TAS5611APHD - 125W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5611APHD ✓ ActiveTAS5611APHD Overview
A Class-D audio amplifier is a switching power stage that delivers high audio output power with substantially greater efficiency than a traditional linear amplifier. The TAS5611A family combines a differential analog input, a Class-D output stage, and integrated closed-loop feedback. This places it in the audio amplifier hierarchy alongside stereo power amplifiers, speaker drivers, and power-management ICs used in home audio, automotive, and industrial systems.
Key features include configurable mono or stereo operation, 125 W per channel in stereo mode, 250 W in mono mode, and an operating supply range of 16 V to 34.1 V. PurePath HD feedback is intended to improve distortion and frequency-response performance in the power stage. The device accepts an analog input and provides a differential speaker output, allowing direct integration into powered speakers and multi-channel audio systems.
The PHD package is a 64-pin HTQFP with an exposed thermal pad. Its high-output topology makes thermal management and PCB copper layout critical: power-stage losses must be transferred through the package and board rather than treated as only an IC-level concern. The manufacturer product page lists the operating temperature as 0 °C to 70 °C for this orderable part. Exact feedback, modulation, efficiency, and thermal values should be confirmed against the manufacturer datasheet before a production design is released.
Typical applications include powered bookshelf speakers, compact home-theater amplifiers, professional audio equipment, soundbars, and automotive-style audio modules. Stereo operation uses the device as a dual-channel 125 W amplifier, while bridged mono operation combines the channels for up to 250 W into one speaker. The wide 16 V to 34.1 V supply range suits systems using a nominal 24 V automotive or industrial bus after appropriate regulation and protection.
A critical design requirement is to provide the datasheet-recommended power and ground layout, use a low-inductance speaker-output path, and connect the exposed thermal pad to an adequate copper area. The analog input and feedback network also require careful grounding to prevent channel interaction. Validate peak thermal conditions and speaker impedance at the maximum intended output power.
This product guide combines the exact orderable-part characteristics, package details, application guidance, replacement considerations, and practical layout checks needed to evaluate the TAS5611APHD as a high-power Class-D audio solution.
Drop-in alternatives for TAS5611APHD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with TAS5611APHD (same form factor and footprint) — differing in Product Type.
TAS5611PHD
✅ Drop-InContact for price
View Datasheet →TAS5611APHDR
✅ Drop-In📋 Reference alternative (not in catalog)
TAS5612PHD
✅ Drop-InContact for price
View Datasheet →TAS5612PHDR
✅ Drop-In📋 Reference alternative (not in catalog)
TAS5612APHDR
✅ Drop-In📋 Reference alternative (not in catalog)
TAS5611APHD Maximum Ratings & Electrical Characteristics
| Product Type | Analog-input Class-D audio power amplifier |
| Amplifier Configuration | 1-channel mono or 2-channel stereo |
| Maximum Stereo Output Power | 125 W |
| Maximum Mono Output Power | 250 W |
| Supply Voltage Range | 16 V to 34.1 V |
| Feedback Technology | PurePath HD integrated closed-loop feedback |
| Input Signal Type | Analog differential input |
| Output Signal Type | Differential speaker output |
| Package | HTQFP-64 (PHD), 14 mm x 14 mm |
| Pin Count | 64 pins |
| Exposed Thermal Pad | Present |
| Operating Temperature | 0 °C to 70 °C |
| Mounting Type | Surface mount |
TAS5611APHD htqfp-64 (phd), 14 mm x 14 mm Pin Configuration Guide
Pin configuration for TAS5611APHD (htqfp-64 (phd), 14 mm x 14 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for TAS5611APHD.
Refer to the datasheet for full pin configuration.
Typical Applications
TAS5611APHD is suitable for 6 applications: Powered Bookshelf Speakers, Home Theater Amplifier, Automotive Audio Power Module, Professional Speaker Amplifier, Soundbar Subwoofer Amplifier, Industrial Audio System.
Powered Bookshelf Speakers
TAS5611APHD fits a powered bookshelf speaker because it delivers up to 125 W per channel in stereo mode and accepts a differential analog input from a preamplifier or digital-to-analog converter. The 16 V to 34.1 V supply range supports higher-voltage amplifier modules without an extremely low rail requirement. Its PurePath HD closed-loop feedback is intended to maintain low distortion across the power stage. The principal design constraint is thermal management: the 64-pin HTQFP exposes a thermal pad, so substantial PCB copper and careful high-current routing are needed to sustain high output power.
Recommended
Home Theater Amplifier
The TAS5611APHD can implement a compact high-power stereo amplification channel for a home-theater receiver or active soundbar. Its 125 W stereo rating provides substantial headroom for typical monitor speakers, while analog input allows direct integration with a conventional audio signal chain. The 250 W mono capability can also support a bridged subwoofer or other single-channel high-power output. Designers should follow the manufacturer power-stage layout guidance, preserve short speaker-current paths, and verify amplifier stability, thermal rise, and protection behavior with the intended speaker impedance.
