TAS5028APAG - 8-Channel Digital Audio PWM Processor | TI
MPN: TAS5028APAG ✓ Hoạt độngTAS5028APAG Tóm tắt
A digital audio PWM processor is an audio interface and modulation IC positioned between a digital signal processor and a multichannel power-amplifier stage. It receives serialized digital audio information, formats it into the modulation signals required by the amplifier channels, and supports automatic control of individual output configurations. This function places the TAS5028APAG within the broader hierarchy of audio interface IC, signal-processing IC, and power-management semiconductor.
The principal features include eight PWM output channels, support for both I2C and I2S digital-audio interfaces, operation from 3 V to 3.6 V, and an operating temperature range from 0 °C to 70 °C. The integrated eight-channel architecture reduces the number of separate digital audio modulators required in a surround-sound, home-theater, or multi-zone amplifier. Its 64-TQFP package provides a compact surface-mount solution for equipment with substantial channel count.
The processor is intended to work with digital signal processors and audio power stages, allowing audio data, control information, and channel-specific modulation to share a compact digital control architecture. Automatic adjustment of control configurations can simplify system initialization and channel management. Designers should still verify amplifier compatibility, required control timing, and output behavior against the manufacturer datasheet before committing to a production board.
Typical uses include 5.1-channel and 7.1-channel home-theater amplifiers, multi-zone audio systems, powered speakers, soundbars, and professional audio equipment. It is particularly useful when the source processor already outputs digital audio and the power amplifier stage expects PWM control signals rather than an analog audio input.
PCB implementation requires careful separation between sensitive digital communication lines, supply routing, and high-current amplifier outputs. Although the TAS5028APAG itself is a digital controller, its I2C and I2S interfaces can be sensitive to clock jitter, ground bounce, and supply disturbances. Follow the pin-description table and recommended component-placement guidance in the manufacturer datasheet when assigning traces and decoupling.
This product page organizes the processor's key electrical characteristics, package details, ordering-code alternatives, practical application guidance, and design considerations. The information supports early architecture selection and PCB planning, while production qualification should use the complete manufacturer datasheet and the exact ordering suffix intended for assembly.
Bộ thay thế dễ dàng lắp đặt cho TAS5028APAG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5028APAG (cùng hình factor và footprint) — khác nhau ở Package Type.
TAS5028APAGR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TAS5028APAGG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TAS5028PAG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5028PAGR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5028PAGG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TAS5028APAG Tỷ lệ tối đa & tính chất điện
| Product Type | 8-channel digital audio PWM processor |
| Number of Audio Channels | 8 channels |
| Supply Voltage Range | 3 V to 3.6 V |
| Digital Audio Interfaces | I2C and I2S |
| Khoảng nhiệt độ hoạt động | 0 °C to 70 °C |
| Package Type | 64-TQFP |
| Package Body Size | 10 mm × 10 mm |
| Kiểu lắp đặt | Surface mount |
| RoHS Compliance | RoHS3 compliant |
| Processor Function | Digital pulse-width modulation for eight audio channels |
| Control Interface | I2C control interface |
| Audio Data Interface | I2S audio data interface |
| Cấu hình đầu ra | Eight independent PWM output channels |
Hướng dẫn cấu hình chân TAS5028APAG 10 mm × 10 mm
Cấu hình chân cho TAS5028APAG (10 mm × 10 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5028APAG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5028APAG phù hợp cho 6 Áp dụngs: 5.1-Channel Home-Theater Amplifier, 7.1-Channel Surround-Sound Amplifier, Multi-Zone Audio Amplifier, Powered Speaker Network, Soundbar Multi-Channel Amplification, Professional Multi-Channel Audio System.
5.1-Channel Home-Theater Amplifier
The TAS5028APAG fits a digital-input home-theater amplifier because it provides eight PWM channels for surround-sound processing in a single 64-TQFP device. I2S can receive the multichannel audio stream from a digital signal processor, while I2C provides a separate configuration path. A 5.1 design can use the available channels for main, center, surround, and subwoofer amplification. With a 3 V to 3.6 V supply requirement, the processor should sit behind a regulator that maintains the specified range without excessive noise. The principal engineering benefit is channel integration, although the downstream power amplifiers must accept compatible PWM signaling and meet the timing requirements specified in the datasheet.
Được đề xuất
7.1-Channel Surround-Sound Amplifier
The TAS5028APAG is appropriate for a 7.1-channel amplifier because its eight-channel PWM architecture closely matches the seven main playback channels plus one subwoofer or additional auxiliary zone. Digital audio can be supplied through I2S from the system DSP, avoiding a separate bank of eight digital-to-analog converters before the power stages. The processor operates from 3 V to 3.6 V and supports I2C configuration, which allows channel setup to be managed separately from the audio stream. Layout should keep the I2S clock and data routes short, provide local supply bypassing, and maintain continuous ground references so switching power-amplifier currents do not corrupt the digital control signals.
