Termination | Internal termination |
| Output Count | 2 outputs |
| 封装 | 16-VFQFN exposed pad, 16-MLF |
| 安装类型 | Surface mount |
SY89876LMI 16-vfqfn exposed pad, 16-mlf 引脚配置指南
SY89876LMI(16-vfqfn exposed pad, 16-mlf 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY89876LMI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY89876LMI 适用于 6 应用s: Telecommunications Line-Card Clocking, High-Speed Serial-Link Clock Distribution, FPGA and ASIC Auxiliary Clocking, ADC and DAC Sampling-Clock Networks, Network-Interface Clock Fanout, Test and Measurement Instrumentation.
Telecommunications Line-Card Clocking
The SY89876LMI fits line-card clock distribution where a differential source must be divided and converted into two LVDS clocks. Its 3.3 V supply, operation to 2 GHz, programmable divider, and 1:2 fanout reduce the number of separate clock-tree blocks. According to the Microchip datasheet, differential CML, HSTL, LVDS, and LVPECL inputs are accepted, allowing the device to sit after a serializer, transceiver, or network clock driver. Route both outputs as controlled-impedance differential pairs and provide a solid ground reference beneath the exposed pad.
推荐
High-Speed Serial-Link Clock Distribution
The SY89876LMI is useful when a high-speed serial interface needs a locally divided differential clock and two fanout paths. The device supports input clocks up to 2 GHz, accepts multiple differential standards, and converts the selected clock into two LVDS outputs. According to the Microchip datasheet, its programmable divider can be combined with 1:2 distribution in a 16-VFQFN exposed-pad package. Place it close to the transmitter or transceiver clock input and keep output trace lengths matched where phase-sensitive circuitry requires it.
推荐
FPGA and ASIC Auxiliary Clocking
The SY89876LMI can generate a divided and level-converted auxiliary clock for an FPGA or ASIC clock tree. Its programmable division and 1:2 fanout are useful when one differential input must feed two related destinations, while the differential-to-LVDS architecture matches common high-speed fabric interfaces. According to the Microchip datasheet, the device operates from 3.3 V and handles clocks up to 2 GHz. Validate divider ratios, output phase, jitter, and the FPGA's input requirements before fixing the clock topology.
推荐
ADC and DAC Sampling-Clock Networks
The SY89876LMI can distribute a divided differential clock to sampling converters when the system needs two LVDS clock outputs from one source. Programmable division provides a way to derive a lower-rate sampling clock from a faster internal reference, while the 1:2 fanout supports two converter or clock-distribution destinations. According to the Microchip datasheet, the part accepts differential CML, HSTL, LVDS, or LVPECL inputs up to 2 GHz. Confirm converter edge requirements, jitter sensitivity, and output-to-output timing in the target design.
推荐
Network-Interface Clock Fanout
The SY89876LMI is appropriate for network-interface clock trees that require a differential input, selectable division, and two low-voltage differential outputs. The 2 GHz input limit provides substantial headroom for common high-speed interface clock rates, while programmable division can reduce board-level clock-generation complexity. According to the Microchip datasheet, the device combines any-differential input-to-LVDS conversion, internal termination, and 1:2 fanout in a 3.3 V package. Use controlled-impedance routing and verify recoverability and jitter margins with the actual PHY or serializer.
推荐
Test and Measurement Instrumentation
The SY89876LMI can provide programmable clock division and dual LVDS distribution in compact instrumentation where several high-speed sections require related clocks. Its 3.3 V operation, differential input support, and 2 GHz maximum input frequency make it suitable for generating clocks close to an instrument's internal reference. According to the Microchip datasheet, the 1:2 fanout and internal termination are integrated into the 16-VFQFN exposed-pad package. Account for instrument grounding, clock-edge requirements, output jitter, and thermal conditions during hardware validation.
推荐
推荐产品汇总
工程参考数据: SY89876LMI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY89876UMG |
|---|---|---|
| Package | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad |
| Brand | Microchip Technology | Microchip Technology |
| Supply Voltage | 3.3 V | 3.3 V |
| Maximum Input Frequency | 2 GHz | 2 GHz |
| Fanout Ratio | 1:2 | 1:2 |
| Input Interface | Differential | Differential |
| Output Interface | LVDS | LVDS |
| Clock Divider | Programmable | Programmable |
| Input Termination | Internal termination | Internal termination |
关键差异点
- Combines divider, level conversion, and fanout (对比 SY89876UMG)
- Multi-standard differential input support (对比 SY89876UMG)
- Compact clock-tree integration (对比 Discrete divider plus LVDS buffer)
设计说明
Place the SY89876LMI close to the clock source and the circuits receiving its two LVDS outputs. Route the differential input and both differential outputs over continuous reference planes with matched impedance and minimized stubs. Follow the manufacturer datasheet's recommended land geometry and maintain adequate spacing between the exposed pad and high-speed signal traces.
The 16-VFQFN exposed pad is the primary thermal path from the device to the PCB. Keep the exposed-pad land unobstructed and add thermal vias where the recommended layout permits. When the device operates near its 2 GHz frequency limit, provide as much uninterrupted copper as practical and verify junction temperature under the highest expected clock activity and ambient condition.
Treat the input as a controlled-impedance differential pair and preserve a continuous return path beneath it. The internal termination should be considered when selecting source impedance and driver amplitude. Verify output common-mode voltage, differential amplitude, rise and fall time, jitter, and clock-to-clock phase using the target board because package and routing parasitics can influence a 2 GHz clock signal.
Do not assume that any 1:2 LVDS clock buffer is an equivalent replacement. The SY89876LMI also provides programmable division, differential input conversion, internal termination, and a 3.3 V supply. Confirm the divider ratio range, output phase relationship, pin functions, package dimensions, exposed-pad connection, and temperature grade before approving a substitute.
合规信息
No explicit compliance declarations are stated on the cited product pages. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering suffix before production use.