Texas Instruments

TAS5601DCAR - 20W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5601DCAR ✓ فعال
10 V to 26 V Vdss 56-pin HTSSOP (DCA) Package
MOQ: 1 |

TAS5601DCAR جائزہ

Texas Instruments TAS5601DCAR is a 20 W-per-channel stereo Class-D digital amplifier power stage with PWM single-ended input, a 10 V to 26 V supply range, and a 56-pin HTSSOP DCA package. It supports four single-ended speakers, two bridge-tied speakers, or a mixture of single-ended and bridge-tied loads, including speaker impedances as low as 4 Ω.

A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an analog audio waveform. Within the amplifier hierarchy, it belongs to the digital amplifier family, power-stage IC category, and broader audio power-management semiconductor group. Compared with a linear audio amplifier, a Class-D stage can deliver high output efficiency while placing less heat in the speaker and amplifier output stages. The TAS5601 is designed as a power stage that accepts a digital audio signal and drives speakers without requiring the traditional analog input-voltage signal path.

The headline specifications are 20 W per channel, a 10 V to 26 V supply range, and greater than 90% efficiency into an 8 Ω load. The device can operate as a 2-channel stereo amplifier or a 4-channel single-ended amplifier. Its digital interface supports the common audio-system use cases for compact consumer, multimedia, and powered-speaker products. An operating-temperature range of −40 °C to 85 °C and a surface-mount HTSSOP package support industrial and commercial equipment designs.

The TAS5601 uses a feedback-based Class-D power-stage architecture, with the option to drive either bridge-tied or single-ended loads. Feedback-based operation helps the output stage track the intended signal while maintaining low distortion in the target application. The manufacturer identifies efficiency above 90% into an 8 Ω load as sufficient to eliminate the need for an external heat sink in typical configurations. Actual thermal performance still depends on supply voltage, channel loading, board copper, ambient temperature, and the duration of maximum-power operation.

Typical applications include compact stereo speakers, multimedia speaker systems, soundbars, television audio modules, portable consumer equipment, and powered peripheral systems. The 4 Ω minimum load capability gives designers flexibility when selecting conventional speaker impedances. The digital input architecture is particularly useful where the audio source already delivers a digital signal, allowing the power stage to be placed close to the speaker connector and away from sensitive source circuitry.

PCB design should prioritize short power-loop paths, continuous output-current copper, thermal-via placement beneath the exposed pad, and clean separation between input and output routing. The HTSSOP thermal pad must be connected to the intended ground plane with multiple vias, and output filtering must follow the manufacturer reference layout to control switching-related interference. Component placement should also minimize loop area around the power supply and output bridge.

This product page consolidates the official device specifications, pin-compatible-replacement assessment, application guidance, comparison parameters, and practical layout considerations into a design-focused reference. It helps engineers distinguish electrical compatibility from mere package similarity while planning amplifier routing, speaker loading, thermal management, and sourcing.

کے لیے ڈراپ اِن متبادل TAS5601DCAR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

TAS5601DCAR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Stereo Class-D digital amplifier power stage
Maximum Output Power 20 W per channel
Supply Voltage Range 10 V to 26 V
Input Signal Type PWM single-ended (SE)
Supported Channel Configurations 2-channel stereo or 4-channel quad
Supported Load Configurations 4 single-ended speakers, 2 bridge-tied speakers, or a combination
Minimum Speaker Impedance 4 Ω
Efficiency Into 8 Ω Load Greater than 90%
آپریٹنگ درجہ حرارت رینج −40 °C to 85 °C
پیکیج 56-pin HTSSOP (DCA)
Exposed Thermal Pad Present
ماؤنٹنگ ٹائپ Surface mount
Carrier Configuration Tape and reel
External Heat Sink Requirement Not required for the manufacturer-described 8 Ω efficiency condition

TAS5601DCAR 56-pin htssop (dca) پن کنفیگریشن گائیڈ

TAS5601DCAR (56-pin htssop (dca) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

TAS5601DCAR کے لیے 56-pin htssop (dca) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TAS5601DCAR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TAS5601DCAR کے لیے موزوں ہے 6 ایپلیکیشنs: Compact Stereo Speaker, Multimedia Speaker System, Television Audio Module, Powered Soundbar Speaker, Portable Consumer Speaker, Industrial Audio Annunciator.

