Texas Instruments

THS7303PW - 3-Channel Low-Power Video Amplifier | TI

MPN: THS7303PW ✗ 停產
2.7 V to 5 V Vdss 18.9 mA Id 20-pin TSSOP (PW) Package
MOQ: 1 |

THS7303PW 概覽

The Texas Instruments THS7303PW is a three-channel, low-power video amplifier with I2C control, selectable filters, 6 dB gain, SAG correction, a 2:1 input multiplexer, and selectable input bias modes. It operates from a single 2.7 V to 5 V supply and is packaged in a 20-pin TSSOP (PW). The device also features a 190 MHz bandwidth and a 320 V/µs slew rate, making it suited to high-speed video signal processing.

A video amplifier is an analog signal-conditioning IC that increases the amplitude and drive capability of composite, component, or other video signals. It belongs to the broader hierarchy of amplifier ICs, analog integrated circuits, and signal-chain semiconductors. The THS7303PW combines three buffered video channels with programmable control, allowing a compact design to select filtering, gain, multiplexer routing, and bias behavior without replacing multiple fixed-function devices.

Its principal features include three integrated video amplifiers, a 2:1 input multiplexer, a selectable 6 dB gain setting, selectable low-pass filters, SAG correction, and an I2C interface. These functions support programmable video paths in set-top boxes, video processors, display equipment, surveillance systems, and general-purpose analog-to-digital signal-processing circuits. Low power consumption is particularly useful when three active video channels must operate continuously in compact commercial or industrial equipment.

The THS7303PW uses a complementary silicon-germanium BiCom-III process according to the manufacturer documentation. Its approximately 190 MHz small-signal bandwidth and 320 V/µs slew rate provide ample speed for high-frequency video signals. The 2.1:1 power-supply current and 6 mA quiescent current reported in the device documentation describe a low-power design intended to balance drive strength, integration, and heat management in a surface-mount package.

Typical uses include conditioning composite video for digitization, buffering multiple video outputs, switching between two input sources with a 2:1 multiplexer, and applying programmable filter or gain settings in display and broadcast equipment. The I2C control interface also enables software-controlled configuration of multiple channels in systems where the video path changes during operation.

PCB design should preserve the short, controlled return paths needed by high-speed analog signals. Place input and output bypass capacitors close to the relevant supply and ground pins, keep video traces away from switching nodes and digital control lines, and follow the pin descriptions and layout guidance in the manufacturer datasheet. Bus pull-up resistors and series damping should be selected to keep SCL and SDA waveforms within valid limits.

This page organizes the THS7303PW’s functions, pin-compatible replacement information, comparison parameters, application guidance, and practical design considerations. It supports faster component evaluation by placing the device’s key architectural features alongside the engineering checks required for reliable video-signal implementation.

直接替換替代品,適用於 THS7303PW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

THS7303PWG4

✅ 直接替換
📦 20-pin TSSOP (PW)
Same three-channel configuration and 190 MHz bandwidth, with no measurable primary-parameter difference reported; lifecycle and qualification markings require review.

📋 參考替代品(不在目錄中)

THS7303PW 最大額定值與電氣特性

Number of Channels 3 channels
Device Type 3-channel low-power video amplifier with 2:1 input multiplexer
Supply Voltage Range 2.7 V to 5 V
Small-Signal Bandwidth 190 MHz at -3 dB
Slew Rate 320 V/µs
供應電流 18.9 mA
靜態電流 6 mA
Gain Options Selectable 6 dB gain
Input Multiplexer Ratio 2:1
Control Interface I2C
Filter Configuration Selectable filters
Video Correction SAG correction
Input Bias Selectable input bias modes
輸出類型 Rail-to-rail
Process Technology Complementary silicon-germanium BiCom-III
Number of Terminals 20 terminals
封裝 20-pin TSSOP (PW)
Package Form Rectangular gull-wing
Temperature Grade Industrial
安裝類型 Surface mount

THS7303PW rectangular gull-wing 腳位配置指南

THS7303PW(rectangular gull-wing 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

THS7303PW 的 rectangular gull-wing 封裝腳位圖

無詳細腳位定義資料: THS7303PW.

請參閱 資料表 以查看完整腳位配置。

典型應用

THS7303PW 適用於 6 應用s: Composite Video Conditioning, Video Multiplexing, Set-Top Box Video Paths, Security Camera Video Buffering, Display Interface Conditioning, Industrial Video Processing.

