Texas Instruments

TCA9509RVHR - 2-Bit I2C Level Translator | Texas Instruments

MPN: TCA9509RVHR ✓ 啟用中
5.5 V Vdss 1 mA Id X2QFN-8 (RVH) Package 400 kHz Speed
MOQ: 1 |

TCA9509RVHR 概覽

The Texas Instruments TCA9509RVHR is a 2-bit level-translating I2C/SMBus buffer and repeater operating up to 400 kHz, with an internal 1 mA pull-up current source and an 8-pin X2QFN package measuring 1.6 mm by 1.6 mm. It is designed to isolate voltage domains while preserving bidirectional bus communication.

An I2C level translator is an interface IC that connects logic operating at different voltage levels on the same serial bus. Its position in the hierarchy is I2C repeater, level translator, interface IC, and ultimately semiconductor. This bidirectional separation helps prevent low-voltage devices from receiving signals that exceed their input limits and helps keep high-voltage devices from exposing low-voltage nodes to excessive voltage.

The principal features are two independently level-translated bus channels, operation up to 400 kHz, an internal 1 mA current source, and support for both I2C and SMBus signaling. The small X2QFN package supports compact PCB layouts where board area is constrained. Its buffer function can also isolate capacitive loading between bus segments and improve signal integrity in multi-board or multi-device systems.

The B-side drivers use SMBus-compatible I/O levels, while the A-side uses current sensing to identify LOW states and avoid bus lock-up. The A-side includes the internal 1 mA current source for pull-up support. This arrangement accommodates smaller LOW-state voltage swings while retaining bidirectional data transfer, which is important when connecting peripherals with different supply voltages.

Typical applications include voltage-level translation between low-voltage sensors and higher-voltage controllers, SMBus management interfaces, compact industrial modules, embedded instrumentation, and systems that divide a long I2C bus into shorter electrically isolated segments. The device is particularly useful when cables, connectors, or PCB routing introduce capacitance between bus nodes.

When laying out the circuit, treat the A-side and B-side pull-up networks as separate domains and confirm that the external pull-up strength works with the intended bus voltage and capacitance. Avoid adding unnecessary capacitance near the small package, and verify signal rise times at the maximum intended I2C clock rate. Bus timing and voltage margins remain the responsibility of the final board design.

This page combines the manufacturer product information, ordering data, documented cross-reference details, packaging characteristics, and practical design guidance in one engineering-focused view. It also distinguishes true pin-compatible interchange from merely similar I2C switching devices, helping designers make a replacement decision without assuming that equal functionality guarantees equal footprint or pin behavior.

直接替換替代品,適用於 TCA9509RVHR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TCA9509RVHR (相同外形與佔位).

TCA9509MRVHR

✅ 直接替換
📦 X2QFN-8 (RVH)
Electrical ratings, pinout, and 400 kHz performance are identical; manufacturing-site lead finish differs and carrier orientation changes, producing a 100% functional parameter match

📋 參考替代品(不在目錄中)

TCA9509RVHR 規格

Product Type 2-bit level-translating I2C/SMBus buffer and repeater
Number of Bus Channels 2 bits
Maximum Bus Clock Frequency 400 kHz
Internal Pull-Up Current Source 1 mA
Supported Interfaces I2C and SMBus
Maximum Supply Voltage 5.5 V
A-Side Architecture Current-sensing LOW detection with 1 mA pull-up current source
B-Side Driver Levels SMBus-compatible I/O levels
Package Type X2QFN-8 (RVH)
Package Dimensions 1.6 mm x 1.6 mm
腳位數 8 pins
安裝類型 Surface mount

TCA9509RVHR 1.6 mm x 1.6 mm 腳位配置指南

TCA9509RVHR(1.6 mm x 1.6 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TCA9509RVHR 的 1.6 mm x 1.6 mm 封裝腳位圖

無詳細腳位定義資料: TCA9509RVHR.

請參閱 資料表 以查看完整腳位配置。

典型應用

TCA9509RVHR 適用於 6 應用s: Low-Voltage Sensor Level Translation, SMBus Management Interface, Embedded Instrumentation, Multi-Board I2C Isolation, Industrial Control Module, Low-Power Sensor Node.

🧩

Low-Voltage Sensor Level Translation

The TCA9509RVHR fits between a low-voltage sensor and a controller operating at a higher logic level because its bidirectional A-side and B-side paths support two independently translated bus bits. Texas Instruments identifies the device for I2C/SMBus communication up to 400 kHz and includes an internal 1 mA current source on the A-side. This arrangement helps protect lower-voltage devices from excessive input voltage while retaining standard two-wire addressing and data transfer. External pull-ups should be sized for each supply domain and checked against the bus capacitance before operating near the 400 kHz limit.

