TAS5601DCAR - 20W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5601DCAR ✓ 啟用中TAS5601DCAR 概覽
A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an analog audio waveform. Within the amplifier hierarchy, it belongs to the digital amplifier family, power-stage IC category, and broader audio power-management semiconductor group. Compared with a linear audio amplifier, a Class-D stage can deliver high output efficiency while placing less heat in the speaker and amplifier output stages. The TAS5601 is designed as a power stage that accepts a digital audio signal and drives speakers without requiring the traditional analog input-voltage signal path.
The headline specifications are 20 W per channel, a 10 V to 26 V supply range, and greater than 90% efficiency into an 8 Ω load. The device can operate as a 2-channel stereo amplifier or a 4-channel single-ended amplifier. Its digital interface supports the common audio-system use cases for compact consumer, multimedia, and powered-speaker products. An operating-temperature range of −40 °C to 85 °C and a surface-mount HTSSOP package support industrial and commercial equipment designs.
The TAS5601 uses a feedback-based Class-D power-stage architecture, with the option to drive either bridge-tied or single-ended loads. Feedback-based operation helps the output stage track the intended signal while maintaining low distortion in the target application. The manufacturer identifies efficiency above 90% into an 8 Ω load as sufficient to eliminate the need for an external heat sink in typical configurations. Actual thermal performance still depends on supply voltage, channel loading, board copper, ambient temperature, and the duration of maximum-power operation.
Typical applications include compact stereo speakers, multimedia speaker systems, soundbars, television audio modules, portable consumer equipment, and powered peripheral systems. The 4 Ω minimum load capability gives designers flexibility when selecting conventional speaker impedances. The digital input architecture is particularly useful where the audio source already delivers a digital signal, allowing the power stage to be placed close to the speaker connector and away from sensitive source circuitry.
PCB design should prioritize short power-loop paths, continuous output-current copper, thermal-via placement beneath the exposed pad, and clean separation between input and output routing. The HTSSOP thermal pad must be connected to the intended ground plane with multiple vias, and output filtering must follow the manufacturer reference layout to control switching-related interference. Component placement should also minimize loop area around the power supply and output bridge.
This product page consolidates the official device specifications, pin-compatible-replacement assessment, application guidance, comparison parameters, and practical layout considerations into a design-focused reference. It helps engineers distinguish electrical compatibility from mere package similarity while planning amplifier routing, speaker loading, thermal management, and sourcing.
直接替換替代品,適用於 TAS5601DCAR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品TAS5601DCAR 最大額定值與電氣特性
| Product Type | Stereo Class-D digital amplifier power stage |
| Maximum Output Power | 20 W per channel |
| Supply Voltage Range | 10 V to 26 V |
| Input Signal Type | PWM single-ended (SE) |
| Supported Channel Configurations | 2-channel stereo or 4-channel quad |
| Supported Load Configurations | 4 single-ended speakers, 2 bridge-tied speakers, or a combination |
| Minimum Speaker Impedance | 4 Ω |
| Efficiency Into 8 Ω Load | Greater than 90% |
| 工作溫度範圍 | −40 °C to 85 °C |
| 封裝 | 56-pin HTSSOP (DCA) |
| Exposed Thermal Pad | Present |
| 安裝類型 | Surface mount |
| Carrier Configuration | Tape and reel |
| External Heat Sink Requirement | Not required for the manufacturer-described 8 Ω efficiency condition |
TAS5601DCAR 56-pin htssop (dca) 腳位配置指南
TAS5601DCAR(56-pin htssop (dca) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5601DCAR.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5601DCAR 適用於 6 應用s: Compact Stereo Speaker, Multimedia Speaker System, Television Audio Module, Powered Soundbar Speaker, Portable Consumer Speaker, Industrial Audio Annunciator.
Compact Stereo Speaker
The TAS5601DCAR fits a compact stereo speaker that needs 20 W per channel and accepts a digital PWM audio signal. Its 10 V to 26 V supply range covers common amplified-speaker power rails, while the 4 Ω load capability supports common nominal speaker impedances. The manufacturer reports greater than 90% efficiency into an 8 Ω load, reducing the heat that must be removed from the amplifier enclosure. Place the power stage near the speaker connector, route the output bridge with short, wide copper paths, and connect the HTSSOP exposed pad to a via-rich ground plane for predictable thermal performance.
