Texas Instruments

TAS5611APHD - 125W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5611APHD ✓ 啟用中
16 V to 34.1 V Vdss HTQFP-64 (PHD), 14 mm x 14 mm Package
MOQ: 1 |

TAS5611APHD 概覽

The Texas Instruments TAS5611APHD is an analog-input Class-D audio power amplifier rated for 125 W stereo output or 250 W mono output from a 16 V to 34.1 V supply. The device is packaged in a 64-pin HTQFP PHD package measuring 14 mm by 14 mm and incorporates PurePath HD closed-loop feedback technology.

A Class-D audio amplifier is a switching power stage that delivers high audio output power with substantially greater efficiency than a traditional linear amplifier. The TAS5611A family combines a differential analog input, a Class-D output stage, and integrated closed-loop feedback. This places it in the audio amplifier hierarchy alongside stereo power amplifiers, speaker drivers, and power-management ICs used in home audio, automotive, and industrial systems.

Key features include configurable mono or stereo operation, 125 W per channel in stereo mode, 250 W in mono mode, and an operating supply range of 16 V to 34.1 V. PurePath HD feedback is intended to improve distortion and frequency-response performance in the power stage. The device accepts an analog input and provides a differential speaker output, allowing direct integration into powered speakers and multi-channel audio systems.

The PHD package is a 64-pin HTQFP with an exposed thermal pad. Its high-output topology makes thermal management and PCB copper layout critical: power-stage losses must be transferred through the package and board rather than treated as only an IC-level concern. The manufacturer product page lists the operating temperature as 0 °C to 70 °C for this orderable part. Exact feedback, modulation, efficiency, and thermal values should be confirmed against the manufacturer datasheet before a production design is released.

Typical applications include powered bookshelf speakers, compact home-theater amplifiers, professional audio equipment, soundbars, and automotive-style audio modules. Stereo operation uses the device as a dual-channel 125 W amplifier, while bridged mono operation combines the channels for up to 250 W into one speaker. The wide 16 V to 34.1 V supply range suits systems using a nominal 24 V automotive or industrial bus after appropriate regulation and protection.

A critical design requirement is to provide the datasheet-recommended power and ground layout, use a low-inductance speaker-output path, and connect the exposed thermal pad to an adequate copper area. The analog input and feedback network also require careful grounding to prevent channel interaction. Validate peak thermal conditions and speaker impedance at the maximum intended output power.

This product guide combines the exact orderable-part characteristics, package details, application guidance, replacement considerations, and practical layout checks needed to evaluate the TAS5611APHD as a high-power Class-D audio solution.

直接替換替代品,適用於 TAS5611APHD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TAS5611APHD (相同外形與佔位) — 差異在於 Product Type.

Texas Instruments
Product Type: Class D audio power amplifier
比較對象 TAS5611APHD →

TAS5611PHD

✅ 直接替換
Texas Instruments
📦 HTQFP-64 (PHD)
Analog-input Class-D audio power stage · PurePath HD · 125 W · 250 W · 4 ohm to 8 ohm · 32.5 V · <0.03% · 1-channel mono or 2-channel stereo

聯絡詢價

查看資料表 →

TAS5611APHDR

✅ 直接替換
📦 HTQFP-64 (PHD)
Same 125 W stereo and 250 W mono electrical specification with a 16 V to 34.1 V supply; ordering suffix differs by shipping form

📋 參考替代品(不在目錄中)

TAS5612PHD

✅ 直接替換
Texas Instruments
📦 HTQFP-64 (PHD)
Class D audio power amplifier · PurePath HD integrated closed-loop feedback · 125 W per channel · 250 W · 1-channel mono or 2-channel stereo · 4 ohm to 8 ohm · 16 V to 34.1 V · 10.8 V to 13.2 V

聯絡詢價

查看資料表 →

TAS5612PHDR

✅ 直接替換
📦 HTQFP-64 (PHD)
Same 64-pin HTQFP and 125 W stereo class as TAS5611APHD; package family matches, while exact pinout and output-performance differences require datasheet verification

📋 參考替代品(不在目錄中)

