TAS5028APAG - 8-Channel Digital Audio PWM Processor | TI
MPN: TAS5028APAG ✓ 啟用中TAS5028APAG 概覽
A digital audio PWM processor is an audio interface and modulation IC positioned between a digital signal processor and a multichannel power-amplifier stage. It receives serialized digital audio information, formats it into the modulation signals required by the amplifier channels, and supports automatic control of individual output configurations. This function places the TAS5028APAG within the broader hierarchy of audio interface IC, signal-processing IC, and power-management semiconductor.
The principal features include eight PWM output channels, support for both I2C and I2S digital-audio interfaces, operation from 3 V to 3.6 V, and an operating temperature range from 0 °C to 70 °C. The integrated eight-channel architecture reduces the number of separate digital audio modulators required in a surround-sound, home-theater, or multi-zone amplifier. Its 64-TQFP package provides a compact surface-mount solution for equipment with substantial channel count.
The processor is intended to work with digital signal processors and audio power stages, allowing audio data, control information, and channel-specific modulation to share a compact digital control architecture. Automatic adjustment of control configurations can simplify system initialization and channel management. Designers should still verify amplifier compatibility, required control timing, and output behavior against the manufacturer datasheet before committing to a production board.
Typical uses include 5.1-channel and 7.1-channel home-theater amplifiers, multi-zone audio systems, powered speakers, soundbars, and professional audio equipment. It is particularly useful when the source processor already outputs digital audio and the power amplifier stage expects PWM control signals rather than an analog audio input.
PCB implementation requires careful separation between sensitive digital communication lines, supply routing, and high-current amplifier outputs. Although the TAS5028APAG itself is a digital controller, its I2C and I2S interfaces can be sensitive to clock jitter, ground bounce, and supply disturbances. Follow the pin-description table and recommended component-placement guidance in the manufacturer datasheet when assigning traces and decoupling.
This product page organizes the processor's key electrical characteristics, package details, ordering-code alternatives, practical application guidance, and design considerations. The information supports early architecture selection and PCB planning, while production qualification should use the complete manufacturer datasheet and the exact ordering suffix intended for assembly.
直接替換替代品,適用於 TAS5028APAG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TAS5028APAG (相同外形與佔位) — 差異在於 Package Type.
TAS5028APAGR
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5028APAGG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5028PAG
✅ 直接替換聯絡詢價
查看資料表 →TAS5028PAGR
✅ 直接替換聯絡詢價
查看資料表 →TAS5028PAGG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5028APAG 最大額定值與電氣特性
| Product Type | 8-channel digital audio PWM processor |
| Number of Audio Channels | 8 channels |
| Supply Voltage Range | 3 V to 3.6 V |
| Digital Audio Interfaces | I2C and I2S |
| 工作溫度範圍 | 0 °C to 70 °C |
| Package Type | 64-TQFP |
| Package Body Size | 10 mm × 10 mm |
| 安裝類型 | Surface mount |
| RoHS Compliance | RoHS3 compliant |
| Processor Function | Digital pulse-width modulation for eight audio channels |
| Control Interface | I2C control interface |
| Audio Data Interface | I2S audio data interface |
| 輸出配置 | Eight independent PWM output channels |
TAS5028APAG 10 mm × 10 mm 腳位配置指南
TAS5028APAG(10 mm × 10 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5028APAG.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5028APAG 適用於 6 應用s: 5.1-Channel Home-Theater Amplifier, 7.1-Channel Surround-Sound Amplifier, Multi-Zone Audio Amplifier, Powered Speaker Network, Soundbar Multi-Channel Amplification, Professional Multi-Channel Audio System.
5.1-Channel Home-Theater Amplifier
The TAS5028APAG fits a digital-input home-theater amplifier because it provides eight PWM channels for surround-sound processing in a single 64-TQFP device. I2S can receive the multichannel audio stream from a digital signal processor, while I2C provides a separate configuration path. A 5.1 design can use the available channels for main, center, surround, and subwoofer amplification. With a 3 V to 3.6 V supply requirement, the processor should sit behind a regulator that maintains the specified range without excessive noise. The principal engineering benefit is channel integration, although the downstream power amplifiers must accept compatible PWM signaling and meet the timing requirements specified in the datasheet.
推薦
7.1-Channel Surround-Sound Amplifier
The TAS5028APAG is appropriate for a 7.1-channel amplifier because its eight-channel PWM architecture closely matches the seven main playback channels plus one subwoofer or additional auxiliary zone. Digital audio can be supplied through I2S from the system DSP, avoiding a separate bank of eight digital-to-analog converters before the power stages. The processor operates from 3 V to 3.6 V and supports I2C configuration, which allows channel setup to be managed separately from the audio stream. Layout should keep the I2S clock and data routes short, provide local supply bypassing, and maintain continuous ground references so switching power-amplifier currents do not corrupt the digital control signals.