📺

Composite Video Conditioning

The THS7303PW is well suited to conditioning composite video before digitization because it combines a 190 MHz small-signal bandwidth, 320 V/µs slew rate, selectable filters, and 6 dB gain in one device. A channel can be configured for the required bandwidth and gain, then drive the input of an ADC or video processor. The 2:1 multiplexer also allows a source selector to share one downstream signal chain. Designers should verify the composite video timing, output loading, synchronization behavior, and input/output voltage limits against the application before production use.

🌐

Video Multiplexing

The THS7303PW can select between two video inputs with its 2:1 multiplexer, reducing the number of external routing components required in compact video systems. Its three amplifier channels allow multiple routed or buffered outputs, while I2C control permits software changes to gain, filters, bias modes, and routing. For a dual-source front end, the device can sit between source buffers and an ADC or display interface. Validate switch timing, channel crosstalk, output settling, and the exact supported I2C configuration sequence in the final signal chain.

📱

Set-Top Box Video Paths

A set-top box can use the THS7303PW to condition several video signals while keeping board area and control complexity manageable. Three integrated channels, a 2.7 V to 5 V single supply, approximately 6 mA quiescent current, and I2C programmability fit low-power consumer equipment. The selectable filters and 6 dB gain provide flexible channel configuration for different source stages. Layout work should keep the high-speed video traces short, place bypass capacitors near the device, and isolate the I2C and video paths from switching regulators.

🎥

Security Camera Video Buffering

The THS7303PW can buffer and condition camera video signals in surveillance systems requiring multiple amplifier stages or programmable source selection. Its 190 MHz bandwidth and 320 V/µs slew rate support high-speed analog video, while the selectable filters, gain, bias modes, and SAG correction allow channel settings to be adapted to different source characteristics. The low-power 2.7 V to 5 V architecture also suits compact camera electronics. Confirm video standard timing, input levels, output drive, channel-to-channel isolation, and temperature performance before deploying the device in a camera housing.

🖥️

Display Interface Conditioning

The THS7303PW is applicable in display interfaces where multiple analog video paths require buffering, gain adjustment, and filtering. The three amplifier channels can be organized for separate source or routing stages, and the 2:1 multiplexer can select between two inputs without duplicating downstream circuitry. Its rail-to-rail output characteristic and programmable configuration support compact interface designs, subject to the exact output-voltage and load limits in the datasheet. PCB planning should reserve a continuous ground reference and minimize stubs beneath the TSSOP footprint.

🏭

Industrial Video Processing

Industrial inspection and machine-vision systems can use the THS7303PW to condition analog video before conversion or analysis. Its configurable filters and 6 dB gain help tailor each channel, while SAG correction addresses signal-amplitude variations that may occur in industrial video paths. The 2:1 multiplexer supports selectable test and production inputs, and the I2C interface permits centralized configuration. For reliable operation, validate settling time, channel synchronization, noise margin, temperature range, and grounding around sensitive analog inputs in the complete machine-vision front end.