TAS5612APHDR

✅ 直接替換
📦 HTQFP-64 (PHD)
Same 64-pin HTQFP high-power Class-D format and 125 W stereo comparison class; exact input, feedback, and control-pin compatibility must be confirmed

📋 參考替代品(不在目錄中)

TAS5611APHD 最大額定值與電氣特性

Product Type Analog-input Class-D audio power amplifier
Amplifier Configuration 1-channel mono or 2-channel stereo
Maximum Stereo Output Power 125 W
Maximum Mono Output Power 250 W
Supply Voltage Range 16 V to 34.1 V
Feedback Technology PurePath HD integrated closed-loop feedback
Input Signal Type Analog differential input
Output Signal Type Differential speaker output
封裝 HTQFP-64 (PHD), 14 mm x 14 mm
腳位數 64 pins
Exposed Thermal Pad Present
工作溫度 0 °C to 70 °C
安裝類型 Surface mount

TAS5611APHD htqfp-64 (phd), 14 mm x 14 mm 腳位配置指南

TAS5611APHD(htqfp-64 (phd), 14 mm x 14 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TAS5611APHD 的 htqfp-64 (phd), 14 mm x 14 mm 封裝腳位圖

無詳細腳位定義資料: TAS5611APHD.

請參閱 資料表 以查看完整腳位配置。

典型應用

TAS5611APHD 適用於 6 應用s: Powered Bookshelf Speakers, Home Theater Amplifier, Automotive Audio Power Module, Professional Speaker Amplifier, Soundbar Subwoofer Amplifier, Industrial Audio System.

🎧

Powered Bookshelf Speakers

TAS5611APHD fits a powered bookshelf speaker because it delivers up to 125 W per channel in stereo mode and accepts a differential analog input from a preamplifier or digital-to-analog converter. The 16 V to 34.1 V supply range supports higher-voltage amplifier modules without an extremely low rail requirement. Its PurePath HD closed-loop feedback is intended to maintain low distortion across the power stage. The principal design constraint is thermal management: the 64-pin HTQFP exposes a thermal pad, so substantial PCB copper and careful high-current routing are needed to sustain high output power.

📺

Home Theater Amplifier

The TAS5611APHD can implement a compact high-power stereo amplification channel for a home-theater receiver or active soundbar. Its 125 W stereo rating provides substantial headroom for typical monitor speakers, while analog input allows direct integration with a conventional audio signal chain. The 250 W mono capability can also support a bridged subwoofer or other single-channel high-power output. Designers should follow the manufacturer power-stage layout guidance, preserve short speaker-current paths, and verify amplifier stability, thermal rise, and protection behavior with the intended speaker impedance.

🚗

Automotive Audio Power Module

TAS5611APHD is architecturally suitable for a 24 V-class vehicle audio power module because its stated 16 V to 34.1 V supply range covers the nominal automotive battery rail. The 125 W stereo configuration can drive multiple high-efficiency speakers, while the high-power output stage reduces the need for separate discrete speaker drivers. Production automotive use still requires confirmation of qualification, temperature grade, transient protection, and load-dump strategy. The listed 0 °C to 70 °C operating range and unconfirmed AEC-Q100 status mean the device should not be treated as automatically automotive-qualified.

🔊

Professional Speaker Amplifier

The TAS5611APHD can serve as the output stage in a professional powered-speaker amplifier, particularly where analog input and high continuous power are required. Its 125 W per-channel stereo capability and 250 W bridged mono mode cover common passive-speaker power ranges. Closed-loop PurePath HD feedback is intended to improve linearity relative to conventional open-loop Class-D implementations. Because power capability depends on thermal design, supply impedance, output filtering, and speaker loading, production hardware should be evaluated with the exact enclosure, PCB, load, and thermal boundary rather than relying only on the headline wattage.

🔉

Soundbar Subwoofer Amplifier

TAS5611APHD is suitable for a soundbar or compact subwoofer module requiring substantial analog-input power from a 16 V to 34.1 V supply. In bridged mono mode, its 250 W capability targets a high-efficiency woofer, while stereo mode can support passive soundbar channels or a two-channel subwoofer arrangement. The large exposed thermal pad makes board copper essential for sustained output. Keep the analog input and feedback network away from the switching and speaker-return paths, and use the manufacturer-recommended output network to minimize EMI and maintain stable operation.