推薦
Multi-Zone Audio Amplifier
A multi-zone residential or commercial amplifier can use the TAS5028APAG to distribute eight digital audio channels across separate listening areas. The I2S interface carries synchronized audio content, while I2C can be used for configuration and control tasks associated with the processor. This architecture is useful when the upstream DSP already performs source selection, mixing, and volume processing. Because the chip generates PWM control signals rather than delivering analog line-level audio, every destination requires a compatible power-amplifier stage. Engineers should evaluate channel latency, clock routing, thermal margins in the amplifiers, and the consequences of a 3 V to 3.6 V processor supply before deploying it across multiple rooms.
推薦
Powered Speaker Network
The TAS5028APAG can support powered speakers that receive digital audio from a central DSP and use local Class-D power stages. Its eight PWM channels allow one processor to coordinate several speaker outputs without requiring eight separate digital modulators. The 10 mm by 10 mm TQFP package is useful in compact electronics, while the 3 V to 3.6 V operating range fits many low-voltage digital subsystems. Implementation still requires a low-noise supply, careful I2S clock routing, and verification that the selected amplifier inputs accept the processor's PWM format. Firmware and system designers should also preserve correct channel mapping and gain-control sequencing during startup and standby transitions.
推薦
Soundbar Multi-Channel Amplification
The TAS5028APAG is suitable for the amplification section of a soundbar because the eight-channel architecture can coordinate multiple loudspeaker paths from a digital source. I2S connects the soundbar DSP to the processor, and I2C supports configuration without sharing the audio-data bus. Integrating the modulation function into one 64-TQFP package simplifies board partitioning compared with a collection of discrete channel modulators. In a soundbar, acoustic performance can be affected by amplifier-to-speaker relationships, so synchronization among all eight channels is important. Validate timing, power sequencing, and channel delay against the manufacturer specifications, and isolate high-current amplifier routing from the processor's digital interface.
推薦
Professional Multi-Channel Audio System
The TAS5028APAG can serve as the digital modulation controller in a professional audio system that distributes eight synchronized channels from a central DSP. Its I2S and I2S-compatible I2C control paths support a structured digital architecture, while the processor's 0 °C to 70 °C range suits many indoor commercial environments. The component is intended to control compatible power stages rather than directly drive loudspeakers, so amplifier input format, latency, and fault behavior must be verified. Professional installations should also account for EMI from high-power switching stages, reliable grounding, and the processor's narrow 3 V to 3.6 V supply range when designing redundant or temperature-controlled installations.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5028APAG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5028APAGR | TAS5028APAGG4 | TAS5028PAG | TAS5028PAGR | TAS5028PAGG4 |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Function | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor |
| Number of Channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Operating Supply Range | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Digital Interfaces | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S |
| Operating Temperature Range | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Special Ordering Attribute | APAG ordering code | APAGR reel ordering code | APAGG4 green ordering code | PAG ordering code | PAGR reel ordering code | PAGG4 green ordering code |
主要差異化特點
- Eight-channel digital modulation in one processor (對比TAS5028PAG)
- Direct I2S and I2C integration (對比TAS5028APAGR)
- Compact 10 mm by 10 mm surface-mount implementation (對比TAS5028PAGG4)
設計說明
Place the TAS5028APAG's decoupling capacitors adjacent to the relevant supply and ground pins, using the manufacturer-datasheet layout and capacitance recommendations. Keep the 3 V to 3.6 V supply rail free of Class-D switching-node transients. A local regulator may be appropriate when the system rail is higher or noisier, provided its transient response does not disturb the digital audio interfaces.
Route I2S clock, data, and I2C signals as short, continuous traces away from Class-D switching outputs and high-current speaker paths. Maintain a continuous ground reference under the device and use a quiet digital ground strategy if the system separates analog and digital domains. Validate setup time, hold time, clock jitter, and maximum operating frequency against the complete Texas Instruments timing specification.
Use the official 64-TQFP land pattern and verify pin-1 orientation against the package drawing before releasing artwork. Preserve courtyard clearance for the 10 mm by 10 mm TQFP and provide adequate solder mask and paste uniformity across all 64 leads. Check the assembly drawing for any exposed-pad or thermal requirements before finalizing the footprint.
Do not treat the TAS5028APAG as a direct speaker driver; it generates PWM control signals for compatible power-amplifier stages. Confirm the downstream amplifier's expected input format, gain behavior, timing, and fault handling. Also verify the operating temperature range of 0 °C to 70 °C against the enclosure's internal temperature rather than relying only on the ambient specification.
合規資訊
The product information identifies TAS5028APAG as RoHS3 compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact orderable part.