🏭

SMBus Management Interface

The TCA9509RVHR is appropriate for an SMBus management segment because its B-side drivers use SMBus-compatible I/O levels and its A-side detects LOW states through current sensing. The two-bit repeater can connect management devices operating at different supply voltages without changing the host's bus protocol. Texas Instruments specifies operation up to 400 kHz, which supports standard I2C/SMBus management traffic while allowing separate pull-up networks for each voltage domain. Verify the available pull-up current, rise time, and bus capacitance in the final topology.

🔧

Embedded Instrumentation

The TCA9509RVHR can isolate a compact measurement peripheral from a controller when their digital interfaces use different logic voltages. The 8-pin 1.6 mm by 1.6 mm X2QFN package preserves PCB area in dense instrumentation, while the two translated channels support bidirectional register reads and writes. Its 400 kHz maximum bus rate is sufficient for many control and configuration registers rather than high-volume streaming. Place the repeater near the voltage-domain boundary and keep the pull-up network close to the associated bus segment to maintain predictable signal behavior.

🌐

Multi-Board I2C Isolation

The TCA9509RVHR is useful at a boundary between circuit boards or cable-connected modules that use different logic voltages. Repetition reduces the electrical loading presented by one bus segment to another while providing bidirectional level translation for both data and clock lines. With operation up to 400 kHz and a compact 8-pin X2QFN package, it can support conventional I2C management links without substantial board area. The resulting bus must still meet rise-time and capacitance limits, particularly when long cables or multiple pull-ups increase loading.

🏭

Industrial Control Module

The TCA9509RVHR supports industrial control modules that combine low-voltage sensors with a higher-voltage controller or communications processor. The device translates two bidirectional I2C/SMBus lines while allowing the two sides to use their respective logic thresholds. Its 1 mA internal current source supports the A-side pull-up arrangement, and the 400 kHz capability covers typical configuration and command traffic. In a compact controller board, the 1.6 mm by 1.6 mm X2QFN package reduces routing congestion, although external pull-up selection remains essential for reliable LOW and rise-time behavior.

📱

Low-Power Sensor Node

The TCA9509RVHR fits between a low-power sensor node and a host running at another supply voltage when the interface must retain standard I2C behavior. Its bidirectional 2-bit architecture handles both clock and data lines, while the current-sensing A-side helps detect LOW without relying only on a fixed voltage threshold. The package occupies only 1.6 mm by 1.6 mm, which is valuable in wearable or space-constrained sensor designs. Confirm static current and voltage thresholds against the sensor's power budget, and use pull-ups that preserve acceptable rise time without adding excessive continuous current.