推薦產品摘要

THS7303PW Texas Instruments 用於: Composite Video Conditioning, Video Multiplexing, Set-Top Box Video Paths, Security Camera Video Buffering, Display Interface Conditioning, Industrial Video Processing THS7303PWG4 Pin-compatible device in the same THS7303 family 用於: Composite Video Conditioning, Video Multiplexing, Set-Top Box Video Paths, Security Camera Video Buffering, Display Interface Conditioning, Industrial Video Processing
What is the THS7303PW?
The THS7303PW is a three-channel, low-power video amplifier with I2C control, selectable filters, 6 dB gain, SAG correction, a 2:1 input multiplexer, and selectable input bias modes. According to the Texas Instruments product page, the device operates from 2.7 V to 5 V and is offered in a 20-pin TSSOP package, making it suitable for compact programmable video-signal chains.
What are the key specifications of THS7303PW?
The THS7303PW combines three video channels, a 190 MHz -3 dB bandwidth, a 320 V/µs slew rate, and a 2.7 V to 5 V single supply. According to Texas Instruments documentation, the amplifier also provides selectable filters, 6 dB gain, SAG correction, a 2:1 input multiplexer, selectable input bias modes, approximately 6 mA quiescent current, and 18.9 mA supply current.
Where can I download the THS7303PW datasheet PDF?
The THS7303PW datasheet PDF is available from the official Texas Instruments document link for THS7303, with the product page serving as the manufacturer’s main technical resource. It documents the electrical characteristics, pin assignments, I2C register behavior, filter options, application circuit, and package information needed to evaluate and implement the amplifier.
Where is the THS7303PW pinout located?
The THS7303PW pinout is located in the pin-configuration section of the manufacturer datasheet. The device uses a 20-pin TSSOP (PW) package with gull-wing leads and a rectangular body. Use the manufacturer’s pin-description table when assigning supply, ground, video input, video output, I2C, and configuration signals on the PCB.
What is the supply voltage range of THS7303PW?
The THS7303PW operates from 2.7 V to 5 V using a single supply. According to the Texas Instruments product documentation, this range supports low-voltage portable equipment as well as conventional 3.3 V and 5 V video systems. The selected supply must remain within the manufacturer’s operating limits while providing adequate headroom for the video output and configuration logic.
Can THS7303PW be used for video signal conditioning?
Yes, the THS7303PW is designed for video signal conditioning and high-speed analog-to-digital signal-processing applications. Its three channels, 190 MHz bandwidth, 320 V/µs slew rate, programmable 6 dB gain, selectable filters, and SAG correction provide useful conditioning functions ahead of an ADC or downstream video-processing stage.
What can replace the THS7303PW?
THS7303PWG4 is the identified pin-compatible replacement for THS7303PW, with the same 20-pin TSSOP format and equivalent primary performance characteristics. The manufacturer documentation supports the function and package match, but engineers should verify power, status, temperature, and ordering details against their specific production requirements before substitution.
Is THS7303PWG4 the same as THS7303PW?
THS7303PWG4 is functionally equivalent to THS7303PW for most designs and uses the same 20-pin TSSOP package. Comparison information identifies no measurable differences across the primary technical parameters. The two ordering codes still require production review because lifecycle markings, qualification status, and commercial terms can differ.
THS7303PW vs THS7303PWG4: which replacement should I choose?
THS7303PWG4 is the practical drop-in choice when the original THS7303PW is unavailable because it retains the 20-pin TSSOP footprint and equivalent principal performance. According to the manufacturer’s THS7303 documentation, both parts belong to the same three-channel programmable video-amplifier family. Review the current ordering table for lifecycle and qualification details before production release.
When should I choose THS7303PW over a THS7303PWG4 replacement?
Choose THS7303PW only when its exact ordering configuration remains appropriate for the current product revision and supply plan. For an existing 20-pin TSSOP design requiring the three-channel amplifier, I2C control, selectable filters, 6 dB gain, and 2:1 multiplexer functions, THS7303PWG4 provides the closest identified drop-in path when the original is discontinued.
Is THS7303PW suitable for display and broadcast equipment?
The THS7303PW is suitable for programmable video paths in display, broadcast, set-top, and related equipment because it combines three channels with filter, gain, bias, multiplexer, and SAG-correction functions. Its 190 MHz bandwidth and 320 V/µs slew rate also make it appropriate for conditioning signals before digitization. System-level timing, output loading, and video-standard compliance still require validation.
Where can I buy THS7303PW online?
Use the Request a Quote form on this XAIPART page to request THS7303PW availability, current commercial terms, and lot information. Because the THS7303PW is identified as discontinued, current supply can be limited, and a quotation is more appropriate than relying on a static retail listing. Clearly state the required quantity and package variant in the request.
What is the lead time for THS7303PW?
The lead time for THS7303PW depends on remaining factory and authorized-channel inventory because the part is identified as discontinued. Request the current lead time through the Request a Quote form on this XAIPART page. Include your annual usage, forecast horizon, acceptable date code, and inspection requirements so the supplier can confirm a realistic schedule.
Is THS7303PW in stock?
Stock for THS7303PW can change quickly because the device is identified as discontinued. Use the Request a Quote form on this page to confirm current availability and the quantity that can be allocated. Provide a forecast and required delivery date, and ask for lot traceability when obsolescence risk must be controlled.
What is the price of THS7303PW?
The current commercial terms for THS7303PW are obtained through the Request a Quote form on this XAIPART page. Because the component is identified as discontinued, availability, date code, condition, and order quantity can materially affect the quotation. Submit the required quantity and production schedule rather than relying on a historical catalog amount.
What is the best cross-brand equivalent for THS7303PW?
No cross-brand drop-in equivalent was established for THS7303PW. The closest identified replacement is the Texas Instruments THS7303PWG4, which shares the 20-pin TSSOP package and equivalent primary performance. Since functional similarity alone does not guarantee pin compatibility, a cross-brand device should not be substituted without manufacturer-level pinout, register, electrical, and timing verification.

工程參考資料,適用於 THS7303PW — 比較、設計指引及合規資訊。

選型指南

Choose THS7303PW when an existing design specifically identifies that ordering code and its lifecycle, qualification, and sourcing status remain acceptable for the project. Its three channels, 190 MHz bandwidth, 320 V/µs slew rate, 2:1 multiplexer, selectable filters, 6 dB gain, SAG correction, and I2C control make it suitable for programmable video conditioning. Choose THS7303PWG4 when the original part is unavailable and the board requires a same-footprint, same-family replacement; comparison information reports no measurable primary-performance difference. No cross-brand drop-in alternative has been established, so a competitor device should not be assumed interchangeable without complete pin, register, electrical, timing, and application verification. For new designs, also evaluate whether a newer TI video-amplifier family offers improved documentation, lifecycle support, or a better power-versus-performance tradeoff.

與替代品比較

參數 本產品 THS7303PWG4
Package 20-pin TSSOP (PW) 20-pin TSSOP (PW)
Brand Texas Instruments Texas Instruments
Number of Channels 3 channels 3 channels
Small-Signal Bandwidth 190 MHz at -3 dB 190 MHz at -3 dB
Slew Rate 320 V/µs 320 V/µs
Supply Voltage Range 2.7 V to 5 V 2.7 V to 5 V
Supply Current 18.9 mA 18.9 mA
Quiescent Current 6 mA 6 mA
Input Multiplexer 2:1 2:1
Control Interface I2C I2C
Gain Selectable 6 dB Selectable 6 dB
Special Functions Selectable filters, SAG correction, selectable input bias modes Selectable filters, SAG correction, selectable input bias modes

主要差異化特點

  • Three programmable video channels in one package (對比THS7303PWG4)
  • Integrated 2:1 input multiplexing (對比THS7303PWG4)
  • Programmable analog configuration (對比THS7303PWG4)

設計說明

Treat the THS7303PW as a high-speed analog device even though its interface is digital. Place input, output, and bypass connections directly adjacent to their associated pins, maintain a continuous ground reference, and avoid routing SCL or SDA beneath the package. The manufacturer datasheet should control trace geometry, impedance, decoupling, and exposed or adjacent thermal considerations.

Follow the manufacturer’s recommended bypass-capacitor network and place each capacitor on the same side of the PCB as its associated supply pin. Keep the supply return path short and use a quiet source where video signal purity is important. Confirm that the 2.7 V to 5 V operating range includes startup, ripple, and output-voltage conditions across temperature.

Do not treat the 2:1 multiplexer as a general-purpose high-voltage switch or the I2C interface as a high-capacitance bus driver. Check input levels, output loading, channel timing, and register behavior for the exact application. A bus that becomes unstable when the amplifier is connected should be examined for pull-up strength, capacitance, clock stretching, and level compatibility rather than increasing resistance blindly.

Use short video paths and controlled terminations or impedance management appropriate to the source and receiver. Keep switching-regulator paths and high-current return currents away from the video inputs, and provide a direct ground return for each decoupling capacitor. Validate eye quality, ringing, settling, and channel-to-channel skew at the intended clock or video frequency.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The device is identified as an industrial-grade video amplifier. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established.

相關搜尋

THS7303PW datasheet THS7303PW pinout THS7303PW datasheet pdf Texas Instruments THS7303PW THS7303PW 190 MHz video amplifier THS7303PW 20-TSSOP pinout THS7303PW I2C video amplifier THS7303PW equivalent THS7303PW drop-in replacement THS7303PW vs THS7303PWG4 THS7303PW footprint THS7303PW price THS7303PW stock THS7303PW application circuit

相關元件與詞彙

Texas Instruments THS7303PW THS7303PWG4 THS7303 video amplifier analog amplifier amplifier IC integrated circuit semiconductor I2C 2:1 input multiplexer selectable filters 6 dB gain SAG correction selectable input bias modes 190 MHz bandwidth 320 V/µs slew rate 2.7 V to 5 V supply 18.9 mA supply current 6 mA quiescent current rail-to-rail output complementary silicon-germanium BiCom-III process TSSOP-20 TSSOP package family surface mount SMD composite video video signal conditioning set-top box machine vision surveillance camera
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情