Được đề xuất
Multi-Zone Audio Amplifier
A multi-zone residential or commercial amplifier can use the TAS5028APAG to distribute eight digital audio channels across separate listening areas. The I2S interface carries synchronized audio content, while I2C can be used for configuration and control tasks associated with the processor. This architecture is useful when the upstream DSP already performs source selection, mixing, and volume processing. Because the chip generates PWM control signals rather than delivering analog line-level audio, every destination requires a compatible power-amplifier stage. Engineers should evaluate channel latency, clock routing, thermal margins in the amplifiers, and the consequences of a 3 V to 3.6 V processor supply before deploying it across multiple rooms.
Được đề xuất
Powered Speaker Network
The TAS5028APAG can support powered speakers that receive digital audio from a central DSP and use local Class-D power stages. Its eight PWM channels allow one processor to coordinate several speaker outputs without requiring eight separate digital modulators. The 10 mm by 10 mm TQFP package is useful in compact electronics, while the 3 V to 3.6 V operating range fits many low-voltage digital subsystems. Implementation still requires a low-noise supply, careful I2S clock routing, and verification that the selected amplifier inputs accept the processor's PWM format. Firmware and system designers should also preserve correct channel mapping and gain-control sequencing during startup and standby transitions.
Được đề xuất
Soundbar Multi-Channel Amplification
The TAS5028APAG is suitable for the amplification section of a soundbar because the eight-channel architecture can coordinate multiple loudspeaker paths from a digital source. I2S connects the soundbar DSP to the processor, and I2C supports configuration without sharing the audio-data bus. Integrating the modulation function into one 64-TQFP package simplifies board partitioning compared with a collection of discrete channel modulators. In a soundbar, acoustic performance can be affected by amplifier-to-speaker relationships, so synchronization among all eight channels is important. Validate timing, power sequencing, and channel delay against the manufacturer specifications, and isolate high-current amplifier routing from the processor's digital interface.
Được đề xuất
Professional Multi-Channel Audio System
The TAS5028APAG can serve as the digital modulation controller in a professional audio system that distributes eight synchronized channels from a central DSP. Its I2S and I2S-compatible I2C control paths support a structured digital architecture, while the processor's 0 °C to 70 °C range suits many indoor commercial environments. The component is intended to control compatible power stages rather than directly drive loudspeakers, so amplifier input format, latency, and fault behavior must be verified. Professional installations should also account for EMI from high-power switching stages, reliable grounding, and the processor's narrow 3 V to 3.6 V supply range when designing redundant or temperature-controlled installations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5028APAG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5028APAGR | TAS5028APAGG4 | TAS5028PAG | TAS5028PAGR | TAS5028PAGG4 |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Function | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor |
| Number of Channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Operating Supply Range | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Digital Interfaces | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S |
| Operating Temperature Range | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Special Ordering Attribute | APAG ordering code | APAGR reel ordering code | APAGG4 green ordering code | PAG ordering code | PAGR reel ordering code | PAGG4 green ordering code |
Bảo phân biệt quan trọng
- Eight-channel digital modulation in one processor (vsTAS5028PAG)
- Direct I2S and I2C integration (vsTAS5028APAGR)
- Compact 10 mm by 10 mm surface-mount implementation (vsTAS5028PAGG4)
Ghi chú thiết kế
Place the TAS5028APAG's decoupling capacitors adjacent to the relevant supply and ground pins, using the manufacturer-datasheet layout and capacitance recommendations. Keep the 3 V to 3.6 V supply rail free of Class-D switching-node transients. A local regulator may be appropriate when the system rail is higher or noisier, provided its transient response does not disturb the digital audio interfaces.
Route I2S clock, data, and I2C signals as short, continuous traces away from Class-D switching outputs and high-current speaker paths. Maintain a continuous ground reference under the device and use a quiet digital ground strategy if the system separates analog and digital domains. Validate setup time, hold time, clock jitter, and maximum operating frequency against the complete Texas Instruments timing specification.
Use the official 64-TQFP land pattern and verify pin-1 orientation against the package drawing before releasing artwork. Preserve courtyard clearance for the 10 mm by 10 mm TQFP and provide adequate solder mask and paste uniformity across all 64 leads. Check the assembly drawing for any exposed-pad or thermal requirements before finalizing the footprint.
Do not treat the TAS5028APAG as a direct speaker driver; it generates PWM control signals for compatible power-amplifier stages. Confirm the downstream amplifier's expected input format, gain behavior, timing, and fault handling. Also verify the operating temperature range of 0 °C to 70 °C against the enclosure's internal temperature rather than relying only on the ambient specification.
Thông tin tuân thủ
The product information identifies TAS5028APAG as RoHS3 compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact orderable part.