推薦產品摘要

TCA9509MRVHR Pin-compatible level-translating repeater with identical electrical behavior 用於: Low-Voltage Sensor Level Translation, SMBus Management Interface, Embedded Instrumentation, Multi-Board I2C Isolation, Industrial Control Module, Low-Power Sensor Node TCA9509 Parent product family for 2-bit I2C/SMBus level translation 用於: Low-Voltage Sensor Level Translation, SMBus Management Interface, Embedded Instrumentation, Multi-Board I2C Isolation, Industrial Control Module, Low-Power Sensor Node
What is the TCA9509RVHR?
The TCA9509RVHR is a 2-bit bidirectional level-translating I2C/SMBus buffer and repeater from Texas Instruments. According to the manufacturer product page, it operates up to 400 kHz, includes an internal 1 mA current source, and is packaged in an 8-pin X2QFN package measuring 1.6 mm by 1.6 mm. It is intended for connecting serial-bus devices that operate at different logic voltages while preserving two-wire bidirectional communication.
What voltage range does TCA9509RVHR support?
The TCA9509RVHR supports operation up to a maximum supply voltage of 5.5 V. The manufacturer identifies the device as a level-translating I2C/SMBus buffer with separate A-side and B-side interfaces, allowing devices using different logic levels to communicate. Consult the manufacturer datasheet pin and parameter tables before setting the exact voltage applied to either side, particularly when using pull-up networks above the device's specified operating range.
Where can I download the TCA9509RVHR datasheet PDF?
The official TCA9509 datasheet can be downloaded from the Texas Instruments product-information link at https://www.ti.com/lit/gpn/tca9509. The same document contains the ordering information, electrical characteristics, application description, pin configuration, and functional diagrams for the RVH package. Use the manufacturer document when assigning pin names or confirming operating limits because third-party copies may not reflect the latest production revision.
Where is the TCA9509RVHR pinout?
The TCA9509RVHR pin configuration is documented in the pin-configuration and pin-functions sections of the official Texas Instruments TCA9509 datasheet. The component uses an 8-pin X2QFN package designated RVH, but the exact terminal numbering and exposed-pad treatment should be taken directly from that document. Do not infer the footprint from a generic QFN drawing, since the RVH package is a specific 1.6 mm by 1.6 mm X2QFN configuration.
How fast is the TCA9509RVHR I2C bus repeater?
The TCA9509RVHR supports I2C and SMBus operation up to 400 kHz, according to the Texas Instruments product page. The operating limit applies to the translated bus signal and should be checked against cable length, bus capacitance, pull-up resistance, and rise-time requirements in the completed board. A nominal 400 kHz capable device does not guarantee 400 kHz operation in every physical bus implementation.
What is the difference between TCA9509RVHR and TCA9509MRVHR?
The TCA9509RVHR and TCA9509MRVHR are functionally identical devices produced on the same manufacturing line, with the distinction involving manufacturing-site lead finish and carrier orientation rather than electrical behavior. Texas Instruments support guidance states that one site uses NiPdAuAg finish while the other uses NiPdAu, and the tape orientation differs. Both use the same RVH package, so the existing footprint remains applicable during substitution.
Can TCA9509MRVHR replace TCA9509RVHR?
The TCA9509MRVHR can serve as a pin-compatible replacement for the TCA9509RVHR because Texas Instruments states that both devices come from the same manufacturing line and are electrically identical. The principal differences are manufacturing-site lead finish and tape orientation. Verify the orientation of the tape-and-reel presentation against the assembly process before production release, even though the electrical function and RVH package are unchanged.
When should I choose TCA9509RVHR over a generic I2C mux?
Choose the TCA9509RVHR when the design needs bidirectional level translation between two bus voltage domains rather than independent routing of multiple downstream devices. Its 2-bit repeater architecture supports up to 400 kHz operation and includes an internal 1 mA current source. A multiplexer addresses device selection and may also integrate level translation, so it is preferable only when the primary requirement is bus segmentation rather than voltage-domain isolation.
Is the PCA9509GM,125 a drop-in replacement for TCA9509RVHR?
The PCA9509GM,125 is a similar NXP I2C buffer device, but it is not listed as a verified pin-to-pin, same-package replacement for the TCA9509RVHR in the available cross-reference information. The TCA9509RVHR uses the 8-pin RVH X2QFN package, so any proposed substitution must match both its footprint and pin functions. Treat the PCA9509GM,125 as a functional comparison until its package and terminal assignments are confirmed directly.
What is the best Texas Instruments equivalent for TCA9509RVHR?
The best documented Texas Instruments equivalent is the TCA9509MRVHR, which Texas Instruments describes as electrically identical to the TCA9509RVHR and manufactured on the same line. Both use the RVH package and differ principally in manufacturing-site finish and carrier orientation. No other Texas Instruments part was documented as a same-package, pin-compatible substitute in the available manufacturer and cross-reference information.
How does TCA9509RVHR support SMBus level translation?
The TCA9509RVHR uses SMBus-compatible I/O levels for its B-side drivers and a current-sensing mechanism on the A-side to detect LOW states. Texas Instruments states that this arrangement prevents bus lock-up and permits the A-side LOW voltage to accommodate smaller signal swings. The result is bidirectional translation between compatible I2C/SMBus voltage domains while retaining the open-drain behavior required by these serial buses.
Does TCA9509RVHR need external pull-up resistors?
The TCA9509RVHR includes an internal 1 mA current source for A-side pull-up support, but external resistors may still be required to establish the correct bus voltage and rise time. Pull-up selection depends on supply voltage, bus capacitance, cable length, and the devices attached to each segment. Confirm the resulting rise time at 400 kHz and ensure that the external pull-up network does not conflict with the device's current-source behavior.
Where can I buy TCA9509RVHR and check its stock?
Use the Request a Quote form on this page to request current TCA9509RVHR availability, unit pricing, and lead time. The form allows the exact orderable MPN TCA9509RVHR and requested quantity to be reviewed for fulfillment. Current stock and lead time should be confirmed through that channel because inventory and pricing can change independently of the product documentation.
What is the price of TCA9509RVHR?
The current unit price and volume tiers for TCA9509RVHR should be requested through the Request a Quote form on this page. The quote request preserves the exact MPN and can account for the required quantity and production volume. This approach avoids presenting a stale catalog figure as a current market price and allows the order quantity to be matched to available inventory.
What are the key specifications of TCA9509RVHR?
The key TCA9509RVHR specifications are a 2-bit translating bus, operation up to 400 kHz, an internal 1 mA current source, I2C/SMBus support, a maximum supply voltage of 5.5 V, and an 8-pin X2QFN package measuring 1.6 mm by 1.6 mm. Texas Instruments also identifies the A-side as current-sensing and the B-side drivers as SMBus-compatible, which are important architectural details for level-domain and bus-segment design.