Recommended
Automotive Audio Power Module
TAS5611APHD is architecturally suitable for a 24 V-class vehicle audio power module because its stated 16 V to 34.1 V supply range covers the nominal automotive battery rail. The 125 W stereo configuration can drive multiple high-efficiency speakers, while the high-power output stage reduces the need for separate discrete speaker drivers. Production automotive use still requires confirmation of qualification, temperature grade, transient protection, and load-dump strategy. The listed 0 °C to 70 °C operating range and unconfirmed AEC-Q100 status mean the device should not be treated as automatically automotive-qualified.
Recommended
Professional Speaker Amplifier
The TAS5611APHD can serve as the output stage in a professional powered-speaker amplifier, particularly where analog input and high continuous power are required. Its 125 W per-channel stereo capability and 250 W bridged mono mode cover common passive-speaker power ranges. Closed-loop PurePath HD feedback is intended to improve linearity relative to conventional open-loop Class-D implementations. Because power capability depends on thermal design, supply impedance, output filtering, and speaker loading, production hardware should be evaluated with the exact enclosure, PCB, load, and thermal boundary rather than relying only on the headline wattage.
Recommended
Soundbar Subwoofer Amplifier
TAS5611APHD is suitable for a soundbar or compact subwoofer module requiring substantial analog-input power from a 16 V to 34.1 V supply. In bridged mono mode, its 250 W capability targets a high-efficiency woofer, while stereo mode can support passive soundbar channels or a two-channel subwoofer arrangement. The large exposed thermal pad makes board copper essential for sustained output. Keep the analog input and feedback network away from the switching and speaker-return paths, and use the manufacturer-recommended output network to minimize EMI and maintain stable operation.
Recommended
Industrial Audio System
TAS5611APHD can provide high-power analog audio amplification in an industrial announcement, intercom, or installation-speaker system operating from a regulated 24 V rail. The device supports either two 125 W channels or one 250 W bridged output, giving designers flexibility in channel count and load configuration. Industrial systems commonly require EMI control and dependable thermal performance, making the exposed-pad copper and low-inductance output routing essential. Confirm the supported speaker impedance, input coupling, fault protection, and operating-temperature requirements against the complete manufacturer datasheet before production release.
Recommended
Recommended Products Summary
Engineering reference data for TAS5611APHD — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | TAS5611PHD | TAS5611APHDR | TAS5612PHD | TAS5612PHDR | TAS5612APHDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | HTQFP-64 (PHD) | HTQFP-64 (PHD) | HTQFP-64 (PHD) | HTQFP-64 (PHD) | HTQFP-64 (PHD) | HTQFP-64 (PHD) |
| Amplifier Class | Class D | Class D | Class D | Class D | Class D | Class D |
Key Differentiators
- Supports both high-power stereo and bridged mono operation (vs TAS5612PHDR)
- Uses the specified TAS5611A 16 V to 34.1 V operating range (vs TAS5611PHD)
- Matches the 64-pin HTQFP power-stage package (vs TAS5612APHDR)
- Provides 4-to-8 ohm speaker-load positioning (vs TAS5611PHD)
Design Notes
Treat the exposed thermal pad as the primary thermal path for the 125 W stereo or 250 W mono power stage. Provide uninterrupted top and bottom copper beneath the package, use the manufacturer-recommended thermal-via pattern, and minimize thermal impedance between the die and the enclosure. Validate the hottest amplifier location at maximum continuous output, highest ambient temperature, worst-case supply voltage, and minimum speaker impedance.
Keep the Class-D output-current loop as small and compact as possible. Connect power decoupling directly to the relevant supply and ground pins, use very low-ESR capacitors at the package, and route speaker outputs away from the analog input and feedback traces. The exposed-pad connection, output filter, supply components, and test points must follow the Texas Instruments reference layout to control EMI and preserve stability.
Do not interpret the 125 W stereo and 250 W mono ratings as unconditional speaker capability. The supported load, supply headroom, PCB thermal resistance, output filtering, and protection scheme affect usable power. Before substituting another 64-pin device, compare every power, ground, analog-input, feedback, control, and exposed-pad connection; matching the package outline and nominal wattage alone does not establish drop-in behavior.
Use the manufacturer-recommended output filter and place it close to the amplifier outputs to limit switching-edge energy reaching the speakers and cable harness. Maintain a continuous return reference for high-current paths, avoid long analog traces parallel to output conductors, and confirm compliance with the target EMC standard using the finished enclosure and cable configuration. Thermal design and EMI filtering often compete for board area, so resolve both during layout planning.
Compliance Information
The available product information confirms the package, power ratings, supply range, PurePath HD architecture, and 0 °C to 70 °C operating range. Compliance declarations and automotive qualification status must be confirmed on the manufacturer product page or declaration before production release.