推薦
Multimedia Speaker System
A multimedia speaker system can use the TAS5601DCAR as a 2-channel, 20 W-per-channel power stage when the audio subsystem supplies PWM single-ended signals. The 10 V to 26 V operating range supports a protected amplifier rail derived from a higher-voltage adapter, and the device can also be arranged for four single-ended outputs. Its high efficiency into an 8 Ω load limits amplifier heat compared with a linear output stage. Use short digital-input routing, solid output filtering, and generous supply decoupling so switching current remains inside the compact enclosure.
推薦
Television Audio Module
The TAS5601DCAR is suitable for television or display audio modules requiring 20 W per channel from a 10 V to 26 V supply. The PWM single-ended input can accept the output of an upstream digital audio processor, while the stereo configuration simplifies two-channel speaker drive. The exposed-pad HTSSOP package supports compact, surface-mount construction, and the manufacturer-reported efficiency above 90% into an 8 Ω load helps control thermal rise behind limited-area enclosures. Layout should separate sensitive digital audio routing from high-current output paths and use multiple thermal vias beneath the exposed pad.
推薦
Powered Soundbar Speaker
A powered soundbar can use TAS5601DCAR devices as efficient Class-D output stages when each amplifier section must deliver 20 W per channel. The device supports stereo bridge-tied operation and four-channel single-ended operation, allowing a soundbar architecture to be adapted to its speaker arrangement. With a 10 V to 26 V supply and a 4 Ω minimum load, the IC fits conventional compact-speaker designs. The principal engineering concern is output-loop control: use the manufacturer-recommended filter and layout, minimize copper inductance, and provide uninterrupted ground and supply planes.
推薦
Portable Consumer Speaker
The TAS5601DCAR can serve as the output stage in a portable consumer speaker when its system supply remains within 10 V to 26 V and the available amplifier power is sufficient. Twenty watts per channel and support for 4 Ω loads provide useful output flexibility, while greater than 90% efficiency into an 8 Ω load improves battery-to-audio conversion. Because enclosure space and heat dissipation are constrained, use the exposed pad as the primary thermal path and avoid enclosing the package without an airflow path. Confirm transient output power and battery droop before finalizing the speaker and supply design.
推薦
Industrial Audio Annunciator
The TAS5601DCAR is applicable to industrial audio products that require efficient Class-D speaker drive and a conventional 10 V to 26 V internal rail. Its −40 °C to 85 °C operating range supports temperature-controlled industrial equipment, while the 20 W-per-channel capability covers practical alert and monitor speakers. A four-channel single-ended arrangement can also serve zones or localized audio outputs. Confirm electromagnetic-emissions and output-filter requirements for the finished equipment, maintain high-current copper area, and provide the exposed pad with a directly connected thermal-via array.
推薦
工程參考資料,適用於 TAS5601DCAR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Texas Instruments |
| Package | 56-pin HTSSOP (DCA) |
| Product Type | Class-D digital amplifier power stage |
| Output Power | 20 W per channel |
| Supply Voltage Range | 10 V to 26 V |
| Audio Input | PWM single-ended |
| Channel Configurations | Stereo or quad |
| Speaker Load Capability | 4 Ω minimum |
| Efficiency Into 8 Ω Load | Greater than 90% |
| Operating Temperature | −40 °C to 85 °C |
主要差異化特點
- Supports stereo and quad output arrangements (對比TPA3124D2PWP)
- Wide 10 V to 26 V amplifier supply range (對比TPA3124D2PWP)
- High efficiency into 8 Ω loads (對比TPA3124D2PWP)
設計說明
Connect the 56-pin HTSSOP exposed pad directly to the ground plane through multiple thermal vias near the pad perimeter and center. The manufacturer reports greater than 90% efficiency into an 8 Ω load, but maximum-output operation still produces heat that depends on supply voltage, load, ambient temperature, and copper area. Preserve uninterrupted ground-plane area and avoid thermal isolation beneath the package.
Route the output bridge, supply connections, and output filters as short and compact as practical because switching current creates high di/dt in PCB inductance. Use wide copper for power and speaker paths, place input and output return paths separately, and place output-filter components at the amplifier pins. Follow the manufacturer reference layout to control ringing, electromagnetic emissions, and instability.
Keep the supply within the 10 V to 26 V operating range and account for startup and load transients when sizing the rail and decoupling. Place the required input capacitors close to the device power pins with a low-impedance ground return. Validate the design at maximum channel load, minimum supply voltage, and maximum junction temperature rather than relying only on typical operating conditions.
合規資訊
The available product information identifies the device, package, operating range, power rating, and temperature range but does not state specific compliance declarations.