🎧

Compact Stereo Speaker

The TAS5601DCAR fits a compact stereo speaker that needs 20 W per channel and accepts a digital PWM audio signal. Its 10 V to 26 V supply range covers common amplified-speaker power rails, while the 4 Ω load capability supports common nominal speaker impedances. The manufacturer reports greater than 90% efficiency into an 8 Ω load, reducing the heat that must be removed from the amplifier enclosure. Place the power stage near the speaker connector, route the output bridge with short, wide copper paths, and connect the HTSSOP exposed pad to a via-rich ground plane for predictable thermal performance.

🔊

Multimedia Speaker System

A multimedia speaker system can use the TAS5601DCAR as a 2-channel, 20 W-per-channel power stage when the audio subsystem supplies PWM single-ended signals. The 10 V to 26 V operating range supports a protected amplifier rail derived from a higher-voltage adapter, and the device can also be arranged for four single-ended outputs. Its high efficiency into an 8 Ω load limits amplifier heat compared with a linear output stage. Use short digital-input routing, solid output filtering, and generous supply decoupling so switching current remains inside the compact enclosure.

📺

Television Audio Module

The TAS5601DCAR is suitable for television or display audio modules requiring 20 W per channel from a 10 V to 26 V supply. The PWM single-ended input can accept the output of an upstream digital audio processor, while the stereo configuration simplifies two-channel speaker drive. The exposed-pad HTSSOP package supports compact, surface-mount construction, and the manufacturer-reported efficiency above 90% into an 8 Ω load helps control thermal rise behind limited-area enclosures. Layout should separate sensitive digital audio routing from high-current output paths and use multiple thermal vias beneath the exposed pad.

🎵

Powered Soundbar Speaker

A powered soundbar can use TAS5601DCAR devices as efficient Class-D output stages when each amplifier section must deliver 20 W per channel. The device supports stereo bridge-tied operation and four-channel single-ended operation, allowing a soundbar architecture to be adapted to its speaker arrangement. With a 10 V to 26 V supply and a 4 Ω minimum load, the IC fits conventional compact-speaker designs. The principal engineering concern is output-loop control: use the manufacturer-recommended filter and layout, minimize copper inductance, and provide uninterrupted ground and supply planes.

📱

Portable Consumer Speaker

The TAS5601DCAR can serve as the output stage in a portable consumer speaker when its system supply remains within 10 V to 26 V and the available amplifier power is sufficient. Twenty watts per channel and support for 4 Ω loads provide useful output flexibility, while greater than 90% efficiency into an 8 Ω load improves battery-to-audio conversion. Because enclosure space and heat dissipation are constrained, use the exposed pad as the primary thermal path and avoid enclosing the package without an airflow path. Confirm transient output power and battery droop before finalizing the speaker and supply design.

🏭

Industrial Audio Annunciator

The TAS5601DCAR is applicable to industrial audio products that require efficient Class-D speaker drive and a conventional 10 V to 26 V internal rail. Its −40 °C to 85 °C operating range supports temperature-controlled industrial equipment, while the 20 W-per-channel capability covers practical alert and monitor speakers. A four-channel single-ended arrangement can also serve zones or localized audio outputs. Confirm electromagnetic-emissions and output-filter requirements for the finished equipment, maintain high-current copper area, and provide the exposed pad with a directly connected thermal-via array.

