TJA1052IT/2518 - Isolated High-Speed CAN Transceiver | NXP
MPN: TJA1052IT/2518 ✓ 啟用中TJA1052IT/2518 概覽
A CAN transceiver is an interface IC within the broader controller-area network communication hierarchy. A CAN protocol controller generates and interprets CAN frames, while the transceiver converts that digital information into electrical signaling on the physical bus. Galvanic isolation adds a barrier between the controller side and bus side, helping protect low-voltage electronics when the two domains operate at different potentials.
The TJA1052i family is specifically designed around automotive isolation requirements. Its principal attributes include high-speed CAN operation, galvanic isolation, a two-wire physical bus interface, and a 16-pin SOIC package. The exact bus data rate, isolation withstand rating, supply-voltage range, loop delay, propagation delay, and temperature limits should be confirmed in the NXP manufacturer datasheet before final qualification.
The isolated architecture is especially useful in electric vehicles and hybrid electric vehicles, where a traction or auxiliary subsystem may be separated from a low-voltage controller by hundreds of volts. Isolation can reduce the need for a separate high-voltage CAN interface and allows a controller operating from a low-voltage rail to communicate with a high-voltage CAN bus. PCB creepage, clearance, capacitor ratings, and isolation-barrier construction remain the dominant layout considerations.
Typical applications include battery-management communications, inverter and motor-control interfaces, vehicle body and comfort controllers, industrial isolation links, and other CAN networks where the controller and bus may sit at substantially different ground potentials. The TJA1052IT/2518 is particularly relevant when an existing design requires a high-speed isolated CAN physical layer in the 16-pin SO footprint.
For implementation, use the manufacturer datasheet pin-description table and isolation-layout guidance rather than inferring connections from package position. Place isolation-barrier components directly across the designated isolation pins, maintain the required creepage and clearance distances, and keep the CAN bus and isolation-side return paths separated from sensitive circuitry.
This product page combines the manufacturer's function description and datasheet link with lifecycle status, engineering application guidance, pinout availability, and drop-in replacement information. It helps engineers distinguish the TJA1052i from non-isolated CAN transceivers and from isolation-oriented alternatives that require different pin or qualification decisions.
直接替換替代品,適用於 TJA1052IT/2518 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TJA1052IT/2518 (相同外形與佔位) — 差異在於 Product Type.
TJA1052IT/5Y
✅ 直接替換📋 參考替代品(不在目錄中)
TJA1052IT/2Y
✅ 直接替換📋 參考替代品(不在目錄中)
ISO1042DW
✅ 直接替換聯絡詢價
查看資料表 →ISO1042-Q1
✅ 直接替換📋 參考替代品(不在目錄中)
TJA1052IT1
✅ 直接替換📋 參考替代品(不在目錄中)
TJA1052IT/2518 規格
| Product Type | Galvanically isolated high-speed CAN transceiver, 1 device |
| Supported Network | Controller Area Network, 1 CAN bus |
| Physical Bus | Two-wire CAN bus, 2 conductors |
| Isolation Function | Galvanic isolation between controller and bus sides, 1 isolation barrier |
| Package Pin Count | 16 pins |
| Package Type | SOIC, 16 pins |
| 安裝類型 | Surface mount |
| Target Application Segment | Electric and hybrid electric vehicles, 2 vehicle architectures |
| Manufacturer Order Code | TJA1052IT/2518, 1 order code |
TJA1052IT/2518 soic, 16 pins 腳位配置指南
TJA1052IT/2518(soic, 16 pins 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TJA1052IT/2518.
請參閱 資料表 以查看完整腳位配置。
典型應用
TJA1052IT/2518 適用於 6 應用s: Electric-Vehicle Battery Management CAN, Hybrid Vehicle Inverter Communication, Traction and Motor-Control CAN Interface, Automotive Body and Comfort Network, Industrial High- and Low-Voltage CAN Link, Charging and Auxiliary Power CAN Network.
Electric-Vehicle Battery Management CAN
The TJA1052IT/2518 fits a battery-management CAN connection where the low-voltage control electronics must communicate across a high-voltage isolation boundary. Its 16-pin SO package contains a galvanically isolated, high-speed CAN physical-layer interface for the two-wire vehicle bus. Placing the device between the controller and the traction-side bus helps isolate the domains without replacing the CAN frame architecture. The main engineering check is that the isolation voltage, supply requirements, timing limits, and automotive qualification meet the battery system's constraints. PCB design must preserve the datasheet's creepage, clearance, capacitor, and copper-barrier requirements.
推薦
Hybrid Vehicle Inverter Communication
The TJA1052IT/2518 is suitable for a hybrid-electric inverter or power-conversion module that communicates through CAN while operating at a potential separated from the vehicle controller. The device provides a galvanically isolated, high-speed interface to a two-wire CAN bus in a 16-pin SO package. This allows the inverter controller and vehicle network to retain a defined isolation boundary. Design verification should compare the module's bus rate, supply domains, common-mode environment, and fault requirements with the NXP TJA1052I datasheet. The layout must also keep high-voltage and low-voltage copper within the prescribed isolation boundary.
推薦
Traction and Motor-Control CAN Interface
The TJA1052IT/2518 can serve as the isolated physical-layer interface for a traction inverter, motor controller, or gate-driver supervisory channel that communicates over CAN. Its high-speed isolated CAN function bridges a digital controller and the two-wire vehicle network while separating their electrical domains. The 16-pin SO package is particularly useful when an existing vehicle PCB reserves that footprint. Engineers should confirm maximum bus rate, propagation delay, loop delay, supply tolerance, and isolation rating against the motor-control timing budget. External bus protection and correct end-of-network termination remain necessary for reliable operation.
推薦
Automotive Body and Comfort Network
The TJA1052IT/2518 can be evaluated for body, comfort, and auxiliary CAN networks that require isolation from a high-voltage subsystem. The isolated interface retains the physical two-wire CAN architecture while providing a 16-pin surface-mount device suitable for compact automotive electronics. Compared with a non-isolated transceiver, its key design value is the separation between controller-side and bus-side domains. Qualification must include the exact vehicle environmental requirements, wake/sleep behavior, bus fault handling, and protection strategy. The component is most appropriate where the isolation barrier has already been incorporated into the system architecture rather than added only as a layout afterthought.
推薦
Industrial High- and Low-Voltage CAN Link
The TJA1052IT/2518 can bridge a high-speed CAN controller and a physical two-wire CAN bus in industrial equipment where the bus and controller operate at different ground potentials. Although NXP targets EV and HEV systems, the galvanically isolated interface can support industrial isolation applications after its electrical and environmental limits are verified. The 16-pin SO package simplifies integration into compact controller boards. Designers should review isolation withstand voltage, transient immunity, bus common-mode limits, supply sequencing, and temperature range. The PCB isolation zone must be based on the manufacturer layout guidance rather than visual separation alone.
推薦
Charging and Auxiliary Power CAN Network
The TJA1052IT/2518 can support CAN communication in charging equipment or an auxiliary power domain where a low-voltage controller must remain separated from a high-voltage or externally exposed bus. The high-speed, galvanically isolated physical layer works with a two-wire CAN network and fits a 16-pin SO footprint. Its use can simplify system partitioning by allowing the communication controller to operate from its own supply domain. Before implementation, verify the charging system's bus rate, isolation lifetime, fault-energy exposure, and protection component requirements. Maintain the prescribed clearance and creepage across the barrier and use appropriately rated barrier capacitors.
推薦
推薦產品摘要
工程參考資料,適用於 TJA1052IT/2518 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TJA1052IT/5Y | TJA1052IT/2Y | ISO1042DW | ISO1042-Q1 | TJA1052IT1 |
|---|---|---|---|---|---|---|
| Package | 16-SO | 16-SO | 16-SO | 16-pin SO package | 16-pin SO package | 16-SO |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Texas Instruments | Texas Instruments | NXP Semiconductors |
| Primary Function | Galvanically isolated high-speed CAN transceiver | Isolated half CAN transceiver | High-speed CAN transceiver | Isolated CAN transceiver | Isolated CAN transceiver | TJA1052IT family CAN transceiver |
| Isolation | Galvanic isolation | Galvanic isolation | Galvanic isolation | Galvanic isolation | Galvanic isolation | Galvanic isolation |
| Pin-Function Compatibility | NXP TJA1052i 16-pin assignment | Same family and package assignment | Same family and package assignment | Standby-related pin becomes no-connect | Multiple pin differences require review | Same family and package assignment |
| Target Application | Electric and hybrid electric vehicles | Automotive isolated CAN application | Automotive isolated CAN application | Isolated CAN applications | Automotive isolated CAN applications | TJA1052IT family automotive application |
主要差異化特點
- Same-family replacement preserves the NXP isolation architecture (對比ISO1042DW)
- Automotive-grade option remains in the same NXP footprint (對比TJA1052IT/2Y)
- Direct TJA1052IT family continuity (對比ISO1042-Q1)
設計說明
合規資訊
The manufacturer datasheet and product page establish the device function and automotive isolation use, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not available for extraction. The related ISO1042-Q1 name does not establish qualification status for the NXP target.