🏭

Industrial Audio System

TAS5611APHD can provide high-power analog audio amplification in an industrial announcement, intercom, or installation-speaker system operating from a regulated 24 V rail. The device supports either two 125 W channels or one 250 W bridged output, giving designers flexibility in channel count and load configuration. Industrial systems commonly require EMI control and dependable thermal performance, making the exposed-pad copper and low-inductance output routing essential. Confirm the supported speaker impedance, input coupling, fault protection, and operating-temperature requirements against the complete manufacturer datasheet before production release.

What is the TAS5611APHD?
The TAS5611APHD is a Texas Instruments analog-input Class-D audio power amplifier that delivers up to 125 W per channel in stereo mode or 250 W into one speaker in mono mode. It operates from a 16 V to 34.1 V supply and uses PurePath HD closed-loop feedback technology. According to the Texas Instruments TAS5611A product page, the orderable device is supplied in a 64-pin HTQFP PHD package measuring 14 mm by 14 mm.
How much power can TAS5611APHD deliver?
TAS5611APHD can deliver up to 125 W per channel in a stereo configuration and up to 250 W in mono configuration. These ratings apply to the device configuration and test conditions defined by the manufacturer, so speaker impedance, supply voltage, cooling, and PCB layout remain important engineering variables. The Texas Instruments TAS5611A product page identifies the device as a 125 W stereo and 250 W mono amplifier.
What is the operating voltage of TAS5611APHD?
TAS5611APHD operates from 16 V to 34.1 V. This range makes the amplifier suitable for power systems built around a nominal 24 V source when appropriate input filtering, protection, and decoupling are applied. According to the Texas Instruments TAS5611A product page, the recommended supply operating range is 16 V through 34.1 V; individual rail and bypass requirements should be followed from the manufacturer datasheet.
Where can I download the TAS5611APHD datasheet PDF?
The TAS5611APHD datasheet and supporting design resources are available from the official Texas Instruments TAS5611A product page at https://www.ti.com/product/TAS5611A/part-details/TAS5611APHD. The manufacturer page identifies TAS5611APHD as the 64-pin PHD package variant and provides the device data, application information, ordering information, and downloadable technical documents used for design review.
Where can I find the TAS5611APHD pinout?
The TAS5611APHD pin configuration is found in the pin-description table and package drawing in the Texas Instruments TAS5611A datasheet. The part uses a 64-pin HTQFP PHD package, so engineers should map all power, ground, analog-input, feedback, control, and exposed-pad connections directly from the manufacturer document. Do not infer the pinout from the 64-pin count alone because exposed-pad construction makes careful pad assignment essential.
What is the difference between TAS5611APHD and TAS5611APHDR?
TAS5611APHD and TAS5611APHDR identify the same TAS5611A electrical device in the same 64-pin HTQFP PHD package, with the final ordering code distinguishing the shipping form. According to the Texas Instruments product-page results, both provide 125 W stereo or 250 W mono Class-D amplification with a 16 V to 34.1 V supply. The suffix distinction should therefore be handled as a procurement or packaging attribute rather than as an audio-performance change.
Is TAS5611APHD suitable for automotive audio systems?
TAS5611APHD is electrically suited to 24 V-class audio systems because its stated supply range includes 16 V to 34.1 V, but automotive production use additionally requires confirmation of qualification, temperature coverage, transient protection, and load-dump requirements. The listed operating range is 0 °C to 70 °C, and the available information does not establish AEC-Q100 qualification. Use the Texas Instruments qualification and automotive-support documentation before treating it as an automotive-grade device.
Where can I buy TAS5611APHD online?
Use the Request a Quote form on this page to request TAS5611APHD pricing, current inventory, minimum order quantity, and delivery information. The form allows the exact Texas Instruments orderable code TAS5611APHD to be quoted without confusing it with TAS5611APHDR or another package variant. Current commercial terms should be confirmed through the quote response because availability and lead time can change.