What are the key specifications of TAS5601DCAR that engineers should know?
The TAS5601DCAR is a 20 W-per-channel Class-D digital amplifier power stage operating from a 10 V to 26 V supply in a 56-pin HTSSOP DCA package. According to the Texas Instruments product page, it supports four single-ended speakers, two bridge-tied speakers, or mixed configurations, accepts PWM single-ended audio, and provides greater than 90% efficiency into an 8 Ω load.
What is the operating voltage of TAS5601DCAR?
The TAS5601DCAR operates from 10 V to 26 V. Texas Instruments identifies this range on the official product page for the stereo Class-D power stage. Designers should also preserve adequate supply headroom for switching and output-current transients, while keeping the supply within the stated 26 V maximum.
What speaker configurations can TAS5601DCAR drive?
The TAS5601DCAR can drive four single-ended speakers, two bridge-tied speakers, or a combination of single-ended and bridge-tied loads. According to Texas Instruments, each stereo channel can deliver 20 W, and the power stage supports loads as low as 4 Ω. Output topology must be configured and routed exactly as shown in the manufacturer reference circuit.
Is TAS5601DCAR suitable for stereo and multichannel audio systems?
Yes, the TAS5601DCAR supports both 2-channel stereo and 4-channel quad operation. Texas Instruments describes a 20 W-per-channel stereo power stage that can also drive four single-ended loads. This makes it suitable for compact stereo speakers, multimedia systems, television audio, and other applications requiring efficient digital-input speaker amplification.
Does TAS5601DCAR need an external heat sink?
The Texas Instruments product page states that efficiency greater than 90% into an 8 Ω load eliminates the need for an external heat sink. That statement does not guarantee unlimited thermal margin. Actual junction temperature still depends on supply voltage, channel loading, ambient temperature, PCB copper area, exposed-pad via layout, and sustained output level.
Where can I download the TAS5601DCAR datasheet PDF?
The official TAS5601 product page at Texas Instruments provides the manufacturer documentation and ordering information for TAS5601DCAR. Use the TAS5601 product page as the primary entry point for the datasheet PDF, application guidance, pin information, and ordering details. The DCA orderable designation identifies the 56-pin HTSSOP package configuration.
Where can I find the TAS5601DCAR pinout and package information?
The TAS5601DCAR pinout is defined by the manufacturer datasheet and the DCA package drawing. Texas Instruments identifies the device as a 56-pin HTSSOP power stage with an exposed thermal pad. Use the datasheet pin-description table and land-pattern drawing when assigning nets and PCB pads, especially for the exposed pad and multiple ground connections.
What can replace TAS5601DCAR?
No confirmed pin-to-pin drop-in replacement for TAS5601DCAR is established by the available cross-reference information. TAS5601DCA is an ordering/carrier configuration of the same device rather than a distinct drop-in alternative, while TPA3124-family devices use different packages. Before replacing the IC, verify every power pin, signal pin, exposed-pad connection, and output topology against the target board.
Is TAS5601DCA the same as TAS5601DCAR?
TAS5601DCA and TAS5601DCAR identify the same Texas Instruments TAS5601 amplifier configuration, with the suffix reflecting the carrier format rather than a different electrical design. The manufacturer lists these exact products as identical but offered with different carrier options. They should not be counted as independent alternatives for engineering comparison.
TAS5601DCAR vs TPA3124D2PWP: which is better for a speaker amplifier?
TAS5601DCAR and TPA3124D2PWP are not direct drop-in choices because their package and pin arrangements differ. The TAS5601DCAR is a 20 W-per-channel, 10 V to 26 V PWM-input power stage in a 56-pin HTSSOP DCA package, whereas the TPA3124D2PWP uses a different package and board footprint. Choose based on the complete electrical specification and redesign the PCB rather than treating them as interchangeable.
When should I choose TAS5601DCAR over another Class-D power stage?
Choose TAS5601DCAR when the design specifically benefits from a 20 W-per-channel PWM-input power stage, a 10 V to 26 V supply range, and support for both bridge-tied and single-ended speaker arrangements. Its greater than 90% efficiency into an 8 Ω load also reduces thermal demand. Alternatives may suit other supply, input, channel-count, or package requirements.
Where can I buy TAS5601DCAR online?
Use the Request a Quote form on this page to request TAS5601DCAR availability, lead time, and an order quote. The form lets engineers identify the exact DCA orderable, reel quantity, and delivery requirements with the supplier. Current commercial details should be confirmed through that form rather than relying on a static distributor listing.
What is the price of TAS5601DCAR?
Pricing for TAS5601DCAR depends on order quantity, reel configuration, and current supplier terms. Use the Request a Quote form on this page to obtain the current price for the exact MPN and required quantity. The structured pricing panel reflects any qualifying current quantity-break data, while quote requests cover nonstandard order quantities.
What is the lead time for TAS5601DCAR?
The current lead time for TAS5601DCAR depends on supplier inventory and the requested reel quantity. Use the Request a Quote form on this page to confirm current scheduling for the exact DCA orderable. For production planning, include the required quantity, date code preference, and target delivery date when submitting the request.
Is TAS5601DCAR in stock?
Stock status changes as components are allocated and packed, so it should be confirmed for the exact orderable and reel quantity. Use the Request a Quote form on this page to check current availability and lead time. Texas Instruments lists TAS5601DCAR as an orderable 56-pin DCA configuration, allowing the supplier to respond against the requested commercial parameters.