工程參考資料,適用於 TCA9509RVHR — 比較、設計指引及合規資訊。

選型指南

Choose the TCA9509RVHR when the design requires a compact, bidirectional two-bit I2C/SMBus level translator with operation up to 400 kHz and an integrated 1 mA A-side current source. Choose the TCA9509MRVHR when manufacturing-site finish or carrier orientation better suits the assembly flow; Texas Instruments describes it as electrically identical on the same production line. A generic I2C mux is preferable only when the main requirement is routing one bus to multiple downstream devices rather than translating between two voltage domains. The PCA9509GM,125 may serve a similar functional role, but it should not be approved as a drop-in substitute until its package and terminal assignments are confirmed against the RVH footprint. For every choice, validate pull-up strength, LOW-level voltage, bus capacitance, and rise time in the final wiring rather than judging compatibility from the bus frequency alone.

與替代品比較

參數 本產品 TCA9509MRVHR
Package X2QFN-8 (RVH), 1.6 mm x 1.6 mm X2QFN-8 (RVH), 1.6 mm x 1.6 mm
Brand Texas Instruments Texas Instruments
Product Function 2-bit level-translating I2C/SMBus buffer and repeater 2-bit level-translating I2C/SMBus buffer and repeater
Maximum Bus Frequency 400 kHz 400 kHz
Internal Current Source 1 mA 1 mA
Maximum Supply Voltage 5.5 V 5.5 V
B-Side Driver Levels SMBus-compatible I/O levels SMBus-compatible I/O levels
Manufacturing Difference NiPdAuAg or NiPdAu manufacturing-site finish NiPdAuAg manufacturing-site finish; carrier orientation differs
Functional Equivalence Reference device Electrically identical and produced on the same manufacturing line

主要差異化特點

  • Documented electrical equivalence with an available same-package substitute (對比TCA9509MRVHR)
  • Integrated bidirectional level translation (對比PCA9509GM,125)
  • Compact placement for space-constrained interface routing (對比Larger-package I2C switches)

設計說明

Treat the A-side and B-side as separate voltage domains when assigning pull-up resistors and bypassing components. Place each pull-up network close to the devices that share its bus domain, and place local supply decoupling near the TCA9509RVHR power pins. Keep the routing between the repeater and the two bus segments short enough to control capacitance, especially when the design approaches the 400 kHz operating limit.

Do not assume that the internal 1 mA current source eliminates the need to validate pull-up strength. The external pull-up must establish the intended voltage-domain logic levels and provide an acceptable rising edge under the actual bus capacitance. Confirm both LOW-level voltage and rise time at the longest intended cable length; otherwise communication can fail intermittently even though each individual component passes a short bench test.

Use the exact RVH land pattern and exposed-pad requirements from the manufacturer package drawing. Avoid placing test points or unrelated copper structures beneath the device unless the package drawing permits it. Preserve short return paths for both logic domains, and avoid routing the sensitive A-side and B-side nets parallel to high-current switching paths. Controlled creepage and clearance also remain important if the two domains use widely separated voltages.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

One manufacturing-site finish is identified as NiPdAuAg, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the cited product information.

相關搜尋

TCA9509RVHR datasheet TCA9509RVHR pinout TCA9509RVHR datasheet pdf TCA9509RVHR equivalent TCA9509RVHR replacement TCA9509RVHR price TCA9509RVHR stock Texas Instruments TCA9509RVHR TCA9509 400kHz level translator TCA9509 X2QFN-8 pinout TCA9509 I2C level shifting TCA9509RVHR vs TCA9509MRVHR

相關元件與詞彙

Texas Instruments TCA9509RVHR TCA9509MRVHR TCA9509 PCA9509GM,125 NXP Semiconductors I2C SMBus level translator bus repeater interface IC semiconductor bidirectional buffer current sensing SMBus-compatible I/O levels open-drain bus 400 kHz bus rate 1 mA current source 5.5 V maximum supply voltage X2QFN-8 RVH package QFN family surface-mount package bus isolation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情