What is the lead time for TAS5611APHD?
The current lead time for TAS5611APHD should be requested through the Request a Quote form on this page. The manufacturer identifies TAS5611APHD as an orderable 64-pin PHD device, but a manufacturing schedule, authorized-channel position, and confirmed quantity are required to state a reliable delivery date. Include prototype, production, and annual-volume requirements in the request so the returned schedule reflects the intended build.
Is TAS5611APHD in stock?
Request a live TAS5611APHD stock confirmation through the Request a Quote form on this page. The exact orderable code, target quantity, and required ship date should be included in the request. Because this amplifier is a high-power package with multiple valid orderable suffixes, distributors should check TAS5611APHD specifically rather than substituting TAS5611APHDR without confirming the packaging requirement.
What is the best drop-in replacement for TAS5611APHD?
TAS5611PHD is the closest same-package replacement candidate because it is listed as a 64-pin HTQFP Class-D amplifier in the comparison results, while retaining the 125 W stereo and 250 W mono architecture. A replacement should still be checked for analog-input polarity, feedback topology, control-interface behavior, thermal-pad layout, and production firmware expectations. No automatically interchangeable part should be approved without a board-level comparison against the manufacturer datasheet.
What can replace TAS5611APHD?
TAS5611PHD is a primary replacement candidate for TAS5611APHD because the comparison results identify both as 64-pin HTQFP PurePath HD Class-D power stages for high-power speaker drive. TAS5612PHDR and TAS5612APHDR are nearby 64-HTQFP alternatives that require closer pin-function review. Check power-supply limits, input routing, feedback connections, switching behavior, and thermal performance before treating any candidate as a drop-in substitution.
Is TAS5611PHD the same as TAS5611APHD?
TAS5611PHD and TAS5611APHD are closely related Texas Instruments Class-D power-stage options, but they are not automatically identical in every ordering or design attribute. The comparison results describe TAS5611PHD as a 64-pin device with differential input and output, while the TAS5611APHD listing specifies the A-family 125 W stereo and 250 W mono configuration. Confirm the complete orderable specification and pin map before interchangeability is approved.
TAS5611APHD vs TAS5612PHDR: which is better for a powered speaker?
TAS5611APHD is the stronger match when the design specifically requires the 125 W stereo and 250 W mono TAS5611A specification. TAS5612PHDR is a nearby 125 W stereo 64-HTQFP Class-D device, but the available comparison snippets do not establish identical feedback, control, or pin behavior. The decision should follow a complete datasheet and PCB comparison, especially when an existing TAS5611APHD layout is being reused.
When should I choose TAS5611APHD instead of TAS5612PHDR?
Choose TAS5611APHD when the power stage has already been designed around the TAS5611A family, including its PurePath HD feedback method, 16 V to 34.1 V supply range, and specified 125 W stereo or 250 W mono operating modes. Choose TAS5612PHDR only after verifying that its input stage, feedback connections, control logic, pinout, and thermal requirements preserve the intended board behavior. A 64-pin package alone does not guarantee drop-in compatibility.
What are the key specifications of TAS5611APHD that engineers should know?
The key TAS5611APHD specifications are 125 W stereo output, 250 W mono output, a 16 V to 34.1 V supply range, analog differential input, differential speaker output, and PurePath HD closed-loop feedback. Texas Instruments packages the amplifier in a 64-pin HTQFP PHD measuring 14 mm by 14 mm and specifies a 0 °C to 70 °C operating range for this orderable part. Maximum load, efficiency, and thermal limits remain application-dependent.
How should a TAS5611APHD audio amplifier board be laid out?
TAS5611APHD requires a low-inductance power and speaker-output layout, adequate thermal-pad copper, and careful separation of sensitive analog input and feedback routing from switching-current paths. Follow the Texas Instruments datasheet and application guidance for the exact power-supply topology, component values, exposed-pad connection, and output filtering. Validate the completed design for thermal rise, EMI, channel-to-channel interaction, and output stability.

工程參考資料,適用於 TAS5611APHD — 比較、設計指引及合規資訊。

選型指南

Choose TAS5611APHD when the design requires a 125 W per-channel stereo or 250 W bridged-mono Class-D power stage, a 16 V to 34.1 V supply, analog differential input, and the TAS5611A PurePath HD feedback architecture. TAS5611APHDR offers the closest electrical match when its ordering suffix and shipping form fit the BOM, while TAS5611PHD is useful for legacy compatibility after checking its supply and load limits. Consider TAS5612PHD or TAS5612PHDR only when a complete pin, feedback, control, and electrical comparison demonstrates board-level equivalence. For a new design, prioritize the exact load rating, thermal feasibility, EMI requirements, and verified pin assignments over headline power alone. No replacement should be approved solely because it uses a 64-pin HTQFP package.

與替代品比較

參數 本產品 TAS5611PHD TAS5611APHDR TAS5612PHD TAS5612PHDR TAS5612APHDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package HTQFP-64 (PHD) HTQFP-64 (PHD) HTQFP-64 (PHD) HTQFP-64 (PHD) HTQFP-64 (PHD) HTQFP-64 (PHD)
Amplifier Class Class D Class D Class D Class D Class D Class D

主要差異化特點

  • Supports both high-power stereo and bridged mono operation (對比TAS5612PHDR)
  • Uses the specified TAS5611A 16 V to 34.1 V operating range (對比TAS5611PHD)
  • Matches the 64-pin HTQFP power-stage package (對比TAS5612APHDR)
  • Provides 4-to-8 ohm speaker-load positioning (對比TAS5611PHD)

設計說明

Treat the exposed thermal pad as the primary thermal path for the 125 W stereo or 250 W mono power stage. Provide uninterrupted top and bottom copper beneath the package, use the manufacturer-recommended thermal-via pattern, and minimize thermal impedance between the die and the enclosure. Validate the hottest amplifier location at maximum continuous output, highest ambient temperature, worst-case supply voltage, and minimum speaker impedance.

Keep the Class-D output-current loop as small and compact as possible. Connect power decoupling directly to the relevant supply and ground pins, use very low-ESR capacitors at the package, and route speaker outputs away from the analog input and feedback traces. The exposed-pad connection, output filter, supply components, and test points must follow the Texas Instruments reference layout to control EMI and preserve stability.

Do not interpret the 125 W stereo and 250 W mono ratings as unconditional speaker capability. The supported load, supply headroom, PCB thermal resistance, output filtering, and protection scheme affect usable power. Before substituting another 64-pin device, compare every power, ground, analog-input, feedback, control, and exposed-pad connection; matching the package outline and nominal wattage alone does not establish drop-in behavior.

Use the manufacturer-recommended output filter and place it close to the amplifier outputs to limit switching-edge energy reaching the speakers and cable harness. Maintain a continuous return reference for high-current paths, avoid long analog traces parallel to output conductors, and confirm compliance with the target EMC standard using the finished enclosure and cable configuration. Thermal design and EMI filtering often compete for board area, so resolve both during layout planning.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information confirms the package, power ratings, supply range, PurePath HD architecture, and 0 °C to 70 °C operating range. Compliance declarations and automotive qualification status must be confirmed on the manufacturer product page or declaration before production release.

相關搜尋

TAS5611APHD datasheet TAS5611APHD datasheet pdf TAS5611APHD pinout TAS5611APHD equivalent TAS5611APHD replacement TAS5611APHD cross reference TAS5611APHD vs TAS5612PHDR TAS5611APHD footprint TAS5611APHD price TAS5611APHD stock Texas Instruments TAS5611APHD TAS5611APHD 125W stereo amplifier TAS5611APHD 64 HTQFP TAS5611APHD powered speaker application

相關元件與詞彙

Texas Instruments TAS5611APHD TAS5611A TAS5611PHD TAS5611APHDR TAS5612PHD TAS5612PHDR TAS5612APHDR Class-D amplifier audio power amplifier analog-input power stage PurePath HD closed-loop feedback differential analog input differential speaker output HTQFP-64 PHD package surface mount power management IC semiconductor 25 V to 34.1 V class supply 4 ohm speaker 8 ohm speaker automotive audio thermal management
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情