کے لیے انجینئرنگ ریفرنس ڈیٹا TAS5601DCAR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose TAS5601DCAR when the product needs a 20 W-per-channel PWM-input Class-D power stage, a 10 V to 26 V supply, and the flexibility to drive bridge-tied or single-ended speakers. Its greater than 90% efficiency into an 8 Ω load is attractive in compact stereo, multimedia, television, and industrial audio products. Do not treat TPA3124D2PWP or other similarly rated amplifiers as drop-in replacements because their package footprints and pin assignments differ; those choices require PCB and schematic review. TAS5601DCA offers the same device in a different carrier format, so it is an ordering option rather than a distinct engineering alternative. Before committing, confirm audio-interface format, channel architecture, speaker impedance, output-filter design, thermal performance, and lifecycle requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Texas Instruments
Package 56-pin HTSSOP (DCA)
Product Type Class-D digital amplifier power stage
Output Power 20 W per channel
Supply Voltage Range 10 V to 26 V
Audio Input PWM single-ended
Channel Configurations Stereo or quad
Speaker Load Capability 4 Ω minimum
Efficiency Into 8 Ω Load Greater than 90%
Operating Temperature −40 °C to 85 °C

اہم امتیازی خصوصیات

  • Supports stereo and quad output arrangements (بمقابلہTPA3124D2PWP)
  • Wide 10 V to 26 V amplifier supply range (بمقابلہTPA3124D2PWP)
  • High efficiency into 8 Ω loads (بمقابلہTPA3124D2PWP)

ڈیزائن نوٹس

Connect the 56-pin HTSSOP exposed pad directly to the ground plane through multiple thermal vias near the pad perimeter and center. The manufacturer reports greater than 90% efficiency into an 8 Ω load, but maximum-output operation still produces heat that depends on supply voltage, load, ambient temperature, and copper area. Preserve uninterrupted ground-plane area and avoid thermal isolation beneath the package.

Route the output bridge, supply connections, and output filters as short and compact as practical because switching current creates high di/dt in PCB inductance. Use wide copper for power and speaker paths, place input and output return paths separately, and place output-filter components at the amplifier pins. Follow the manufacturer reference layout to control ringing, electromagnetic emissions, and instability.

Keep the supply within the 10 V to 26 V operating range and account for startup and load transients when sizing the rail and decoupling. Place the required input capacitors close to the device power pins with a low-impedance ground return. Validate the design at maximum channel load, minimum supply voltage, and maximum junction temperature rather than relying only on typical operating conditions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information identifies the device, package, operating range, power rating, and temperature range but does not state specific compliance declarations.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

TAS5601DCAR datasheet TAS5601DCAR datasheet pdf TAS5601DCAR pinout TAS5601DCAR 56 pin HTSSOP TAS5601DCAR 20W stereo amplifier TAS5601DCAR 10V to 26V TAS5601DCAR equivalent TAS5601DCAR replacement TAS5601DCAR vs TPA3124D2PWP Texas Instruments TAS5601DCAR TAS5601DCAR speaker amplifier TAS5601DCAR price TAS5601DCAR stock TAS5601DCAR class-D power stage TAS5601 DCA package application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments TAS5601 TAS5601DCAR TAS5601DCA TPA3124D2PWP Class-D amplifier digital amplifier audio power stage PWM single-ended input bridge-tied load 20 W per channel 10 V to 26 V 4 Ω speaker load greater than 90% efficiency HTSSOP DCA package exposed thermal pad surface mount audio power management semiconductor compact stereo speaker multimedia speaker television audio
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں